Weslo 895i Operation & User’s Manual

tions in this manual before using this equipment. Keep this manual for future reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee you complete satisfaction through direct assis- tance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUS- TOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance, free of charge to you. CUSTOMER HOT LINE: 1-800-999-3756 Mon.ÐFri., 6 a.m.Ð6 p.m. MST Model No. WLEX23280 Serial No. Write the serial number in the space above for future reference.

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 HOW TO USE THE PURSUIT 895i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate- rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All products for which war- ranty claim is made must be received by ICON at one of its authorized service centers with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase. All returns must be pre-autho- rized by ICON. This warranty does not extend to any product or damage to a product caused by or attribut- able to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center, products used for commercial or rental purposes, or products used as store display models. No other warranty beyond that specifically set forth above is authorized by ICON. ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential dam- ages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequen- tial damages. Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer- chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813 LIMITED WARRANTY WESLO is a registered trademark of ICON Health & Fitness, Inc.

using the exercise cycle. 1. Read all instructions in this manual before using the exercise cycle. Use the exercise cycle only as described. 2. It is the responsibility of the owner to ensure that all users of the exercise cycle are ade- quately informed of all precautions. 3. Use the exercise cycle indoors, away from moisture and dust. Place the exercise cycle on a level surface, with a mat beneath it to protect the floor or carpet from damage. 4. Inspect and tighten all parts regularly. Replace any worn parts immediately. 5. Keep children under the age of 12 and pets away from the exercise cycle at all times. 6. The exercise cycle should not be used by persons weighing more than 250 pounds. 7. Wear appropriate clothing when exercising; do not wear loose clothing that could become caught on the exercise cycle. Always wear athletic shoes for foot protection. 8. When adjusting the seat, insert the seat knob through one of the holes in the seat post (see the drawing on page 4). Do not insert the seat knob under the seat post. 9. Always keep your back straight when using the exercise cycle. Do not arch your back. 10. If you feel pain or dizziness at any time while exercising, stop immediately and begin cooling down. 11. The exercise cycle is intended for in-home use only. Do not use the exercise cycle in a commercial, rental, or institutional setting. WARNING: Before beginning this or any exercise program, consult your physician. This is espe- cially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property dam- age sustained by or through the use of this product. The decal shown at the right has been placed on the exer- cise cycle. If the decal is miss- ing, or if it is not legible, please call our Customer Service Department to order a free replacement decal. Apply the replacement decal in the loca- tion shown.

Thank you for selecting the new WESLO PURSUIT¨ 895i exercise cycle. The PURSUIT 895i blends advanced engineering with contemporary styling to provide you with a low-impact workout in the conve- nience and privacy of your own home. For your benefit, read this manual carefully before you use the PURSUIT 895i. If you have additional questions, please call our Customer Service Department at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please mention the product model number and serial number when call- ing. The model number is WLEX23280. The serial number can be found on a decal attached to the PURSUIT 895i (see the front cover of this manual for the location of the decal). Before reading further, please look at the drawing below and familiarize yourself with the parts that are labelled. Handlebars Resistance Knob FRONT BACK RIGHT SIDE Seat Knob Seat Book Rack Seat Post Pedal Console Water Bottle Holder (bottle is not included) Front Wheels

Use the chart below for help identifying the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part. The second number refers to the quantity used in assembly. Note: Some parts may have been pre- attached for shipping purposes. If a part is not found in the parts bag, check to see if it has been pre-attached. M8 Nylon Locknut (21)Ð8 M4 x 16mm Screw (4)Ð5 M8 Split Washer (53)Ð4 M10 Split Washer (31)Ð5 M8 x 90mm Carriage Bolt (9)Ð4 M10 x 25mm Button Screw (8)Ð5

(25) on the ends. Hold the Front Stabilizer (62) against the saddle on the front of the Frame (15). Attach the Front Stabilizer with two M8 x 90mm Carriage Bolts (9) and two M8 Nylon Locknuts (21). 2. Make sure that there is a Stabilizer Endcap (48) on each end of the Rear Stabilizer (61). Hold the Rear Stabilizer (61) against the saddle on the rear of the Frame (15). Make sure that the Rear Stabilizer is turned so the square holes are facing away from the saddle. Attach the Rear Stabilizer with two M8 x 90mm Carriage Bolts (9) and two M8 Nylon Locknuts (21). 3. The Console (7) requires two 1.5V batteries (not included). Alkaline batteries are recommended. Refer to the inset drawing. Locate the battery com- partment on the back of the Console. Press two bat- teries into the battery compartment. Make sure that the negative ends of the batteries (marked ÒÐÓ) are touching the springs in the battery compart- ment. Insert the console wire through the Handlebar Post (14). Connect the console wire to the Reed Switch Wire (54). Attach the Console (7) to the Handlebar Post with four M4 x 16mm Screws (4). Carefully slide the Handlebar Post (14) onto the Frame (15). Be careful to avoid pinching the wires inside the Handlebar Post. Attach the Handlebar Post with three M10 x 25mm Button Screws (8) and three M10 Split Washers (31). Attach the Knob Housing (12) to the Handlebar Post with an M4 x 16mm Screw (4). ASSEMBLY Place all parts of the PURSUIT 895i in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench , a phillips screwdriver and two adjustable wrenches . 3 2 1 62 25 25 15 9 9 21 21 21 15 14 8 4 54 7 8 8 31 31 61 48 48 15 4 12 Console Wire 7 Batteries Battery Cover

with two M10 x 25mm Button Screws (8) and two M10 Split Washers (31). 5. Press the Side Shield Cover (30) into the Right and Left Side Shields (1, 2). Make sure the four Tabs (A) on the Side Shield Cover are securely fastened to the Side Shields. Insert the Seat Post (20) into the Frame (15). Make sure that the Seat Post Bushing (23) is fully seated in the Frame. Align one of the holes in the Seat Post with the hole in the Frame. Insert the Seat Knob (29) into the Frame and the Seat Post, and tighten the Seat Knob into the Frame. Make sure to insert the Seat Knob through one of the holes in the Seat Post; do not insert the Seat Knob under the Seat Post. Attach the Seat (19) to the Seat Post (20) with four M8 Nylon Locknuts (21) and four M8 Split Washers (53). (Note: The Nylon Locknuts and Split Washers may be pre-attached to the bottom of the Seat.) 6. Identify the Left Pedal (28); there is an ÒLÓ on the Left Pedal for identification. Using an adjustable wrench, tighten the Left Pedal counterclockwise into the left arm of the Crank (17). Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank (17). 6 14 31 8 28 17 15 20 21 23 21 53 53 19 29 4 5 5 A 1 2 30

HOW TO ADJUST THE SEAT For effective exercise, the Seat (19) should be at the proper height. As you pedal, there should be a slight bend in your knees when the pedals are in the lowest position. To adjust the Seat, first hold the Seat and unscrew the Seat Knob (29). Align one of the holes in the Seat Post (20) with the hole in the Side Shield Cover (30). Insert the Seat Knob into the frame and the Seat Post, and tighten the Seat Knob into the frame. Caution: Make sure to insert the Seat Knob through one of the holes in the Seat Post; do not insert the Seat Knob under the Seat Post. HOW TO ADJUST THE PEDALLING RESISTANCE To vary the intensity of your exercise, the pedalling resis- tance can be adjusted. The resistance is controlled with the Resistance Knob (10). To increase the resistance, turn the Resistance Knob clockwise; to decrease the resistance, turn the Resistance Knob counterclockwise. BATTERY INSTALLATION Before the console can be operated, two ÒAAÓ batteries must be installed. If you have not installed batteries, see assembly step 3 on page 6. DIAGRAM OF THE CONSOLE The console is designed to help you get the most from your workouts. As you exercise, you can watch your progress around the LED ÒtrackÓ in the centre of the console. The upper LCD display will show how many calories you have burned, the number of laps you have completed, your current speed, the elapsed time, and the distance you have pedalled. The lower LCD display will show your heart rate when the pulse sensor is used. The modes of the two LCD displays are described below. CaloriesÑThis mode displays the approximate number of calories you have burned. LapsÑThis mode displays the total number of 1/4-mile laps you have completed. SpeedÑThis mode displays your pedalling speed, in miles per hour. TimeÑThis mode displays the length of time you have exercised. DistanceÑThis mode displays the total num- ber of miles you have pedalled during your workout. PulseÑThis mode displays your heart rate when the pulse sensor is used. 19 20 30 29 10 On/Reset Button Lower LCD Display Upper LCD Display LED Track

1. To turn on the power, press the on/reset button or simply begin pedalling. After two seconds, the console will be ready for operation. 2. When the power is turned on, the upper LCD display will begin displaying the Calories, Laps, Speed, Time, and Distance modes. Each mode will be displayed for five seconds in a repeating cycle. Flashing arrows in the display will show which mode is currently displayed. 3. The LED track represents a distance of 1/4 mile. As you exercise, the indicators around the track will light one at a time until you have completed 1/4 mile. A new lap will then begin. 4. To measure your pulse, stop ped- alling and place your thumb on the pulse sensor as shown. The pulse sensor is pres- sure-activatedÑ fully press down the pulse sensor. Do not press too hard, or the circulation in your thumb will be restricted, and your pulse will not be detect- ed. Next, slightly raise your thumb until the heart- shaped indicator in the lower LCD display flashes steadily. Hold your thumb at this level. After 5 to 10 seconds, three dashes will appear in the display and your pulse will be shown. Hold your thumb on the sensor for another 15 seconds for the most accurate reading. If the displayed pulse appears to be too high or too low, or if your pulse is not dis- played, lift your thumb off the sensor and allow the display to reset. Press down again on the sensor as described above. Make sure that your thumb is positioned as shown, and that you are applying the proper amount of pressure to the pulse sensor. Try the sensor several times until you become familiar with it. 5. To reset the upper LCD display, press the on/reset button. 6. To turn off the power, simply wait for about six minutes. Note: The console has an Òauto-offÓ feature. If the pedals are not moved and the console buttons are not pressed for six minutes, the power will turn off automatically in order to conserve the batteries. HOW TO SELECT KILOMETERS AND MILES The console can display distance and speed in either kilometers or miles. The letters ÒKPHÓ or ÒMPHÓ will appear in the SPEED display to show which unit of measurement is selected. To change the unit of measurement, first look under- neath the console and locate the square hole with the console wire coming out of it. Look inside the square hole and locate the small switch on the printed circuit board. Move the switch to the opposite side to change the unit of mea- surement. After changing the unit of measurement, remove one of the batteries from the console for about five seconds and then reinsert it. This will reset the console. + - SW2 Printed Circuit Board Switch Square Hole

exercise program. Remember that proper nutrition and adequate rest are essential for successful results. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. The chart below shows recom- mended heart rates for fat burning, maximum fat burning, and cardiovascular (aerobic) exercise. To find the proper heart rate for you, first find your age on the left side of the chart (ages are rounded off to the nearest ten years). Next, find the three numbers to the right of your age. The three numbers are your Òtraining zone.Ó The lowest number is the recommend- ed heart rate for fat burning; the middle number is the recommended heart rate for maximum fat burning; the highest number is the recommended heart rate for aerobic exercise. To measure your heart rate, first exercise for at least four minutes. Then, stop pedalling and measure your heart rate using the pulse sensor on the console. Burning Fat To burn fat effectively, you must exercise at a relative- ly low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses easily accessible carbohydrate calories for ener- gy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest num- ber in your training zone as you exercise. For maximum fat burning, adjust the intensity of your exercise until your heart rate is near the middle num- ber in your training zone as you exercise. Aerobic Exercise If your goal is to strengthen your cardiovascular sys- tem, your exercise must be Òaerobic.Ó Aerobic exer- cise is activity that requires large amounts of oxygen for prolonged periods of time. This increases the demand on the heart to pump blood to the muscles, and on the lungs to oxygenate the blood. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone. WORKOUT GUIDELINES Each workout should include the following three parts: A warm-up, consisting of 5 to 10 minutes of stretch- ing and light exercise. (See page 11.) A proper warm- up increases your body temperature, heart rate, and circulation in preparation for exercise. Training zone exercise, consisting of 20 to 30 min- utes of exercising with your heart rate in your training zone. (During the first few weeks of your exercise pro- gram, do not keep your heart rate in your training zone for longer than 20 minutes.) A cool-down, with 5 to 10 minutes of stretching. This will increase the flexibility of your muscles and will help to prevent post-exercise problems. WARNING: Before beginning this or any exer- cise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.

right. Move slowly as you stretchÑnever bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 2. Hamstring Stretch Sit with one leg extended. Bring the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg. Reach toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times for each leg. Stretches: Hamstrings, lower back and groin. 3. Calf/Achilles Stretch With one leg in front of the other, reach forward and place your hands against a wall. Keep your back leg straight and your back foot flat on the floor. Bend your front leg, lean for- ward and move your hips toward the wall. Hold for 15 counts, then relax. Repeat 3 times for each leg. To cause further stretching of the achilles tendons, bend your back leg as well. Stretches: Calves, achilles tendons and ankles. 4. Quadriceps Stretch With one hand against a wall for balance, reach back and grasp one foot with your other hand. Bring your heel as close to your buttocks as possible. Hold for 15 counts, then relax. Repeat 3 times for each leg. Stretches: Quadriceps and hip muscles. 5. Inner Thigh Stretch Sit with the soles of your feet together and your knees out- ward. Pull your feet toward your groin area as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip muscles. 1 2 3 4 5 EXERCISE FREQUENCY To maintain or improve your condition, plan three work- outs each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Caution: Be sure to progress at your own pace and avoid overdoing it. Incorrect or excessive training may result in injury to your health. Remember, the key to success is make exercise a regular and enjoyable part of your everyday life.

regularly. Replace any worn parts immediately. The exercise cycle can be cleaned with a soft, damp cloth. Avoid spilling liquid on the console. Keep the console out of direct sunlight or the display may be damaged. Remove the batteries when storing the exercise cycle. HOW TO TIGHTEN THE CRANK If the arms of the Crank (17) become loose, they should be tightened in order to prevent excessive wear. Loosen the Crank Nut (56) on the left arm of the Crank. Place the end of a standard screwdriver in one of the slots in the Slotted Crank Nut (58). Lightly tap the screwdriver with a hammer to turn the Slotted Crank Nut counter- clockwise until the arms are no longer loose. Do not overtighten the Slotted Crank Nut. When the Slotted Crank Nut is properly tightened, retighten the Crank Nut. BATTERY REPLACEMENT If the console does not function properly, the batteries should be replaced. To replace the batteries, see assembly step 3 on page 6. In addition, make sure that the console wire is connected to the reed switch wire. HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. In order to adjust the reed switch, the Left Side Shield (1) must be removed (refer to the drawing at the top of this page). Using an adjustable wrench, turn the Left Pedal (28) clockwise and remove it from the Crank (17). Remove the two M4 x 16mm Screws (4) from the Left Side Shield. Next, remove the Seat Knob (29) and lift the Side Shield Cover (30) off the Side Shields. Grasp both Side Shields at the top and gently pull them apart. Make sure that the arm of the Crank is in the position shown in the drawing above. Carefully slide the Left Side Shield forward off the arm of the Crank and remove it. Locate the Reed Switch (54). Turn the Crank (17) until the Magnet (55) is aligned with the Reed Switch. Loosen but do not remove the M4 x 12mm Washer Head Screw (45). Slide the Reed Switch slightly closer to or away from the Magnet. Retighten the Screw. Turn the Crank for a moment. Repeat until the con- sole displays correct feedback. When the Reed Switch is correctly adjusted, reattach the left side shield and pedal. MAINTENANCE AND TROUBLE-SHOOTING 56 58 17 28 17 30 29 1 4 54 17 45 55

If there is not enough pedalling resistance when the resistance knob is turned to the highest setting, the Resistance Strap (47) may need to be adjusted. To adjust the Resistance Strap, the left side shield must first be removed. Refer to the instructions at the left and remove the left side shield. Next, turn the resistance knob to the lowest set- ting. Locate and open the Strap Buckle (46). Grip the end of the Resistance Strap (47) and pull it up to remove any slack. While holding the end of the Resistance Strap, fully close the Strap Buckle. Turn the Crank (17) for a moment to make sure that there is not too much resistance. When the Resis- tance Strap is properly adjusted, reattach the left side shield and pedal. HOW TO ADJUST THE BELT The exercise cycle features a precision belt that must be kept properly adjusted. If the belt causes exces- sive noise or slips as you pedal, the belt should be checked. To do this, the left side shield must first be removed. Refer to the instructions on page 12 and remove the left side shield. Next, use an adjustable wrench to turn the right pedal counterclock- wise and remove it. Remove the right side shield. Press down on the centre of the Belt (16) between the front and rear sprockets. There should be from 1/4Ó to 3/4Ó of vertical movement in the centre of the Belt. If the Belt (16) is properly adjusted, reat- tach the side shields and ped- als. If the Belt needs to be adjusted, loosen the M10 Washer Nut (34) on each side of the Flywheel (39). To tighten the Belt, turn the two M6 Nuts (37) clockwise; to loosen the belt, turn the Nuts counterclockwise. Make sure that the Flywheel is straight and tighten the M10 Washer Nuts (34). Reattach the side shields and pedals. 13 46 17 47 16 16 39 34 37

R1098A 1 1 Left Side Shield 2 1 Right Side Shield 3 2 Double Tree Fastener 4 12 M4 x 16mm Screw 5 1 Handlebar 6 2 Foam Grip 7 1 Console 8 5 M10 x 25mm Button Screw 9 4 M8 x 90mm Carriage Bolt 10 1 Resistance Knob 11 1 Resistance Cable 12 1 Knob Housing 13 1 Right Pedal 14 1 Handlebar Post 15 1 Frame 16 1 Belt 17 1 Crank/Pulley 18 1 M4 x 16mm Flat Head Screw 19 1 Seat 20 1 Seat Post 21 8 M8 Nylon Locknut 22 1 25.4mm x 63.5mm Endcap 23 1 Seat Post Bushing 24 2 Wheel Hub 25 2 Wheel 26 2 Wheel Spacer 27 2 M6 x 16mm Self-tapping Screw 28 1 Left Pedal 29 1 Seat Knob 30 1 Side Shield Cover 31 5 M10 Split Washer 32 1 Small Spring 33 2 Handlebar Endcap 34 2 M8 Washer Nut 35 2 Adjustment Bolt 36 2 Adjustment Bracket 37 2 M6 Nut 38 1 Flywheel Axle 39 1 Flywheel 40 2 Bearing Cup 41 1 Crank Washer 42 1 Notched Crank Nut 43 2 Flywheel Bearing 44 1 M10 Washer 45 1 Read Switch Clip 46 1 Strap Buckle 47 1 Resistance Strap 48 2 Stabiliser Endcap 49 1 Large Spring 50 4 M4 Washer 51 1 M4 x 14mm Bolt 52 1 M4 Nut 53 4 M8 Split Washer 54 1 Reed Switch/Wire 55 1 Magnet 56 2 Crank Nut 57 1 Notched Crank Washer 58 1 Slotted Crank Nut 59 2 Bearing 60 1 Flywheel Spacer 61 1 Rear Stabiliser 62 1 Front Stabiliser 63 3 M4 x 38mm Sideshield Screw 64 1 Left Pedal Strap 65 1 Right Pedal Strap # 1 UserÕs Manual # 1 Console Decal Sheet # 1 Allen Wrench Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts. Key No. Qty. Description Key No. Qty. Description

41 28 17 56 57 58 59 40 13 17 9 54 4 21 21 21 47 51 32 50 50 49 52 34 36 37 35 60 43 39 43 44 9 61 48 48 37 36 35 34 38 62 31 31 31 31 30 54 18 46 4 33 63 63 64 65 45 EXPLODED DRAWINGÑModel No. WLEX23280 R1098A 15

Printed in USA © 1998 ICON Health & Fitness, Inc. ORDERING REPLACEMENT PARTS To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information: ¥ The MODEL NUMBER of the product (WLEX23280). ¥ The NAME of the product (WESLO PURSUIT¨ 895i). ¥ The SERIAL NUMBER of the product (see the front cover of this manual). ¥ The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 14 of this manual).