REV.247 REV900 Assembly Manual

Outer pipe Connection pipe Cable clamp Rubber grip Rubber washer Hole cap Control Box / Hand control Hand control AC cable Motor extension cable Screws Screw for motor house / Outer pipe, M6x16mm Screw for feet, M10x16mm Screw for tabletop, Ø5x20mm PACKING LIST pcs 1 1 1 1 2 2 4 2 9 2 pcs 1 1 1 pcs 4 4 9 Maximum 6Nm Maximum 10Nm Maximum 10Nm < 6Nm Tightening torque Tailstock Screw for motor house and outer pipe Screw for feet and tabletop Screw for hand control Make sure all screws are tightened, also after a period of use! WARNING Carefully arrange all the cables not to be damaged by tabletop screws. Reset the desk before use Press both up and down buttons at the same time for 3 seconds. Continue pressing the buttons until both columns are in lowest position. When finish reset, the control box makes a sound and the buttons can be released. Now the system is operational. Step 1 Step 2 Step 4 Step 3 Step 5 REV900 - ASSEMBLY MANUAL 1 www.rev-247.com | 800.743.7738

Control box Screws Screw for motor house / Outer pipe, M6x16mm Screw for feet, M10x16mm Tailstock for connection pipe, M10x20mm Screw for tabletop, Ø5x20mm Screw for hand control, Ø4x22mm PACKING LIST pcs 2 2 2 4 2 8 4 16 4 pcs 1 pcs 8 8 8 14 2 Maximum 6Nm Maximum 10Nm Maximum 10Nm < 6Nm Tightening torque Tailstock Screw for motor house and outer pipe Screw for feet and tabletop Screw for hand control Make sure all screws are tightened, also after a period of use! WARNING Carefully arrange all the cables not to be damaged by tabletop screws. Reset the desk before use Press both up and down buttons at the same time for 3 seconds. Continue pressing the buttons until both columns are in lowest position. When finish reset, the control box makes a sound and the buttons can be released. Now the system is operational. Step 3 Step 4 Step 1 Step 2 2 www.rev-247.com | 800.743.7738