Tiger TIGERFLEX SHIPLAP APEX BIKE SHED General Assembly Instructions

File Specifications

Brand: Tiger
Category: Outdoor Storage
Model: TIGERFLEX SHIPLAP APEX BIKE SHED (General Assembly Instructions), prVqG4aLBa.5Y
File Info: Adobe Acrobat PDF (DjVu)
File Size: —
Pages: 16 pages

Download PDF

Download Tiger TIGERFLEX SHIPLAP APEX BIKE SHED Manual (16 pages)

Read Online:

Read the Tiger TIGERFLEX SHIPLAP APEX BIKE SHED General Assembly Instructions online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

Please retain instructions for future reference

09 SIDE PANELS SIDE PANEL D E N65 S50 FLOOR JOIST SIDE PANEL B S50 N65 C SIDE PANEL SIDE PANEL SIDE PANEL FLOOR PANEL FLOOR PANEL ...

Please retain instructions for future reference

CAUTION: All buildings should be erected by two competent adults. CAUTION: It is advisable to wear gloves during building installation. Whilst all products manufactured are made to the highest standards of Safety and in the case of childrens products independently tested to EN71 level, we cannot accept responsibility for your safety whilst erecting or using this product. * TigerSkin® Water Based Treatment: The unique formula of our TigerSkin® pre-treatment provides a reassuring layer of protection for your shed or summer house. Each panel is ca ...

TIGERFLEX® SHIPLAP APEX BIKE SHED ASSEMBLY GUIDE

14 tigersheds.com 0113 205 4189 [email protected] Step 8: FELT INSTALLATION • Roll out felt along lower part of roof, leaving sufficient overhang to fold down onto roof purlin, approx 75mm/3”. Do not fold underneath roof. • Use clout (CN13) nails to tack top of felt into the roof panel. • Repeat for the other side. Fold the overhang at gable ends under the roof panel and tack in place. • Ridge piece should overlap the lower strips and tack into place (if supplied). Step 9: BARGE BOARD & FINIAL INSTALLATION • Fit Barge Boards to t ...

Woodlands DIY Store

Station Yard, Horsforth, Leeds, LS18 5NZ Telephone: 0113 205 4189 Website: tigersheds.com Email: [email protected] INS03 ...

Please retain instructions for future reference

09 SIDE PANELS SIDE PANEL D E N65 S50 FLOOR JOIST SIDE PANEL B S50 N65 C SIDE PANEL SIDE PANEL SIDE PANEL FLOOR PANEL FLOOR PANEL ...

TIGERFLEX® SHIPLAP APEX BIKE SHED ASSEMBLY GUIDE

06 tigersheds.com 0113 205 4189 [email protected] Step 1: FLOOR PANEL INSTALLATION • Install Heavy Duty Bearers as shown • Check your product floor size for the correct diagram (opposite page). Please ensure floor panels are butted up tightly with no gaps • Secure bearers to floor panel using 2x 90mm (S90) screws per bearer. � NOTE�-�Make�sure�fixings�go�through�floor�joists. S90 S90 4FT HEAVY DUTY BEARER 2FT HEAVY DUTY BEARER FLOOR PANEL S90 ...

Tiger TIGERFLEX SHIPLAP APEX BIKE SHED user guide recommended for: 8x12 SpaceMaker, TIGERFLEX MODA, SanRemo 3x4.25, 6417, Solarguard House Style.

⚠️ Download Safety

The Outdoor Storage General assembly instructions (16 pages) is completely safe to download (last scan date: 30/12/2025).

Related PDF Instructions for Tiger TIGERFLEX SHIPLAP APEX BIKE SHED:

Outdoor Storage Equipment: Frequently Requested

Have some Questions about Tiger TIGERFLEX SHIPLAP APEX BIKE SHED Device?

Get valuable and actionable advices from other Tiger TIGERFLEX SHIPLAP APEX BIKE SHED device users. Describe your problem or question, regarding the using of TIGERFLEX SHIPLAP APEX BIKE SHED, in as much detail as possible, and other users will be able to answer you.