Viper 5704V Owner's Manual

Congratulations on the purchase of your state-of-the-art security and re- mote start system. Reading this Owner's Guide prior to using your sys- tem will help maximize the use of your system and its many features. Please visit: www.viper.com- For general and additional guide infor- mation. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600 (U.S. only). Additional support is also available at: http:/ /support.directed.com. Mdili on a I G uide_Jnfor m ati on ----.. -----··----.. · .. -------·----··-·----.. -----~-----· Only basic commands, features and essential information are covered in this compact guide. Your product has many advanced features which are not discussed here, please consult the expanded online version for these at: www.viper.com. Most sections in this guide also contain additional information which can be found in the expanded online version. What you get Welcome to the best generation of security with remote start. Your system contains everything you need. • Responder LC remote control with SST technology for superior range and reliability (p/n 7752V) • 1-way Companion remote control (p/n 7654V) • AC adapter for charging your remote control (p/ n 8602T) • Documentation: Owner's guide and Warranty card

receive the warranty registration cord and proof of purchase from your dealer indicating the product was installed by on authorized Directed dealer. Please validate it online at www.prodregister.com/ directed or complete and return the warranty registration cord. Getting Started Due to transit and storage time prior to your purchase, the battery charge may hove depleted. To ensure proper operation, check the battery level and connect the battery charger if not fully charged. The displayed battery level icon indicates when the battery is fully charged.

Status Screen Icons .............................................................................................. 4 Using your System ............................................................................................... 7 Commands and Confirmations .............................................................. 7 Performing Commands ......................................................................... 7 Responder LC Command table .............................................................. 8 Fault Condition Alerts ........................................................................... 8 Basic Commands (Direct Access) .......................................................................... 9 Arm ................................................................................................... 9 Disarm ............................................................................................... 9 AUX/Trunk ........................................................................................ 1 0 Remote Start ...................................................................................... 1 0 Responder LC Configuration ............................................................................... 11 Navigating menus and options ............................................................ 11 Button operation ................................................................................ 11 Access menu items ............................................................................ 11 1-way Companion Remote Control ..................................................................... 12 Battery Information (Responder LC) ..................................................................... 13 Battery Information ( 1-Way) ................................................................ 13 Battery Disposal ................................................................................ 1 3 Government Regulations .................................................................................... 14 Warning! Safety First ......................................................................................... 16 Installation ........................................................................................ 16 Remote Start Capable ........................................................................ 16 Manual Transmission Vehicles ............................................................. 16 Interference ....................................................................................... 18 Upgrades and Batteries ...................................................................... 18 Water /Heat Resistance ...................................................................... 18 Limited lifetime consumer warranty ..................................................................... 19

Internal Antenna Function Button Used for transmitting and receivin information Status screen -the upper portion of the display contains status icons for the System, Siren, Alarm zones, Remote Start and Remote Control. Text field - the lower portion of display - shows the Clock, Runtime or Temperature during Remote Start, as well as Command confirmations, Page messages and programming Used to perform arming, disarming, auxiliary channel and remote start commands Used to access function levels for commands, configura- tion menus for programming, Car Selection, and to request rt. © 2012 Directed. All rights reserved.

The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: • The In-vehicle system antenna, for 2 way communication. • The Status LED, as a visual indicator of the system's status. • The Control button, for placing the system into Valet Mode* and to perform the Emergency Override** operation. * See "Remote and System Operations" in online guide. * * See "Alarm Features" in online guide. © 2012 Directed. All rights reserved. 3

Status Screen Icons ~$X • • • ~ t ALL ~1 :(( li fwl lwlsiwl lwl IWI IWt @ll!ff•IMf@) @I w-+--- Text Field The table below describes all the status screen icons. {';:-~l. ' ' ' ' ' ' ' I en d :::) -R en c:: (I) d +ALL '- V5 .. } : . •, (~} Armed: The system is Armed, the alarm is enabled. Locked: The system is Locked in Valet, the alarm is disabled. Disarmed: The system is Disarmed, the alarm is disabled. Unlocked: The system is Unlocked in Valet, the alarm is dis- abled. Siren is disabled for sensor triggers; remote is paged for all trig- gers (Sensor Silent Arm). Siren is disabled for all triggers; remote is paged for all triggers (Full Silent Arm). Remote start is active, the engine is running . Timer Start is On; Remote Start is On. Note: When the icon is without an arrow head: Timer Start is enabled: Remote Start is Off © 2012 Directed. All rights reserved.

Note: When the icon is without an arrow head : Smart Start is On; Remote Start is Off. Manual Transmission Start mode is enabled, the engine can be started Displays the vehicle interior temperature On during Remote Start after performing the Defogger On command On during Warn-away and Full Trigger message output On during Trunk Zone Full Trigger output and Aux/Trunk channel activation On during Fault Report to indicate the Trunk is open and bypassed when arming On during a Sensor Zone Full Trigger output On during Fault Report to indicate a Sensor is active and bypassed when arming On during the Door Zone Full Trigger output On during Fault Report to indicate a Door is open and bypassed when arming On during a Hood Zone Full Trigger output On during Fault Report to indicate the Hood is open and bypassed when arming On when remote is set to command the system programmed as Car 1 * On when remote is set to command the system programmed asCar2* © 2012 Directed. All rights reserved. 5

On while the remote control is transmitting a command On while the remote control is receiving a message On with Out of Range fault tone to indicate the remote failed to receive a command confirmation Pager on : The remote will wake up to listen for messages Pager off: The remote will not wake up to listen for messages The remote will Vibrate when messages are received The remote will emit Beeps and Tones when messages are received Displays the Clock, Runtime, Temperature, message text and feature menus On after the Garage Open** message has been received . On after the Garage Closed** message has been received. * This icon not present until the Car 2 is turned on in the Setup Re- mote configuration menu. * * This icon not present until the remote 1s paired with an optional go rage door opener. © 2012 Directed. All rights reserved.

Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used security and remote start fea- tures while Advanced commands control more specialized features and request reports. Confirmations for Basic or Advanced commands are indicated first by siren chirps and parking light flashes, and then by Text, Icons and beeps or tones on the remote control. A description of each fea- ture confirmation is found in the Basic Commands section. See online guide for Advanced Commands section. Performing Commands Perform Basic commands by pressing one of the command buttons while in the Direct Access level. Direct access is available while the text field displays the Clock, Temperature or Runtime. Perform Ad- vanced commands by first accessing one of the Function Levels and then pressing one of the command buttons while within a level. Func- tion Levels are available when the text field displays LEVEL 1,2,3 or 4. Advanced command example: Silent Arm l . Press the f button once to access Function Level l, the text field will display 'i;lltllgi1JH . 2. Press the tj button while '18111~%11& text is still on to perform the Silent Arm command. 3. The Responder LC remote will display 'ff~Yitfllli:-}im? in the text field and update the status screen icons. © 2012 Directed. All rights reserved. 7

Direct Access Change Car ( 3s), Enter programming (8s) Fault Condition Alerts lxl lx2 Timer Start Remaining lx3 LEVEL 3 lx4 LEVEL 4 Full Silent If, when performing a command, a condition exists that does not allow activation of an Alarm feature* or Remote Start feature**, the "~1111¥111111111 or 'zlllll.il'fiiiJIIIU text and a fault tone will play. * See this section and //Feature not Available// in online guide. * * See this section and //Remote Start Error// in online guide. © 2012 Directed. All rights reserved.

The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. The ~-11% text and beeps play to confirm and the System Status Icons update. If Valet mode* is On, the doors lock and the u~0111//11:1~ text and tone play. Exit Valet mode to arm the a Ia rm normally. If a trigger zone fault is detected the siren chirps once again and the Trigger Zone Fault report** plays. To Arm and Panic rl5l Press and hold D The alarm Arms {or Locks in Valet} and, after 2 seconds, sounds the siren and flashes the parking lights. The t!i~rlillllil~ text and siren tones play to confirm. Press the ~or 3 button to stop the output. Disarm ~ Press and release () The alarm disarms, doors unlock (if connected}, and the siren chirps and parking lights flash twice. The g- text and beeps play to confirm and the system status icons update. If Valet mode* is On, the doors unlock and the ;t:j~fll!llti1~; text and tone play. More than 2 siren chirps and remote beeps indicate a trigger has oc- curred. The :~-~ text is replaced by the Alarm report.** © 2012 Directed. All rights reserved. 9

The Trunk opens (if connected) when this button is pressed for 2 sec- onds. The >"IIUNII text and tones ploy to confirm. Remote Start Press and release ~~:} Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On and the ~~WIIMDIII1111•tt:@"' text and tones ploy, or the engine and parking lights turn Off and the ;>WIIIlfiii>B~Jlt:Jlff text and tones ploy to confirm, the Remote Start status icons update. The {:}icon will display in the status screen and the text field will display the Runtime, Temperature or Clock as programmed. If Remote Start foils to activate, ss'llflfi11WIIiltvlllfll7t> text and a fault tone ploy while the parking lights flash to identify the reason.*** j * See "Remote and System Operations" in on-~~e gu~e.----------------- 1 I ** See ''Alarm Features" in online guide. ; J * * * See "Remote Start Error" in online guide. ; I ~~:~~~~~~~~~;m~~~;;_ vehic~es~:"~a:~ T==~~:::_:~~~:_: 10 © 2012 Directed. All rights reserved.

The Responder LC can be customized through the Main Menu. Con- figurable feature details can be found in the expanded online guide. Navigating menus and options Navigating menus and features, changing options, and exiting are performed using the remote control buttons. The following instructions discuss how to access and configure the settings. BuHon operation • To access menus, set options, and to perform actions that are displayed in the text field, use the f button. • To scroll the menu lists in the text fiel~se the 8& {:) buttons. • To exit configuration: use the eJ or ()buttons. Access menu items 1. Press and hold the f button for 8 seconds, the remote will beep once, r:::leM!:Iti[JI .. ;r is displayed. (If Car 2 is on, ignore the Car Select text and beep after 3 seconds}. 2. Release the f button to display the Main Menu item list, 'I' -~y- -···-··-········:-· ...... , ... , .... , ..... , ... , ...• : is dis Ia ed. · .. "· .; ...... , ..... -~ ... , .................... _ ............... - p y 3. The Main Menu has been accessed and configuring can begin. Use the following process to view the Main Menu features, op- tions and settings in the text field. The following actions are com- monly used throughout the configuration operation. • Press the 8 or {:) buttons to change the feature or option that is displayed in the text field. • Press the f button to choose the feature in the text field and view its options. Press it when the desired feature or option is in the text field to set it as the new setting. © 2012 Directed. All rights reserved. 1 1

Direct Access Arm/Lock (Panic) Disarm/ Unlock Remote Start Aux/Trunk Not Used 12 Command --+f--1H-*-l Buttons /x2 Timer Start /x4 LEVEL 4 Full Silent Defogger © 2012 Directed. All rights reserved.

The Responder LC remote control is powered by on internal recharge- able battery that con be serviced g_o_Gt through on authorized Directed Electronics dealer. BaHery Information ( 1-Way) The 1 way companion remote is powered by one 3V coin cell lithium battery (PN CR-2032) that will last approximately one year under normal use. Battery Disposal Directed cores about the environment. If you need to dis- pose of the battery, please do so in accordance with your municipal requirements for battery disposal. © 2012 Directed. All rights reserved. 13

patents: Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053; 7,483,783 Vehicle Security Patents: 5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591; 5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484 Other patents pending. Gmternment!egulotions . This device complies with Part 15 of FCC rules . Operation is subject to the fol- lowing two conditions: ( 1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates and can radiate radio frequency en- ergy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be 14 © 2012 Directed. All rights reserved.

try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into on outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or on experienced radio /TV technician for help. Remote Controls To satisfy FCC RF exposure compliance requirements, this device should be used in hand-held, hand operated configurations only. The device and its an- tenna must maintain a separation distance of 20 em or more from the person's body, except for the hand and wrists, to satisfy RF exposure compliance. This device is designed to be used in a person's hands and its operating configu- rations do not support normal transmissions while it is carried in pockets or holsters next to a person's body. Control Center To satisfy FCC RF exposure compliance requirements, the device and its an- tenna must maintain a separation distance of 20 em or more from the person's body, except for the hand and wrists, to satisfy RF exposure compliance. This device complies with the Industry Canada Radio Standards Specification RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device. WARNING! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this de- vice. © 2012 Directed. All rights reserved. 15

'1\ Please read the safety warnings below before proceeding. Improper ~ use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at l-800-753-0600. Remote Start Capable When properly installed, this system can start the vehicle via a command signal from the remote control transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed menu wheel. It is the user's sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle. THE USER MUST IN- STALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIV- ING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STOR- AGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user. Manual Transmission Vehicles Remote starters on manual transmission vehicles operate differently than those with automatic transmission because you must leave your car in neutral. You must read this Owner's Guide to familiarize yourself with the proper procedures regarding manual transmission remote starters. If you have any questions, ask your authorized Directed dealer or contact Directed at l-800-753-0600. 16 © 2012 Directed. All rights reserved.

• Leave the vehicle in neutral and be sure no one is standing in front or behind the vehicle. • Only remote start on a flat surface • Hove the parking broke fully engaged WARNING! It is the responsibility of the owner to ensure the parking/ emer- gency broke properly functions. Failure to do so con result in personal injury or property damage. We recommend the owner hove the parking /emergency broke system inspected and adjusted by a qualified automotive shop biannu- ally. Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or death. ( 1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also hove the neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the cor is in gear. This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation guide. If the vehicle starts in gear, cease remote start operation im- mediately and consult with the authorized Directed dealer to fix the problem . After the remote start module has been installed, contact your authorized dealer to hove him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by on authorized Directed dealer. OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN © 2012 Directed. All rights reserved. 17

ATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMME- DIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this guide. This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission. Installation in such vehicles may pose certain risk. Interference All radio devices are subject to interference which could affect proper performance. Upgrades and Batteries Any upgrades to this product and/ or installation of batteries must be performed by an authorized dealer. Do not attempt to perform any unauthorized modifications to this product. Water/Heat Resistance This product is not designed to be water and/ or heat-resistant. Please take care to keep this product dry and away from heat sources. Any damage from water or heat will void the warranty. 18 © 2012 Directed. All rights reserved.

Directed Electronics. ("Directed") promises to the original purchaser to repair or replace (at Directed's election) with a comparable reconditioned model any Directed unit (hereaf- ter the "unit"), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be profession•ally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer's name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All com- ponents other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED. This warranty is non-transferable and is automatically void if: the unit's date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to the unit caused by installation or removal of the unit. Directed, in its sole discretion, will determine what con- stitutes excessive damage and may refuse the return of any unit with excessive damage. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR © 2012 Directed. All rights reserved. 19

OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER'S PURCHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. This warranty is only valid for sale of product(s) within the United States of America and in Canada. Product(s) sold outside of the United States of America or Canada are sold "AS-IS" and shall have NO WARRANTY, express or implied. For further details relating to warranty information of Directed products, please visit the support section of Directed's website at: www.directed.com This product may be covered by a Guaranteed Protection Plan ("GPP"). See your authorized Directed dealer for details of the plan or call Directed Customer Service at 1-800-876-0800. 9 2 0-1 00 1 1 -0 1 2 0 1 1 -06 20 © 2012 Directed. All rights reserved.

Vista, CA 92081 www.viper.com The company behind Viper® Auto Security Systems is Directed. Since its inception, Directed has had one pur- pose, to provide consumers with the finest vehicle security and car stereo products and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Quality Directed products are sold and ser- viced throughout North America and around the world. Call (800) 876-0800 for more information about our products and services. ORG5704VML 2012-08

remote start system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many fea- tures. Please visit: www.viper.com – For general and additional guide information. For any additional questions please contact your autho- rized Directed dealer or contact Directed at 1-800-753-0600. What you get Welcome to the best generation of security with remote start. Your system contains everything you need. sResponder LC remote control with SST technology for superior range and reliability s1-way Companion remote control sAC adapter for charging your remote control sOwner’s guide and Warranty card A U X Warranty Card Owner’s Guide

Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system. Warning! Failure to heed this information can result in death, personal injury or property damage and may also result in the illegal use of the system beyond its intended purpose. Your Warranty Your Responder LC system comes with a warranty. Please make sure you receive the warranty registration card and proof of purchase from your dealer indicating the product was installed by an authorized Directed dealer. Please validate it online at www.prodregister.com/ directed or complete and return the warranty registration card. Replacement remote controls If additional remote controls are desired, please see your authorized dealer or visit us at www.directedstore.com to order. Part numbers are: 7752V for Responder LC 2-way remote control and 7652V for the companion remote control. Your system can also be used with optional Responder HD color 2-way remote control (7941V).

Charging the remote control: ................................................................. 4 Keys to using this manual ...................................................................... 5 Responder LC 2-Way........................................................................................... 6 Status Screen Icons .............................................................................................. 8 Using your System ............................................................................................. 11 Commands and Confirmations ............................................................ 11 Performing Commands ....................................................................... 11 Responder LC Command table ............................................................ 12 Fault Condition Alerts ......................................................................... 12 Basic commands (Direct Access) ......................................................................... 14 Arm ................................................................................................. 14 Disarm ............................................................................................. 14 AUX/Trunk ........................................................................................ 15 Remote Start ...................................................................................... 15 Advanced commands: (Level 1) .......................................................................... 16 Silent Arm ......................................................................................... 16 AUX 1 .............................................................................................. 16 Runtime Reset .................................................................................... 17 Temp Request .................................................................................... 17 Advanced commands: (Level 2) .......................................................................... 18 Sensor Bypass ................................................................................... 18 Remote Valet .................................................................................... 18 AUX 2 .............................................................................................. 18 Timer Start ........................................................................................ 19 Runtime Remaining ............................................................................ 19 Advanced commands: (Level 3) .......................................................................... 20 Sensor Silent Arm .............................................................................. 20 AUX 3 .............................................................................................. 20 Smart Start ........................................................................................ 21 Alarm Report ..................................................................................... 21 Advanced commands: (Level 4) .......................................................................... 22 Full Silent Arm ................................................................................... 22 AUX 4 .............................................................................................. 22 Defogger .......................................................................................... 22 Responder LC configuration ............................................................................... 23 Navigating menus and options ............................................................ 23 Button operation ................................................................................ 23 Access menu items ............................................................................ 23

Setup Remote menu: ........................................................................... 24 Remote Start Info ............................................................................... 25 Runtime Alert ..................................................................................... 26 Car 2 ............................................................................................... 26 Screen Color ..................................................................................... 26 Temp Unit ......................................................................................... 26 Button Beep....................................................................................... 27 System Type ...................................................................................... 27 Clock Set .......................................................................................... 27 Review ............................................................................................. 27 Exit .................................................................................................. 27 Sensor Adjust: ................................................................................... 27 Pair Remote:...................................................................................... 28 Demo mode: ..................................................................................... 28 Power Off: ........................................................................................ 29 Exit: ................................................................................................. 29 Alarm Features ................................................................................................. 30 Normal Arm Protection ....................................................................... 30 Sensor Silent Arm protection ............................................................... 30 Full Silent Arm Protection .................................................................... 31 Sensor Warn-away Messages ............................................................. 31 Full Trigger Messages ......................................................................... 31 Emergency Override .......................................................................... 31 Trigger Zone Fault Report.................................................................... 32 Alarm Report when disarming ............................................................. 32 Alarm Report when requested ............................................................. 33 Nuisance Prevention (NPC) ................................................................. 33 Remote Start Features ........................................................................................ 34 Pit Stop Mode ................................................................................... 34 Key Takeover..................................................................................... 34 Remote Start Safe-lock ........................................................................ 35 Disabling Remote Start ....................................................................... 35 Advanced Start ................................................................................. 35 Temperature Reporting ........................................................................ 36 Remote Start Time-out Alert .................................................................. 37 Manual Transmission Start (MTS mode) ................................................ 37 Turbo Timer Mode .............................................................................. 38 Remote Start Error .............................................................................. 39

Passive Arming .................................................................................. 40 Auto Re-arming .................................................................................. 40 Valet Mode ....................................................................................... 41 Power Save ....................................................................................... 41 Rapid Resume ................................................................................... 41 Automatic Remote Updates ................................................................. 41 Out of Range .................................................................................... 42 No Remote Output ............................................................................. 42 Feature not Available ......................................................................... 42 1-way Companion Remote Control ..................................................................... 43 Accessing Commands ........................................................................ 44 Button Auto Lock ................................................................................ 44 Car Select ......................................................................................... 44 Programming .................................................................................... 45 Battery Information (1-Way) ................................................................ 46 System Expansion Options ................................................................................. 47 Battery Information (Responder LC) ..................................................................... 49 Low Battery ....................................................................................... 49 Battery Life ........................................................................................ 50 Battery Disposal ................................................................................ 51 Glossary of Terms .............................................................................................. 52 Government Regulations .................................................................................... 54 Warning! Safety First ......................................................................................... 56 Installation ........................................................................................ 56 Remote Start Capable ........................................................................ 56 Manual Transmission Vehicles ............................................................. 56 Interference ....................................................................................... 58 Upgrades and Batteries ...................................................................... 58 Water/Heat Resistance ...................................................................... 58 Limited lifetime consumer warranty ..................................................................... 59

Getting Started Your Responder LC remote is powered by an internal rechargeable battery that can only be serviced by an authorized Directed dealer. Due to transit and storage time prior to your purchase, the battery charge may have depleted. To ensure proper operation, check the battery level and connect the battery charger if not fully charged. See “Battery Information (Responder LC)” on page 49 and “Status Screen Icons” on page 8 for more information about the battery. Charging the remote control: 1. Plug the AC adapter into a 110V AC outlet. Insert the mini-USB connector into the mini-USB port located on the side of the remote control (see diagram under Responder LC 2-way). The text field will display CHARGE to indicate the remote control is charging (The remote remains operational while charging and can command the system). 2. Once fully charged the text field will display FULL . 3. The remote control is then ready for use. Disconnect the mini- USB end from the remote control first and then the AC adapter from the AC outlet. Note If the battery is excessively depleted when the charger is connected, functionality may be delayed while it charges to the minimum voltage required to operate the display, after which normal charging resumes.

At a Glance 5 Keys to using this manual Specific actions (in bold type) and style conventions are used consis- tently throughout this manual, they are as follows: sPress: implies pushing in and releasing a button. sHold: is used after Press actions when a button needs to be held in position for an extended period of time, typically several sec- onds. sARMED this style denotes the text which appears in the text field portion of the Display during operations described in the manual. If the text string is too long for the text field, it then plays and loops sequentially word by word. sItalicized words denote section/sub headings in this guide and can be located through the table of contents. sAn asterisk (*) when used after a word or phrase denotes that additional details can be found in related sections usually noted at the bottom of the page or end of the section.

6 Responder LC 2-Way Command Buttons Display Function Button Mini-USB Port Internal Antenna Feature Description Internal Antenna Used for transmitting and receiving information Display Status screen - the upper portion of the display contains status icons for the System, Siren, Alarm zones, Remote Start and Remote Control. Text field - the lower portion of display - shows the Clock, Runtime or Temperature during Remote Start, as well as Command confirmations, Page messages and programming menus Command buttons (4) Used to perform arming, disarming, auxiliary channel and remote start commands Function button Used to access function levels for commands, configura- tion menus for programming, Car Selection, and to request reports. Mini-USB Port The battery charger plugs into this port.

At a Glance 7 Control Center Status LED Control button The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: sThe In-vehicle system antenna, for 2 way communication. sThe Status LED, as a visual indicator of the system’s status. sThe Control button, for placing the system into Valet Mode* and to perform the Emergency Override** operation. * See “Remote and System Operations” on page 40 for details. ** See “Alarm Features” on page 30 for details.

Status Screen Icons 1 ALL Text Field Status Screen Icons The table below describes all the status screen icons. Icon Description System Status Armed: The system is Armed, the alarm is enabled. Locked: The system is Locked in Valet, the alarm is disabled. Disarmed: The system is Disarmed, the alarm is disabled. Unlocked: The system is Unlocked in Valet, the alarm is dis- abled. Siren Status Siren is disabled for sensor triggers; remote is paged for all trig- gers (Sensor Silent Arm). + ALL Siren is disabled for all triggers; remote is paged for all triggers (Full Silent Arm). Remote Start Remote start is active, the engine is running. Timer Start is On; Remote Start is On. Note: When the icon is without an arrow head: Timer Start is enabled: Remote Start is Off

At a Glance 9 Icon Description Remote Start + Smart Start is On; Remote Start is On. Note: When the icon is without an arrow head: Smart Start is On; Remote Start is Off. Manual Transmission Start mode is enabled, the engine can be started Displays the vehicle interior temperature On during Remote Start after performing the Defogger On command Zone Status On during Warn-away and Full Trigger message output On during Trunk Zone Full Trigger output and Aux/Trunk channel activation On during Fault Report to indicate the Trunk is open and bypassed when arming On during a Sensor Zone Full Trigger output On during Fault Report to indicate a Sensor is active and bypassed when arming On during the Door Zone Full Trigger output On during Fault Report to indicate a Door is open and bypassed when arming On during a Hood Zone Full Trigger output On during Fault Report to indicate the Hood is open and bypassed when arming On when remote is set to command the system programmed as Car 1* On when remote is set to command the system programmed as Car 2*

10 Icon Description Remote Control Status Bars indicate battery level is Full, ¾,½,¼ or Empty On while the remote control is transmitting a command On while the remote control is receiving a message On with Out of Range fault tone to indicate the remote failed to receive a command confirmation Pager on: The remote will wake up to listen for messages Pager off: The remote will not wake up to listen for messages The remote will Vibrate when messages are received The remote will emit Beeps and Tones when messages are received Text field Displays the Clock, Runtime, Temperature, message text and feature menus On after the Garage Open** message has been received. On after the Garage Closed** message has been received. * This icon not present until the Car 2 is turned on in the Setup Re- mote configuration menu. ** This icon not present until the remote is paired with an optional garage door opener.

Commands 11 Using your System Commands and Confirmations Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used security and remote start fea- tures while Advanced commands control more specialized features and request reports. Confirmations for Basic or Advanced commands are indicated first by siren chirps and parking light flashes, and then by Text, Icons and beeps or tones on the remote control. A description of each feature confirmation is found in the following Basic command and Advanced command sections. Performing Commands Perform Basic commands by pressing one of the command buttons while in the Direct Access level. Direct access is available while the text field displays the Clock, Temperature or Runtime. Perform Ad- vanced commands by first accessing one of the Function Levels and then pressing one of the command buttons while within a level. Func- tion Levels are available when the text field displays LEVEL 1,2,3 or 4. Advanced command example: Silent Arm 1. Press the button once to access Function Level 1, the text field will display LEVEL 1 . 2. Press the button while LEVEL 1 text is still on to perform the Silent Arm command. 3. The Responder LC remote will display SILENT ARMED in the text field and update the status screen icons.

12 Responder LC Command table Button Level Direct Access x 1 LEVEL 1 x 2 LEVEL 2 x 3 LEVEL 3 x 4 LEVEL 4 Arm/Lock (Panic) Silent Arm Sensor Bypass Sensor Silent Arm Full Silent Arm Disarm/Unlock Silent Disarm Remote Valet Car Finder Remote Start Runtime Reset Timer Start Smart Start Defogger A U X Aux/Trunk AUX 1 AUX 2 AUX 3 AUX 4 Advance Level Change Car (3s), Enter programming (8s) Temperature Check Runtime Remaining Alarm Report Fault Condition Alerts If, when performing a command, a condition exists that does not allow activation of an Alarm feature* or Remote Start feature**, the NOT AVAILABLE or REMOTE START ERROR text and a fault tone will play. * Alarm feature not available when the system status is incorrect upon receiving the command. (Example: Sensor bypass com- mand is received when disarmed). Refer to the notes included in the following command descriptions that address these faults or go to “Feature not Available” on page 42 for more details.

Commands 13 ** Remote Start feature not available when the Remote Start status is incorrect upon receiving the command. (Example: Runtime reset command received when remote start is off) Refer to the notes included in the command descriptions that ad- dress these faults or go to “Remote Start Error” on page 39 for more details.

14 Basic Commands (Direct Access) Arm Press and release The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. The ARMED text and beeps play to confirm and the System Status Icons update. If Valet mode* is On, the doors lock and the VALET text and tone play. Exit Valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the Trigger Zone Fault report** plays. To Arm and Panic Press and hold The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds the siren and flashes the parking lights. The PANIC text and siren tones play to confirm. Press the or button to stop the output. Disarm Press and release The alarm disarms, doors unlock (if connected), and the siren chirps and parking lights flash twice. The DISARM text and beeps play to confirm and the system status icons update. If Valet mode* is On, the doors unlock and the VALET text and tone play. More than 2 siren chirps and remote beeps indicate a trigger has oc- curred. The DISARM text is replaced by the Alarm report.** 6:30

Commands 15 AUX/Trunk Press and hold AUX The Trunk opens (if connected) when this button is pressed for 2 sec- onds. The TRUNK text and tones play to confirm. Remote Start Press and release Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On and the REMOTE START ON text and tones play, or the engine and parking lights turn Off and the REMOTE START OFF text and tones play to confirm, the Remote Start status icons update. The icon will display in the status screen and the text field will display the Runtime, Temperature or Clock as programmed. If Remote Start fails to activate, REMOTE START ERROR text and a fault tone play while the parking lights flash to identify the reason.*** * See “Remote and System Operations” on page 40 for details. ** See “Alarm Features” on page 30 for details. *** See “Remote Start Error” on page 39 for details. For Manual transmission vehicles see “Manual Transmission Start (MTS mode)” on page 37 for more details.

16 Advanced Commands: (Level 1) Press and release the button 1 time. Silent Arm Press and release The alarm arms, doors lock (if connected), and the parking lights flash once. The SILENT ARMED text plays to confirm and the System Status icons update. Valet mode* or Trigger Zone Fault report** messages may be received. Silent Disarm Press and release The alarm disarms, doors unlock (if connected), and the parking lights flash twice. The SILENT DISARM text plays to confirm and the System Status icons update. The Alarm report** may replace the Silent Dis- arm text. AUX 1 Press and release AUX Activates (or if On, deactivates) the Aux 1 output. The AUX CHANNEL text and On tones or Off tones play to confirm. level 1

Commands 17 Runtime Reset Press and release If more time is needed while remote start is active, runtime reset will reset the runtime counter to the pre-programmed setting. The RUNTIME text and tones play to confirm. The text field will update if set to display runtime. Note Remote Start must be On to use this feature. Temp Request Press and hold the button Requests the vehicle’s interior temperature and temporarily displays it via status screen icon and text field. * See “Remote and System Operations” on page 40 for details. ** See “Alarm Features” on page 30 for details.

18 Advanced Commands: (Level 2) Press and release the button 2 times. Sensor Bypass Press and release The parking lights flash each time this command is received to indicate the Sensor bypass type. 2 flashes indicates sensor Warn-away zones are bypassed. BYPASS WARN , 1 beep and 1 fault tone play to con- firm. 3 flashes indicates sensor Warn-away and Full Trigger zones are bypassed. BYPASS FULL , 1 beep and 2 fault tone play to confirm. 1 flash indicates sensor bypass is Off, BYPASS OFF and 1beep play to confirm.. Note System needs to be armed to perform Sensor Bypass. Perform arm command any time to turn Sensor Bypass Off. Remote Valet Press and release Enters (or if On, exits) Valet Mode. The VALET text and beeps (1 for On, 2 for Off) play to confirm and the System Status icons update. See Valet Mode for more details AUX 2 Press and release AUX Activates (or if On, deactivates) the Aux 2 output. The AUX CHANNEL text and On tones or Off tones play to confirm. level 2

Commands 19 Timer Start* Press and release Activates (or if On, deactivates) Timer Start. The parking lights flash quickly four times for On and slowly four times for Off. The TIMER START ON or TIMER START OFF text and beeps play to con- firm and the Remote start status icons update. Note System needs to be armed or Timer Start will not start the engine. Runtime Remaining Press and hold the button Requests the remaining Remote start runtime and temporarily displays it in the text field. Note Remote Start must be On to use this feature. * See “Advanced Start” on page 35 for more details.

20 Advanced Commands: (Level 3) Press and release the button 3 times. Sensor Silent Arm* Press and release The alarm arms, doors lock, the siren chirps and parking lights flash 3 times. The SENSOR SILENT ARM text and beeps play to confirm and the System and Siren Status icons update. Car finder Press and release The siren emits one long chirp and the parking lights flash for 10 seconds. The CAR FINDER text and beeps play to confirm. The parking light flashes stop if armed or disarmed while Car Finder is in progress. AUX 3 Press and release AUX Activates (or if On, deactivates) the Aux 3 output. The AUX CHANNEL text and On tones or Off tones play to confirm. level 3

Commands 21 Smart Start** Press and release Activates (or if On, deactivates) Smart Start. The parking lights flash quickly five times for On and slowly five times for Off. The SMART START ON or SMART START OFF text and beeps play to con- firm and the Remote start status icons update. Note System needs to be armed or Smart Start will not start the engine. Alarm Report* Press and hold the button Requests a report of the most recent triggers and temporarily displays it in the text field. The report clears when the ignition is turned on. * See “Alarm Features” on page 30 for more details. ** See “Advanced Start” on page 35 for more details.

22 Advanced Commands: (Level 4) Press and release the button 4 times. Full Silent Arm* Press and release The alarm arms, doors lock, and the siren chirps and parking lights flash 4 times. The FULL SILENT ARM text and beeps play to confirm and the System and Siren Status icons update. AUX 4 Press and release AUX Activates (or if On, deactivates) the Aux 4 output. The AUX CHANNEL text and On tones or Off tones play to confirm. Defogger** Press and release Activates the vehicle Defogger circuit (if connected) while Remote Start is activated. The DEFOG ON text and beeps play to confirm and the Remote Start status icons update. For convenience, the Defogger cir- cuit will also automatically activate 10 seconds after remote starting if the temperature is below 55°F. Note Remote Start must be active to use this feature. * See “Alarm Features” on page 30 for more details. ** This feature must be installed and turned on by an authorized Directed dealer. level 4

Configurations 23 Responder LC Configuration Operations of the Responder LC and how it communicates messages are set in the configuration Main Menu. Navigating menus and options Navigating menus and features, changing options, and exiting are performed using the remote control buttons. The following instructions discuss how to access and configure the settings. Button operation sTo access menus, set options, and to perform actions that are displayed in the text field, use the button. sTo scroll the menu lists in the text field use the AUX & buttons. sTo exit configuration: use the or buttons. Access menu items 1. Press and hold the button for 8 seconds, the remote will beep once, MAIN MENU is displayed. (If Car 2 is on, ignore the Car Select text and beep after 3 seconds). 2. Release the button to display the Main Menu item list, SETUP REMOTE is displayed. 3. The Main Menu has been accessed and configuring can begin. Use the following process to view the Main Menu features, op- tions and settings in the text field. The following actions are com- monly used throughout the configuration operation. sPress the AUX or buttons to change the feature or option that is displayed in the text field. sPress the button to choose the feature in the text field and view its options. Press it when the desired feature or option is in the text field to set it as the new setting.

24 Main Menu The following Main Menu list of features is available for configuration of the remote control. Setup Remote menu: Keypad Lock Options: OFF , AUTO When OFF , the buttons do not lock and always perform a com- mand when pressed. When set to AUTO , the remote buttons lock after a 20 second lapse between buttons presses to prevent unintentional operations. If a button is pressed when locked a fault tone plays as an alert followed by unlock instructions in the text field. To unlock the buttons, press the button followed by the button. The unlock tones play and READY is displayed in the text field, a command can now be performed. Auto unlocking After turning the ignition off, a message to the remote will un- lock the keypad buttons the next command is performed. If Auto Unlocking is not desired this message can be turned off by an authorized Directed Dealer. Page Mode Options: POWER SAVE , OFF , ON Paging is how the Responder LC remote monitors your system’s messages. POWER SAVE extends battery life by turning Paging

Configurations 25 Off after 72 hours if the remote control is not used during this period. Just press any button to resume system monitoring. When set to ON it wakes up every few seconds to listen for pages from the system. When set to OFF it does not wake up to receive remote start or alarm trigger pages. Note: When OFF , responses are still received when a command is performed but alarm trigger pages will not be received. Page Alert Options: TONE VIBE , TONE , VIBE , SCREEN ONLY There are several ways for the Responder LC to alert you when it has received a message from the system. TONE VIBE will alert by both emitting tones and vibrating the re- mote. Select TONE to be alerted by tones that are unique for each message. Select VIBE and the Responder LC will silently alert you with a gentle vibration, or select SCREEN ONLY when you don’t want to be interrupted. Remote Start Info Options: RUNTIME , TEMP , CLOCK The text field can be set to display the information you prefer dur- ing remote start. RUNTIME : Remote Start Runtime, TEMP : vehicle interior Temperature, or the CLOCK will be displayed in the text field while Remote Start is on.

Runtime Alert Options: ON , OFF The main unit will send a page to alert you when the runtime is about to expire. When set to ON , an alert is generated when the Remote Start Time-out message is received. When OFF , no alert output is emitted for the message. Car 2 Options: OFF , ON , HOME This remote can control two systems independently. When set to OFF , the Car2 select option is not available. When set to ON the remote can be set to control 2 systems. The HOME option is for pairing to a home security system. Screen Color Options: OFF , WHITE ,LT GRN, VIOLET, AQUA , RED , GREEN, BLUE The status screen backlighting can be OFF , or will illuminate with a selected color during output when set to one of the option colors. Temp Unit Options: F , C Temperature can be displayed in your choice of temperature scales, Fahrenheit or Celsius.

Configurations 27 Button Beep Options: ON , OFF When set to ON , the remote will emit a beep as confirmation of a button press. When set to OFF , beeps are not emitted for button presses. System Type Options: SEC , RKE Selects the type of system, namely; Security or Remote Keyless Entry to which the remote has been paired, and adjusts the text and main menu accordingly. This has been pre-set by the factory for your system. Clock Set Options: HOUR , MIN Review Displays firmware version Exit Exits and returns to the main menu Sensor Adjust: If you feel your security system shock sensor is too sensitive or not sensitive enough, it is highly recommended that you contact your au- thorized Directed dealer/professional and have the sensor adjusted for optimized security detection performance.

28 Pair Remote: Remote Pair is a process where the Responder LC and the system in the vehicle learn each others encrypted identification, securing their communication from intruders. Please note that your remote controls come pre-programmed from the factory. Prepare the vehicle system to be Paired with a new remote 1. Open at least one of the vehicle’s doors. 2. Turn the key to the On position. 3. Within 5 seconds press and release 1 time the Control button on the Control Center. 4. Within 5 seconds, press and hold the Control button. The status LED will flash one time and the siren will chirp once to confirm the system is ready for remote pairing. 5. Release the Control button and proceed below. Note: If pairing does not result within 60 seconds, the system will exit and the siren will chirp. Prepare the new remote to be Paired with the system 1. Make sure the remote control is set for the desired Car 1 or Car 2 operation. 2. Perform the steps under Access menu items section to access the Pair Remote mode. 3. When the remote beeps 3 times and PAIR is displayed the remote is ready to pair. 4. Press and hold the button, the siren will chirp once and the remote will emit several tones to confirm successful pair- ing. SUCCESS is displayed and the remote returns to the main menu. Note: FAILED will be displayed and the remote will stay in the pair mode in case of an unsuccessful pairing. Check the system status and try again.

Configurations 29 Demo mode: Demo Mode plays a pre-selected group of animations as a demon- stration tool to show friends or family. Running Demo mode shortens the battery life over time if used excessively sSINGLE SILENT : The remote will display a selection of icons on the status screen without beeps and tones then stop sSINGLE SOUND : The remote will display a selection of icons on the status screen with beeps and tones then stop sLOOP SILENT : The remote will display a selection of icons on the status screen without beeps and tones in an endless loop until the battery charger is disconnected. sLOOP SOUND : The remote will display a selection of icons on the status screen with beeps and tones in an endless loop until the battery charger is disconnected. Note: Loop Silent and Loop Sound are not available and will not appear in the Demo Mode menu unless the battery charger is con- nected. Power Off: When an extended period of non-operation is anticipated, turning the power off will preserve the battery charge. Press the button while POWER OFF is displayed. The status screen icons clear as the power off tones play, the remote is turned off. To turn the remote on, Press and hold the button for 3 seconds, the status screen icons refresh as the power on tones play. The remote also turns itself on and begins charging when the battery charger is connected. Exit: To return to normal operation, press the button while EXIT is dis- played

30 Alarm Features Normal Arm Protection Status LED: The Control Center Status LED flashes as a visual indicator that your vehicle’s security system is active. Starter Kill: The Failsafe starter kill relay prevents the engine from starting Note May require additional parts and installation Sensor triggers: The onboard shock sensor can distinguish minor im- pacts from major impacts to the vehicle exterior. Minor impacts causes the system to emit a Warn-away output by chirping the siren and flashing the parking lights for 3 seconds. Major impacts caused for example by a forcible entry attempt, results in a Full Trigger output. The siren sounds and the parking lights flash for 30 seconds or longer. Both Warn-away and Full Triggers send a message to the remote control. Point of entry triggers: Opening the hood or trunk causes a Full Trig- ger output, while opening a Door or turning on the Ignition causes the the siren to chirp 3 seconds before beginning the Full Trigger output. This 3 second delay allows time to disarm and silence the siren in case of accidental trigger. The Full Trigger message is still sent to the remote. Sensor Silent Arm protection Sensor Warn-away and Sensor Full Trigger activations only send mes- sages to the remote, while the parking light flash and siren outputs are defeated. Point of entry triggers will activate the parking light flash, siren, and send messages normally.

Feature Details 31 Full Silent Arm Protection Sensor Warn-away, Sensor Full Trigger and Point of Entry activations will only send messages to the remote, with parking light flash and siren outputs defeated. Sensor Warn-away Messages When the remote receives a Sensor Warn-away message it emits 10 beeps (if on) and displays a sensor zone specific SENSOR WARN text for 30 seconds. Warn-away messages cannot be reviewed or displayed in reports. Full Trigger Messages A Full Trigger message generates a Full Trigger output of siren tones and zone specific TRIGGER text followed by an alert that consists of 1 long beep per minute for 10 minutes. To stop the output and alert, press a command button to perform a command, or Press the button. Emergency Override The following procedure disarms the system when a programmed re- mote is not available. Number of presses__________ 1. Turn the ignition On. 2. Press the control button on the Control Center the correct number of times (the default is 1 press). 3. After a few seconds the siren output ceases and the system is disarmed. Note As a precaution, if programmed for Passive Arming or Auto re-arming the system should be placed into Valet Mode until a remote is available .

32 Trigger Zone Fault Report When armed by remote command the system runs a status check of the alarm trigger zones. Faulty zones (usually caused by dome light delay or open trunk) are bypassed and reported via the control center LED and remote, while all other trigger zones remain active and are monitored to protect the vehicle. Should a faulty zone self correct (dome light turns off) it becomes active and is then monitored normally. The siren chirps once again a few seconds following the arming chirps as an audible alert, the control center LED flashes in groups to indicate the zone number. The remote will emit a single fault tone and play zone specific text that identifies the faulty zones. Alarm Report when disarming The most recent alarm triggers (if any) are reported when the alarm is disarmed via the remote control, siren chirps, parking light and control center LED flashes. The siren chirps 4 times (or 5 times if NPC On*), the parking lights flash 3 times, and the control center LED flashes in groups to indicate the last two zones that were triggered (see Table of Zones). The DISARM text is replaced by ALARM REPORT and text identifying the triggers. * See “Nuisance Prevention (NPC)” on page 33 for more details.

Feature Details 33 Table of Zones Zone # (led flashes) Zone Name 1 Trunk 2 Shock Sensor 3 Door 4 Sensor 2 5 Ignition 6 Hood Alarm Report when requested The Alarm Report displays the two most recent alarm triggers depend- ing on the system state when requested. When disarmed, the report will display text to identify the two most recent triggers since the ve- hicle was last driven. When armed, the report will display text to identify the two most recent triggers since the system was armed. Note The Alarm Report clears when ignition is turned on. Nuisance Prevention (NPC) NPC monitors all alarm zones and, if any are triggered excessively, bypasses them until corrected. If a point of entry (trunk, hood, door) is left open following a forced entry, it is bypassed. It becomes active again only after being closed. Bypassed sensors automatically reset after one hour and after the vehicle is driven. Disarming then re-arming the alarm does not reset bypassed sensors.

34 Remote Start Features Pit Stop Mode To exit vehicle with engine running The system keeps the engine running during short trips into the house or convenience store. To perform Pit Stop: 1. With the engine running, set the parking brake and release the foot brake. 2. Press the button, the parking lights will turn on and the REMOTE START ON message will play on the remote control. 3. Turn the key to off, and remove it from the ignition, the engine continues running for the programmed runtime. 4. Exit the vehicle and arm the alarm. Note For Pit Stop on manual transmission vehicles follow the direc- tions in the Manual Transmission Start (MTS mode) section. Key Takeover When you are ready to drive The system keeps the engine running until the vehicle is ready to be driven. To perform Key Takeover: 1. Disarm the system and enter the vehicle, do not step on the foot brake. 2. Insert the key, turn it to the run position, and then step on the foot brake, the remote start then turns off. 3. The parking lights turn off to indicate remote start is off, and

Feature Details 35 then after a few seconds the remote plays the REMOTE START OFF message. 4. The vehicle is ready to drive. Remote Start Safe-lock Remote start safe-lock makes sure the doors are locked while the en- gine is running and after, even if they are unlocked when remote start is activated. Door locks may require additional parts and labor. Disabling Remote Start Remote start can be disabled by moving the Toggle Switch to the Off position. If remote start is attempted while Off, the engine will not start. (See “Remote Start Error” on page 39) move the switch back to the On position to resume normal operation. Advanced Start The Advanced start features Timer Start and Smart Start will automati- cally start the engine to maintain battery charge or combat extreme cold when parked for an extended period of time. Precautions for the Advanced Start features: sPark the vehicle in a well ventilated area away from windows and doors that lead into inhabited spaces. sArm and Lock the vehicle, the engine will not start unless the doors are locked. sOnly one Advanced start feature can be enabled at any given time. sFor manual transmission vehicles MTS mode must be enabled before Timer Start or Smart Start can be activated.

36 Timer Start operation Activation begins a countdown timer as set by the installer (de- fault 3 hours). When the timer expires the engine starts and the REMOTE START ON message is sent to the remote control. When the Remote start runtime expires the engine shuts off, the REMOTE START OFF message is sent to the remote control and the countdown timer restarts. This will repeat as many times as set by the installer (default 6 starts). Timer Start is exited after the final start. Smart Start operation Smart Start uses the settings for Timer Start in addition to temperature and battery level to automatically start the engine. Activation begins the countdown timer. When the timer expires the vehicle interior tem- perature and battery level is checked and, if the Temperature is above 100F, below 0F, or the battery level is below 10.5v, the engine will start and the REMOTE START ON message will be sent to the remote controls. When the Remote start runtime expires the engine shuts off, the REMOTE START OFF message is sent to the remote control and the countdown timer restarts. Smart Start is exited after the final start. Note The temperature and battery thresholds can be changed by an authorized Directed dealer if a higher or lower threshold is desired. Temperature Reporting During Remote start the vehicle interior is checked regularly for tem- perature changes. If a change in temperature is detected this report will be sent to the remote for display. Each time the remote receives this report it will beep, update, and display the newest temperature information using the Temperature Gauge icon.

Feature Details 37 Note Temperature report must be turned on by an authorized Di- rected dealer. Remote Start Time-out Alert During remote start a message is sent three minutes before and again at one minute before the engine turns off. The RUNTIME LOW text plays with tones as an alert to reset the runtime if desired. Manual Transmission Start (MTS mode) When installed into a manual transmission vehicle, the system requires that the MTS mode is properly set when parking. If MTS mode is not properly set or is defeated after being properly set the system will not start the engine and the REMOTE START ERROR text and tones play as an alert. 1. With the engine running, set the parking brake and leave the engine running. For Pit Stop or Turbo Timer mode (to leave the engine running after arming) open the driver door. 2. Release the foot brake (if pressed during Step 1), or press and release the foot brake anytime. As long as the engine is running there is no time limit to perform this step. 3. Within 20 seconds of foot brake release, press any command button on the remote, after 20 seconds return to Step 2 (For Turbo Timer Mode, press the optional dash mounted activation button or send the Timer Mode command from the Advanced Start menu screen). 4. The parking lights flash 5 times to confirm MTS mode enable and the remote start activates the ignition outputs. The REMOTE START ON text and beeps play to confirm. 5. Turn Off and remove the key from the ignition switch, the engine remains running.

6. Exit the vehicle, close all the doors and arm the system. 7. The engine turns off and after a few seconds, the REMOTE START OFF message plays to confirm. If the door is opened in Step 3 then the engine continues to run. Turbo Timer Mode The system keeps the engine running for the Turbo Timer runtime and can be activated by remote control or optional dash mounted activa- tion button. 1. With the engine running, set the parking brake. 2. Press the optional dash mounted activation button or perform the Timer Mode command. 3. The parking lights turn on and the remote start activates the igni- tion outputs. The REMOTE START ON text and beeps play to con- firm. 4. Turn Off and remove the key from the ignition switch, the engine remains running. 5. Exit the vehicle, close all the doors and arm the system. 6. The engine runs for the Turbo Mode runtime. Note Turbo Timer must be turned on by an authorized Directed dealer.

Feature Details 39 Remote Start Error For user safety, the system must be properly configured or remote start will not activate. Refer to the table below for the screens and parking light flashes that will identify the configuration issue and resolution. Flashes * Possible Fault Solution 5 Brake on Release foot brake 6 Hood open Close hood 7 After performing Remote Start command - MTS not enabled After performing Timer Start or Smart Start command Enable MTS mode Check all Solutions 8 Toggle Switch off Turn switch on None Alarm is triggered Disarm or reset alarm * Refers to the number of parking light flashes.

40 Remote and System Operations Passive Arming* Park and exit the vehicle, after the doors are closed the Passive arm- ing countdown begins. The led flashes quickly and upon reaching 20 seconds the siren then chirps once. At 30 seconds the system arms itself. Anytime before the system arms you can re-enter the vehicle or open the trunk to load or unload items and, after closing passive arm- ing resumes. To stay secure in case of accidental disarming the system, if a door is not opened within 30 seconds the system re-arms itself and locks the doors. Auto Re-arming* Auto re-arm ensures the vehicle stays protected if it is not entered after disarming by remote control. After disarming by remote, the alarm automatically re-arms itself (and locks the doors if programmed on) in 30 seconds. Open any point of entry to stop the re-arm until the next disarm by remote. Onetime Bypass* Turn the ignition On for one to three seconds and then Off. The siren chirps once to confirm one-time bypass is enabled. One-time bypass can be used to temporarily bypass the Passive arm- ing operation for one cycle. It also bypasses the comfort closure and auxiliary channel outputs programmed to activate when arming. After the next disarm all operations return to normal. * These features must be turned on by an authorized Directed dealer.

Feature Details 41 Valet Mode Valet mode can be entered and exited by performing the Remote Valet command or manually using the vehicle key and the control button. When entered, the alarm functions are defeated while the conve- nience features still operate normally. Arm and Disarm commands lock and unlock the doors while the VALET text and beeps play to confirm. Use the following steps to manually enter and exit Valet Mode: 1. Turn the ignition switch On and then Off 2. Immediately press and release the control button once 3. The control center LED turns On when entering and Off when exiting. Power Save To reduce power consumption the control center status LED modifies its output if the vehicle is parked for an extended period. If Armed the flashing is reduced after 24 hours. When Valet mode is On the LED will turn off 1 hour and will reset each time the ignition is turned off. Rapid Resume If power is ever disconnected by a mechanic or thief, the system will resume the state it was in at the time of disconnection, when power is reconnected. Automatic Remote Updates The system sends a silent message to all remote controls after any major action has occurred. When the remote receives this message it updates the status screen icons. This way all users are able to quickly review the system status just by accessing the status screen.

42 Out of Range Each time a command is performed the remote will expect a com- mand confirmation from the system. If a command confirmation is not received the out-of-range icon ( ) and a fault tone will play as an alert. No Remote Output Occasionally when a command is performed the remote may not generate a command confirmation output or Out of Range output. This indicates that the system received the command but it was an incomplete command (e.g. Aux button pressed too short to activate the trunk release) or it was an illegal message (e.g. the command was corrupted due to local RF interference). These are temporary nor- mal functions of the system and remote, perform the command again within 10 seconds to return to normal operation. Feature not Available The NOT AVAILABLE message is a generic one which varies in cause and solution depending upon the command used: Command Cause Reason/Solution Runtime Reset Remote Start is Off Only available when Remote Start is On Sensor Bypass System is not armed Only available when system is armed Defroster Remote Start is Off. Not configured for this. Only available when Remote Start is On. Only available when configured for Defroster control.

1-Way 43 1-way Companion Remote Control A U X LED Command Buttons Function Button Button Level Direct Access x 1 LEVEL 1 x 2 LEVEL 2 x 3 LEVEL 3 x 4 LEVEL 4 Arm/Lock (Panic) Silent Arm Sensor Bypass Sensor Silent Arm Full Silent Arm Disarm/ Unlock Silent Disarm Remote Valet Car Finder Remote Start Runtime Reset Timer Start Smart Start Defogger A U X Aux/Trunk AUX 1 AUX 2 AUX 3 AUX 4 Not Used Used to access function levels for Advanced Commands ( with multiplier in top row implies button presses)

44 Using the 1 way companion remote The companion 1 way remote commands the system features as shown in the previous table, but without the message display of the Responder LC remote. Siren chirps and parking light flashes are used to indicate that a command has been received and activated as de- scribed in the Basic and Advanced command sections. Accessing Commands Similar to the Responder LC remote, Basic commands are performed when a command button is pressed directly. To perform Advanced Commands press the button 1 to 4 times to access function lev- els, x4 in the table for example implies pressing 4 times. The LED flashes in groups for a few seconds to indicate the level. Press the desired command button while the LED is flashing to perform the command. Button Auto Lock When On, the remote control buttons lock if more than 20 seconds lapses between button presses. If a button is pressed when locked, a fault tone is emitted. To unlock the buttons; press the button followed by the button, the buttons unlock and tones play to confirm. Car Select Car 2 must first be turned On (See Remote Features menu under “Pro- gramming” on page 45 to turn on). Press and hold the button for 3 seconds. The remote flashes the LED and beeps once or twice to indicate the selected Car is 1 or 2, release the button for Car Select or continue to hold for programming. Release the button, then press and release while the LED and beeps continue to perform Car Select. Once the car is selected a com- mand can be performed by pressing one of the command buttons.

1-Way 45 Programming To enter; hold the button for 8 seconds, the remote emits one long beep and turns the LED on, the programming main menu has been accessed. To exit; press and release the button to go back and repeat to exit. 1 short and 1 long beep is emitted for each step back, the LED turns off when programming is exited. Sensor Adjust The button is used for sensor adjustment, to avoid unintended alarm triggers, it is recommenced that an authorized Directed dealer perform all sensor adjustments. Remote Features menu Press and release the button, 2 LED flashes and beeps indi- cate the remote features menu is accessed and can be set. Press buttons indicated below, 1beep and flash turns the feature on, 2 beeps and flashes turns the feature off. sAutolock feature: Press to turn on/off. sRemote Beeps: Press to turn on/off. sCar 2 feature: Press to turn on/off. Remote Learning Press the button,3 LED flashes and beeps indicates the remote is ready to program to the system. Per the instruction in “Pair Remote:” on page 28 under the Main Menu section of this guide, following step 4 of Prepare the vehicle system to be Paired with a new remote. Press and hold the button, the siren emits one long chirp to confirm the remote has been learned.

46 Battery Information (1-Way) The 1way companion remote is powered by one 3V coin cell lithium battery (PN CR-2032) that will last approximately one year under normal use. Battery Replacement Battery Cover Battery Clip Rear View + 1 2 1. Slide the battery cover up by ap- plying equal pressure at its top and bottom (the arrow on the cover indi- cates the direction), remove the cover from the remote control housing. 2. Gently pry up on the battery to re- move it from the holder. Insert a new battery into the holder and under the clip with the positive (+) side up. Replace the battery cover. The re- mote control is now ready for use.

System Expansion Options Controlling two vehicles (Car Select) The Responder LC and 1way companion remote can control systems in two different vehicles saving the need for multiple remote controls. This feature also allows for customized system configurations on each vehicle that has more than one driver. See Owner Recognition follow- ing for details. Owner recognition The system can be configured to recognize the remote used when disarming and change selected features to match the remote users preferences. Memory seat adjustment, siren chirps, passive arming, remote button auto unlocking, alarm output duration can all be custom set for each remote user at the time of installation. Comfort closure Comfort Closure emulates turning the key in the door cylinder or hold- ing the lock button of an OEM keyless entry. It will automatically close the windows and sunroof on vehicles with this type of OEM conve- nience feature. Alarm output duration The length of time the siren sounds can be adjusted from 1 to 180 seconds at the time of installation. Arming and Warn-away chirp control The system Arm, Disarm and Sensor Warn-away chirps can be config- ured for those that prefer a custom silent alarm operation.

Driver door priority unlocking The door unlocking operation can be configured to emulate an OEM style of driver priority unlocking for added security during disarming. Auxiliary Channels The Auxiliary Channel outputs of this system can activate many of the convenience features found in today’s vehicles. Once a command is performed to activate a convenience feature the Responder LC dis- plays text that matches the feature. The system installer can clarify if any of the below listed features are compatible with your vehicle. sTrunk release sWidows open/close sLeft Sliding door open/close sRight Sliding door open/close sRear Hatch open/close sSunroof open/close sAudio system sHeadlights

Battery 49 Battery Information (Responder LC) The Responder LC remote control is powered by an internal recharge- able battery that can be serviced only through an authorized Directed Electronics dealer. The information and precautions in this section can help maximize your battery’s life and usage in providing your Re- sponder LC remote control with many years of trouble free operation. The battery information for the 1way companion remote control can be found in the 1-way Companion Remote Control section of this manual. Warnings! NEVER connect the supplied AC adapter to products other than the Responder LC remote con- trol. It is a high current device designed specifically for rapid charging of the Responder LC battery and may cause severe damage or explosion when connected to any other products. Charging the battery when the temperature is below 32°F (0°C) or above 113°F (45°C) may cause severe battery damage and/or reduce battery life. Avoid placing the remote control in areas exposed to ex- treme cold or heat (direct sunlight) when charging the battery. Low Battery After a command is performed the Responder LC and 1way com- panion remote controls check their battery level and, when the level requires attention, will begin generating alerts. Once the alerts begin they will continue to command the system for several days but should

50 be charged at the earliest opportunity or failure to control the system may occur. Low Battery Alerts When disarming the system using a remote with a low battery the siren will emit one additional chirp as an alert. If confirmation chirps are programmed off, the system will still emit one chirp as an alert when disarming. After performing a command, LOWBAT and several beeps play on the Responder LC remote to indicate the battery needs to be charged. Important To preserve power at critically low battery levels the Responder LC turns the pager off and stops receiving messages from the system. It will continue to command the system until the battery can be charged. Battery Life The Responder LC remote control has many features that make it one of the most unique remote controls on the market today, including su- perior long range communication with the system. The default feature settings provide for excellent battery charge duration. However, to maximize this duration between charges, the following suggestions will help: sTurn the remote Off: When not in use and/or out of range of the vehicle the remote can be turned off in the Main menu. sTurn Paging off: The remote will not wake up to check for mes- sages with Paging off in the Setup Remote menu. Caution! The remote will not receive trigger messages from the system. sTurn Beeps off: The Button beeps can be turned off in the Setup Remote menu. The command beeps still play normally.

Battery 51 Battery Disposal Directed Electronics cares about the environment. If you need to dispose of the battery, please do so in accordance with your municipal requirements for battery disposal.

Glossary of Terms Document Terminology Control Module The “brain” of your system. Usually hidden underneath the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the system’s func- tions. Responder LC (2-way Remote Control) A hand-held, remote control which operates the various func- tions of your system and receives messages and pages from the system. Companion Remote (1-way Remote Con- trol) A hand-held, remote control which operates the various func- tions of your system but does not provide message display.. Control Center The control center contains the system’s radio-frequency an- tenna, the control button, and the Status LED. For maximum remote-control range, the control center is usually located at the top of the windshield, centered near the rear-view mirror. Status LED A light used to indicate the status of your system. It is located on your system’s Control Center. Control Button A small push button located on your system’s control center. It is used to override (disarm) the alarm when a remote is not available or to enter or exit Valet Mode.

Patent Information This product is covered by one or more of the following United States patents: Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053; 7,483,783 Vehicle Security Patents: 5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591; 5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484 Other patents pending.

Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency en- ergy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: s2EORIENTORRELOCATETHERECEIVINGANTENNA s)NCREASETHESEPARATIONBETWEENTHEEQUIPMENTANDRECEIVER s#ONNECTTHEEQUIPMENTINTOANOUTLETONACIRCUITDIFFERENTFROMTHATTOWHICHthe receiver is connected. s#ONSULTTHEDEALERORANEXPERIENCEDRADIO46TECHNICIANFORHELP Remote Controls To satisfy FCC RF exposure compliance requirements, this device should be used in hand-held, hand operated configurations only. The device and its an- tenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This device is designed to be used in a person’s hands and its operating configu- rations do not support normal transmissions while it is carried in pockets or holsters next to a person’s body.

Safety 55 Control Center To satisfy FCC RF exposure compliance requirements, the device and its an- tenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This device complies with the Industry Canada Radio Standards Specification RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device. WARNING! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this de- vice.

56 Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600. Remote Start Capable When properly installed, this system can start the vehicle via a command signal from the remote control transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed menu wheel. It is the user’s sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle. THE USER MUST IN- STALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIV- ING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STOR- AGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user. Manual Transmission Vehicles Remote starters on manual transmission vehicles operate differently than those with automatic transmission because you must leave your car in neutral. You must read this Owner’s Guide to familiarize yourself with the proper procedures regarding manual transmission remote starters. If you have any questions, ask your authorized Directed dealer or contact Directed at 1-800-753-0600.

Safety 57 Before remote starting a manual transmission vehicle, be sure to: sLeave the vehicle in neutral and be sure no one is standing in front or behind the vehicle. sOnly remote start on a flat surface sHave the parking brake fully engaged WARNING! It is the responsibility of the owner to ensure the parking/emer- gency brake properly functions. Failure to do so can result in personal injury or property damage. We recommend the owner have the parking / emergency brake system inspected and adjusted by a qualified automotive shop biannu- ally. Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or death. (1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also have the neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation guide. If the vehicle starts in gear, cease remote start operation im- mediately and consult with the authorized Directed dealer to fix the problem. After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by an authorized Directed dealer. OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN

GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPER- ATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMME- DIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this guide. This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission. Installation in such vehicles may pose certain risk. Interference All radio devices are subject to interference which could affect proper performance. Upgrades and Batteries Any upgrades to this product and/or installation of batteries must be performed by an authorized dealer. Do not attempt to perform any unauthorized modifications to this product. Water/Heat Resistance This product is not designed to be water and/or heat-resistant. Please take care to keep this product dry and away from heat sources. Any damage from water or heat will void the warranty.

Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’s election) with a comparable reconditioned model any Directed unit (hereaf- ter the “unit”), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be profession¬ally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer’s name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All com- ponents other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED. This warranty is non-transferable and is automatically void if: the unit’s date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to the unit caused by installation or removal of the unit. Directed, in its sole discretion, will determine what con- stitutes excessive damage and may refuse the return of any unit with excessive damage. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR

ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. This warranty is only valid for sale of product(s) within the United States of America and in Canada. Product(s) sold outside of the United States of America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. For further details relating to warranty information of Directed products, please visit the support section of Directed’s website at: www.directed.com This product may be covered by a Guaranteed Protection Plan (“GPP”). See your authorized Directed dealer for details of the plan or call Directed Customer Service at 1-800-876-0800. 920-10011-01 2011-06

Security and Remote Start Responder LC3 Wiring Connections Main Harness, 6-pin connector MJ/1 . REO '\lft/2 BLACK ,d l_l/) BROWN (+)12VDC CONSTANT INPU :_T _________ -j (-) CHASSIS GROUND (+)SIREN OUTPUT ~r~4-t;f. WHITE/ BROWN PARKING UGHT ISOLATION WI RE - PIN 87a of onboard relay ~~~ ·· ~ ~~~ ··i+-W_HI_TE __ ~~P_AR_K_ IN_G_U_GH_T_O_UT_P_ UT _____ __ ... ________ JiJ.tl~;ffl; ORANGE (-) 500mA GROUND WHEN ARMED OUTPUT C2012Directed.AIIrightsRe5eNed. (-) 500mA UNLOCK OUTPUT NOT USED H 500mA LOCK OUTPUT Remote Start 10-pin Harness Guide Translations For a Spanish or French version of the Installation Guide, please download it from www.directechs.com under NResources" Traducci6n de los manuoles Para obtener una versiOn en Espafiol o Frances del Manual de lnstolociOn, desc6r· guela de WVV\o'.J.directechs.com bajo el titulo "Recursos" ("Resources"). Traduction du guide: Pour une version franyaise ou espagnole du guide d'instollation, veuillez le re- l&harger 0 \111\fv'W.directechs.com sous «Resources• .. Bitwriter/SmartStart Port Required connection for manual transmission vehicles. Ground this wire for automatic transmission vehicles or connect to the park- ing broke wire for manual transmission vehicles Important: NEVER connect 200mA low current outputs diredy to a motor or high current device WITHOUT a relay Installation Points Adjusting the Sensor Adjusting the sensor: Important! Make sure the vehicle is disarmed. The shock sensor sensitivity can be ad justed by using a trimmer tool to turn the potentiometer Adjusting the sensor: 1 Disarm the system, turn the ign ition Off 2. With the sensor mounted in its permanent location, locale the trim pot on the shock sensor module and using a trimmer tool Turn the potentiometer clockwise for increased sensitivity or Turn it counterclockwise for decreased sensitivity Note: You can rest the new setting by cautiously impacting the vehicle with increas- ing intensity while noting the LED status on the shock sensor. The LED turns on for a short duration for small impacts before turning off [indicating a warn-away trigger) The impoct level required to fully trigger the alarm is indicated when the LED remains on for a longer duration before turning off. To learn the tach signal: 1 Start the vehicle with the key. 2. Within 5 seconds, press and hold Stotu5 LED - Control OOtton the Control button After 3 seconds the status l ED on your Control Center lights constant when the tach signal is learned 4. Release the Control button. Important This unit con learn the tachometer w ith the analog input or through d2d using an interface module. The unit confirms which source is used by flashing the parking lights. When programming tach learning w ith: Analog, the parking lights flash one time. D2D interface module, the parking lights flash twice If the tachometer input on the system is connected to the vehicle, the d2d tachometer input is ignored lnitiollzing_llirtual Tach (not needed with hardwire...tach_inp.utsL To program Virtual Tach: 1. After the install is complete, remote start the engine. The programming op- eration may require 3 cranks of the starter before the engine starts and runs. Do not turn off the remote start if this happens, it is a normal programming operation. 2. Once the engine begins running, let it run for at least 30 seconds. 3 Using the Remote, send the Remote start command to turn remote start off. Virtual Tach is programmed To reset Virtual Tach, go into the Remote Pairing section of this guide and press/re- lease the Control button 4 times for step #4, then press and hold the Control button to reset Virtual Tach. Virtual Tach cannot be reset w ith the Bitwriter. Note: Virtual Tach cannot be used in MTS Manual Transmission M ode. It is also not recommended for diesel trucks Virtual Tach handles disengaging the starter motor during remote starting - it does ·not address over-rev. If the customer wants to have the over-rev protection capability, the tach wire must be connected Important: After successfully learning Virtual Tach, a small minority of ve hide starters may over crank or under crank during remote start. The Bit- writer can be used fine tune the starter output time in 50 ms increments to compensate for such on occurrence. Remate..start.Shutdo.wn/Startup Diagnostics To perform shutdown diagnostics: 1. With the ignition Off, press and hold the Control button [on Control Cente 2 Turn the ignition On and then back Off while holding the Control button 3. Release the Control button. 4. Press and release the Control button . The status LED flashes to report the la shutdown for one minute or until the ignition is turned on, as shown in the following table: Status LED Flashes l llash 2 1lashes J llashes Shutdown Mode Runtime expired Over-rev shutdown Low or no RPM 4llashes 5 1lashes Transmitter shutdown (or optional push button) [+I Broke shutdown 6 1lashes H Hood shuldown 71lashes 8 flashes Timer mode/Turbo mode/Manual mode error * Neutral safety shutdown 9flashes Low battery [voltage mode) 10 llashes Alarm triggered * * I I llashes Wolt·lo-start input timed out Timer mode error: Ignition is on or shutdown input is active when activat timer mode. Turbo mode error: Turbo mode is programmed off, engine is not on or s down input is active. r'v\onuol mode error: MTS mode not enabled Alarm was triggered during remote start sequence. Startup Diagnostics: If the vehicle fails to activate the remote start, the remote s module will noli ~ you via your Responder LC3 remote control and will flash the pa ing lights on the vehicle to notify you of what caused the no-start situation Parking light Flashes 5 flashes Broke wire is active 6 flashes Hood pin wire is active 7 flashes Manual transmission mode is enabled and not initialized 8 flashes N eutral safety wire has no ground or the neutral safety switch is Off longJeun Event History The system stores the last two full triggers in memory. These are not erasable. E time the unit sees a full trigger, the older of the two triggers in memory is replaced the new trigger. To access long term event history: W ith the ignition Off, press and hold the Control button (on Control Center Turn the ignition On Release the Control button. 4. W ithin 5 seconds, press and release the Control button . The status lED flas in groups indicating the lost two zones that triggered the unit for l minute until the ignition is turned off. Refer to table of zones [overleaf on page 21 Note: The Warn Away triggers are not stored to memory and is not reported. Bitwriters with a date code of 6a or older require an IC upgrade (p/n 998M). Some biiiNriters with o date code of 6B do not require the IC upgrade, refer to tech tip # 11 12 lor more information. '· ______ _..... .• OATA TO OATA ... The BiiiNriter® (p/n 998U requires chip version 2.7 o newer to program this unit. See full Installation G uide for more detailed information on this system. D I R E CTE De Such information and more can be found online at www.directechs.com

access and change most of the feature settings using the Control button. Open a door Turn the ignition on, then off Select a Menu. Press and hold the Control button_ The number of siren chirps indicates the menu number. 1 chirp indicates menu 1, 2 ch irps · menu 2 and 3 chirps for menu 3. 4 When the desired menu chirps are heard, release the Control button 5. Select a Feature. Press and release the Control button the number of times corresponding to the feature you wish to change. Then press and hold one more time to select the features. 6 Program rhe Feature. While holding the Control button, you can program the feature using the remote control . For features with only tvvo options; Q =option 1 w hile • =option 2. For features with more than tvvo options; Q selects the options in ascending order, while • selects them in descending order. Note: Pressing {:) button resets the feature to the factory default. Once o feature is programmed: Other features can be programmed within the same menu Another menu can be selected The learn routine con be exited if programming is complete To access another feature in the some menu: 1. Press and release the Control button the number of times necessary to advance from the feature you just programmed to the next one you wont to program. 2. Then press the Control button once more and hold it To select another menu: 1 Press and hold the Control button. 2. Aher 3 seconds, the unit advances to the next menu and the siren chirps, indi· eating which menu has been accessed The learn routine exits if any of the following occurs: The open door is closed The ignition is turned On There is no activity lor 30 seconds The Control button is pressed too many times Bitwriler- Oni¥Jlptions _________ _ H If progro m.ming wit.h the Bitwriter®, the learn rout.ine ca n be locked or un- locked. If the learn routine has previously been locked, it must be unlocked w ith Bitvvnter® ·thts cannot be done manually w tth the Control button. The Bitvvriter® 11!1 gives you access to o wider ra nge of system options. These features and the adjustments that may be programmed are described in the ta ble below. Default settings a re in bold C 2012Directed.A I Irig~1sReserved. * Only ava ilable on remote controls w ith display screens Feature Menus Default settings a re in bold type. New features are bold w ith grey background Menu 2 - Convenience Menu 3 - Remote stort Remote !airing ______ _ Prepare the vehicle system to be Paired with a new remote 1. Open a door. 2. Turn the key to the ON position 3. W ith in 5 seconds press and release the Control button on the system's Contr Center one time. W ithin 5 seconds, press and hold the Control button on the Control Cente The status LED w ill flash one lime and the siren w ill chirp once to confirm th system is ready for remote pairing. Release the Control button and proceed below. Note: If no remote pairing results, the system will exit aher 60 seconds. Prepare the new remote to be Paired with the system Make sure the LC3 remote is set for the desired Car 1 (Default) or Cor 2 oper lion. 1. Press and hold the f button for 8 seconds until the main menu appears. 2 Press and release the {:) button until L.!k.".l9.~ful!J text is displayed. 3 Press and release the f button until [P".....Qlr:J text is displayed 4. Press and hold the Q button until tones ore played on the LC3 remote. 5. Successful or Failed Pair: The LC3 remote control indicates a successful fo iled pairing on the display Note: Please see installation guide for pairing with the hvoy companion remote. Note: See Owner's guide for more details Iahle_of.Zones. _____ _ A zone is represented by the number of status LED flashes used by th system to identify a particular type of input. 1~ ',~:-~~- 2~::.:~t~:JZ:,tit~::;.;;~~~._ Trunk Pin 24 pin ~arness Blue wire Instant trigger a heavier impact Shock sensor. detected by the shock sensor Door switch trigger Instant trigger: For optional sensors Ignition trigger Hood Pin Optionol MUX porl 10 pin Harness Pink wire __ 24 pin Harness Grey wire: LAD570

If vehicle battery is disconnected, the system may attempt to start when the b.attery is reconnected or transmitte is used. Press brake to disengage. Check with vehicle owner to determine if hood pin switch or override switc was installed to disengage the system for service. IMPORTANT SAFETY NOTICE

correspondence to: Directed 1 Viper Way Vista, CA 92081 XFR01-01 DIRECTED® PO BOX 174391 DENVER CO 80217-4391 . First~ Class Postage · Requir~ Post Office wiU not deliver · without .·proper · postage. 11 .. 1.11 ••••• 1.1 ... 111 ... 1.1 .. 1 .. 11.1.1 ••••• 111.1 ..... 11.1.1.1 ~~-~- !:"'--:" .~~-~- ~- ~ - ~ - .--------- ~ ~~ ---~--- -- ~~ --~- - ------ - -~~ ~-. "'! ""!.~-- -:!!!.. .... ~-- ~ ... .., -,_,_,.,._._.!",--,.-----------.---------- ·------- ----- ---~-------------------------------------------- DIRECTED® PRODUCT REGISTRATION Prefect rbur lnves,., Register your product now to receive these benefits: ~ Owner Verification .......__ Proof of purchase in case of product theft or loss ~ Efficient Warranty Service In case there is a problem with your product Or register online at www.prodregister.com/directed

Please complete and return within the next 10 days ® or register online at productregister.com/directed. 1. 1. 0 Mr. 2. 0 Mrs. 3. 0 Ms. First Name Street City E-mail address 2. Your date of birth: I Month 3. Marital status: 01. 0 Married 4. Date of purchase: I Month 5. Model number: 6. Name of store where purchased: 7. Price paid: (excluding tax) Year 02. I Day 8. Which Directed brand did you purchase? 01. 0 Autostart 04. 0 Python 02. 0 Avital 05 0 Vyper 03. 0 Clifford 06 0 Other 9. What type of product did you purchase? 01. 0 Security system 02. 0 Security system with remote start 03. 0 Remote start system 04. 0 Keyless entry system 1 0. In what vehicle will this product be used? Initial 0 Single Year 01. 0 Car 04. 0 Van 07. 0 Boat 02. 0 Truck 05. 0 Minivan 08. 0 Motorhome 03. 0 SUV 06. 0 Motorcycle 09. 0 Other Make of vehicle: Model name: YIN: XFRO 1 4. 0 Miss State/Province 11. How did you first become aware of this product? (check one) 01. 0 Local newspaper 07. 0 Radio commercial 02. 0 Yellow pages 08. 0 Salesperson's 03. 0 Magazine Ad recommendation 04. 0 TV commercial 09. 0 Motorsports 05. 0 Magazine article/ sponsorship review 10. 0 Internet 06. 0 Friend/Relative's 11. 0 Other recommendation 12. What factors most influenced the purchase? (check up to three) 01. 0 Directed's reputation 09. 0 Rebate/Promotion 02. 0 Experience with 1 0. 0 Style/Design/Color Directed products 11. 0 Dealer proximity 03. 0 Experience with dealer 12. 0 Friend's 04. 0 Value/Price recommendation 05. 0 Special features 13. 0 Salesperson 06. 0 Warranty recommendation 07. 0 Quality/Durability 14. 0 Compatibility w/vehicle 08. 0 Display in-store demo 15. 0 Other 13. What benefits most influenced your decision to purchase this product? (check up to three) 01. 0 Improved security 11. 0 Warranty 02. 0 Improved convenience 12. 0 PriceNalue 03. 0 Improved performance 13. 0 Rebate/Promotion 04. 0 Compatibility w/vehicle 14. 0 Immediate 05. 0 Ease of installation availability 06. 0 Style/Design/Color 15. 0 Friend/Family's 07. 0 Special features recommendation 08. 0 Quality /Durabi I ity 16. 0 Salesperson's 09. 0 Increase vehicle value recommendation 10. 0 Functionality 17. 0 Dealer proximity 14. What other brands did you seriously consider before making this purchase? 01. 0 No other brands considered 02. 0 Other Directed brands 03. 0 Code Alarm 04. 0 Audiovox 05. 0 Auto Page 06. 0 07. 0 08. 0 09. 0 10. 0 Compustar Prestige Pursuit Crime Stopper Bulldog 01. 0 Boughtnew 03. 0 Leased new Year: 02. 0 Bought used 04. 0 Leased used Failure to return this form will not change your warranty rights. Copyright 0 2012 All Rights Reserved - Please seal with tape. Do not staple. 540-0070 (B) LRDEI007