Philips EP5930 Operation & User’s Manual

What to do if the descaling procedure is interrupted You can exit the descaling procedure by pressing the on/off button on the control panel. If the descaling procedure is interrupted before it is completely finished, do the following: 1 Empty and rinse the water tank thoroughly. 2 Fill the water tank with fresh water up to the CALC CLEAN level indication and switch the machine back on. The machine will heat up and perform an automatic rinsing cycle. 3 Before brewing any drinks, perform a manual rinsing cycle. To perform a manual ...

What to do if the descaling procedure is interrupted You can exit the descaling procedure by pressing the on/off button on the control panel. If the descaling procedure is interrupted before it is completely finished, do the following: 1 Empty and rinse the water tank thoroughly. 2 Fill the water tank with fresh water up to the CALC CLEAN level indication and switch the machine back on. The machine will heat up and perform an automatic rinsing cycle. 3 Before brewing any drinks, perform a manual rinsing cycle. To perform a manual ...

What to do if the descaling procedure is interrupted You can exit the descaling procedure by pressing the on/off button on the control panel. If the descaling procedure is interrupted before it is completely finished, do the following: 1 Empty and rinse the water tank thoroughly. 2 Fill the water tank with fresh water up to the CALC CLEAN level indication and switch the machine back on. The machine will heat up and perform an automatic rinsing cycle. 3 Before brewing any drinks, perform a manual rinsing cycle. To perform a manual ...

out or coffee comes out slowly. The AquaClean filter was not prepared properly for installation or it is clogged. Remove the AquaClean filter and try to brew a coffee again. If this works, make sure the AquaClean filter is prepared properly before you place it back (see 'Preparing the AquaClean filter for activation'). Place back the prepared filter. If this still does not work, the filter is clogged and needs to be replaced. The grinder is set to a too fine setting. Set the grinder to a coarser (higher) setting. The brew group is dirty. Clean the br ...

Brewing coffee with beans 1 Fill the water tank with tap water and fill the bean hopper with beans. 2 To brew a coffee, press one of the one-touch drink buttons. To select another drink, press the MENU button, select DRINKS, scroll down to the desired drink and press the OK button ( ). 3 To stop dispensing coffee, press the OK button ( ). Brewing milk-based drinks LatteGo consists of a milk container, a frame and a storage lid. To avoid leakage, make sure the frame and the milk container are properly assembled as described below before you fill the milk container. 1 Fill ...

6 Introduction __________________________________________________________________________________________ 7 First installation_______________________________________________________________________________________ 7 Using the control panel ______________________________________________________________________________ 7 AquaClean filter ______________________________________________________________________________________ 8 Measuring water hardness_____________________________ ...

6 Introduction __________________________________________________________________________________________ 7 First installation_______________________________________________________________________________________ 7 Using the control panel ______________________________________________________________________________ 7 AquaClean filter ______________________________________________________________________________________ 8 Measuring water hardness_____________________________ ...

out or coffee comes out slowly. The AquaClean filter was not prepared properly for installation or it is clogged. Remove the AquaClean filter and try to brew a coffee again. If this works, make sure the AquaClean filter is prepared properly before you place it back (see 'Preparing the AquaClean filter for activation'). Place back the prepared filter. If this still does not work, the filter is clogged and needs to be replaced. The grinder is set to a too fine setting. Set the grinder to a coarser (higher) setting. The brew group is dirty. Clean the br ...