Moza Mini-P Operation & User’s Manual

Download Moza Mini-P PDF Manual (12 pages)

Text of the manual

Battery and Charging

The MOZA Mini-P has a built-in lithium battery. Fully charge the battery before first use. The LED power indicator blinks when the battery level is less than 20%. Charge it with an universal USB-C cable, Mini-P can be charged through a phone charger and mobile power supplier. The charging stops automatically when the battery is fully charged. Notes: 1. Please do not over-charge or over-discharge the battery. Otherwise the battery will be damaged; 2. Recharge and discharge the battery every 3 months to keep it intact if it is left unused for a long time. EN.......................................................................................................1

Camera Control Port

Roll Storage Lock L-Bracket Quick Release Plate Pan Motor Lock Power Button USB-C Charging Port �� Trigger Pan Knob Roll Knob Slide Lock Joystick Dial Wheel Battery Level Indicator Tilt Knob Tilt Storage Lock L-Bracket Quick Release Plate Lock Knob

a. Folded Status

Slide the slide lock and rotate the gimbal 180° anticlockwise.Then it locks automatically. �� Slide the slide lock and rotate the gimbal 180° clockwise. Then it locks automatically. Mini-P Installation � �� protect from constant movement. a. Slide the tilt storage lock on the roll arm(Picture a), slide the tilt arm downwards(Picture b), place the L-Bracket lock knob into the tilt storage lock groove, then the tilt motor storage is complete. b. Slide the roll arm downwards, place the roll arm between the 2 bosses on the silicone sleeve of the pan motor (Picture b), then the roll motor storage is complete. c. Slide the pan motor lock upwards(Picture c) then the pan motor storage is complete. �� a. Screw the tripod tightly into the 1/4" hole at the bottom of the gimbal. �� 1 2 1 2

a. Place the longer side of the L-Bracket under the camera, and

secure the camera with a 1/4”screw. b. Loosen the L-Bracket quick release plate lock knob, slider the shorter side of the L-Bracket quick release plate into center of the quick-release base, then lock the knob. Vertical Mounting a. Place the longer side of the L-Bracket under the camera to secure it, and lock the camera with a 1/4”screw. b. Loosen the L-Bracket quick release plate lock knob, slider the longer side of the L-Bracket quick release plate into center of the quick-release base, then lock the knob. � �� release plate with 1/4”screw, make sure that front side with clips is backward; b. Put the phone in the phone holder, ensure that the clips do not touch the power key or volume key; c. Loosen the L-Bracket quick release plate lock knob, slider the shorter side of the L-Bracket quick release plate into center of the quick-release base, then lock the knob. Note: Please hold your phone or camera tight when loosen the L-Bracket quick release plate lock knob and remove the L-Bracket quick release plate to prevent the camera or mobile phone from falling to the ground. � � � � � � �

a. After the camera is installed, you can use the camera control

cable to connect the gimbal and the camera, and you can control the gimbal through the MOZA Master App. You will need to balance with the camera control cable attached. b. After the mobile phone is installed, use the MOZA Genie App, connect the gimbal, and you can take photos or videos through the gimbal. NOTE: For camera functions and features, please use Moza Master App. For Phone controls, please use Moza Genie App. �� the balance is not adjusted accurately, it will cause the abnormal motor work, motor overheat, unstable video, unavailable of certain functions, and also shorten battery life, please make sure it is completely balanced before turning on the gimbal. Balancing Connecting camera or mobile phone a. Loosen the tilt knob, and adjust the tilt arm back and forth until the lens is horizontally forward, then lock the knob. b. Rotate the camera until the lens is facing up, loosen the L-Bracket quick release plate lock knob, and adjust the L-Bracket quick release plate back and forth until the lens is straight up (leveled), then lock the knob. c. Loosen the roll knob, adjust the roll arm left and right until the roll arm remains horizontal, then lock the knob; The camera or phone should be leveled and can be positioned in any direction (up or down) and it stays there. d. Hold the stabilizer horizontally and make the pan arm parallel to the ground, then loosen the pan knob, adjust the pan arm left and right until the pan arm remains horizontal, and then lock the knob. Your camera or phone should be leveled and can be move to any direction (tilt, pan, roll) and stays on that position without hands holding it. � � � �

��Double press: Re-center

� Press once+hold: Switch to tilt follow �� Joystick �� The speed of camera moving increases with the larger moving range of joystick Check the Battery Level Battery Level Indicators �� Follow Function �� Press twice the left button: FPV mode. Press twice again to stop

a. Install the camera on the gimbal, then you can use the shutter

control cable to connect the gimbal and camera. Press the center button once to take a photo in photo mode. Press the center button once to start/stop recording in video mode. b. Install the phone on the gimbal, then turn on the MOZA Genie App and connect the gimbal to the MOZA Genie App. Press the center button once to take a photo in photo mode. Press the center button once to start/stop recording in video mode. c. Double press the top button to switch the video mode/photo mode � �� (requires 2 smartphones: one on gimbal and one to control the mimic. If plan to use the camera on gimbal, only one smartphone is required) Press the center button once: start/ stop recording (only valid in video mode) Press twice the center button during recording: take one photo (in video mode) Long press the center button:confirm to move timelapse point (in advanced timelapse mode) After the completion of timelapse points setting, long press the right button: start/stop advanced timelapse shooting (in advanced timelapse mode) Press twice the left button: FPV mode Press twice again to stop Double press the down button: Sport gear mode Press twice the top button: switch to video mode/photo mode Press the top button once: open the menu Long press the top button for 3s: switch to front camera/ rear camera Triple press the down button: Inception mode (±115°) Press the right button once: photo playback in album. Press once again to return to the camera Hold the down focus button: Focus- Double press the down focus button: Automatic uniform focus- Hold the top focus button: Focus+ Double press the top focus button: Automatic uniform focus+ Control via Mobile Phone (once paired through MOZA Genie App) Functions Description of the Gimbal

a. Place the smartphone on the Gimbal through the phone holder;

b. Use a 2nd smartphone and pen the “MOZA Master App, connect it to the gimbal and enter Mimic Motion Control Mode; c. Rotate the 2nd phone and it will control the movement of the gimbal. � �� Use the MOZA Master App or MOZA Genie App to connect the gimbal, select“Creative video”button and there will be multiple timelapse modes for shooting. � �� By default, we mount the camera handle near the tilt motor so that �� we need to mount the camera control port near the tilt motor for normal use. The following situations will require reverse mounting: a. The camera is too wide for forward mounting. b. The lens used is too heavy to be balanced when forward mounting. Reverse mounting steps： �� it on the bottom of the camera； �� be on the left of the roll motor. c. Mount the shorter side of the L-Bracket to the quick release baseplate. � �� Mount the phone on the gimbal, connect the Genie App to enter object tracking mode, select subject/object on the screen to be tracked and the gimbal will start object tracking shooting. � �� The Inception Mode is used to control the camera to rotate in the roll direction for shooting upside down and rotating footage. Triple press the down button on the dial to enter the Inception Mode. Press the left/right button on the dial then the motor rotates to the left/right automatically. �� Double press the left button on the dial to enter the FPV mode. � � �

a. When the gimbal is powered off, long press the center button,

Moza Mini-P Operation & User’s Manual

Text of the manual

Battery and Charging

Camera Control Port

a. Folded Status

a. Place the longer side of the L-Bracket under the camera, and

a. After the camera is installed, you can use the camera control

��Double press: Re-center

a. Install the camera on the gimbal, then you can use the shutter

a. Place the smartphone on the Gimbal through the phone holder;

a. When the gimbal is powered off, long press the center button,

Gimbal (folded): 165200100

The device has been evaluated to meet general RF exposure

Other Camera Accessories Manuals

Moza Mini-P Operation & User’s Manual

Text of the manual

Battery and Charging

Camera Control Port

a. Folded Status

a. Place the longer side of the L-Bracket under the camera, and

a. After the camera is installed, you can use the camera control

��Double press: Re-center

a. Install the camera on the gimbal, then you can use the shutter

a. Place the smartphone on the Gimbal through the phone holder;

a. When the gimbal is powered off, long press the center button,

Gimbal (folded): 165*200*100

The device has been evaluated to meet general RF exposure

Other Camera Accessories Manuals

Gimbal (folded): 165200100