Viking VE-series Technical Practice

Viking products. The VE-Series backboxes are available in black fine texture powder painted steel or Marine Grade 316 stainless steel. The weather resistant boxes are designed to be surface mounted to a wall, post, sin- gle gang box, or a VE-GNP gooseneck pedestal. Note: The VE-3x5 is not compatible with the VE-GNP pedestals and is not available in stainless steel. The VE-3x5 is designed to be used with the E-40-EWP or E-50-EWP Series entry phones. The VE-5x5 is designed to be used with the E-10A-EWP, E-30-EWP, E-30-PT-EWP, E-60-EWP, E-65-EWP, E-70-EWP, E- 75-EWP entry phones, the E-1600-20A-EWP and E-1600- 30A-EWP emergency phones, as well as the W-1000-EWP and W-3000-EWP handsfree doorboxes. The VE-6x7 is designed to be used with the K-1700-3-EWP and K- 1705-EWP entry phones and the VE-5x10 is designed to be used with the K-1900-7-EWP and the K-1900-8-EWP vandal resistant phones. The VE-GNP gooseneck pedestals are designed to be used with the VE- 5x5, VE-6x7 and VE-5x10 backboxes and are ideal for drive up communications. Note: The VE-3x5 is not compatible with the VE-GNP pedestals. The VE-PNL’s are VE-Series backboxes with a blank aluminum panel. The user can customize the clear-coated aluminum panel to mount an HID-1 card reader, HID-2 keypad or switch. The kits come complete with box, gasket, panel and screws. Model numbers that end with “SS” are stainless steel version. Note: The use of magnets to mount the VE-Series enclosure to a metal surface can affect the operation of the enclosed product. PPrraaccttiiccee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY TECHNICAL TECHNICAL Surface or Pedestal Mount Viking Products While Maintaining Weather and Vandal Resistance VE-Series VE-Series Surface Mount Boxes and Pedestals June 1, 2012 AApppplliiccaattiioonnss • The VE-Series Surface Mount Boxes are designed to surface mount the following products: hhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoom m FFeeaattuurreess • Surface mounts to a wall, post or single gang box • VE-5x5 mounts to a single or double gang box • VE-5x5, VE-6x7 and VE-5x10 mount to the VE-GNP gooseneck pedestals • VE-PNL’s blank aluminum panels are easy to modify • Adds weather and vandal resistance • Heavy duty, black powder painted steel or stainless steel PPhhoonnee......771155..338866..88886611 Caution: Handsfree phones are not suit- able for noisy applications (see page 2). VE-3x5 VE-5x5 VE-6x7 VE-5x10 VE-5x5-PNL-SS VE-6x7-PNL-SS VE-5x10-PNL-SS VE-5x10-SS VE-5x5-SS VE-5x10-PNL VE-5x5-PNL VE-GNP-2 VE-GNP-IG VE-GNP-SS VE-GNP Model VE-3x5 VE-5x5 / SS / PNL VE-6x7 / SS / PNL VE-5x10 / SS / PNL VE-GNP VE-GNP-SS VE-GNP-2 VE-GNP-IG Shipping Weight (each) 0.45 kg (1 lb) 0.9 kg (2 lbs) 0.9 kg (2 lbs) 1.36 kg (3 lbs) 8.2 kg (18 lbs) 4.5 kg (10 lbs) 13.6 kg (30 lbs) 10.2 kg (22.5 lbs) Model DOD# VE Model E-10A-EWP 210 VE-5x5 / SS E-30-EWP 212 VE-5x5 / SS E-30-PT-EWP 214 VE-5x5 / SS E-35-EWP 178 VE-5x5 / SS E-40-EWP Series 187 VE-3x5 E-50-EWP Series 191 VE-3x5 E-60-EWP Series 206 VE-5x5 / SS E-65-EWP Series 203 VE-5x5 / SS E-70-EWP Series 207 VE-5x5 / SS E-75-EWP Series 208 VE-5x5 / SS E-1600-20A-EWP 215 VE-5x5 / SS E-1600-30A-EWP 215 VE-5x5 / SS K-1200-EWP 182 VE-5x10 / SS K-1205-EWP 183 VE-5x10 / SS K-1700-3-EWP 157 VE-6x7 / SS K-1705-3-EWP 159 VE-6x7 / SS K-1900-7-EWP 360 VE-5x10 / SS K-1900-8-EWP 362 VE-5x10 / SS W-1000-EWP 170 VE-5x5 / SS W-3000-EWP 180 VE-5x5 / SS W-3005-EWP 181 VE-5x5 / SS

IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666 Our Technical Support Department is available for assistance Monday 8am - 4pm and Tuesday to Friday 8am - 5pm central standard time. So that we can give you better serv- ice, before you call please: 1. Know the model number, the serial number and what software version you have (see serial label). 2. Have your Technical Practice in front of you. 3. It is best if you are on site. RETURNING PRODUCT FOR REPAIR The following procedure is for equipment that needs repair: 1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) number. The customer MUST have a complete descrip- tion of the problem, with all pertinent information regarding the defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc. 2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to: Viking Electronics, 1531 Industrial Street, Hudson, WI 54016 3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a P.O. Box. 4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned. RETURNING PRODUCT FOR EXCHANGE The following procedure is for equipment that has failed out-of-box (within 10 days of purchase): 1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The customer MUST be able to step through recom- mended tests for diagnosis. 2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14) calendar days from the date of issue. 3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your distributor will then replace the product over the counter at no charge. The distributor will then return the product to Viking using the same R.A. number. 4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge. Important: The Viking handsfree phones cannot be used in applications where there is a high level of background noise, such as a diesel truck idling. At these levels, the user will experience “one way talk path” and not be able to hear the per- son at the distant end. In applications where there is a high level of background noise, the model K-1900-7-EWP, K-1900- 8-EWP, W-3000-EWP (in push-to-talk mode) or E-30-PT-EWP are recommended. Front View of VE-3x5 1.8” 4.92” 3.17” 3.28” (4) 0.2 x 0.43 Slots for Single Gang Box 3.28” 1.64” 2.38” 0.45” (1) 0.38 Diameter Hole 1.8” 0.875 Diameter Knockout Bottom View of VE-3x5 Rear View of VE-3x5 Condensation Drain Hole A. VE-3x5 Surface Mount Box Material: 16 gauge CRS Finish: UV stable black fine texture powder paint Important: The VE-3x5 is not compatible with the VE-GNP pedestals. LIMITED WARRANTY Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manufactured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number. This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others. This warranty does not cover non-EWP products that have been exposed to wet or corrosive environments. NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCLUSION OF CONSEQUENTIAL DAMAGES. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER PARTY, FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE PRODUCT SOLD HEREUNDER. EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR ANY OTHER LEGAL THEO- RY, ANY LIABILITY OF VIKING SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT VIKING'S OPTION, REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED. IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER OF WARRANTIES, EXCLUSION OF CONSE- QUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM ANY OTHER PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE ENFORCED AS SUCH.

F. VE-5x10 / VE-5x10-SS Surface Mount Box Front View of VE-5x10 2.69” 10.14” 5.22” 3.69” Rear View of VE-5x5 3.0” 3.3” 3.0” (2) 0.2 x 0.43 slots for single gang box 4.50” (2) 0.75" Diameter Knockouts 9.50” Condensation Drain Hole (4) Clearance Holes for K-1900-8 panel (4) 0.38” diameter for wall or gooseneck mounting Front View of VE-5x5 2.4” 5.14” 5.22” 3.4” 3.63” 3.63” Rear View of VE-5x5 3.0” 3.3” 3.0” (2) 0.2 x 0.43 slots for single gang box (4) 0.2 x 0.43 slots for double gang box Condensation Drain Hole (2) 0.75" Diameter Knockouts (4) 0.38” diameter for wall or gooseneck mounting D. VE-6x7 / VE-6x7-SS Surface Mount Box Front View of VE-6x7 2.4” 5.64” 6.72” 3.4” 5.12” 4.04” Rear View of VE-6x7 3.0” 3.3” 3.0” (2) 0.2 x 0.43 slots for single gang box (4) 0.2 x 0.43 slots for double gang box Condensation Drain Hole (2) 0.75" Diameter Knockouts (4) 0.38” diameter for wall or gooseneck mounting C. VE-5x5-PNL/SS Panel 5.0” 3.625” 0.69” 3.625” 5.0” Front View of the VE-5x5-PNL Panel E. VE-6x7-PNL/SS Panel 5.5” 4.04” 0.69” 5.12” 6.5” Front View of the VE-6x7-PNL Panel 0.73” 10.0” 9.5” 0.25” 4.5” 5.0” Front View of the VE-5x5-PNL Panel G. VE-5x10-PNL/SS Panel Material: 16 gauge CRS Finish: UV stable black fine texture powder paint Material: 12 gauge aluminum Finish: UV stable clear gloss powder paint Material: 16 gauge CRS Finish: UV stable black fine texture powder paint Material: 12 gauge aluminum Finish: UV stable clear gloss powder paint Material: 16 gauge CRS Finish: UV stable black fine texture powder paint Material: 12 gauge aluminum Finish: UV stable clear gloss powder paint Material: 0.062 Marine Grade 316 stainless steel Finish: #4B brushed Material: 0.062 Marine Grade 316 stainless steel Finish: #4B brushed Material: 0.062 Marine Grade 316 stainless steel Finish: #4B brushed

Printed in the U.S.A. Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes. PPrroodduucctt SSuuppppoorrtt LLiinnee......771155..338866..88666666 FFaaxx BBaacckk LLiinnee......771155..338866..44334455 H. VE-GNP Gooseneck Pedestal 71.9 4.0 Sq. 11 gauge 11 gauge 13.00 1.69 Arrayed (8X) 3.38 2.00 2.00 0.285 Typ. 1.04 Typ. 0.285 Sq. (8X) 1.81 Dia. 2.38 3/16" Cover 14 gauge 41.1 0.75 Dia. Typ. 4 0.765 Dia. Typ. 8 1.81 Dia. 5.0 Centers Typ. 8.0 Sq. 0.75 Typ. 3.25 Typ. K. VE-GNP-2 Gooseneck Pedestal 41.0 4.0 Sq. 11 gauge 11 gauge 10 gauge 2.0 Sq. Tube Cover 14 gauge 13.0 0.765 Dia. Typ. 4 3.0 Centers Typ. 5.0 Sq. 1.81 Dia. 1.69 Arrayed (8X) 3.38 2.00 2.00 0.285 Typ. 1.04 Typ. 0.285 Sq. (8X) 1.81 Dia. 2.38 Description: 42” tall, pad mount, steel gooseneck pedestal. Universal car height for most applications. Material: CRS (see gauges below) Finish: UV stable black wrinkle powder paint Note: Adhere included gasket to back of VE-Series back- box then fasten backbox to pedestal. Description: 42”/72” tall, dual-height, pad mount, steel goose- neck pedestal. Ideal for both car and truck applications. Material: CRS (see gauges below) Finish: UV stable black wrinkle powder paint Note: Adhere included gasket to back of VE-Series backbox then fasten backbox to pedestal. 63.50 4.0 Sq. 11 gauge 11 gauge 2.0 Sq. Tube 13.00 1.69 Arrayed (8X) 3.38 2.00 2.00 0.285 Typ. 1.04 Typ. 0.285 Sq. (8X) 1.81 Dia. 2.38 I. VE-GNP-SS Gooseneck Pedestal 41.0 4.0 Sq. 12 gauge 15 gauge 10 gauge 2.0 Dia. Tube Cover 14 gauge 13.0 0.765 Dia. Typ. 4 3.0 Centers Typ. 5.0 Sq. 1.81 Dia. 1.69 Arrayed (8X) 3.38 2.00 2.00 0.285 Typ. 1.04 Typ. 0.285 Sq. (8X) 1.81 Dia. 2.38 Description: 42” tall, pad mount, stainless steel goose- neck pedestal. Universal car height for most applications. Material: 304 Stainless Steel (see gauges below) Finish: #4B Brushed Note: Adhere included gasket to back of VE-Series back- box then fasten backbox to pedestal. J. VE-GNP-IG Description: 64” tall, in-ground/wet cement mount, steel gooseneck pedestal. Insert bottom approximately 22” into ground/cement for 42” tall pedestal (universal car height for most applications). Material: CRS (11 gauge) Finish: UV stable black wrinkle powder paint Note: Adhere included gasket to back of VE-Series back- box then fasten backbox to pedestal.