Philips 55PFL5922 Operation & User’s Manual

country. • To obtain assistance, contact Philips customer care center; In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands 1 866 202 5960 México D.F. and área metropolitana; 58 87 97 36 Interior de la republica; 01 800 839 19 89 ES Para obtener más información, llame al servicio de soporte al cliente de su país. • Para obtener asistencia, comuníquese con centro de atención al cliente de Philips; En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los Estados Unidos; 1 866 202 5960 México D.F. y área metropolitana; 58 87 97 36 Interior de la republica; 01 800 839 19 89 FR Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de votre pays. • Pour obtenir de l’aide, communiquez avec le centre de service à la clientèle Philips au; Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines; 1 866 202 5960 México D.F. et área metropolitana; 58 87 97 36 Interior de la republica; 01 800 839 19 89 Register your product and get support at www.philips.com/welcome EN User manual ES Manual del usuario FR Manuel d’utilisation 65PFL5922 55PFL5922 50PFL5922 43PFL5922 Televisions 5000 series

2 Getting started ................................................................... 8 Features 8 Supplied accessories 8 Symbols used in this User manual 8 Unpacking 9 Installing the stands 10 Lifting the TV set 12 Removing cardboard 12 Installing the remote control batteries 12 Remote control 13 Control panel 14 Terminals 14 Connecting Antenna or Cable / Satellite / IPTV set-top box 15 Plugging in the AC power cord 15 Selecting your connection quality 16 Connecting your devices 16 TV initial setup 20 Chromecast built-in TV setup 22 3 Use your TV ....................................................................... 23 Switching on your TV and putting it in standby mode 23 Adjusting volume 23 Switching channels 23 Watching channels from an external device 24 Create a list of favorite channels 24 Changing Picture format 25 TV screen information 26 Using options menu 26 USB 27 4 Getting more from your TV ...................................... 30 Picture and sound setup 31 TV settings 31 Picture 31 Sound 33 Chromecast Built-in TV settings 34 Features 34 Installation 35 Accessibility 37 Search for channels 38 Install channels 38 Channel settings 39 Channel installation 39 Child lock 39 Change PIN 41 Digital audio language 41 Mono/Stereo 41 Update software 41 Preparing for the software upgrade 41 Downloading the software 41 USB upgrade 42 Network updates 42 Software settings 43 Software 43 5 Useful tips ........................................................................... 44 FAQ 44 Troubleshooting tips 45 6 Information ........................................................................ 47 Glossary 47 Maintenance 47 7 Specifications ................................................................... 48 8 Warranty ............................................................................. 49 License .......................................................................................... end of book • Displays and illustrations may differ depending on the product you purchase. 2 .English

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN The caution marking is located on the rear or bottom of the cabinet. CAUTION Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out. Register Online at www.philips.com/welcome to ensure: Register online today at www.philips.com/welcome today to get the most benefits from your purchase. *Product safety notification *Additional benefits By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect. Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION: Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond. For fastest support visit us online for chat and self service solutions at www.philips.com/support CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury. TUNE IN TO SAFETY • ALWAYS follow the manufacturer’s recommendations for the safe installation of your television. • ALWAYS read and follow all instructions for proper use of your television. • NEVER allow children to climb on or play on the television or the furniture on which the television is placed. • NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers. • ALWAYS install the television where it cannot be pushed, pulled over or knocked down. • ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed. WALL OR CEILING MOUNT YOUR TELEVISION • ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television. • ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL). • ALWAYS follow all instructions supplied by the television and mount manufacturers. • ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer. • Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation. MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME • Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions. • ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight. • NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb. • ALWAYS make sure your older CRT television does not hang over the edge of your furniture. 3 .English

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments / accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 1 1. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. 14. Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Example of antenna grounding as per NEC - National Electric Code ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) GROUND CLAMPS Wall mount bracket kit Brand Model # Screw dimension 65PFL5922 55PFL5922 50PFL5922 SANUS F80b M6 x 1.378” (35mm) 43PFL5922 SANUS 25BB M4 x 1.378” (35mm) • Your TV meets the VESA standard for wall mounting. Consult with your local dealer for a wall mount bracket which is compatible with your TV model. • The recommended wall mount bracket kit (sold separately) allows the mounting of the TV on the wall. • For detailed information on installing the wall mount, refer to the wall mount Instruction book. • Funai Corporation is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV wall mount bracket or mount the TV onto the bracket on your own. • The wall mount bracket must be installed by experts. Funai Corporation is not liable for these types of accidents or injuries noted below. • Install the wall mount bracket on a sturdy vertical wall. • If installed onto a ceiling or slanted wall, the TV and wall mount bracket may fall which could result in a severe injury. • Do not use screws that are longer or shorter than their specified length. If screws too long are used this may cause mechanical or electrical damage inside the TV set. If screws too short are used this may cause the TV set to fall. • Do not fasten the screws by excessive force. This may damage the product or cause the product to fall, leading to an injury. • For safety reasons use 2 people to mount the TV onto a wall mounting bracket. • Do not mount the TV onto the wall mounting bracket while your TV is plugged in or turned on. It may result in an electrical shock injury. When installing the unit on the wall, allow this much space. Top : 1 1.8 inches (30cm) Left and right side : 5.9 inches (15cm) Bottom : 3.9 inches (10cm) 4 .English

owners. Funai Corporation reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this Owner’s manual is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Funai Corporation warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. Funai Corporation cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Funai Corporation will be adapted and published on the Funai Corporation support website as soon as possible. Pixel characteristics This LCD product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. Warranty No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by service centers and official repair shops. Failure to do so shall void any warranty, stated or implied. Any operation expressly prohibited in this manual, any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty. Federal communications commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. Declaration of conformity Trade name : PHILIPS Responsible party : Funai Corporation, Inc. Model : 65PFL5922, 55PFL5922, 50PFL5922, 43PFL5922 Address : 12489 Lakeland Road, Santa Fe Springs, CA 90670, USA* Telephone number : 1 866 202 5960 * This is not the mailing address for Open Source Software or Customer service. Modifications This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference. Any modifications to the apparatus must be approved by Funai Corporation. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made. Cables Connections to this device must be made with shielded cables with metallic RFI / EMI connector hoods to maintain compliance with FCC Rules and regulations. Canadian notice CAN ICES-3 (B)/NMB-3 (B) Analog and digital television receiving apparatus, Canada BETS-7 / NTMR-7. The following FCC/IC RSS applies to the wireless LAN adapter included in this product. FCC caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country code statement For product available in the USA market, only channel 1~1 1 can be operated. Selection of other channels is not possible. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that do not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. 5150-5250 MHz band is restricted to indoor operations only. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Compliance with IC requirement RSS-210 A9.4.4 Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. 5 .English

• Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV. • Make sure to hold the upper and bottom frames of the unit firmly as illustrated. • Install the unit in a horizontal and stable position. • Do not install the unit in direct sunlight or in a place subject to dust or strong vibration. • Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction. • When installing this unit in a temperate environment, avoid a place with rapid temperature changes. –Operating temperature: 41°F (5°C) to 104°F (40°C) • This unit should not be used in a tropical environment as it has not been evaluated under such conditions. • No objects should be placed directly on or under this unit, especially lighted candles or other flaming objects. • Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit. • Do not insert the AC power cord into the power socket outlet before all the connections are made. • Ensure that you always have easy access to the AC power cord and outlet to disconnect the TV from the AC outlet. • Before you move the TV, disconnect attached cables to prevent damage to connectors, especially the TV tuner. • Be sure to unplug the AC power plug from the AC outlet before moving or carrying the unit. • When moving the TV and then setting it down, please be careful not to pinch the AC power cord under the unit. • Do not place this unit in an area where it may be exposed to water, oil or grease such as: near a bathtub, basin, kitchen sink, washing tub, swimming pool, kitchen exhaust fan, etc., or in a damp basement. Regulatory notices WARNING : To prevent injury, this apparatus must be securely attached to the furniture / wall in accordance with the instructions. Tipping, shaking or rocking the unit may cause injury / death. WARNING : Never place a TV in an unstable location. A TV may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: –Using cabinets or stands recommended by the manufacturer of the TV. –Only using furniture that can safely support the TV. –Ensuring the TV is not overhanging the edge of the supporting furniture. –Not placing the TV on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a suitable support. –Not placing the TV on cloth or other materials that may be located between the TV and supporting furniture. –Educating the children about the dangers of climbing on furniture to reach the TV or its controls. If your existing TV is being retained and relocated, the same considerations as above should be applied. Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. In order to avoid interruption of ventilation, this unit should not be placed in built-in equipment such as a book cabinet, rack, etc., and the vents of this unit should not be covered with anything such as a tablecloth, curtain, newspaper, etc. Make sure that there is enough ventilation space (4�inches / 10�cm or more) around this unit. Press � to turn the unit on and go into standby mode. To completely turn off the unit, you must unplug the AC power plug from the AC power outlet. Disconnect the AC power plug to shut the unit off when trouble is found or not in use. The AC plug shall remain readily available. AC power plug Never use a gas duster on this TV. The gas trapped inside of this unit may cause ignition and explosion. Environmental care The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging. For product recycling information, please visit - www.recycle.philips.com End of life directives Philips pays a lot of attention to produce environmental-friendly products in green focal areas. Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations. � Batteries usage CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING : Batteries (battery pack or battery installed) should not be exposed to excessive heat such as sunshine, fire or the like. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh,�Li-ion, etc.) batteries. Disposal of used batteries The batteries supplied do not contain the heavy metals mercury and cadmium, however in certain localities, disposing batteries with household waste is not permitted. Please ensure you dispose of batteries according to local regulations. Preparing to move / ship the unit Please pack the unit properly by following the diagram on the carton (as noted below). • To avoid damage to the screen, do not pack the stand on the same side as the TV screen, refer to the illustration above. 6 .English

respective owners. The terms HDMI and HDMI High- Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Sonic Emotion and the Sonic Emotion logo symbol are registered trademarks of sonic emotion ag. Portions of this software are copyright © The FreeType Project (www.freetype.org). The American Academy of Pediatrics discourages television viewing for children younger than two years of age. Some features may require an always-on broadband internet connection, firmware update and/or a minimum bandwidth. Internet services vary by location. Funai Corporation Inc. does not warrant access to the portal or to any of the services, content, software and advertising. Funai Corporation Inc. may, in its sole discretion, add or remove access to any specific services, content, software and advertising at any time. Although Funai Corporation Inc. will strive to provide a good selection of services, content or software, Funai Corporation Inc. does not warrant continued access to any specific services, and content or software. 7 .English

Features • DTV / Analog TV / CATV You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable and satellite subscribers can access their TV channels. • Information display You can display on the TV screen the title, contents (DTV only) and other information on the current program. • Autoprogram This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures. • Net TV This unit lets you enjoy internet services. Use the remote control to browse the Net TV pages. You can play movies and much more, all from your TV screen. • Child lock This feature allows you to block children’s access to inappropriate programs. • Closed caption decoder Built-in closed caption decoder displays text for closed caption supported programs. • MTS / SAP tuner Audio can be selected from the remote control. • Auto standby If there is no input signal and no operation for 15 minutes, the unit will go into standby mode automatically. • Sleep timer You can set the unit to go into standby mode after a specific amount of time. • Choices for on-screen language Select your on-screen language: English, Spanish or French. • Stereo sound function • PLL frequency synthesized tuning Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point “•” keys on the remote control. • Various adjustments for picture and sound Customizes picture quality suitable for your room and sets your sound preference. • EasyLink via HDMI link EasyLink allows your other HDMI link devices to be controlled by the HDMI cable connected to your TV. • HDMI input • HDMI-DVI input If your video device has a DVI output jack, use an HDMI-DVI conversion cable to connect the unit. • Component video input • PC input • AV input Audio and video input from an external device. • USB terminal The picture, music and video files stored on a USB memory stick can be played back on this unit. • Digital audio output • Headphone audio output Headphone 3.5mm stereo jack for personal listening. Supplied accessories CAUTION: READ THIS FIRST 4 4 4 65PFL5922 55PFL5922 50PFL5922 43PFL5922 65” 55” / 50” / 43” Quick start guide User manual Caution sheet TV base and Screws (AAA, 1.5V x 2) Remote control and Batteries Size Quantity Model Screws packed with this unit. M4 x 0.984”(25mm) M4 x 0.709”(18mm) M4 x 0.551”(14mm) * Caution sheet is not included in 43PFL5922. Chromecast built-in TV Setup Guide for Initial Installation Note(s) • If you lose the screws, please purchase the above-mentioned Phillips head screws at your local store. • If you need to replace these accessories, please refer to the part name or No. with the illustrations and call our toll free customer support line found on the cover of this User manual. W When using a universal remote control to operate this unit. • Make sure the component code on your universal remote control is set to our brand. Refer to the instruction book accompanying your remote control for more details. • We do not guarantee 100% interoperability with all universal remote controls. Symbols used in this User manual The following is the description for the symbols used in this User manual. Description refers to: Digital TV operation Cable / NTSC (Analog) TV operation • If neither symbol appears, the operation is applicable to both. 8 .English Continued on next page.

box. Be careful not to injure your fingers and keep children away during assembly. (65PFL5922) 1 Open the top flaps of the box. 2 Remove all accessories. Caution(s) • DO NOT take the TV set out of the box yet. 3 Remove the packing joints from the box. 4 Remove the outer slipbox with care. 5 Support the top of the TV set with a hand to prevent the TV from falling. 6 Unhinge the retaining tabs and unfold the left and right side of the bottom packaging. 9 .English Continued on next page.

2 Remove all accessories. 3 Prepare a table and cover the top of it with a table cloth, blanket or such to avoid damage to the TV set. Support both sides of the TV set and, move it onto the table. 4 Carefully lay the TV set, with the screen side down, on the table so as not to deform or damage Decoration plate of the bottom of the unit. Protect the plate with care Installing the stands (65PFL5922) 1 Remove both of the bottom polystyrene foam bases. Carefully tear the plastic bag until the bottom corner of the TV is exposed. • Support the top of the TV set at all times to prevent the TV from falling. Caution(s) • Before installing the matching stand, remove the protective cardboard and carefully peel away the film from the area so that it will not get stuck between the unit and the stand. 2 Lift up one side of the TV approx. 1 inch (2.5 cm) and insert the matching stand upward until it fits the main unit. 3 Fasten the matching stand to the TV with 2 screws (included). 2 screws required 4 In the same manner as step 2, install the other stand. 10 .English Continued on next page.

2 screws required 6 Both stands should now be securely fastened. (55PFL5922, 50PFL5922) 1 Remove the tape on the bottom of the TV set and the plastic bag. 2 Fasten the matching stand to the TV with 2 screws (included). While fastening the screws, hold the stand to prevent it from falling. Caution(s) • Before installing the matching stand, remove the protective cardboard and carefully peel away the film from the area so that it will not get stuck between the unit and the stand. 2 screws required 3 Fasten the other stand to the TV with 2 screws (included). While fastening the screws, hold the stand to prevent it from falling. 2 screws required 4 Both stands should now be securely fastened. 11 .English Continued on next page.

• A Phillips-head screwdriver is required to fasten the stands to the TV set. • When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit. • To remove the stand from this unit, unscrew the Phillips-head screws by reversing the procedure. Be careful not to drop the stand when you remove it. Lifting the TV set Carefully lift the TV set as shown in the illustration and place it onto a stable, level surface. Removing cardboard Remove the cardboard attached to the screen. You are now ready to set up and enjoy your Philips TV. Installing the remote control batteries 1 Slide the battery cover off the back of the remote control. 2 Insert the two supplied batteries (AAA, 1.5V). Be sure the + and – ends of the batteries line up with the markings inside the case. 3 Slide the cover back into position. Note(s) • Remove the batteries if not using the remote control for an extended period of time. 12 .English Continued on next page.

Turns the TV on from standby or off to standby. � ��SOURCE Selects connected devices. � EasyLink buttons �� / �� : Searches backward or forward through the disc. � � : Starts, pauses or resumes playback. � : Stops the disc playback. � / � : Skips backward or forward chapters, titles or tracks on a disc. Note(s) • Pause may not work properly on some devices even if they are EasyLink (HDMI CEC) compliant. � SAP Selects audio mode (MONO / STEREO / SAP) / audio language. � MENU Displays the main menu. � COLOR buttons Works as direct access to user specified net apps. � ��INFO Displays information about the current program. � OK Press to decide the command of setting when the Main menu is displayed. � ������� (NAVIGATION buttons) Moves the cursor, selects the on-screen menu items. � ��OPTIONS Displays a list of menu items applicable to the highlighted object or screen. � CH + / – Selects a channel. � 0 - 9 (NUMBER buttons) Used to enter a channel / program number. • (DOT) : Use with 0-9 to select digital channels. For example, to enter 2.1, press PREV.CH : Returns to the previously viewed channel. � � (MUTE) Turns the sound on and off. � VOL + / – Adjusts the volume. � ��BACK Returns to the previous menu operation. � ��FORMAT Adjusts the picture size on the TV screen. � CC Selects closed caption settings (Off, On, CC w/ mute). � Chromecast Switches to Chromecast built-in TV input source. 13 .English Continued on next page.

Receives IR signal from remote control. � CH + / – Selects a channel. In the menu screen, moves the cursor up (+) / down (–). � ��(POWER) Turns the TV on or switches the TV into standby mode. � MENU Opens the main on-screen menu. � SOURCE Selects connected devices. � VOL + / – Adjusts the volume. In the menu screen, moves the cursor left (+) / right (–). VOL + : Volume up VOL – : Volume down Terminals m n g k h j l i � 75 ohm cable / Antenna connection Signal input from an antenna or cable / satellite set-top boxes. � Analog audio (L/R) input jacks Connect analog audio signals from; –HDMI-DVI / Analog audio (L/R) jacks signal –Component video / Analog audio (L/R) jacks signal –Composite video / Analog audio (L/R) jacks signal –PC connection / Analog audio (L/R) jacks signal with stereo mini 3. 5mm plug audio cable on PC � Digital audio output jack Digital audio (S/PDIF) output to home theaters and other digital audio systems. � Component (Y/Pb/Pr) / Composite video (VIDEO) input jack(s) for VIDEO Composite video input (VIDEO) jack is a shared jack with component video input (Y) jack. Green / Yellow color orientation depends on model. � Ethernet port For internet connection using an Ethernet cable with an RJ-45 connector. � HDMI input jack(s) Digital audio and video input from high definition digital devices such as DVD / Blu-ray disc players, cable / satellite set-top boxes, PC’s, etc. * For HDMI 2 only In addition to normal HDMI and HDMI-DVI functionality, it outputs TV audio to an HDMI-ARC-compliant device, such as a home theater system. � Headphone audio output jack Headphone 3.5mm stereo jack for personal listening. � USB terminal Data input from USB memory stick only. Do not connect any device to this terminal such as digital camera, keyboard, mouse, etc. 14 .English Continued on next page.

IPTV set-top box Be sure your antenna or another device is connected properly before plugging in the AC power cord. If connecting to an antenna through an RF cable Any DTV programs that are broadcast in your area can be received for free through an antenna connection. IN IN OUT OUT RF cable RF cable RF cable Antenna Antenna Antenna Cable Cable Cable If connecting Cable / Satellite / IPTV set-top box using an RF cable If the TV is connected to a cable or set-top box via a coaxial connection, set the TV to channel 3/4 or the channel specified by the service provider. IN IN Antenna Antenna Antenna Set-top box Set-top box Set-top box RF cable RF cable RF cable OUT OUT OUT IN IN RF cable RF cable RF cable If connecting Cable / Satellite / IPTV set-top box using an HDMI cable If the TV is connected to a cable / satellite set-top box via an HDMI cable, make sure you select the correct source by using ��SOURCE. IN IN IN IN OUT Set-top box RF cable HDMI cable HDMI cable HDMI cable If connecting Cable / Satellite / IPTV set-top box using component video input If the TV is connected to a cable / satellite set-top box via component video input, make sure you select the correct component video source by using ��SOURCE. Set-top box Set-top box Set-top box IN IN RF cable RF cable RF cable OUT OUT OUT Component (Y/Pb/Pr) video cables Component (Y/Pb/Pr) video cables Component (Y/Pb/Pr) video cables IN IN OUT OUT OUT Audio (L/R) cables Audio (L/R) cables Audio (L/R) cables IN IN Connecting a Cable / Satellite / IPTV set-top box, Blu- ray disc / DVD recorder via composite connectors and analog audio Do not place your recorder too close to the screen because some recorders can be susceptible to harmful interference from the TV. Cable OUT RF cable IN IN IN OUT IN OUT IN IN IN OUT OUT RF cable IN Satellite IN Cable Video + Audio(L/R) cables Video + Audio(L/R) cables Video + Audio(L/R) cables Video + Audio(L/R) cables Blu-ray disc / DVD recorder Set-top box Note(s) • If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information. • Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on these devices is 2,000MHz or 2GHz. • For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit. • If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than a set-top box or inside antenna. • To turn on your reception source easily between antenna and cable, install an antenna selector. • If you are not receiving a signal from your cable service, contact the cable provider. Plugging in the AC power cord Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made. Caution(s) • Connect the analog audio signal cables from the external device to the analog audio L/R input jacks. • If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier. Note(s) • Each time you plug in the AC power cord, no operations will be performed for several seconds. This is not a malfunction. 15 .English Continued on next page.

• Please purchase the necessary cables at your local store. Before you connect the AC power cord: Be sure other devices are connected properly before plugging in the AC power cord. Selecting your connection quality HDMI - Highest quality Supports high-definition digital signals and gives highest picture and sound quality. Video and audio signals are combined in one cable. You must use HDMI for full high-definition video and to enable EasyLink(HDMI CEC). Note(s) • Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form of digital rights management that protects high-definition content in Blu-ray discs or DVDs. • The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows output of TV audio to an HDMI-ARC-compliant device. Component (Y Pb Pr) - High quality Supports high-definition analog signals but gives lower picture quality than HDMI. Component (Y/Pb/Pr) video cables combine red / green / blue video cables with red / white audio (L/R) cables. Match the cable colors when you connect to the TV. Composite - Basic quality For analog connections. Composite video / Audio analog cable usually combine a yellow video cable with red / white audio (L/R) cables. With this unit, yellow cable must be connected to Y (green) jack on the component video input jacks. Connecting your devices HDMI digital connection HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high-definition digital video and multi-channel digital audio through a single cable. HD game console or Blu-ray disc / DVD player or Set-top box OUT IN IN IN HDMI cable HDMI cable HDMI cable Note(s) • If there are issues with picture/color and/or sound when connecting an external device using the HDMI port, please try switching the HDMI mode. (Refer to HDMI mode � p. 35) • Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications. • Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is recommended for the better compatibility. • The unit accepts 480i / 480p / 720p / 1080i, 1080p, 2160p 24/30/60Hz of video signals, 32kHz�/ 44.1kHz and 48kHz of audio signals. • This unit accepts LPCM, AC-3, DD+ audio signal. • This unit accepts only signals in compliance with EIA861. HDMI-DVI connection This unit can be connected to your device that has a DVI terminal. Use an HDMI-DVI conversion cable for this connection and it requires audio cable for analog audio signal as well. Cable receiver or set-top box with the DVI output jack OUT HDMI-DVI conversion cable HDMI-DVI conversion cable HDMI-DVI conversion cable IN IN IN OUT Audio (L/R) cables IN IN IN Note(s) • Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications. • Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is recommended for the better compatibility. • The unit accepts 480i, 480p, 720p, 1080i, 1080p and 2160p video signals. • HDMI-DVI connection requires separate audio connections as well and the audio signals are output as analog (L/R) audio. • DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B. 16 .English Continued on next page.

connected audio device, without the need for an additional digital audio cable. OUT HDMI cable HDMI cable HDMI cable HDMI 2 IN only HDMI 2 IN only HDMI 2 IN only Digital home theater amplifier that supports HDMI-ARC Note(s) • The HDMI 2 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital audio to an HDMI home theater system. • Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to HDMI-ARC connectors. Component analog video connection Component analog video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s component video (Y/Pb/Pr) input jacks, connect analog audio cables to the analog audio (L/R) input jacks. Blu-ray disc / DVD recorder Blu-ray disc / DVD recorder Blu-ray disc / DVD recorder or or Set-top box Set-top box Set-top box OUT OUT OUT Component (Y/Pb/Pr) video cables Component (Y/Pb/Pr) video cables Component (Y/Pb/Pr) video cables IN IN IN OUT OUT OUT Audio (L/R) cables Audio (L/R) cables Audio (L/R) cables IN IN Note(s) • The unit accepts 480i, 480p, 720p, 1080i and 1080p of video signals for this connection. Composite analog video connection Composite analog video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s component / composite video (Y/VIDEO) input jack (green), connect audio cables to the audio (L/R) input jacks. When the audio is monaural, then only connect to the audio L input jack. DVD player DVD player DVD player OUT OUT OUT Video + Audio(L/R) cables Video + Audio(L/R) cables Video + Audio(L/R) cables Note(s) • With this unit, yellow cable must be connected to Y (green) jack on the component video input jacks. • Whenever you connect to the composite video input jack (Y/VIDEO), you must disconnect the component video input jacks (Pb and Pr). If you leave those jacks connected, it may cause an unstable picture. Connecting the TV to the internet using an Ethernet cable LAN Internet Internet Internet Network provisioning equipment Network provisioning equipment Network provisioning equipment Ethernet cable Ethernet cable Ethernet cable Note(s) • Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment. • Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging the unit. • If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router. • If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, then add a hub. • For a broadband router, use a router which supports 10BASE-T / 100BASE-TX. • Do not connect your PC directly to the Ethernet port of this unit. 17 .English Continued on next page.

WLAN LAN Network provisioning equipment Ethernet cable Broadband router Broadband router Broadband router Internet Internet Internet Note(s) • Use a wireless LAN Access Point (AP) (e.g. broadband wireless router) which supports IEEE 802.1 1 a/b/g/n/ac. (n is recommended for stable operation of the wireless network.) • This unit does not support Ad-hoc mode. • Other radio devices or obstacles may cause interference to the wireless network connection. Digital audio output connection If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Use a digital audio optical cable to connect the unit to external digital audio devices. Digital home theater amplifier OUT OUT OUT IN IN Digital audio optical cable Digital audio optical cable Digital audio optical cable PC connection HDMI connection This unit can be connected to your PC that has an HDMI terminal. Use an HDMI cable for this digital connection. PC PC OUT OUT OUT HDMI cable HDMI cable HDMI cable IN IN HDMI-DVI connection This unit can be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this video digital connection and it requires stereo mini 3.5mm plug audio cable for analog audio signal as well. PC PC OUT OUT OUT HDMI-DVI conversion cable HDMI-DVI conversion cable HDMI-DVI conversion cable IN IN IN OUT OUT OUT Stereo mini 3.5 mm plug audio cable Stereo mini 3.5 mm plug audio cable Stereo mini 3.5 mm plug audio cable IN IN IN 18 .English Continued on next page.

Format Resolution Refresh rate VGA 640 x 480 60Hz SVGA 800 x 600 XGA 1,024 x 768 WXGA 1,280 x 768 1,360 x 768 FHD 1,920 x 1,080 24/30/60Hz UHD 3,840 x 2,160 4,096 x 2,160 Other formats or non-standard signals will not be displayed correctly. Note(s) • Please purchase a HDMI-DVI conversion cable that has a ferrite core. • The following operations may reduce noise. –Attach a ferrite core to the AC power cord of your PC. –Unplug the AC power cord and use the built-in battery of your portable / laptop PC. • Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications. • Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is recommended for the better compatibility. • The unit accepts 480i, 480p, 720p, 1080i, 1080p and 2160p video signals only when using the HDMI connection and HDMI-DVI connection. • HDMI-DVI connection requires separate audio connections as well and the audio signals are output as analog (L/R) audio. • DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B. USB memory stick This unit offers easy playback of picture, music and video files. Insert the USB memory stick into the USB terminal shown below. For a complete list of file formats and specifications supported, refer to USB Section � p. 27 Note(s) • The unit recognizes only a USB memory stick. • Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit. (Not supported.) • Always insert a USB memory stick directly to this unit. • A USB memory stick is not supplied with this unit. • We do not guarantee that all USB memory sticks can be supported by this unit. • Be sure to keep a backup copy of the original files on your USB device before you play them back on this unit. We have no responsibilities for damage or loss of your USB stored data. • To protect your USB memory stick files from being erased place the write protect sliding tab in the protect position (if available). • When you are ready to remove a USB memory stick, set the unit to go into standby mode to avoid any damage to your data and the unit. • A USB memory stick that requires its own driver or the device with a special system such as fingerprint recognition are not supported. • This unit is not allowed to use the USB memory stick which requires an external power supply (500mA or more). 19 .English Continued on next page.

Some may also be accessible by the main unit's control panel. TV initial setup This section will guide you through the unit’s Initial setting which includes selecting a language for your on-screen menu, country, location and Autoprogram, which automatically scans and memorizes viewable channels. You can also set the network connection in this setting. BBefore you begin: Make sure the unit is connected to an antenna or cable. 1 After making all the necessary connections, press � to turn on the unit. • It may take a few moments to turn on the unit for the first time. • TV initial setup menu appears automatically after the unit is turned on. 2 Follow the on-screen instructions to complete your TV initial setup. 23 1 Remote control Batteries Thank you for purchasing this Philips Chromecast built-in TV. Merci d'avoir acheté ce Chromecast built-in TV de Philips. Gracias por comprar esta Chromecast built-in TV de Philips. Insert 2 batteries in the remote control Ponga las 2 baterías en el control remote Insérez les 2 piles dans la télécommande Next 3 Use ��� to select the location in the middle of the TV screen, then press OK. 1 3 2 Home Retail -Location: “Home” mode is optimized for efficient energy usage for home use. “Retail” mode is optimized for Store Demo with fixed settings. -Région: Le mode « Home » est optimisé une utilisation efficace de l'énergie pour un usage à domicile. Le mode « Retail » est optimisé pour la démonstration en magasin avec des réglages fixes. -Ubicación: El modo "Home" está optimizado para el uso eficiente de energía para uso en casa. • Selecting Location to Retail will display retail demo on the screen. If you wish to turn off this demo in a retail environment, please refer to Retail Demo � p. 36. 4 Use ��� to select the standby mode in the middle of the TV screen, then press OK. • Active standby enables the TV to turn on fast, whereas ECO standby is consumes less energy. 5 After the standby mode setting is completed, Chromecast built-in TV setup screen will appear. • For Chromecast built-in TV setup, refer to Chromecast built-in TV setup � p. 22. • Chromecast built-in TV is controlled from devices on the same Wi- Fi network, such as Smartphones, Tablets, or computers. • After Chromecast built-in TV setup is completed, if you press any button except Chromeast (button), TV initial setup resumes. 6 On Chromecast built-in TV setup screen, if you press MENU, select OK and press OK to continue, the built-in initial setup wizard will continue. 7 Use ��� to select the on-screen language, Voice guide and TV placement in the middle of the TV screen, then press OK. 8 Use ��� to select the signal type. • If the TV is connected to a cable or satellite set-top box, select the 2nd one and skip to step 10. 12 4 3 Installation Set-top box Select "Set-top box" to set up a TV signal from a cable TV box or satellite TV receiver. Antenna Select "Antenna" to set up a TV signal from a cable TV wall jack or a standard TV antenna. 20 .English Continued on next page.

channels, then press OK. 123 4 Installation Skip Cable Antenna Now select either Antenna or Cable, using up/down key of the remote control. Once you have made your selection, press the OK button to proceed. Make sure that you have attached your antenna or cable signal into the jack on the back of your TV labeled "ANTENNA IN". –When Antenna is selected, the TV detects antenna signals. It searches for DTV and analog TV channels available in your area. –When Cable is selected, the TV detects signals supplied by cable. It searches for DTV, analog TV and cable channels available in your area. • Auto programming will begin. 0 0 123 4 Installation Stop Total progress: Analog channels found: Digital channels found: Please wait until you see the Auto Programming complete message. Digital channels will take longer than Analog to find and program. Auto programming may take more than 20 minutes to complete. System searching. Please wait… 10 Use ��� to select your preferred picture setting, then press OK. 2 1 Sports Vivid Standard Skip Please select your preferred picture mode. 11 Use ��� to select your preferred sound setting, then press OK. 2 1 Sports Vivid Standard Skip Please select your preferred sound mode. 12 After TV initial setup is completed, a message will appear if there is a software update available for the TV. Note(s) • If you are not receiving a signal from your cable service, contact the cable provider. • If you press � during Autoprogram, this setup of TV channels will be cancelled. • The initial Autoprogram function can be executed for either Antenna or Cable only once. When you change the connection (Antenna / Cable), select Search for channels again. � p. 38 After an TV initial setup is completed... • If you want to scan the channels automatically again. Search for channels � p. 38 • If you want to change to another language. Language � p. 35 • If you want to change the location setting. Location � p. 35 • If you want to restore the picture and sound setting. Picture and sound setup � p. 31 • If you want to change the Chromecast built-in TV setting. Chromecast built-in TV setup � p. 22 21 .English Continued on next page.

Prerequisites for Chromecast built-in TV setup • iOS or Android™ Smartphone / Tablet with Bluetooth and location services turned on. • Have your wireless router’s SSID and password handy. 1 During TV initial installation • As the TV initial installation proceeds, the “Set me up” screen for Chromecast built-in TV setup will appear. Refer to the step 5 in TV initial setup � p. 20. • From here on, you need to use your mobile device to set up Chromecast built-in TV. 2 App download / installation • On your mobile device, access the URL to download and install the Google Home App. http://www.chromecast.com/setup for iOS for Android™ 3 App configuration • Run the Google Home App. If the “DEVICES” icon appears on your mobile device, touch the icon to proceed, then select the same device name (Chromecast****) as the one shown at the bottom left corner of the TV screen. • The “CONTINUE” button appears on your mobile device. Pressing it moves to the 4-letter code screen. Confirm that the code on your mobile device matches the code shown on the TV screen. If they match, press the “I SEE THE CODE” button on your mobile device. 4 Network configuration • The “OK” button appears on your mobile device, complete settings on this screen and then touch “OK” to proceed. Pressing it moves to the wireless network setting screen. Select your wireless network name (SSID) and enter the password to proceed. 5 Ready to Cast • Chromecast built-in TV setup has completed. Now, your TV is ready to receive a Cast from your mobile device. If a newer firmware is available, update will start. 6 Casting a video • On a Cast-enabled App such as YouTube™, tap the Cast icon � to cast the video to your TV. X:XX XX:XX X:XX XXX views XXX subscribers XX XX XX:XX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXX Subscribe XX:XX XXXXXX XXX views - X month ago XXXXXXXXXXXX XXXXXX XXX views - X month ago XXXXXXXXXXXX 7 For TV viewing • In order to view TV, the TV initial installation needs to be completed after the Chromecast built-in TV setup. On the TV remote control, press ��SOURCE and select any input other than Chromecast built-in TV. The screen will switch to the selected source and prompt you to complete the remainder of the initial setup wizard. Note(s) • For more info, www.google.com/cast/learn/ www.philips.com/support Note(s) • The Chromecast built-in TV setup instructions in this user manual are current as of the publication release of this document. Google continuously releases updates to its apps; if there is a discrepancy between the app and instructions on this page, please follow the setup instructions within the app. 22 .English

Switching on your TV and putting it in standby mode Remote control TV To turn the TV on from standby or off to standby • Press � on the TV or the remote control. Note(s) • Energy consumption contributes to air and water pollution. When the AC power cord is plugged in, your TV consumes energy with a very low standby power consumption. Adjusting volume Remote control TV To decrease or increase volume • Press VOL + / – on the TV or the remote control. VOL + : Volume up VOL – : Volume down To mute or unmute sound • Press � on the remote control to mute the sound. • Press � again or VOL + / – to recover the original sound. Switching channels Remote control TV To select channels by using CH + / – • Press CH + / – on the TV or the remote control. To select channels by using the NUMBER buttons Digital TV operation • For digital channels, press a number followed by a dot “•” and the corresponding sub channel number. –When selecting digital channel 1 1. 1 Be sure to press • before entering the subchannel number. Cable / NTSC (Analog) TV operation –When selecting cable or analog channel 1 1 Press PREV.CH to return to the previously viewed channel. Note(s) • To select the non-memorized channels, use the NUMBER buttons. • Channel not available or No signal will appear on the TV screen after the subchannel broadcast is over. • Audio only message will appear on the TV screen, when you receive only sound signal. 23 .English Continued on next page.

device Switching each input mode can easily switch with the remote control between TV and external devices when they are connected to the unit. 1 Turn on the set-top box or the connected device. � Press ��SOURCE and use ��� to select the set-top box or the connected device and wait a few seconds till the picture appears. HDMI3 HDMI2 HDMI1 Cast TV � Use the remote control of the set-top box or the connected device to select channels. Lock or unlock your device from the menu This section describes how to lock or unlock specified device. 1 Press ��SOURCE on the remote control. 2 Use ��� to select a device to lock or unlock. 3 Press ��OPTIONS on the remote control. 4 Use ��� to select Lock or Unlock, then press OK. • If device lock is unlocked, Lock will be displayed. If device lock is locked, Unlock will be displayed at the top right of the device icons. 5 Enter your PIN. Change PIN � p. 41 Changing device type You can change device icons displayed in the source list. 1 Press ��SOURCE on the remote control. 2 Use ��� to select the desired device. 3 Press red button on the remote control. 4 Use ��� to select the desired type, then press OK. TTo reset the type • Press ��OPTIONS on the remote control at step 3, then select Original icon. Scan connections You can rescan TV connections and update the source list. Before you begin: You must set On in Master EasyLink. � p. 36 1 Press ��SOURCE on the remote control. 2 Use ��� to move the cursor to any device. 3 Press ��OPTIONS on the remote control. 4 Use ��� to select Scan connections, then press OK. Create a list of favorite channels You can create lists of your preferred TV channels so that you can find those channels easily. 1 Press OK while viewing a TV program. 2 Use ������� to select the desired channel, then press yellow button. 3 Use ��� to select the desired favorite list (Favorites 1 - Favorites 4), then press OK to add or remove on the list of favorite channels. • � indicates that the channel is added. • � indicates that the channel is removed. • The channel will be marked with � icon. Display the list of favorite channels 1 Press OK while viewing a TV program. 2 Use ������� to select Favorites. To change the favorite list 1 Press blue button. 2 Use ��� to select the desired favorite list (Favorites 1 - Favorites 4). To remove a channel from the favorite list 1 Select the desired channel, then press yellow button. 2 Use ��� to select Yes, then press OK. 24 .English Continued on next page.

Display modes can be selected when your TV receives a 16:9 or 4:3 video signal. Three types of display modes can be selected for a PC input signal. Press ��FORMAT repeatedly to switch the TV aspect ratio. For 16:9 video signal (4096 x 2160p) Full Unscaled For 16:9 video signal (3840 x 2160p) Full Unscaled For 16:9 video signal (not 2160p) Wide screen 4:3 Automatic Full Automatic Other than DTV and HDMI connected devices, enlarges the picture to best fit the screen. DTV and HDMI connected devices display the picture at its original size. The subtitles may remain visible. 4:3 Displays a 16:9 picture at a 4:3 size; the picture is shortened horizontally. Sidebars appear on both edges of the screen. Wide screen Displays a 16:9 picture that is stretched horizontally and vertically. Unscaled Displays a 16:9 picture at its original size. Full Displays a scaled 16:9 picture. Bars appear on both the upper and lower portions of the screen depending on the type of video signal. For 4:3 video signal Wide screen Movie expand 16:9 Movie expand 14:9 4:3 Super zoom Automatic Automatic Other than DTV and HDMI connected devices, enlarges the picture to best fit the screen. DTV and HDMI connected devices display the picture at its original size. The subtitles may remain visible. Super zoom Displays a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically and its left and right edges are enlarged. This crops out some of the top and bottom of the picture. 4:3 Displays a 4:3 picture at its original size. Sidebars appear on both edges of the screen. Movie expand 14:9 Displays a 4:3 picture at a 14:9 size; the picture is stretched horizontally and vertically. This crops out some of the top and bottom of the picture. Sidebars appear on both edges of the screen. Movie expand 16:9 Displays a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically. This crops out some of the top and bottom of the picture. Wide screen Displays a picture that is stretched out of proportion to fill the screen. For PC input signal Unscaled Wide screen 4:3 • This unit can also be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this video connection and it requires stereo mini 3.5mm plug audio cable for analog audio signal as well. • Refer to 16:9 video signal on this page if the PC has HDMI output. 4:3 Displays a proportionately stretched picture. Sidebars appear on both edges of the screen. Wide screen Displays a picture that is stretched out of proportion to fill the screen. Unscaled Displays a picture in its original size. If the signal source has side or top-bottom bars inserted into the picture, the Picture format function will not eliminate them. 25 .English Continued on next page.

You can display the currently selected channel or other information such as the aspect ratio on the TV screen. In the digital mode, the detailed broadcasting information for the current off-the-air channel such as program title and program guides are displayed. 1 Press ��INFO. e f g i h b a c d 1 1.1 KABC A Day of Memories 1080i None All English Stereo Full Sleeptimer: Rating: Favorites: Audio language: Sound mode: Picture format: Resolution: English audio with description. Close � Channel number / Input mode Switching channels � p. 23 Watching channels from an external device � p. 24 � Broadcast station � Program title (for DTV only) � CC (not available if Closed caption is set to Off) Caption settings � p. 37 � Program’s image aspect ratio Changing Picture format � p. 25 � Audio language (DTV) / Audio mode (Analog TV) Sound � p. 33 � Favorites Create a list of favorite channels � p. 24 � Child lock rating Child lock � p. 39 � Remaining time on sleep timer Sleeptimer � p. 34 2 Press ��INFO to hide the information. Note(s) • While the program guide is displayed, the closed caption function is interrupted. • The information display will automatically disappear in 5 seconds. Using options menu You can access to some TV settings directly by using ��OPTIONS. 1 Press ��OPTIONS to display options menu, then press OK. 2 Use ������� to select a desired setting, then press OK. a b c d Options � Options Following settings can be configured. Voice guide toggle To set Voice guide on or off. Voice guide toggle � p. 37 Closed captions To choose the Closed captions display setting. Closed captions � p. 37 Digital audio language To Select the language according to your preference. (It differs depending on the program.) Digital audio language � p. 41 Mono/Stereo To Select an audio format. Mono/Stereo � p. 41 � Controls If you have our brand products such as Blu-ray disc player or DVD recorder that are compatible with EasyLink functions, connect them to this unit via an HDMI cable so you can simply operate various items from this unit’s remote control. Before you begin: select a device connected to an HDMI connection. � p. 24 You must set On in Master EasyLink. � p. 36 Otherwise, LINK does not work even if you connected our brand devices to this unit. 1 Press ��OPTIONS to display options menu. 2 Use ��� to select Controls then press OK. 3 Use ��� to select the desired item, then press OK. Device-menu Controls the menu of your connected EasyLink device. Device-contents Controls the top menu of your DVD or Blu-ray discs. Device-favorite Controls the pop-up menu of your Blu-ray discs. Note(s) • Some of EasyLink functions may not be available depending on your EasyLink devices or discs. • You must connect this unit to our brand EasyLink devices and be sure its EasyLink (HDMI CEC) setting is also set to On. • We do not guarantee 100% interoperability with other brands of HDMI link compliant devices. 26 .English Continued on next page.

Following settings can be configured. Auto picture To set predefined picture mode. Picture � p. 31 Auto sound To set predefined sound mode. Sound � p. 33 Headphone volume To adjust headphone volume. Sound � p. 33 TV speakers To Select the audio output from the unit’s speakers or not. Sound � p. 33 Picture format To switch the TV aspect ratio. Changing Picture format � p. 25 Setup To display setup menu. � ECO settings Following settings can be configured. Switch off timer You can turn off the unit automatically when there is no operation for specified time. In spite of this setting, the unit goes into standby mode automatically if there is no signal input and no user operation for 15 minutes. Press � repeatedly to change the amount of time (increases the time by 30 minutes up to 240 minutes). Each press of � will decrease the time by 30 minutes. To cancel the timer, press � repeatedly until “0” is displayed. USB Your TV is fitted with a USB connection that enables you to view photos, listen to music or watch video files stored on a USB memory stick. 1 Press ��SOURCE and use ��� to select USB, then press OK. 2 Use ������� to select the desired file, then press OK. USB DISK 2016_12_24 folder_A folder_B folder_C Photo Photo • These recorded files must meet specifications shown below: Picture (JPEG / Progressive JPEG) JPEG Upper limit 4000x4000 pixels Progressive JPEG Upper limit 1024x768 pixels Music (MP3 / WAV / AAC) MP3 Sampling frequency 16 kHz - 48 kHz Constant bit rate 8 kbps - 320 kbps WAV Sampling frequency 8 kHz - 48 kHz Constant bit rate 64 kbps - 1.5 Mbps AAC Sampling frequency 8 kHz - 48 kHz Constant bit rate - Video (MPEG / VOB / AVI / MP4) Maximum video H.264, H.265/HEVC: 3840x2160@30fps, MPEG: 1920x1080@60fps Extension .avi .mpg, .mpeg .ts, .trp, .tp .vob .mp4 .mkv Video codec Audio codec MPEG1, MPEG2, MPEG4, H.264 MPEG1, MPEG2, MPEG4 MPEG1, MPEG2, H.264, H.265/ HEVC MPEG1, MPEG2 MPEG1, MPEG2, MPEG4, H.264, H.265/ HEVC MPEG1, MPEG2, MPEG4, H.264, H.265/ HEVC Dolby Digital YES YES YES YES YES YES MPEG1/2 audio layer1/2/3 YES YES YES YES NO YES LPCM YES YES YES YES YES YES AAC-LC YES YES YES YES YES YES 27 .English Continued on next page.

bus power will not work. • Do not use an extension cord and/or USB hub to connect devices to this unit. Always directly insert the USB flash memory stick to this unit directly. • We cannot be held responsible if your USB memory stick is not supported, nor will we accept any liability for damage or loss of stored data. • The USB memory stick is not supplied with this TV. • A maximum of 1,023 folders or files can be recognized. • A file name exceeding 256 characters or contains a dot character is not supported on this TV. • A USB memory stick that required its own driver or the device with a special system such as fingerprint recognition are not supported. • Be sure to keep a backup copy of the original files on your USB device before you play them back on this unit. We have no responsibilities for damage or loss of your USB stored data. • To avoid damaging the USB memory stick and the unit always turn off the unit before you remove the USB memory stick. • This unit is not allowed to use the USB memory stick which requires external power supply (500 mA or more). • This unit does not support MTP (Media Transfer Protocol) or the file other than FAT16 and FAT32 file system. If the file is not supported, an error message appears. • When the unit does not recognize the USB memory stick, try reconnecting it. • Playing the files recorded with high bit rates, the images can be interrupted in some occasions. • This unit does not support external subtitles. • This unit cannot play back a file which goes over the limit of file restriction limit. Viewing photos 1 Use ��� to select Photo, then press OK. 2 Use ��� to select the desired item, then press OK. 3 Press OK or ��� to start a slide show of the files. • Press OK or ��� to pause the slide show. • The � icon appears. • Press �� or �� to move between images. • Press ��BACK or � to stop the slide show. • Press ��OPTIONS to display the optional menu, then use ��� to select the desired item. Voice guide toggle *1 Off Sets Voice guide to off. On Sets Voice guide to on. Repeat *2 Off Sets repeat playback to off. One Sets repeat playback for a selected image file. All Sets repeat playback for all image files in the current folder. Slide time *2 Short Switches to the next image in 5 seconds. Medium Switches to the next image in 10 seconds. Long Switches to the next image in 15 seconds. Transitions *2 None No effect when switching images. Dissolve Overlaps the next image on the current image. Wipe right Pushes the current image out from left. Wipe left Pushes the current image out from right. Wipe up Pushes the current image out from bottom. Wipe down Pushes the current image out from top. Box in The next image comes to the center from the outside. Box out The next image goes to the outside from the center. Auto picture *2 Selects the picture mode according to your preference. (Standard, Natural, Vivid, Sports, Movie, Game, Energy saving and Internet video) Rotate *3 0 Displays an image in its original direction. 90 Rotates an image 90 degrees clockwise. 180 Rotates an image 180 degrees clockwise. 270 Rotates an image 270 degrees clockwise. Zoom *3 1X Displays an image in its original size. 2X Magnifies a current image by 2 times. 4X Magnifies a current image by 4 times. *1 Voice guide toggle is available in slide show and pause mode. *2 You can set Repeat, Slide time, Transitions and Auto picture when images are in slide show. *3 You can set Rotate and Zoom when slide show is in pause mode. 28 .English Continued on next page.

2 Use ��� to select the desired item, then press OK. 3 Press OK or ��� to play the selected files. • Press OK or ��� to pause, then press OK or ��� again to resume. • Press �� to fast-forward search. • Press �� to fast-backward search. • Press � to stop playback. • Press ��OPTIONS to display the optional menu, then use ��� to select the desired item. Voice guide toggle * Off Sets Voice guide to off. On Sets Voice guide to on. Repeat Off Sets repeat playback to off. One Sets repeat playback for a selected music file. All Sets repeat playback for all music files in the current folder. Shuffle Off Sets shuffle playback to Off. On Sets shuffle playback for all music files in the current folder. TV Speakers Off The sound will not be output from the unit's speakers. On The sound will be output from the unit's speakers. Speakers EasyLink You can control audio output from your connected EasyLink compliant devices with VOL + / – by using this unit's remote control. Auto sound Selects the sound mode according to your preference. (Standard, Vivid, Sports, Movie, Music and News) * Voice guide toggle is available in slide show and pause mode. Playing movies 1 Use ��� to select Movie, then press OK. 2 Use ��� to select the desired item, then press OK. 3 Press OK or ��� to play the selected files. • Press OK or ��� to pause, then press OK or ��� again to resume. • Press �� to fast-forward search. • Press �� to fast-backward search. • Press � to stop playback. Press ��� to resume from the point at which playback was stopped. Press OK to play from the beginning of the file. • Press ��OPTIONS to display the optional menu, then use ��� to select the desired item. Voice guide toggle * Off Sets Voice guide to off. On Sets Voice guide to on. Repeat Off Sets repeat playback to off. One Sets repeat playback for a selected video file. All Sets repeat playback for all video files in the current folder. TV speakers Off The sound will not be output from the unit's speakers. On The sound will be output from the unit's speakers. Speakers EasyLink You can control audio output from your connected EasyLink compliant devices with VOL + / – by using this unit's remote control. Auto picture Selects the picture mode according to your preference. (Standard, Natural, Vivid, Sports, Movie, Game, Energy saving and Internet video) Auto sound Selects the sound mode according to your preference. (Standard, Vivid, Sports, Movie, Music and News) * Voice guide toggle is available in slide show and pause mode. Note(s) • The resume information will be kept even when the unit is Turned off. • If you play another file while the previously viewed file is being resumed, the resume information of the previously viewed file will be deleted. • The file or the folder in resume stop mode will be highlighted in gray on List or Thumbnails. 29 .English

TV This section explains functionality of the main TV menu. 1 Press MENU to display the main TV menu. 2 Use ������� to select the desired menu item, then press OK. Software settings Channel settings TV settings Update software Search for channels Picture and sound setup To quickly set basic picture and sound settings, press OK Note(s) • If you press MENU in Chromecast mode, only the TV settings menu is displayed. • To access main TV menu while in Chromecast mode, change the source to any other source other than Cast or USB and then press MENU. Picture and sound setup � p. 31 Guides you to get the best picture and sound settings. TV settings � p. 31 Accesses menus that allow you to change picture, sound and TV usage settings. Search for channels � p. 38 Guides you through channel installation. Channel settings � p. 39 Accesses menus that allow you to change channel settings. Update software � p. 41 Guides you through an update of the TV software. Software settings � p. 43 Accesses menus that allow you to change software settings. 30 .English Continued on next page.

Before you begin: You must set Home in Location. � p. 35 Otherwise, personalized picture and sound settings will not be memorized after the unit goes into standby mode. 1 Press MENU and use ������� to select Picture and sound setup, then press OK. 2 Follow steps 10 to 11 in TV initial setup � p. 21 TV settings Picture Before you begin: You must set Home in Location. � p. 35 Otherwise, personalized picture and sound settings will not be memorized after the unit goes into standby mode. 1 Press MENU and use ������� to select TV settings, then press OK. 2 Use ��� to select Picture, then press OK. Accessibility Mode selection Picture format Advanced settings Pixel Plus Ultra HD Sharpness Tint Color Brightness Contrast Backlight Auto picture Installation Features Sound Picture Vertical position Horizontal position Chromecast Built-in TV settings 3 Use ������� to select the item you want to adjust, then press OK. The following picture settings can be configured. Depending on the format of the picture source, some picture settings are not available. Auto picture To set your TV to a predefined picture setting. Personal The customized settings you defined using the Picture menu. Standard For normal TV viewing. Natural Ideal picture mode for viewing high quality content without any picture enhancements. Vivid Enhanced picture contrast and sharpness for viewing in a well-lit room. Sports Brilliant picture settings for high action. Movie Deep picture settings for a cinematic experience. Game Optimized for PCs and game consoles. Energy saving Eco TV settings for low power consumption. Internet video Optimized for low bit-rate internet video. When you adjust the following settings, Personal picture will be set automatically. Cursor � Cursor � Backlight To reduce power consumption and brightness To increase power consumption and brightness Contrast To decrease contrast To increase contrast Brightness To decrease brightness To increase brightness Color To decrease color intensity To increase color intensity Tint To add green To add red Sharpness To soften To sharpen Pixel Plus Ultra HD Enters sub-menus to adjust the following settings: (Dynamic contrast, Color enhancement, Black stretch, Perfect Motion Rate, 4K UHD Upscaling, Macro Dimming, Noise reduction and MPEG artifact reduction) Advanced settings Enters sub-menus to adjust the following settings: (Color alignment, Custom color management, HDR mode, Gamma, Blue stretch and Film mode) Picture format Automatic Changing Picture format � p. 25 Super zoom 4:3 Movie expand 14:9 Movie expand 16:9 Wide screen Full Unscaled Mode selection PC To turn off image enhancement features which makes the TV to act purely as a monitor HDTV To enable image enhancement features to improve picture quality Cursor � Cursor � Horizontal position To move PC screen left To move PC screen right Vertical position To move PC screen down To move PC screen up 31 .English Continued on next page.

Plus Ultra HD and Advanced settings sub menus. Color enhancement MPEG artifact reduction Dynamic contrast 4K UHD Upscaling Perfect Motion Rate Black stretch Noise reduction Mode selection Picture format Advanced settings Sharpness Tint Color Brightness Contrast Backlight Auto picture Pixel Plus Ultra HD Maximum Medium Minimum Off Macro Dimming Vertical position Horizontal position Dynamic contrast To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Color enhancement Off To set color enhancement to off On To make colors more vivid and bright Black stretch To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Perfect Motion Rate To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) 4K UHD Upscaling To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Macro Dimming To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Noise reduction To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) MPEG artifact reduction To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Blue offset Green offset Red offset Blue gain Green gain Red gain Mode Custom color management Gamma Film mode Color alignment Mode selection Picture format Advanced settings Sharpness Tint Color Brightness Contrast Backlight Auto picture Pixel Plus Ultra HD Blue stretch HDR mode Vertical position Horizontal position Color alignment Mode To set the color temperature to Personal, Cool, Normal and Warm. When you adjust the following settings, Personal will be set automatically. Cursor � Cursor � Red gain To decrease red contrast To increase red contrast Green gain To decrease green contrast To increase green contrast Blue gain To decrease blue contrast To increase blue contrast Red offset To decrease red brightness To increase red brightness Green offset To decrease green brightness To increase green brightness Blue offset To decrease blue brightness To increase blue brightness Custom color management To select the desired setting, then press OK (Red, Yellow, Green, Cyan, Blue and Magenta) Cursor � Cursor � Tint To rotate only selected color tint in clockwise direction To rotate only selected color tint in counterclockwise direction Saturation To decrease color with only selected color To increase color with only selected color Brightness To decrease brightness with only selected color To increase brightness with only selected color HDR mode Off To set HDR mode to off Auto Automatically switches to a dedicated picture quality setting when receiving HDR signal Gamma To select the desired setting, then press OK (Very Dark Room, Dark Room, Normal, Bright Room and Very Bright Room) Blue stretch To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Film mode Off To set film mode to off Auto To optimize the picture recorded by the original film Note(s) • Mode selection is available only if –The external input modes are selected HDMI 1, HDMI 2 or HDMI 3. –The connected HDMI device is outputting a video signal. 32 .English Continued on next page.

You must set Home in Location. � p. 35 Otherwise, personalized picture and sound settings will not be memorized after the unit goes into standby mode. 1 Press MENU and use ������� to select TV settings, then press OK. 2 Use ��� to select Sound, then press OK. Delta volume Digital output format Headphone volume TV speakers Auto volume leveling Sonic Emotion Premium Balance Equalizer Auto sound Installation Features Sound Picture Chromecast Built-in TV settings Accessibility 3 Use ������� to select the item you want to adjust, then press OK. The following sound settings can be configured. Depending on the format of the broadcasting, some sound settings are not available. Auto sound To set your TV to a predefined sound setting. When you adjust the following settings (Equalizer, Sonic Emotion Premium and Auto volume leveling), Personal sound will be set automatically. Personal The customized settings you defined using the Sound menu. Standard For normal TV viewing. Vivid Enhanced sound. Sports Clear sound for high action. Movie Powerful sound settings for a cinematic experience. Music Optimized for music playback. News Set the anchor's voice at a comfortable volume. Adjust the tonal quality for each frequency. Equalizer Cursor � Cursor � To adjust each level of tonal quality Press ��BACK to go back to the previous menu. Adjust the speakers to suit your listening preference. Balance Cursor � Cursor � To adjust the balance of the right and left speakers This selects sound modes for more spatial or surround sound reproduction. Sonic Emotion Premium Sonic Emotion Off To set Sonic Emotion to off On To set Sonic Emotion to on Dialog Enhancement Off To set Dialog Enhancement to off On To set Dialog Enhancement to on Bass Enhancement Off To set Bass Enhancement to off On To set Bass Enhancement to on Absolute 3D Sound Off To set Absolute 3D Sound to off On To set Absolute 3D Sound to on This function keeps a constant Loudness differential between the TV commercials and the programs. Auto volume leveling Off To remove the Auto volume leveling On To reduce volume differences between the TV commercials and the programs You can select the audio output from the unit’s speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit’s remote control. Make sure Master EasyLink is set to On. � p. 36 TV speakers Off No output sound from the unit’s speakers On To output sound from the unit’s speakers Speakers EasyLink To control audio output from your connected EasyLink compliant devices with VOL + / – by using this unit's remote control. Adjust headphone volume. Headphone volume Cursor � Cursor � To decrease or increase volume You can set the digital audio output format from SPDIF/ARC. Digital output format PCM To output PCM format Bitstream To output audio in its native format as Bitstream to connected audio receiver If a channel or input device is too loud or too soft, navigate to that channel or input device. Delta volume Cursor � Cursor � Provides the ability to set a custom volume level for the current channel or input source. If the source volume is too loud, set a negative value (-1 to -12) If the source volume is too soft, set a positive value (+1 to +12) 33 .English Continued on next page.

Displays Chromecast Built-in TV settings. If you set Wake on Cast (LAN) to On, you can turn your TV on when you use your Smartphone, Tablet or PC via your home network. 1 Press MENU and use ������� to select TV settings, then press OK. 2 Use ��� to select Chromecast Built-in TV settings, then press OK. Installation Features Sound Picture Wake on Cast (LAN) Chromecast Built-in TV settings Accessibility 3 Use ��� to select Wake on Cast (LAN), then press OK. 4 Use ��� to select On or Off, then press OK. Wake on Cast (LAN) Off To set Wake on Cast (LAN) to off On To set Wake on Cast (LAN) to on Features 1 Press MENU and use ������� to select TV settings, then press OK. 2 Use ��� to select Features, then press OK. Sleeptimer Installation Features Sound Picture Accessibility Chromecast Built-in TV settings Standby mode 3 Adjust the following items. Sleeptimer Sleep timer can set the unit to go into standby mode after an incremental period of time. 1 Use ��� to select Sleeptimer, then press OK. 2 Use � repeatedly to change the amount of time (increases the time by 5 minutes up to 180 minutes). • Each press of � will decrease the time by 5 minutes. • Press ��INFO once to call up the display for checking the remaining time. • To cancel the sleep timer, press ��� repeatedly until “0” is displayed. Standby mode To set preferred standby mode. 1 Use ��� to select Standby mode, then press OK. Sleeptimer ECO standby Active standby Standby mode ECO standby To set low energy consumption mode. Active standby Enables TV to turn on fast but consumes more energy during standby. 34 .English Continued on next page.

2 Use ��� to select Installation, then press OK. Installation Features Sound Picture Restore default settings Preferences Language Chromecast Built-in TV settings Accessibility 3 Adjust the following items. Language You can set the language for the on-screen display. 1 Use ��� to select Language, then press OK. Installation Features Sound Picture Accessibility Español Français English Restore default settings Preferences Language Chromecast Built-in TV settings 2 Use ��� to select English, Español or Français, then press OK. Note(s) • If you need the English menu instead of the Spanish or French menu’s, press MENU. Use ������� to select Ajustes de TV or Réglages de la télévision, then press OK. Use ��� to select Instalación or Installation, then press OK. Use ��� to select Idioma or Langue, then press OK. Use ��� to select English, then press OK. Press MENU to exit the Main menu. Preferences You can set the unit to reduce the power consumption or adjust the backlight brightness in Location setting. EasyLink allows you to operate your connected EasyLink device. Setting your location to home Choosing Home gives you full flexibility to change predefined settings for picture and sound. 1 Use ��� to select Preferences, then press OK. 2 Use ��� to select Location, then press OK. TV placement Location HDMI mode Home Retail Restore default settings Preferences Language EasyLink Retail Demo 3 Use ��� to select Home, then press OK. Retail The unit will be set up with predefined settings for retail displays. In this setting, you can set the backlight brighter. Home The unit is set to maximize the energy efficiency for home setting and it can be adjusted through a choice of picture and sound quality selections according to your preference. Note(s) • You must set Home in the menu. Otherwise, personalized picture and sound settings will not be memorized after the unit goes into standby mode. HDMI mode If there are issues with picture/color and/or sound when connecting an external device using the HDMI port, please try switching the HDMI mode following the instructions below. 1 Press � and use ��� to select Setup, then press OK. 2 Use ������� to select TV settings, then press OK. 3 Use ��� to select Installation, then press OK. 4 Use ��� to select Preferences, then press OK. 5 Use ��� to select HDMI mode, then press OK. 6 Use ��� to select HDMI1, HDMI2 or HDMI3, then press OK. 7 Use ��� to select Max 4K@60Hz + HDR, Max 4K@60Hz or Max 4K@30Hz (Compatibility) depending on the output capabilities of the external device, then press OK. • When switching the HDMI configuration, the screen will black out for a moment, then come back on. Note(s) • For HDMI 1 and HDMI3, Max 4K@30Hz (Compatibility) is the default setting, and for HDMI 2, Max 4K@60Hz + HDR is the default setting. • The HDMI connector with HDMI mode set to Max 4K@30Hz (Compatibility) supports up to UHD 30P, while The HDMI connector with HDMI mode set to Max 4K@60Hz supports up to UHD 60P. The HDMI connector with HDMI mode set to Max 4K@60Hz + HDR supports up to UHD 60P with HDR signal. • Switching the HDMI mode may cause loss of HDMI CEC functionality in certain cases. 35 .English Continued on next page.

1 Use ��� to select Preferences, then press OK. 2 Use ��� to select TV placement, then press OK. 3 Use ��� to select Wall mounted or On a TV stand, then press OK. Retail Demo When you set Location to Retail, E-sticker (Electronic Sticker) is displayed. E-sticker can be turned off using procedure below. 1 Use ��� to select Preferences, then press OK. 2 Use ��� to select Retail Demo, then press OK. 3 Use ��� to select Off, then press OK. Use Philips EasyLink Your TV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices. Compliant devices must be connected via an HDMI connector. One-touch play When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control. For example, when you press ��(Play) on your DVD remote control, your TV automatically switches to the correct channel to show the DVD content. One-touch standby When you connect your TV to devices that support standby, you can use your TV remote control to put your TV and all connected HDMI devices in standby mode. You can perform one-touch standby using the remote control from any of the connected HDMI devices. System audio control When you connect your TV to HDMI CEC compliant devices, your TV can switch automatically to play audio from the connected device. To use one-touch audio, you must map the audio input from the connected device to your TV. You can use the remote control from the connected device to adjust the volume. Remote control (RC) key forwarding RC key forwarding allows you to control EasyLink-compliant devices using your TV remote control. HDMI-ARC (Audio Return Channel) (HDMI 2 only) HDMI-ARC allows you to use Philips EasyLink to output TV audio directly to a connected audio device, without the need for an additional digital audio cable. Be sure that the device is HDMI CEC and ARC compliant, and that the TV is connected to the device using an HDMI cable attached to both HDMI-ARC connectors. Note(s) • Philips does not guarantee 100% interoperability with all HDMI CEC devices. • The EasyLink-compliant device must be switched on and selected as the source. EasyLink (HDMI CEC) This function allows you to operate the linked functions between our brand devices with a EasyLink feature and this unit connecting through an HDMI cable. You must connect this unit to our brand EasyLink devices and be sure its EasyLink (HDMI CEC) setting is also set to on. 1 Use ��� to select Preferences, then press OK. 2 Use ��� to select EasyLink, then press OK. 3 Use ������� to select the item you want to adjust, then press OK. On Off HDMI-ARC RC key forwarding Auto TV On Master EasyLink TV placement EasyLink Location HDMI mode Retail Demo Set the Master EasyLink to On or Off. The following additional settings will be grayed out when you set them to Off. Master EasyLink Off Disables all EasyLink. On Selects if you have connected an external device that is compatible with the EasyLink function. This unit will turn on when the power on signal is sent from your connected EasyLink device. Auto TV On Off This unit stays in Standby mode even if you turn on your connected EasyLink device. On This unit turns on automatically when you turn on your connected EasyLink device. You can operate some functions such as disc playback or call up the menu of the connected devices, by using this unit’s remote control. RC key forwarding Off Disable RC key forwarding. On PLAY, PAUSE���� / STOP�� / FWD�� / REV�� / VOL + / – / � (MUTE) / ��OPTIONS / ������� / OK / ��BACK / the NUMBER buttons can be used to control your connected EasyLink devices by this unit’s remote control. Note(s) • Pause may not work properly on some devices even if they are EasyLink (HDMI CEC) compliant. HDMI-ARC allows you to use Philips EasyLink to output TV audio directly to a connected audio device, without the need for an additional digital audio cable. HDMI-ARC (HDMI 2 only) Off Disable HDMI-ARC. On You can output TV audio through the HDMI cable solely, provided both the TV and device are HDMI-ARC compliant. 36 .English Continued on next page.

You can return settings to their default values. 1 Use ��� to select Restore default settings, then press OK. 2 Use ��� to select Reset AV settings or Reset all settings, then press OK. Reset AV settings Return picture and sound settings to their default values. The channel installation settings are not affected. Reset all settings Return all the settings to their default values. Accessibility 1 Press MENU and use ������� to select TV settings, then press OK. 2 Use ��� to select Accessibility, then press OK. Digital audio preferences Caption settings Installation Features Sound Picture Accessibility Voice guide Chromecast Built-in TV settings 3 Adjust the following items. Voice guide Lets you configure voice guide and its settings. 1 Use ��� to select Voice guide, then press OK. Voice guide toggle Off To set Voice guide off On To set Voice guide on Speed Fast Set voice guide speed based on your preference Normal Slow Pitch High Set voice guide pitch based on your preference Normal Low Verbosity Verbose Set voice guide explanation verbosity based on your preference Succinct Volume level Loud Set voice guide volume based on your preference Normal Soft Caption settings Closed captions displays the audio portion of the program as superimposed text over the video. 1 Use ��� to select Caption settings, then press OK. CC w/ mute On Off Digital caption options Digital caption service Caption service Closed captions Digital audio preferences Caption settings Voice guide Closed captions Off Closed caption is not displayed. On Closed caption is always displayed. CC w/ mute Closed caption is displayed when the sound is off. Digital TV operation In addition to the basic closed caption, DTV has its own closed caption called digital caption service. Use this menu to change the settings for digital caption service. Digital caption service CS-1 to CS-6 Select one of these before changing any other item in Caption settings menu. Choose CS-1 under normal conditions. You can choose the size, font, color, background and other characteristics of the caption text. Digital caption options Reset to default You can reset the status of digital caption options. You can change closed captioning font style, size, color and transparency. (Font style, Font size, Font color and Font opacity) You can change background color and transparency of the displayed caption. (Background color and Background opacity) You can change edge color and type of the displayed caption text. (Edge color and Edge type) So, you must be Philip. Hi! So, you must be Philip. Hi! I’m pleased to meet you. I’m pleased to meet you. So, you must be Philip. Hi! I’m pleased to meet you. (Background color and Background opacity) Background (Edge color and Edge type) Text edge (Font style, Font size, Font color and Font opacity) Text font Picture display • Review your setting choice made above by looking in the upper left corner of the displayed setting box (not all selections show the differences selected). 37 .English Continued on next page.

Caption service CC-1 and T-1 The primary closed captions and text services. The closed captions or text is displayed in the same language as the program’s dialog (up to 4 lines of script on the TV screen). CC-3 and T-3 Serve as the preferred data channels. The closed captions or text is often a secondary language. CC-2, CC-4, T-2 and T-4 Rarely available and broadcasters use them only in special conditions, such as when CC-1 and CC-3 or T-1 and T-3 are not available. • There are 3 display modes according to programs: Paint-on Displays characters on the TV screen immediately. Pop-on Once characters are stored in memory, they are displayed all at once. Roll-up Displays the characters continuously by scrolling (max. 4 lines). Note(s) • Digital caption service that you can switch differs depending on the broadcast description. • Closed captioning service may not be controlled by this unit’s menu options if you are watching television through an external cable or satellite set-top box. In which case you will need to use the menu options on the external set-top box to control closed captioning. • The captions do not always use correct spelling and grammar. • Not all TV programs and product commercials include closed caption information. Refer to your area TV program listings for the TV channels and times of closed caption shows. The captioned programs are usually noted in the TV listings with service marks such as CC. • Not all captioning services are used by a TV channel during the transmission of a closed caption program. • Closed caption will NOT be displayed when you are using an HDMI or a component connection. • To show the closed caption on your TV screen, broadcast signal must contain the closed caption data. • Not all TV programs and commercials have the closed caption or all types of the closed caption. • Caption's and text may not exactly match the TV voice. • Changing channels may delay the closed caption for a few seconds. • Adjusting or muting the volume may delay the closed caption for a few seconds. • Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a malfunction. • The caption or text characters will not be displayed while the Main menu or functions display is shown. • If a black box appears on the TV screen, this means that the closed caption is set to the text mode. To clear the box, select CC-1, CC-2, CC-3 or CC-4. • If the unit receives poor quality television signals, the captions may contain errors or there might be no captions at all. Some possible causes of poor quality signals are: –Automobile ignition noise –Electric motor noise –Weak signal reception –Multiplex signal reception (ghosts or screen flutter) –Data dropout and pixelation (for DTV only) • The unit retains the closed caption setting if the power fails. • When the unit receives special effects playback signal (e.g. search, slow and still) from a VCR’s video output channel (ch3 or ch4), the unit may not display the correct caption or text. • The EUT setting that satisfies § 79.102 (e) is as follows: –Font: Mono-font –Character size: Large Digital audio preferences You can set the interpretive broadcasting by an audio explanation. 1 Use ��� to select Digital audio preferences, then press OK. Primary audio selection criteria Audio language Audio accessibility Digital audio preferences Caption settings Voice guide Audio accessibility To prioritize VI-Visually Impaired streaming or HI- Hearing Impaired streaming: The setting for handicapped users (Main audio, Visually Impaired or Hearing Impaired). Audio language To set your preferred language in the audio streaming (English, Spanish or French). Primary audio selection criteria To set TV priority based on either of the above settings: (Audio accessibility or Audio language). Search for channels Be sure the RF cable is correctly connected to this unit and you are registered with your cable TV provider when you install cable channels. 1 Press MENU and use ������� to select Search for channels, then press OK. 2 Use ��� to select Start, then press OK. Install channels You can search and store all channels. If you move the unit to a different area after the initial setting, it is recommended to perform Autoprogramming. 4 Use ��� to select Antenna or Cable, then press OK. 5 Press OK on Start. • When the scanning and memorizing of available channels is completed, the lowest memorized channel will be displayed. 6 Follow the on-screen instructions to complete the installation. 0 0 12 34 Stop Total progress: Analog channels found: Digital channels found: complete. more than 20 minutes to Auto programming may take wait... System searching. Please 38 .English Continued on next page.

OK. 2 Adjust the following items. Uninstall channels Installation mode Mono/Stereo Digital audio language Change PIN Child lock Channel installation Channel installation Be sure the RF cable is correctly connected to this unit and you are registered with your cable TV provider when you install cable channels. Installation mode 1 Use ��� to select Channel installation, then press OK. 2 Use ��� to select Installation mode, then press OK. 3 Use ��� to select Antenna or Cable, then press OK. • When Antenna is selected, the TV detects antenna signals. It searches for DTV and analog TV channels available in your area. • When Cable is selected, the TV detects signals supplied by cable. It searches for DTV, analog TV and cable channels available in your area. Uninstall channels The channels selected here can be skipped when selecting the channels using CH + / –. Those channels can still be selected with the NUMBER buttons. 1 Use ��� to select Channel installation, then press OK. 2 Use ��� to select Uninstall channels, then press OK. 3 Use ��� to select the channel you want to remove, then press OK. • The removed channels are not displayed on the list of favorite channels. • To reactivate a removed channel, use ��� then press OK. Child lock You can prevent your children from watching certain programs or certain channels by locking the TV controls and by using ratings. 1 Use ��� to select Child lock, then press OK. Mono/Stereo Digital audio language Change PIN Child lock Channel installation Region ratings lock Canadian French rating Canadian English rating Movie ratings lock TV ratings lock 2 Use the NUMBER buttons to enter the 4-digit numbers for your PIN code. • When you have not set up your PIN code, enter 0, 0, 0, 0. • When the PIN code is correct, Child lock menu is displayed. See the following description for setting each item. TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y None All Region ratings lock Canadian French rating Canadian English rating Movie ratings lock TV ratings lock Mono/Stereo Digital audio language Change PIN Child lock Channel installation Note(s) • When you select the higher rating and set it to �, the lower ratings will be blocked automatically. • To remove all blocks place a check in the All box and then remove that check to remove all blocks. • Region ratings lock will be available when the unit receives a digital broadcast using the new rating system. • To block any inappropriate programs, set your limits in TV ratings lock, Movie ratings lock and Region ratings lock. • For the United States, the unit may download the region ratings lock table, if required. • The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy. Setting TV and movie ratings Movie ratings lock is the rating system created by MPAA. TV ratings lock has controlled access to individual programs based on their age ratings and content rating. 3 Use ��� to select TV ratings lock or Movie ratings lock, then press OK. 4 Use ��� to select the desired rating, then press OK repeatedly to switch between block and view. • � indicates that the rating is locked (Blocked). • � indicates that the sub rating is locked (Blocked). • � indicates that the rating is not locked (Viewable). 39 .English Continued on next page.

TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y None All Region ratings lock Canadian French rating Canadian English rating Movie ratings lock TV ratings lock Movie ratings lock Region ratings lock Canadian French rating Canadian English rating Movie ratings lock TV ratings lock X NC-17 R PG-13 PG G NR All US movie ratings US TV ratings Description All All ratings locked including no rating NR None No rating – TV-Y Appropriate for all children – TV-Y7 Appropriate for all children 7 and older G TV-G General audience PG TV-PG Parental guidance suggested PG-13 – Unsuitable for children under 13 – TV-14 Unsuitable for children under 14 R – Restricted under 17 requires accompanying parent or adult guardian NC-17 – No one under 17 admitted X TV-MA Mature audience only To set the sub ratings (displayed in the right column) For TV ratings lock, you can further set the sub ratings to block specific elements of programming. To set the sub ratings, follow the step below. Use ������� to select the desired rating, then press OK repeatedly to switch between � and �. TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y None All Region ratings lock Canadian French rating Canadian English rating Movie ratings lock TV ratings lock Fantasy Violence US TV ratings Sub rating TV-Y7 Fantasy Violence TV-PG Violence Sex Language Dialog TV-14 TV-MA Violence Sex Language Note(s) • Blocked sub rating's will appear beside the main rating category in TV ratings lock menu. • You cannot block a sub rating if the main rating is set to �. • Changing the category to � or � automatically changes all its sub ratings to the (� or �). Canadian English or Canadian French ratings You can select the rating for Canadian English or Canadian French broadcasting. 3 Use ��� to select Canadian English rating or Canadian French rating, then press OK. 4 Use ��� to select the desired rating, then press OK repeatedly to switch between block and view. • � indicates that the rating is locked (Blocked). • � indicates that the rating is not locked (Viewable). Canadian English rating Canadian French rating Description All Locked all ratings E Exempt program C – For all children C8+ – For all children 8 and older G General audience – 8 ans+ Unsuitable for ages under 8 PG – Parental guidance suggested – 13 ans+ Unsuitable for ages under 13 14+ – Unsuitable for ages under 14 – 16 ans+ Unsuitable for ages under 16 18+ 18 ans+ Adult audience only Note(s) • The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option to block NR, None or E programs are used in Movie ratings lock, TV ratings lock, Canadian English rating or Canadian French rating accordingly “unusual results may occur and the unit may not receive emergency bulletins or other types of programming”: / Emergency bulletins (Such as EAS messages, weather warnings and others) / Locally originated programming / News / Political / Public service announcements / Religious / Sports / Weather. 40 .English Continued on next page.

set your own PIN code. 1 Use ��� to select Change PIN, then press OK. 2 Press the NUMBER buttons to enter the current 4-digit PIN code. 3 Press the NUMBER buttons to enter the new 4-digit PIN code. • Enter PIN code again to confirm. Note(s) • Make sure new PIN code and confirm PIN code must be exactly the same. If they are different, the space is cleared for reentering. • If you have forgotten your PIN code, enter 07 1 1 to reset the PIN code. Digital audio language You can select the audio language while your TV is receiving the digital broadcasting. 1 Use ��� to select Digital audio language, then press OK. Digital audio language To select the language according to your preference. (It differs depending on the program.) Mono/Stereo Cable / NTSC (Analog) TV operation You can select an audio format while your TV is receiving the analog broadcasting. 1 Use ��� to select Mono/Stereo, then press OK. 2 Use ��� to select Mono, Stereo or SAP (Second Audio Program), then press OK. Update software Philips continuously tries to improve its products and we strongly recommend that you upgrade the TV software when upgrades are available. New software can be downloaded from our website at www.philips.com/support using the model number of your TV to find information. You can update the software through these methods: • Update with USB memory stick This section describes how to upgrade the software by using USB memory stick. Preparing for the software upgrade You require the following equipment: –A PC with web browsing capability –An archive utility that supports the ZIP-format (e.g. WinZip for Windows or StuffIt for Mac OS) –An empty clean formatted USB memory stick Note(s) • Only FAT / DOS-formatted portable memory is supported. • Use only software upgrades that can be found on the Philips web site. Warning • When the software upgrade is running, don’t press any buttons. • Do not remove the USB memory stick during the software upgrade. • If an error occurs during the upgrade, retry the procedure or for further assistance, please contact call center. Downloading the software Find information and software related to your TV and download the latest software upgrade file to your PC. Prepare a blank USB memory stick for software update. Access www.philips.com/support and download the latest version software to a blank USB memory stick using a PC by following the directions described on the website. • Use a blank USB memory stick, download the software on your PC and write the software in the root directory of the USB memory stick. • For more details on how to download the software, please refer to the website. 41 .English Continued on next page.

1 Connect your USB memory stick with the upgrade file to the USB terminal on the side of your TV. 2 Press MENU and use ������� to select Update software, then press OK. 3 Use ��� to select USB, then press OK. 4 Use ������� to select the desired update file, then press OK. 5 Use ��� to select Yes, then press OK. • Read the on-screen instructions and confirm that you want to continue with the installation. Do not remove the USB storage device or turn the TV off while upgrade is in progress. Software update is in progress. Please wait. 6 When the software upgrade is completed, press � to set the unit into standby mode, then remove the USB memory stick. 7 Unplug the AC power cord for a few seconds from AC outlet and plug it again. 8 Press � again to turn the unit on. • The TV starts up with the new software. • For further assistance, please contact call center. Network updates You can update the software by connecting the unit to the internet. 1 Press MENU and use ������� to select Update software, then press OK. 2 Use ��� to select Network, then press OK. 3 Use ��� to select Yes, then press OK. • This unit will then start checking for the latest FirmWare (software) version. 4 Confirmation message will appear. Use ��� to select Yes, then press OK. • The unit will start downloading the latest FirmWare (software) version. • The unit will start updating the FirmWare (software) version. • It may take a while to complete the updating. 5 When the software update is complete, press � to make sure the unit goes to standby mode. 6 Unplug the AC power cord for a few seconds from AC outlet and plug it again. 7 Press � again to turn the unit on. • The TV starts up with the new software. For further assistance, please contact call center. Note(s) • Please do not unplug the AC power cord or Ethernet cable while executing the Network updates. • All settings will remain the same even if you update the software version. • The version of net service will also be updated if newer version of net service is available when updating the firmware. • When you start up the TV or a net service after executing the software update, a message may appear on the screen prompting for software update again. In this case, please select Update to start USB update or network update. For further assistance, please contact call center. 42 .English Continued on next page.

OK. 2 Use ��� to select Software, then press OK. Checking your current software version number 1 Use ��� to select Software information, then press OK. • The version and a description of the current software is displayed. Checking your current Cast software version number 1 Use ��� to select Cast software version, then press OK. • The Cast software version is displayed. Netflix ESN Displays the ESN information. 1 Use ��� to select Netflix ESN, then press OK. • Displays the ESN (Electronic Serial Number) to get any services from Netflix. License Displays the licenses of open source software used in this unit. 1 Use ��� to select License, then press OK. • Licenses of open source software used in this unit are displayed. Digital rights management This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. 1 Use ��� to select Digital rights management, then press OK. • Digital rights management is displayed. 43 .English

FAQ Question Answer My remote control does not work. What should I do? • Check the antenna or cable connection to the main unit. • Check the batteries on the remote control. • Check if there is an obstacle between the infrared sensor window and the remote control. • Test the IR signal output use IR signal check. � p. 47 If okay, then possible infrared sensor trouble. • Aim the remote control directly at the infrared sensor window on the front of the unit. • Reduce the distance to the unit. • Re-insert or replace the AAA batteries with their polarities (+/–) as indicated on the remote control battery area. • When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal on this unit. Move the infrared-equipped device away from this unit, change the angle of the device's infrared sensor or turn off the infrared communication function. How come the initial setup appears every time I turn on this unit? • Make sure to complete the initial setup before the unit goes into standby mode. Why can I not watch some RF signal TV programs? • Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable channels are broadcast. • Make sure auto programming has been completed. � p. 38 • The selected channel may not be broadcasting. • When Auto programming is interrupted and not completed, some channels will not be received. Make sure to complete the Autoprogram. � p. 38 • The selected channel cannot be viewed by the Child lock setting. � p. 39 • The unit requires some kind of antenna input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital or VHF / UHF) or an RF coaxial cable from your wall cable or set-top box needs to be plugged into the unit. How come there is no image from the connected external devices? • Check if the correct input mode is selected by pressing ��SOURCE. � p. 24 • Check the antenna, cable or other input connection to the unit. • When using the component video connection check that the green (Y), blue (Pb/Cb) and red (Pr/Cr) connectors are connected to their corresponding colored jacks on the unit. When I enter a channel number, why does it change automatically? • Many digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying the broadcasting station's channel number. These basic numbers used for the previous analog broadcasts. (e.g., input digital ch# 30 automatically changes to digital ch# 8.1) Why are captions not displayed entirely? Or why are captions delayed behind the dialog? • Closed captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective editing is used to insure that the closed captions remain up-to date with the current TV screen dialog. How can I set the clock? • There is no clock function on this unit. My PIN code no longer works, how can I change the child lock setting? • Although the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN code in Child lock. � p. 39 When you forget your PIN code, enter 07 1 1 in Change PIN to reset the PIN code. � p. 41 When I start up the TV or a net service, a message appears on the screen prompting for software update again. • When you start up the TV or a net service after executing the software update, a message may appear on the screen prompting for software update again. In this case, please select Update to start USB update or network update. � p. 41 44 .English Continued on next page.

Please check the following Troubleshooting tips and all connections once before calling for service. Power No power • Make sure the AC power cord is plugged in. • Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet to ensure that the AC outlet operates normally. • If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself. Remote Control buttons do not work. • Do NOT press more than one button at the same time. • Ensure that no buttons on the remote control are depressed and move freely. Universal remote control does not work properly. • Refer to the User manual of the universal remote control for the Philips code. Picture Power is on but no screen image. • Check whether the connection for the antenna, cable or set-top box is connected correctly. • Check whether all the cables to the unit are connected to the correct output jack on your separate device like Blu-ray disc / DVD recorder. • Make sure that the selected input mode is connected to the working input jack. • Check if your computer is NOT in sleep mode when the input mode on this unit is in PC mode. Tap any key on the computer keyboard to wake it up. • Check if the correct input mode is selected by pressing ��SOURCE. No color • View other TV channels. The problem might be limited to the broadcasting station. • Adjust Color in Picture settings. � p. 31 Picture poor • Adjust Contrast and Brightness in Picture settings. � p. 31 • For the best picture quality, watch “High Definition” wide screen programs. If the HD content is not available, watch “Standard Definition” programs instead. You see pixelation on the screen. • When the capabilities of the unit exceed the capabilities of the digital broadcasting, the signal will be increased to match the capabilities of the display on the unit. This may cause pixelation, noise or trash. Unusual picture appears and the TV does not operate. • Press the power button first. If it does not solve, follow the procedure below. � Press the buttons on the remote control in the order shown below. ������������� � Unplug the AC power cord, then wait for 1 minute, and then plug it in again. Sound No sound is heard when using the HDMI digital connection. • Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications. No sound, distorted sound or incorrect audio sound is heard when using the HDMI-DVI connections. • Make sure that the analog audio signals from the HDMI-DVI device are connected to the analog audio input L/R jacks. • When using Component analog video or Composite analog video, make sure that the analog audio (L/R) connectors are mounted into the audio (L/R) input jacks. Sound intermittent or no sound. • Check if the audio cable is connected into the unit correctly. You switch to a different input and the volume changes. • This unit will memorize the volume level from the last time you adjusted it. • If the volume of the sound from another device is higher or lower, then the loudness will change. • Make sure Auto volume leveling is set to On. � p. 33 Picture & Sound No sound with distorted picture occurs when using the HDMI digital connection. • Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications. No picture or sound • Check if the power is on. • Check whether all the cables to the unit are connected to the correct output jack on your separate device like Blu-ray disc / DVD recorder. • View other TV channels. The problem might be limited to the broadcasting station or weak signal strength. • Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and turn on the unit again. • Check whether the connection of the antenna or cable / satellite set-top box is connected correctly. • Make sure that the selected input mode is connected to the working input jack. • Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode. Tap any key on the keyboard to wake up your computer. • Make sure that the sound is not muted. Press � so that the volume bar and current volume level will appear on the TV screen. • Make sure that the volume is NOT set to 0 or �. If so, use VOL + / – to adjust to the desired volume. • Make sure that the headphone is NOT connected to the headphone audio output jack. • Make sure that the TV speakers is NOT set to Off. • If there are issues with picture/color and/or sound when connecting an external device using the HDMI port, please try switching the HDMI mode. (Refer to HDMI mode � p. 35) Adjusted Picture or Sound settings are not effective every time the unit is turned on. • You must set Home in Location. � p. 35 (Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode.) You see a distorted picture or hear an unusual sound. (Analog TV - NTSC signal) • You may be getting NTSC (Analog) TV signal (not HDTV signal) interference from electrical appliances, automobiles, motorcycles or fluorescent lights. • Try moving the unit to another location to see if this is the cause of the problem. Ghosts, lines or streaks in picture. • Electrical interference from nearby appliances may affect picture quality. • View other TV channels. The problem might be limited to the broadcasting station or weak signal strength. Picture poor, sound intermittent or no sound • View other TV channels. The problem might be limited to the broadcasting station or weak signal strength. Child and rating lock Forgotten PIN code. • Enter “07 1 1” to clear your password. Screen You switch to a different input and the screen size changes. • This unit will memorize the viewing mode from the last time you used the particular input modes. The display image does not cover the entire screen. • If you are using the unit as a PC monitor, make sure that Horizontal position and Vertical position in Picture are set correctly. � p. 31 • If you are watching TV or using the Composite video, Component video or HDMI with 480i input, press ��FORMAT repeatedly to switch to various screen modes. Different color marks on the TV screen • View other TV channels. The problem might be limited to the broadcasting station, missing data or pixelation due to weak signal strength. 45 .English Continued on next page.

in the closed captions-supported program. • Interference from buildings or weather conditions may cause closed captions to be incomplete if watching analog TV signals. • Broadcasting station may shorten the program to insert advertisements. The closed caption decoder cannot read the information of the shortened program. Black box is displayed on the TV screen. • The text mode is selected for caption. Select CC-1, CC-2, CC-3 or CC-4. Software update A message appears on the screen prompting for software update again. • When you start up the TV or a net service after executing the software update, a message may appear on the screen prompting for software update again. In this case, please select Update to start USB update or network update. � p. 41 Network Cannot connect to the network. • Check if the Ethernet cable connection is properly made. Turn on the broadband router and/or modem. • Check the network settings. • Check if the broadband router and/or modem is correctly connected. Sometimes video quality is poor when using the wireless LAN. • The wireless network connection quality varies depending on the distance or obstacles (e.g. wall, basement, 2nd floor) between the TV wireless LAN adapter and the wireless router (access point), from other wireless networks, and brand and type of the wireless router (access point). When using the wireless LAN of the TV, it is suggested to place the wireless router as close as possible to the television. Wireless LAN connection fails or wireless connection is poor. • Check the installation location of the TV and wireless router (access point). Signal quality may be affected for the following reasons. – Interference of other wireless devices, microwaves, fluorescent lights, etc., are placed nearby. – There are floors or walls between the wireless router and TV. – If the problems continue even after checking the above, try making a wired LAN connection. Cannot use the wireless connection. • Check if the wireless LAN Access Point (AP) (e.g. wireless router) is oriented properly or not placed too close between them. • Once you have activated the wireless connection please wait 30 seconds for the connection to be established after turning on the unit, before trying to access network features such as Net TV. Note(s) • The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen. • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on correct operations. For additional troubleshooting, refer to the Frequently Asked Questions or FAQs on www.philips.com/support. 46 .English

Acronym that stands for National Television Systems Committee and the name of analog broadcasting standards. Off the air analog TV signals are no longer being sent by major broadcasting stations in the USA. ARC (Audio Return Channel) (HDMI 2 only) HDMI-ARC allows you to use Philips EasyLink to output TV audio directly to a connected audio device, without the need for an additional digital audio cable. Be sure that the device is HDMI CEC and ARC compliant, and that the TV is connected to the device using an HDMI cable attached to both HDMI- ARC connectors. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height). CEC (Consumer Electronics Control) This allows you to operate the linked functions between our brand devices with CEC feature and this unit. We do not guarantee 100% interoperability with other brands of CEC compliant devices. Component video This is a Video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr. Dolby Digital The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or multi-channel audio. DTV (ATSC) Abbreviation that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. E-sticker E-sticker is showing set features, technical information, etc on this TV set that is displayed on the TV screen mainly used by TV retailers. Previously the information was on a printed sticker that was put on the display. HDMI (High-Definition Multimedia Interface) Interface that supports all uncompressed, digital audio / video formats including set-top box, Blu-ray / DVD recorder or digital television, over a single cable. HDR HDR stands for High Dynamic Range. By using additional data encoded with the source signal, HDR capable products offer greater contrast through an expansion of the range of the image’s color luminance. The source, cable and display must all support HDR. HDTV (High-Definition TV) Ultimate digital format that produces high resolution and high picture quality. PIN code A stored 4-digit number that allows access to parental control features. SAP (Secondary Audio Program) Second-audio channel delivered separately from the Main-audio channel. This audio channel is used as an alternate in bilingual broadcasting. SDTV (Standard Definition TV) Standard digital format that is similar to the analog TV picture quality. Sonic Emotion Premium Sonic Emotion Premium fills your surroundings with the right ambience, clarifies voice, and details the sound stage, making your experience more immersive and enjoyable. Maintenance Cleaning • Clean the front panel and other exterior surfaces of the unit with a soft microfiber cloth or lens brush. Before cleaning the panel, disconnect the AC power cord. • Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces. • Do not spray any liquids on the screen or other exterior surfaces of this unit. If liquids enter the unit, they could cause shorts, electric shocks or fire damage. Servicing Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Call our toll free customer support line found on the cover of this User manual to locate an authorized service center. IR signal check If the remote control is not working properly, you can use a digital or cell phone camera to see if it is sending out an infrared signal. e.g.) With a digital camera: Point the digital camera towards the remote control infrared diode at the front of the remote control. Press and hold any key on the remote control and look at the camera display. If an infrared pulsating light appears on the display, the remote control is sending out an IR signal. Note: Some cameras may have an IR filter or dual camera cell phones may have an IR filter in one of the camera's and both will not display the IR signal. 47 .English

ATSC (digital) / NTSC (analog) Mono, Stereo, Sonic Emotion Premium 5 Band Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen Automatic / 4:3 / Wide screen / Full / Unscaled Full / Unscaled JPEG, Progressive JPEG MP3, WAV, AAC MPEG1, MPEG2, H.264, MPEG4, H.265/HEVC : VHF: 2∼13 : VHF: 2∼13 UHF: 14∼69 2∼13, A∼W W+1∼W+94 (Analog W+1∼W+84), A-5∼A-1, 5A 1 1 1 Supporting wireless standards : IEEE 802.1 1a/b/g/n/ac (2.4GHz/5GHz) 1 1 Supporting Dolby Audio (Dolby Digital and Dolby Digital Plus) 1 1/8 inch (3.5mm) 120V∼ +/- 10%, 60Hz +/- 0.5% 41 °F (5 °C) to 104 °F (40 °C) UHD (Ultra HD) (3840 x 2160 pixels 60Hz) Over-the-Air DTV (ATSC) Over-the-Air Analog (NTSC) 65”/ 16:9 65PFL5922 55PFL5922 50PFL5922 43PFL5922 54.6”/ 16:9 49.5”/ 16:9 43”/ 16:9 10W x 2 8W x 2 Model # Picture Type Diagonal screen size / Aspect ratio Viewing angles Built-in digital / analog tuner Sound Mono / Stereo Power output (RMS watts) Equalizer Ease of use Picture format HD UHD Photo slide show Music playback Video playback Channel Channel coverage CATV (Analog NTSC) Tuning system Channel access Connectivity Component video input (Y/Pb/Pr) Composite video input (Shared Y green terminal with component video) HDMI input Analog audio L/R input PC input USB Wireless LAN Ethernet port Digital audio output Headphone output Power Power requirements Temperature Operating temperature UHF: 14∼69 (Each channel may have e.g. 2.1∼2.9, 3.1∼3.9, etc) Channel frequency synthesized tuning system Supporting video signals : 480i/p, 720p, 1080i/p @60Hz Supporting HDMI video signals : 480i/p, 720p, 1080i @60Hz, 1080p, 2160p @24/30/60Hz Supporting PC-input video signal up to 4096 x 2160 1 (L audio / R audio) Via HDMI and HDMI-DVI + Analog audio L/R Supporting HDMI digital audio signals : LPCM, AC3, DD+ Direct access number keyboard, Programmable scan, Channel +(up) / -(down) and PREV. CH (Previous channel) SD (4:3 source) (16:9 source) 3 (selectable HDMI modes) • Specifications are subject to change without prior notice. 48 .English

Funai Service Corporation, 2425 Spiegel Drive, Groveport, OH 43125, USA Limited warranty one (1) year Warranty coverage : This warranty obligation is limited to the terms as set forth below. Who is covered: This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof. What is covered: This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period. At its option, the company will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory, or (3) refund the original purchase price of the product. Replacement products or parts provided under this warranty are covered against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product's warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes company property. When a refund is given, your product becomes company property. Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty. Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay. What is not covered - Exclusions and limitations: This Limited Warranty applies only to new company manufactured products that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty. This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-supplied product, (b) to damage caused by service performed by anyone other than company approved Authorized Service Location, (c) to a product or a part that has been modified without written company permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished product sold “AS IS” by some retailers. This Limited Warranty does not cover: • Shipping charges to return defective product. • Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product. • Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of the company. • Damage or claims for products not being available for use, or for lost data or lost software. • Damage from mishandled shipments or transit accidents when returning product. • A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. • A product used for commercial or institutional purposes (including but not limited to rental purposes). • Product lost in shipment and no signature verification receipt can be provided. • Failure to operate per user manual. To obtain assistance… Contact the Customer Care Center at: -866-202-5960 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. 49 .English

the complete corresponding source code for the copyrighted open source code packages, on an “AS IS” basis, used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after the product purchase to anyone in receipt of this information. To obtain source code, please contact Funai Corporation, Inc. You should write to Funai Service Corporation OSS Request, 2425 Spiegel Drive, Groveport, OH 43125, USA. Funai Corporation, Inc. disclaims any and all warranties and representations with respect to such software and related source code including quality, reliability, usability, and accuracy, and further disclaim all express, implied, statutory or otherwise, including without limitation, any implied warranties of title, non-infringement, merchantability, or fitness for a particular purpose. Funai Corporation, Inc. shall not be liable to make any corrections to the open source software or source code or to provide any support or assistance with respect to it. Funai Corporation, Inc. disclaims any and all liability arising out of or in connection with the use of this software and/or source code. 50 .English

under the responsibility of Funai Corporation, Inc., and Funai Corporation, Inc. is the warrantor in relation to this product. The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Funai Corporation, Inc. 12489 Lakeland Road, Santa Fe Springs, CA 90670, USA AA78ZUH-65UL / AA7RZUH-55UL / AA7UZUH-50UX / AA7VZUT-43UL ★★★★