UNIS JETBALL ALLEY G4K Operation Manual

07/23/2021 23 7. TROUBLESHOOTING 7.1 Common Problem Please confirm that all connectors fit tightly. Symptom Possible Cause Recommended action Game will not start Frame assembly connector is loose. Check connector. Frame assembly fault Contact with UNIS Service. Power off Circuit protector make power SW in off state. Turn on power SW again. If appeared again and again, machine has anomaly. Please contact with UNIS Service. Card reader not working The connector is loose. Check connector. Card reader fault. Check with card reader manufacturer. No ticket dispen ...

07/23/2021 30 2. Locate the Sensor. Unplug Sensor connector. Twist the sensor to remove sensor as arrow direction. 3. Replace with the new Sensor and install it in reversed order. Connector Sensor ...

07/23/2021 28 8.5 Motor Replacement Instruction 1. Power off the machine. Utilize Keys to open the Ball track cover. 2. Locate the Motor assembly. Unplug the motor connector. Utilize Phillips screwdriver to loosen the screws to remove Motor assembly. 3. Loosen 4 screws to remove Motor metal plate. Motor assembly Screw Motor assembly Screw Motor metal plate Motor metal plate Motor ...

07/23/2021 24 If you see following error signs showing on the display, please try the recommended action. Display Possible Cause Recommended action The connection part of the IO board and PC are loose. Check and reconnect the loose ports of the PC or IO board. Cable quality problem Change the cable after checking the connection between IO board and PC. Cable became loose during transportation. Check and reconnect the loose cables of the PC or IO board. IO board is faulty. Reboot the game after checking connection and cable problem, if the problem remains un ...

07/23/2021 25 OK to remove the recovery stick. OK to remove the recovery stick. 7.2 System Recovery Operation (NOTE: Do not disconnect power during this process.) 1. Turn off the game. Remove the recovery stick from the machine. (Note: This process may take up to 60 minutes) Insert the recovery stick into the port at the back of the computer. 2. Restart PC to enter the system recovery screen as shown. 3. The game will automatically start recovery. 4. Once system recovery is partially finished (as shown below), and the ICON appears, remove the recovery stick ...

07/23/2021 56 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 D D C C B B A A UNIS Size Ver date A3 =CurrentDate A3 2/2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 J40 C 1 2 3 4 5 6 7 8 9 10 J41 C 1 2 3 4 5 6 7 8 9 10 P 20 30 40 50 60 70 80 90 91 92 93 94 95 96 97 98 21 86 61 72 82 10M 20M 30M 40M 50M 60M 70M 96M 94M 95M 10 20 30 40 50 60 70 80 90 20 30 40 50 60 70 80 90 91 92 93 94 95 96 97 98 21 86 61 72 82 10M 20M 30M 40M 50M 60M 70M 96M 94M 95M 10 20 30 40 50 60 70 80 90 46P 46P A0 46P 46P A0 42x5 42x6 A0x11 10 20 30 40 50 60 70 80 9 ...

07/23/2021 26 We do not recommend using power tools as they may cause damage. NOTICE Back upper door Lock 8.MAINTENANCE & INSPECTION 8.1 Safety Check Check the points listed before operating the machine. These checks are necessary for safe machine operation: 1. Test game before operation each day. 2. Conduct monthly routine checks of game components to ensure good working condition. 3. Check the machine regularly for dust and clean when necessary. Note: Parts and components require preventative maintenance to maintain proper operation. 8.2 Handling Precauti ...

07/23/2021 19 6.2.3 Customized Setting Options Adjustment Value Instruction Photo Restore ON/OFF Save photo or not Photo Time 1_3_5_10 Game Time 30_45_60_75_90 Basic Score 10_20_30_40_50 Game start hole score Bottom Hole Score 0_5 Base bottom hole score Combo Multiple 3_4_5_6_7_8_9_10 Combo score High Score Combo Multiple 5_10_15_20_25_30_35_ 40_45_50 High Score Combo score Highest Score Combo 10_20_30_40_50_60_70 _80_90_100 Highest Score Combo score Bullet Time Basic Score 10_20_30_40_50_60_70 _80_90_100 Bullet Time Increasing Score 5_10_15_20_25_30_35_ 40 ...