ViewSonic VS11287-1M Operation & User’s Manual

TV Setting The following menu appears only in the TV mode. 1. Channel No.: Shows the current channel number. 2. Tuning Mode: Select the mode of TV signal - Cable\HRC Cable\IRC Cable\ Broadcast. 3. System Standard: NTSC-M 4. Auto Search: Select "Auto Search" to search all signaled channel; when the search is complete, it stays at the first channel with signal and all ViewSonic 17 N2060w ...

1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. 2. Lightning For added protection for this pro ...

"Auto Search" during the process, press the function button. 5. Fine Tuning: NTSC-M is seldom used. 6. AFC can be set to ON or OFF. When it is set to ON, the TV will search the TV signal automatically; when there is any offset in the signal, it will automatically adjust the channel to the correct position. 7. Skip can be set to ON or OFF. When it is set to ON, a channel can be skipped by pressing the switching button on the remote control or on the front panel. 8. Reset To Default: Reset to the factory default value. ViewSon ...

Position, Video noise, Sharpness, Auto Adjust, Info, Color Temp.,（ Red, Green, Blue can be adjusted) and Reset to Default. Shown in the figure below: 1. Brightness and Contrast: Could adjust from 0 to 100. 2. Position: There are two options, Horizontal and Vertical, could adjust from -50 to +50. 3. Video noise: There are two options, Phase and Clock, could adjust from -50 to +50. 4. Sharpness: Select from five options of Softest, Soft, Auto, Sharp and Sharpest. You may adjust it if you like. 5. Auto Adj ...

Brightness, Contrast, Color, Sharpness, Hue, Dyn. Skin Tone, Color Temp., Zoom and Reset to Default respectively; shown in the figure below: 1. Brightness and Contrast: Could adjust from 0 to 100 to adjust the luminance of picture. 2. Color: Could adjust from 0 to 100 to adjust the color saturation of picture. 3. Sharpness: Five options: Softest, Soft, Auto, Sharp and Sharpest. You can adjust the sharpness of picture by any options above. 4. Hue: Could adjust from -50 to +50 to adjust the color of picture. 5. Dyn. Skin Tone: ...

1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. 2. Lightning For added protection for this pro ...