Philips BDP2100/79 Operation & User’s Manual

Register your product and get support at BDP2100 Question? Contact Philips

instructions.

www.philips.com/welcome HDMI COAXIAL COAXIAL A ( ) HDMI 1

COAXIAL COAXIAAL A 2 COAXIAL HDMI  VIDEO COAXIAL  AUDIO LINE OUT

2 2 Use your Blu-ray disc/ DVD player 8 Basic play control 8 Video, audio and picture options 9 DivX videos 10 Play a musical slideshow 10 BonusView on Blu-ray 10 BD-Live on Blu-ray 11 Set up a network 11 Smartphone control 12 Browse PC through DLNA 12 Use Philips EasyLink 13 3 Change settings 13 Picture 13 Sound 14 Network (installation, status...) 14 Preference (languages, parental control...) 14 Advanced options (clear memory...) 15 4 Update software 15 Update software via the Internet 15 Update software via USB 15 5� Specifications� 16 6 Troubleshooting 17 7 Safety and important notice 19

control. Button Action Turn on the player, or switch to standby. Access the home menu. / Stop play. Press and hold (more than 4 seconds) to open or close the disc compartment. Pause play. Press repeatedly to slow forward frame by frame. Start or resume play. / Skip to the previous or next track, chapter or file. / Fast backward or forward. Press repeatedly to change the search speed. Press once, and then press to slow forward. AUDIO Select an audio language or channel. SUBTITLE Select a subtitle language. DISC MENU / POP-UP MENU Access or exit the disc menu. TOP MENU Access the main menu of a video disc. Color buttons Select tasks or options for Blu-ray discs. Navigate the menus. Press to rotate a picture clockwise or counter-clockwise during slideshow. OK Confirm a selection or entry. Return to a previous display menu. Access more options during play. Alphanumeric buttons Select an item to play. Enter values. Enter letters via SMS style entry. 2 Use your Blu-ray disc/ DVD player Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers (e.g. product software upgrade), register your product at www.philips.com/welcome. Basic play control

options More options are available for video or picture play from a disc or USB storage device. Video options Access more options during video play. • [Audio Language]: Select an audio language. • [Subtitle Language]: Select a subtitle language. • [Subtitle Shift]: Change the subtitle position on the screen. Press to change the subtitle position. • [Info]: Display play information. • [Character Set]: Select a character set that supports the DivX video subtitle (only for DivX videos). • [Time Search]: Skip to a specific time via the numeric buttons on the remote control. • [2nd Audio Language]: Select the second audio language (only for Blu-ray discs that support BonusView). • [2nd Subtitle Language]: Select the second subtitle language (only for Blu-ray discs that support BonusView). • [Titles]: Select a title. • [Chapters]: Select a chapter. • [Angle List]: Select a camera angle. • [Menus]: Display a disc menu. 1 2 3 • [PIP Selection]: Display a picture-in-picture window (only for Blu-ray discs that support BonusView). • [Zoom]: Zoom into a video picture. Press to select a zoom factor. • [Repeat]: Repeat a chapter or title. • [Repeat A-B]: Mark two points within a chapter for repeat play, or turn off repeat mode. • [Picture Settings]: Select a predefined color setting. Note • Available video options depend on the video source. Picture options Access more options during slideshow. • [Rotate +90]: Rotate a picture 90 degrees clockwise. • [Rotate -90]: Rotate a picture 90 degrees counter-clockwise. • [Zoom]: Zoom into a picture. Press to select a zoom factor. • [Info]: Display picture information. • [Duration per slide]: Set a display interval for a slideshow. • [Slide Animation]: Select a transition effect for a slideshow. • [Picture Settings]: Select a predefined color setting. • [Repeat]: Repeat a selected folder. 1 2 3

following options. • Repeat the current track. • Repeat all the tracks on the disc or folder. • Play audio tracks in a random loop. • Turn off a repeat mode. DivX videos You can play DivX videos from a disc or a USB storage device. VOD code for DivX • Before you purchase DivX videos and play them on this player, register this player on www.divx.com using the DivX VOD code. • Display the DivX VOD code: press , and select [Setup] > [Advanced] > [DivX® VOD Code]. DivX subtitles • Press SUBTITLE to select a language. • If the subtitle is not displayed correctly, change the character set that supports the DivX subtitle. Select a character set: press , and select [Character Set]. Character set Languages [Standard] English, Albanian, Danish, Dutch, Finnish, French, Gaelic, German, Italian, Kurdish (Latin), Norwegian, Portuguese, Spanish, Swedish, and Turkish [Central Europe] Albanian, Croat, Czech, Dutch, English, German, Hungarian, Irish, Polish, Romanian, Slovak, Slovene, and Serbian [Cyrillic] Bulgarian, Belorussian, English, Macedonian, Moldavian, Russian, Serbian, and Ukrainian [Greek] Greek [Baltic] Northern Europe Note • To play DivX DRM protected files from a USB storage device, connect this player to a TV through HDMI. • To use the subtitles, make sure that the subtitle file has the same name as the DivX video file name. For example, if the DivX video file is named “movie.avi", save the subtitle file as “movie.srt”, or “movie.sub”. • This player can play subtitle files in the following formats: .srt, .sub, .txt, .ssa, and .smi. Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow. 1 From a disc or connected USB storage device, play a music file. 2 Press , and go to the picture folder. 3 Select a picture from the same disc or USB, and press OK to start slideshow. 4 Press to stop slideshow. 5 Press again to stop music play. BonusView on Blu-ray View special content (such as commentaries) in a small screen window. This feature is only applicable to Blu-ray discs compatible with BonusView (also known as picture in picture). 1 During play, press . » The options menu is displayed. 2 Select [PIP Selection] > [PIP], and press OK. » PIP options [1]/[2] depend on the video contents. » The secondary video window is displayed.

Subtitle Language], and press OK. BD-Live on Blu-ray Access exclusive online services, such as movie trailers, games, ringtones and other bonus contents. This feature is only applicable to Blu-ray discs that are BD-Live enabled. 1 Prepare the Internet connection and set up a network (see "Set up a network"). 2 Connect a USB storage device to this player. • A USB storage device is used to store the downloaded BD-Live content. • To delete the BD-Live previously downloaded on the USB storage device for memory release, press and select [Setup] > [Advanced] > [Clear memory]. 3 Play a disc that is BD-Live enabled. 4 On the disc menu, select the BD-Live icon, and press OK. » BD-Live starts to load. The loading time depends on the disc and the Internet connection. 5 On the BD-Live interface, select an item to access. Note • BD-Live services vary from discs and countries. • When you use BD-Live, data on the disc and this player are accessed by the content provider • Use a USB storage device with at least 1GB of free space to store the download. Set up a network Connect this player to the Internet to access the services: • BD-Live: access online bonus features (applicable to Blu-ray discs that are BD- Live enabled) • Update software: update the software of this player via the Internet. • Browse PC (DLNA): play photos, music, and video files streamed from your computer. 1 Connect this player to the Internet through wired (Ethernet). • For wired connection, connect a network cable (not supplied) to the LAN port on the back panel of this player. 2 Perform the network installation. 1) Press . 2) Select [Setup], and press OK. 3) Select [Network] > [Network installation], and press OK. 4) Follow the instructions on the TV screen to complete the installation. If necessary, use the alphanumeric buttons on the remote control to enter a password. Caution • Before you connect to a network, familiarize yourself with the network router, and networking principles. If necessary, read documentation accompanying network components. Philips is not responsible for lost, damaged or corrupt data. PC (DLNA)

media files from this player. What you need • An iPhone (iOS 3.1.3 and above) or Android based device (Android 2.1 and above) • On your smartphone, download Philips MyRemote application • For iPhone, search for the application in App Store • For Android based device, search for the application in Android Market Before you start • Connect this player to a home network (see "Set up a network"). • Connect your smartphone to the same home network (see the user manual of the smartphone for details). • Turn on this player Control your player Use a smartphone to browse, control and play media files from this player. 1 Insert a data disc or USB storage device into this player. 2 On your smartphone, tap the MyRemote icon from the home screen. » The name of this player is displayed on the smartphone. 3 Select this player from the smartphone screen. » The smartphone used as a virtual remote control is enabled. 4 On the smartphone, tap the Media (Media) tab, and then select the disc or USB source. » The folders in the data disc or USB storage device are displayed. 5 Open a folder, and select a file to play. • To access the remote control, return to the previous smartphone screen, and then tap the Remote (Remote) tab. Only the relevant control buttons are enabled. 6 Tap the control buttons on the smartphone to control play. • To access more control buttons, swipe the screen to the left or right. • To exit the application, press the home button on the smartphone. Browse PC through DLNA Through this player, you can stream and play video, music and photo from a computer on your TV. Before you start • On your PC, install a DLNA-compliant media server application (such as Windows Media Player 11 or higher) • On your PC, enable media sharing and file sharing (see the "Help" document in the media server application) 1 Connect this player and your PC in the same home network (see "Set up a network"). • For better video quality, use wired network connection whenever possible. 2 Press . » The home menu is displayed on the TV screen. 3 Select [browse PC], and press OK. » A content browser is displayed. 4 Select a file, and press OK to play. • Use the remote control to control play.

This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices. 1 Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC operations on the TV and other connected devices (see the user manual of the TV or other devices for details). 2 Press . 3 Select [Setup]> [EasyLink]. 4 Select [On] under the options: [EasyLink], [One Touch Play] and [One Touch Standby]. » EasyLink function is turned on. One Touch Play When a video disc is in the disc compartment, press to wake up the TV from standby, and then play a disc. One Touch Standby When a connected device (for example TV) is put to standby with its own remote control, this player is put to standby automatically. 3 Change settings This section helps you to change the settings of this player. Note • You cannot change a menu option that is grayed out. • To return to the previous menu, press . To exit the menu, press . Picture 1 Press . 2 Select [Setup] > [Video] to access the video setup options. • [TV Display]: Select a picture display format to fit the TV screen. • [HDMI Video]: Select an HDMI video resolution. • [HDMI Deep Color]: Display colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature. • [Picture Settings]: Select a predefined color setting. 1 2 3

the new setting. • For settings related to HDMI, the TV must be connected through HDMI. • For the composite connection (via the VIDEO connector), select a video resolution of 480i/576i or 480p/576p under [HDMI Video] to enable video output. Sound 1 Press . 2 Select [Setup] > [Audio] to access the audio setup options. • [Night Mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech). • [HDMI Audio]: Set an HDMI audio format when this player is connected through HDMI. • [Digital Audio]: Select an audio format for the sound output when this player is connected through a digital connector (coaxial). • [PCM Downsampling]: Set the sampling rate for PCM audio output when this player is connected through a digital connector (coaxial). Note • For settings related to HDMI, the TV must be connected through HDMI. • Night mode is only available for Dolby encoded DVD and Blu-ray discs. Network (installation, status...) 1 Press . 2 Select [Setup] > [Network] to access the network setup options. • [Network installation]: Start a wired or wireless installation to make the network work. • [View network settings]: Display the current network status. • [View wireless settings]: Display the current Wi-Fi status. • [Name your Product:]: Re-name this player for identification in a home network. Preference (languages, parental control...) 1 Press . 2 Select [Setup] > [Preference] to access the preference setup options. • [Menu language]: Select an onscreen display menu language. • [Audio]: Select an audio language for video. • [Subtitle]: Select a subtitle language for video. • [Disc Menu]: Select a menu language for a video disc. • [Parental Control]: Restrict access to discs that are encoded with ratings. Input "0000" to access the restriction options. To play all discs irrespective of the rating, select level "8". • [Screen Saver]: Enable or disable screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). • [Auto Subtitle Shift]: Enable or disable subtitle shift. If enabled, the subtitle position is changed automatically to fit the TV screen (this feature works with some Philips TVs only). • [Change Password]: Set or change a password to play a restricted disc. Input "0000" if you do not have a password or if you have forgotten your password. • [Auto Standby]: Enable or disable auto standby. If enabled, the player switches to standby after 30 minutes of inactivity (for example, in pause or stop mode). • [VCD PBC]: Display or skip the content menu for VCD and SVCD.

language, audio or subtitle, you can select [Other] from the menu options and input 4-digit language code which can be found at the back of this user manual. • If you select a language which is not available on a disc, this player uses the default language of the disc. Advanced options (clear memory...) 1 Press . 2 Select [Setup] > [Advanced] to access the advanced setup options. • [BD-Live security]: Restrict or allow access to BD-Live (only for non-commercial, user- created BD-Live discs). • [Downmix mode]: Control 2-channel stereo audio output. • [Software update]: Select to update software from a network or from USB storage device. • [Clear memory]: Delete the previous BD- Live download on the USB storage device. A "BUDA" folder is automatically created to store the BD-Live download. • [DivX® VOD Code]: Display the DivX® registration code or the deregistration code for this player. • [Version information]: Display the software version of this player. • [Restore default settings]: Reset this player to the default settings made at the factory, except for password and parental control level. Note • You cannot restrict Internet access on commercial Blu-ray discs. • Before you purchase DivX videos and play them on this player, register this player on www.divx.com with the DivX VOD code. 4 Update software Before you update the software of this player, check the current software version: • Press , and then select [Setup] > [Advanced] > [Version Info.], and press OK. Update software via the Internet 1 Connect the player to the Internet (see "Set up a network"). 2 Press , and select [Setup]. 3 Select [Advanced] > [Software Update]> [Network]. » If an upgrade media is detected, you are prompted to start the update. 4 Follow the instructions on the TV screen to update the software. » When the update is complete, this player automatically turns off and on again. Update software via USB 1 Check the latest software version on www. philips.com/support. • Search for your model and click on "Software and drivers". 2 Download the software into a USB storage device. a Unzip the download, and make sure that the unzipped folder is named "UPG_ALL". b Put the "UPG_ALL" folder in the root directory. 3 Connect the USB storage device to the (USB) connector on this player.

5 Select [Advanced] > [Software Update]> [USB]. » If an upgrade media is detected, you are prompted to start the update. 6 Follow the instructions on the TV screen to update the software. » When the update is complete, this player automatically turns off and on again. Caution • Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player. 5 Specifications Note • Specifications are subject to change without notice Region code This player can play discs with the following region codes. DVD Blu-ray Countries Australia, New Zealand Playable media • BD-Video • DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer) • VCD/SVCD • Audio CD, CD-R/CD-RW, MP3 media, WMA media, JPEG files • DivX (Ultra)/DivX Plus HD media, MKV media • USB storage device File format • Video: .avi, .divx, .mp4, .mkv • Audio: .mp3, .wma, .wav • Picture: .jpg, .gif, .png Video • Signal system: PAL / NTSC • HDMI output: 480i/576i, 480p/576p, 720p, 1080i, 1080p, 1080p/24Hz Audio • Digital output: 0.5 Vp-p (75 ohm) • Coaxial • HDMI output • Sampling frequency: • MP3: 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.1 kHz, 48 kHz • Constant bit rate: • MP3: 112 kbps - 320 kpbs • WMA: 48 kpbs - 192 kpbs B

• Class support: USB Mass Storage Class • File system: FAT16, FAT32 • USB port: 5V , 500mA • Support HDD (a portable hard disc drive): an external power source may be needed. Main unit • Power supply rating: 220-240V~, 50Hz - 60Hz • Power consumption: 10 W • Power consumption in standby mode: < 0.5 W • Dimensions (w x h x d): 310 x 39.5 x 217.7 (mm) • Net Weight: 1.12 kg Accessories supplied • Remote control and 2x AAA batteries • HDMI cable • User manual Laser�Specification • Laser Type (Diode): AlGaInN (BD), AlGaInP (DVD/CD) • Wave length: 398nm to 413nm (BD),645nm to 664nm (DVD), 770nm to 800nm(CD) • Output power: 1.7mW (BD), 0.19mW(DVD), 0.25mW (CD) 6 Troubleshooting Note • For identification and supply ratings, see the type plate at the back or bottom of the product. • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. Warning • Risk of electric shock. Never remove the casing of the player. To keep the warranty valid, never try to repair the player yourself. If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www.philips.com/support. If you contact Philips, you will be asked for the model and serial number of this player. The model number and serial number are on the back of this player. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Main unit The buttons on this player do not work. • Disconnect this player from the power supply for a few minutes, and then reconnect. Picture No picture. • Make sure that the TV is switched to the correct source input for this player. • For the composite connection (via the VIDEO connector) to the TV, on this player select a video resolution of 480i/576i or 480p/576p under [HDMI Video] to enable video output.

• Make sure that the HDMI cable is not faulty. If it is faulty, replace with a new HDMI cable. • On the remote control, press and then press “731” (numeric buttons) to recover picture display. Or wait for 10 seconds for auto recovery. • If this player is connected to an unauthorized display device with an HDMI cable, the audio and video signals may not be output. The�disc�does�not�play�high-definition�video. • Make sure that the disc contains high- definition video. • Make sure that the TV supports high- definition video. Sound No audio output from the TV. • Make sure that the audio cables are connected to the audio input of the TV. • Make sure that the TV is switched to the correct source input for this player. No audio output from the loudspeakers of the external audio device (home theater or amplifier). • Make sure that the audio cables are connected to the audio input of the audio device. • Switch the external audio device to the correct audio source input. No sound on HDMI connection. • You may not hear any sound from the HDMI output if the connected device is non-HDCP compliant or only DVI- compatible. No secondary audio output for picture-in- picture feature. • When [Bitstream] under the [HDMI Audio] or [Digital Audio] menu is selected, interactive sound like secondary sound for picture-in-picture feature is muted. Deselect [Bitstream]. Play Cannot play a disc. • Clean the disc. • Make sure that the disc is correctly loaded. • Make sure that this player supports the disc. See "Specifications". • Make sure that this player supports the region code of the DVD or BD. • For DVD±RW or DVD±R, make sure that the disc is finalized. Cannot�play�DivX�video�files. • Make sure that the DivX video file is complete. • Make sure that the video file name extension is correct. • To play DivX DRM protected files from a USB storage device, connect this player to a TV through HDMI. DivX subtitles do not display correctly. • Make sure that the subtitle file has the same name as the DivX video file. • Make sure that the subtitle file has an extension name supported by this player (.srt, .sub, .txt, .ssa, or .smi). Cannot read the contents of a connected USB storage. • Make sure that the format of the USB storage device is compatible with this player. • Make sure that the file system on the USB storage device is supported by this player. • For a USB HDD (a portable hard disc drive), an external power source may be needed. 'No entry' or 'x' sign is displayed on the TV. • The operation is not possible. EasyLink feature does not work. • Make sure that this player is connected to the Philips brand EasyLink TV, and the EasyLink option is turned on (see "Use your Blu-ray disc/ DVD player" > "Use Philips EasyLink").

• Make sure that this player is connected to the network (see "Use your Blu-ray disc/ DVD player" > "Set up a network"). • Make sure that the network installation is made (see "Use your Blu-ray disc/ DVD player" > "Set up a network"). • Make sure that the Blu-ray disc supports BD-Live features. • Clear memory storage (see "Change settings" > "Advanced options (BD-Live security, clear memory...)"). Network Browse PC works slowly. • Look in your wireless router’s user manual for information on indoor range, transfer rate, and other factors of signal quality. • You need a high speed Internet connection for your router. 7 Safety and important notice Read and understand all instructions before you use this Blu-ray disc/ DVD player. If damage is caused by failure to follow the instructions, the warranty does not apply. Important notes for users in the U.K. Mains fuse This information applies only to products with a UK mains plug. This product is fitted with an approved molded plug. If you replace the fuse, use one with: • the ratings shown on the plug, • a BS 1362 approval, and • the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord. How to connect a plug The wires in the power cord are colored as follows: blue = neutral (N), brown = live (L). If the colors do not correspond with the colors on your plug, identify the terminals in your plug as follows: 1 Connect the blue wire to the terminal marked N or colored black. 2 Connect the brown wire to the terminal marked L or colored red. 3 Do not connect either wire to the earth terminal in the plug, marked E (or e) or colored green (or green and yellow). Before you replace the plug cover, make sure that the cord grip is clamped over the sheath

the cable. Copyright in the U.K. Recording and playback of material may require consent. see Copyright Act 1956 and The performer's Protection Acts 1958 to 1972. Safety Risk�of�electric�shock�or�fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use. • Never place the product and accessories near naked flames or other heat sources, including direct sunlight. • Never insert objects into the ventilation slots or other openings on the product. • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • Disconnect the product from the power outlet before lightning storms. • When you disconnect the power cord, always pull the plug, never the cable. Risk�of�short�circuit�or�fire! • Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different. Risk�of�injury�or�damage�to�the�product! • Visible and invisible laser radiation when open. Avoid exposure to beam. • Do not touch the disc optical lens inside the disc compartment. • Never place the product or any objects on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. Risk�of�overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Make sure that curtains or other objects never cover the ventilation slots on the product. Risk�of�contamination! • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries if they are exhausted or if the remote control is not to be used for a long time. • Batteries contain chemical substances, they should be disposed of properly. Risk�of�swallowing�batteries! • The product/remote control may contain a coin type battery, which can be swallowed. • Keep the battery out of reach of children at all times! Class II equipment symbol: This symbol indicates that this product has a double insulation system. CLASS 1 LASER PRODUCT

• Do not insert any objects other than discs into the disc compartment. • Do not insert warped or cracked discs into the disc compartment. • Remove discs from the disc compartment if you are not using the product for an extended period of time. • Only use microfiber cloth to clean the product. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health. Your product contains batteries, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Open source software Philips Electronics Singapore Pte Ltd hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain source code, please contact [email protected]. If you prefer not to use email or if you do not receive confirmation receipt within a week after mailing to this email address, please write to "Open Source Team, Philips Intellectual Property & Standards, P.O. Box 220, 5600 AE Eindhoven, The Netherlands." If you do not receive timely confirmation of your letter, please email to the email address above. This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited. Cinavia notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com.

by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA. Trademarks 'Blu-ray Disc ' and 'Blu-ray Disc ' logo are trademarks of Blu-ray Disc Association. HDMI, and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942;5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS 2.0+ Digital Out and the DTS logos are trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on- Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® and DivX Plus® HD (H.264/MKV) video up to 1080p HD including premium content. DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. BONUSVIEW™ 'BD LIVE ' and 'BONUSVIEW ' are trademarks of Blu-ray Disc Association. 'DVD Video' is a trademark of DVD Format/ Logo Licensing Corporation. Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.

Warranty against Defects In this warranty: We or us means Philips Electronics Australia Limited ACN 008 445 743 or Philips New Zealand Limited (Company Number 1723), and our contact details are set out at the end of this warranty; You means the purchaser or the original end-user of the Goods; Supplier means the authorised distributor or retailer of the Goods that sold you the Goods in Australia or New Zealand; and Goods means the product or equipment which was accompanied by this warranty and purchased in Australia or New Zealand. If you require assistance with the operation of the product, its features or specifications please call the Philips Consumer Care Centre on 1300 363 391 in Australia or 0800 658 224 in New Zealand. Australia: Our Goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This is not a complete statement of your legal rights as a consumer. New Zealand: Our Goods come with guarantees that cannot be excluded under the Consumer Guarantees Act 1993. This guarantee applies in addition to the conditions and guarantees implied by that legislation. Additional Warranty: In addition to the rights and remedies that you have under the Australian Consumer Law, Consumer Guarantees Act of New Zealand or any other applicable law, we provide the following warranty against defects: 1. If, during the first 12 months from their date of purchase from the Supplier (Warranty Period), the Goods prove defective by reason of improper workmanship or materials and none of your statutory rights or remedies apply, we will repair or replace the Goods without charge. 2. We do not have to repair or replace the Goods under this Additional Warranty if the Goods have been used for a commercial purpose; misused, improperly or inappropriately installed, operated or repaired; abused; damaged; or not maintained in accordance with the manufacturer’s instructions. 3. Even when we do not have to repair or replace the Goods, we may decide to do so anyway. In some cases, we may decide to substitute the Goods with a similar alternative product of our choosing. All such decisions are at our absolute discretion. 4. All such repaired, replaced or substituted Goods continue to receive the benefit of this Additional Warranty for the time remaining on the original Warranty Period. 5. This Additional Warranty is limited to repair, replacement or substitution only. As far as the law permits, we will not be liable for any loss or damage caused to property or persons arising from any cause whatsoever. 6. In order to claim under this Additional Warranty you must telephone us on 1300 363 391 in Australia or 0800 658 224 in New Zealand within the Warranty Period. You will be asked for details of the Goods, a description of the defect and your personal details. Upon accepting your claim, we shall assist you with either returning the Goods to the Supplier for replacement or to the most convenient Philips Authorised Service Centre for your Goods to be repaired. In some case we may require that you return to the Goods to us (at the address below) for repair, replacement or substitution. ∗ All returned Goods must be accompanied by satisfactory proof of purchase which clearly indicates the name and address of the Supplier, the date and place of purchase and identifies product. It is best to provide a legible and unmodified receipt or sales invoice. ∗ You must bear any expense for return of the Goods or otherwise associated with making your claim under this Additional Warranty. 7. This warranty is only valid and enforceable in Australia and New Zealand. Contact us or the place of purchase for further details. Philips Electronics Australia Limited Philips New Zealand Limited Level 1, 65 Epping Rd, Level 2, 1 Nugent St, North Ryde, SYDNEY NSW 2113 Grafton, AUCKLAND, 1023 Consumer Care: 1300 363 391 Consumer Care: 0800 658 224 E-mail: [email protected] Email: [email protected] Website: www.philips.com/support Website: www.philips.com/support

9072 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 6865 Deutsch 6869 Dzongkha 6890 English 6978 Esperanto 6979 Estonian 6984 Euskara 6985 6976 Faroese 7079 Français 7082 Frysk 7089 Fijian 7074 Gaelic; Scottish Gaelic 7168 Gallegan 7176 Georgian 7565 Gikuyu; Kikuyu 7573 Guarani 7178 Gujarati 7185 Hausa 7265 Herero 7290 Hindi 7273 Hiri Motu 7279 Hrwatski 6779 Ido 7379 Interlingua (International)7365 Interlingue 7365 Inuktitut 7385 Inupiaq 7375 Irish 7165 Íslenska 7383 Italiano 7384 Ivrit 7269 Japanese 7465 Javanese 7486 Kalaallisut 7576 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kernewek 7587 Khmer 7577 Kinyarwanda 8287 Kirghiz 7589 Komi 7586 Korean 7579 Kuanyama; Kwanyama 7574 Kurdish 7585 Lao 7679 Latina 7665 Latvian 7686 Letzeburgesch; 7666 Limburgan; Limburger 7673 Lingala 7678 Lithuanian 7684 Luxembourgish; 7666 Macedonian 7775 Malagasy 7771 Magyar 7285 Malayalam 7776 Maltese 7784 Manx 7186 Maori 7773 Marathi 7782 Marshallese 7772 Moldavian 7779 Mongolian 7778 Nauru 7865 Navaho; Navajo 7886 Ndebele, North 7868 Ndebele, South 7882 Ndonga 7871 Nederlands 7876 Nepali 7869 Norsk 7879 Northern Sami 8369 North Ndebele 7868 Norwegian Nynorsk; 7878 Occitan; Provencal 7967 Old Bulgarian; Old Slavonic 6785 Oriya 7982 Oromo 7977 Ossetian; Ossetic 7983 Pali 8073 Panjabi 8065 Persian 7065 Polski 8076 Português 8084 Pushto 8083 Russian 8285 Quechua 8185 Raeto-Romance 8277 Romanian 8279 Rundi 8278 Samoan 8377 Sango 8371 Sanskrit 8365 Sardinian 8367 Serbian 8382 Shona 8378 Shqip 8381 Sindhi 8368 Sinhalese 8373 Slovensky 8373 Slovenian 8376 Somali 8379 Sotho; Southern 8384 South Ndebele 7882 Sundanese 8385 Suomi 7073 Swahili 8387 Swati 8383 Svenska 8386 Tagalog 8476 Tahitian 8489 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga (Tonga Islands) 8479 Tsonga 8483 Tswana 8478 Türkçe 8482 Turkmen 8475 Twi 8487 Uighur 8571 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapuk 8679 Walloon 8765 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 8973 Yoruba 8979 Zulu 9085 Language Code

© 2013 Koninklijke Philips Electronics N.V. All rights reserved. BDP2100_79_UM_V1.0