Viper 4105V Owner's Manual

and remote start system. Reading this Owner's Guide prior to using your system will help maximize the use of your system and its many features. Please visit: www.viper.com - For general and additional guide information. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600 (U.S. only). Additional support is also available at: http:// support. directed.com. What's included Welcome to the best generation of security. Your system contains ev- erything you need. • Two 4- button remote controls (P /N 7145V) • Owner's guide and warranty registration cord Your warranty Your system comes with a warranty. Make sure you receive the war- ranty registration cord and proof of purchase from your dealer indicat- ing the product was installed by on authorized Directed dealer. Please validate it online at www.prodregister.com/directed or complete and return the warranty registration cord. © 2012 Directed. All rights reserved.

II © 2012 Directed. All rights reserved.

What's included ............................................................................................. ! Your warranty ............................................................................................ i I t t . f t• .. mpor an 1n orma 1on ........................................................................................ 11 Government Regulations and Safety information .......................................... ii Remote Control ................................................................................................. 3 Remote control functions ..................................................................................... 4 Standard configuration .............................................................................. 4 Using the system ............................................................................................. 6 Locking .................................................................................................... 6 Unlocking ................................................................................................ 6 Disabling (optional) Starter Kill .................................................................. 6 Panic Mode ............................................................................................. 7 Remote Start ............................................................................................. 7 Valet Take-Over ........................................................................................ 9 Car Finder ............................................................................................... 9 Battery Information .......................................................................................... 1 0 Battery replacement ................................................................................ 1 0 Battery Disposal ..................................................................................... 1 0 Patent Information ........................................................................................... 1 0 Government Regulations .................................................................................. 11 Warning! Safety first ....................................................................................... 12 Caution ................................................................................................. 13 Limited lifetime consumer warranty .................................................................... 14

remote start commands © 2012 Directed. All rights reserved. 3

The remote buttons are used to send commands to the system. The but- tons indicated below are for standard configuration. Standard configuration ~ Button The lock function is controlled by pressing ~ on the remote control for one second. When held for approximately two seconds, Panic is activated. 3 Button The unlocking function is controlled by pressing 3 on the remote con- trol for one second. You can also turn Panic off with this button. £(Wb.{ Button Silent Mode™ and an optional auxiliary function are controlled by pressing £(Wb.{. Silent Mode works by pressing £(Wb.{ for less than one second before locking or unlocking. An optional auxiliary function such as trunk release may be controlled by pressing and holding £(Wb.{ for approximately two seconds. * Button The remote start function of your system is controlled by pressing this button for one second. * and £~ Buttons Car Finder is controlled by pressing these two buttons. 4 © 2012 Directed. All rights reserved.

and £~ Buttons When simultaneously pressed these buttons control the optional rear window defogger during remote starting. The parking lights flash three times to confirm activation. Once activated the defogger will turn on whenever the vehicle is remote started. The parking lights flash twice when the defogger is deactivated. The defogger does not turn on when the vehicle is remote started. Important note: Defogger is an optional feature. Additional parts and labor may be required. See your Directed dealer for details. ~ and 8 Buttons Timer mode is activated when these buttons are pressed simultaneously. When you activate timer mode the parking lights flash four times, after a 1-second delay the engine starts. To turn the engine off, without exiting timer mode press the*. The system remains in timer mode and will start every 3 hours for a maximum of 6 starts unless cancelled by turning on the ignition, or by activating the brake or neutral safety shutdown wires. The parking lights flash 4 times indicating timer mode is exited. © 2012 Directed. All rights reserved. 5

Locking Pressing ~ for one second locks the system (if the door locks are con- nected}. The horn honks and the parking lights flash once to confirm the system is locked. The Failsafe® Starter Kill also activates and prevents the vehicle's starter from cranking . Important note: Horn honk and Failsafe are both optional features. Unlocking Pressing 8 for one second unlocks the doors (if connected). The horn honks twice and the parking lights flash twice to confirm unlocking of the system. The Failsafe Starter Kill is deactivated . Disabling (optional) Starter Kill If your remote control is lost or damaged, you can manually override the starter kill. To do this, you must have the vehiclels ignition key and know where the Valet button is located. Be sure to check with the in- staller for the location of the Valet button. To override the starter kill, turn the ignition on and press and release the valet button within l 0 seconds. The vehicle should start. If it does not start, you may have waited too long; turn the ignition off and repeat the process. Location of Valet button: ---------------- 6 © 2012 Directed. All rights reserved.

tion by triggering the system with your remote control. Press {5 for approximately two seconds to enter Panic Mode. In Panic Mode, the horn will honk and the parking li~ts will flash for 30 seconds. To stop Panic Mode at any time, press (5, or {5 on the remote control. Note: In order for Panic Mode to be effective, the vehicle's horn (or optional siren) and the vehicle's parking lights must be connected. Remote Start This feature allows you to remotely start and run your vehicle for a programmable period of time. This makes it possible to warm up the engine, and adjust the interior temperature of the vehicle with the cli- mate control system. If interior heating or cooling is desired, the climate controls must be preset, and the fan blower must be set to the desired level prior to remote starting the vehicle. Warning I ( 1) Never remote start your vehicle when the keys are in the ignition, except when performing Valet Take-Over, and (2) Never start the vehicle if it is not in PARK or NEUTRAL To remote start the vehicle: • Press the * button on the remote control for 1 second. • The parking lights flash to confirm that the vehicle is attempting to start. In gasoline vehicles the engine will start 4 seconds after the parking lights flash, in diesel vehicles the engine starts after the WAIT-TO-START timer has expired. • Once the vehicle has started, it will run for the pre-programmed period of time ( 1 2, 24, or 60 minutes) or until a shutdown input © 2012 Directed. All rights reserved. 7

a garage or other closed off area. Breathing the ex- haust from the vehicle is hazardous to your health. Never activate the remote start in an enclosed space. When you are ready to drive the vehicle: l . Insert the ignition key and turn it to the ON (not the START) position. 2. Press the brake pedal. The remote start system shuts down and the engine continues to run because the ignition has been turned on. Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. While the vehicle is running during remote start operation, the system monitors the vehicle and automatically shuts down the engine if it receives any of the following shut-down inputs: • The brake pedal is pressed. • The hood is opened. • The shutdown toggle switch is put into the OFF position. • The pre-programmed run time ( 12, 24, or 60 minutes) has elapsed. • Remote control button {:}is pressed once. 8 © 2012 Directed. All rights reserved.

the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the engine running and the climate controls on. To perform Valet Take-Over: 1 . Before turning off the engine, press and release * on the remote control for 1 second. 2. Turn the ignition key to the OFF position. The engine will stay run- ning until the pre-programmed time has elapsed or a shutdown input is received. (See the previous Remote Start section for a complete list of shut-down inputs.) Important: This feature will not work if the brake pedal 1s being pressed . Cor Finder Car finder allows you to locate your vehicle, by having the system flash the parking lights. To activate: 1 . Press and release the * and ~Mb.\ buttons at the same time. 2. The lights flash 5 times slowly allowing you to locate your ve- hicle.

the battery begins to weaken, operating range is reduced and the LED on the remote control dims. BoHery replacement Locate the small slot on the side of the remote control. Insert a small slotted screwdriver or equivalent tool into slot and pry the case apart. Replace battery, while verifying the correct polarity and then snap case back together. BoHery Disposal Directed cares about the environment. If you need to dispose of the battery, please do so in accordance with your munici- pal requirements for battery disposal. Potent Information This product is covered by one or more of the following United States patents: Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561, 151; 7, 191,053; 7,483,783 Vehicle Security Patents: 5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591; 5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484 Other patents pending 10 © 2012 Directed. All rights reserved.

lowing two conditions: ( 1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal- lation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. This device complies with the Industry Canada Radio Standards Specification RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harm- ful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device. Warning: Changes or modifications not expressly approved by the party responsible for . compliance could void the user's authority to operate this device. © 2012 Directed. All rights reserved. 1 1

Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed toggle switch. It is the user's sole responsibility to properly handle and keep out of reach from chil- dren all remote control devices to assure that the system does not unintentionally remote start the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user. Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or death. ( 1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also have the neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation guide. If the vehicle starts in gear, cease remote start operation immediately and consult with the authorized Directed dealer to fix the problem. After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing 12 © 2012 Directed. All rights reserved.

properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by an authorized Directed dealer. OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERAT- ING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AU- THORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. Caution This product is designed for fuel injected, automatic transmission ve- hicles only. Use of this product in a standard transmission vehicle is dangerous and contrary to the product's intended use. © 2012 Directed. All rights reserved. 13

Directed Electronics. ("Directed") promises to the original purchaser to repair or replace (at Directed's election) with a comparable reconditioned model any Directed unit (hereafter the "unit"), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reason- able use during the lifetime of the vehicle provided the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer's name, telephone number and address; the authorized dealers name, telephone numb~r and address; com- plete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All components other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED. This warranty is non- transferable and is automatically void if: the unit's date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to the unit caused by installation or removal of the unit. Directed, in its sole discretion, will determine what constitutes excessive damage and may refuse the return of any unit with excessive damage. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON- INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND. 14 © 2012 Directed. All rights reserved.

THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER'S PURCHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION. Some states do not allow limitations on how long an implied warranty will last or the exclu- sion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. This warranty is only valid for sale of product(s) within the United States of America and in Canada. Product(s) sold outside of the United States of America or Canada are sold "AS-IS" and shall have NO WARRANTY, express or implied. For further details relating to warranty information of Directed products, please visit the support section of Directed's website at: www.directed.com This product may be covered by a Guaranteed Protection Plan ("GPP"). See your authorized Directed dealer for details of the plan or call Directed Customer Service at 1-800-876-0800. 920-1 00 1 1-0 1 20 l 1-06 © 2012 Directed. All rights reserved. 15

Vista, CA 92081 www. viper. com The company behind Viper® Auto Security Systems is Directed. Since its inception, Directed has had one purpose, to provide consumers with the fin- est vehicle security and accessories avail- able. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Quality Directed products are sold and ser- viced throughout North America and around the world. Call ( 800) 876-0800 for more information about our products and services. ORG41 05VML 2012-09

1 Quick Reference Install Guide Remote Start with Keyless Entry Model 4105 Control Button (Valet Switch) Door Lock/unlock Harness End View Antenna Antenna LED (Programming indicator) Parking light jumpers Primary Harness Remote Start Harness Heavy Gauge Relay End View Side View Side View Top View Satellite Harness D2D ESP Wiring Connections Main Harness, 9-pin connector 1 LIGHT GREEN BLACK (-) 200mA FACTORY ALARM DISARM 2 GREEN/WHITE (-) 200mA FACTORY ALARM REARM 3 YELLOW (+) IGNITION OUT (TO ALARM) 4 WHITE/BLUE (-) ACTIVATION INPUT 5 ORANGE (-) 500mA GROUND WHEN LOCKED/ANTI-GRIND OUTPUT 6 BROWN (-) 200mA HORN OUTPUT 7 RED/WHITE (-) 200mA TRUNK RELEASE OUTPUT 8 BLACK GROUND 9 WHITE (+/-) LIGHT FLASH OUTPUT Door Lock, 3-pin connector 1 BLUE (-) UNLOCK 2 EMPTY NOT USED 3 GREEN (-) LOCK Remote start, 6-pin connector 1 RED (+) (30A) HIGH CURRENT 12V INPUT 2 PINK/WHITE OUTPUT TO SECOND IGNITION/ACCESSORY CIRCUIT 3 RED (+) (30A) HIGH CURRENT 12V INPUT 4 ORANGE OUTPUT TO ACCESSORY CIRCUIT 5 PURPLE OUTPUT TO STARTER CIRCUIT 6 PINK OUTPUT TO PRIMARY IGNITION CIRCUIT Satellite harness, 4-pin connector 1 BLUE (-) 200mA STATUS OUTPUT 2 ORANGE (-) 200mA ACCESSORY OUTPUT 3 PURPLE (-) 200mA STARTER OUTPUT 4 PINK (-) 200mA IGNITION OUTPUT Remote Start harness, 5-pin connector 1 BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUT 2 VIOLET/WHITE TACHOMETER INPUT WIRE 3 BROWN (+) BRAKE SHUTDOWN INPUT WIRE 4 GRAY (-) HOOD PIN SWITCH SHUTDOWN WIRE 5 BLUE/WHITE (-) 200 mA 2ND STATUS/REAR DEFOGGER Important: NEVER connect a 200mA low current output directly to a motor or high current device WITHOUT a relay. Installation Points Tach Learning To learn the tach signal: 1. Start the vehicle with the key. 2. Within 5 seconds, press and hold the Valet button. 3. After 3 seconds the LED will light constant when the tach signal is learned. 4. Release the Valet button. Important: This unit can learn the tachometer with the analog input or through d2d using an interface module. The unit confirms which source is used by flashing the parking lights. When programming tach learning with: sAnalog, the parking lights flash one time. sD2D interface module, the parking lights flash twice. If the tachometer input on the system is connected to the vehicle, the d2d tachometer input is ignored. Virtual Tach Note: Virtual tach is not recommended for diesel vehicles To program Virtual Tach: 1. After the install is complete, remote start the car. 2. If the car does not start on the first attempt, let the remote start attempt again. 3. Once the car starts, let it run until the parking lights come on. 4. When the parking lights come on, shut off the remote start with the remote - that’s it! Virtual Tach is programmed. Virtual Tach handles disengaging the starter motor during remote starting – it does not address over-rev. If the customer wants to have the over-rev protection capabil- ity, the tach wire must be connected. This may involve more installation shop charges than initially quoted. Important: If the Virtual Tach mode over cranks or doesn't crank the vehicle long enough to start and run the car, use the Bitwriter to add or subtract the starter output time. You can adjust the output time in incre- ments of 50msec of the learned time using the Bitwriter. Reset and Deletion If a feature/virtual tach needs to be reset or the remote controls need to be deleted, use the following procedure. 1. Turn the ignition to the ON position (The heavy gauge pink wire must be con- nected). 2. Within 10 seconds, press and release the Valet button: 2 times if you want to delete remotes, 3 times to reset features or 4 times to reset virtual tach. These features are described next. Delete remotes: This feature erases all remotes from the memory of the system. This is useful in cases when a customer’s remote is lost or stolen. Note: This does not reset the programmed features of the system or reset the Virtual Tach setting. Reset Features: This resets all features of the system to the factory default settings. Note: This feature does not delete the remotes from the system or reset the Virtual Tach setting Virtual Tach Reset: Deletes all previously learned values for Virtual Tach, and on the next remote start sequence the unit begins virtual tach initial- ization. Note: The “Zap” feature on the Bitwriter does not reset the Virtual tach setting. 3. Once you have selected the function step, press the Valet button once more and hold it. The LED flashes and the horn honks to confirm the selected func- tional step. Do not release the Valet button 4. While holding the Valet button, press the button on the remote control. The horn honks to confirm that the feature has been successfully reset. Once the feature is reset, the Valet button can be released. The routine exits if any of the following occurs: sThe ignition is turned off sThere is no activity for 30 seconds sThe valet button is pressed too many times Remote Start Shutdown Diagnostics Shutdown diagnostics: If the remote start activates but fails to stay running, the re- mote start module has the ability to inform you of what may have caused the remote start failure. Before performing shutdown diagnostics it is important that you let the remote start shut off on its own i.e. let it attempt to start 3 times then shut down, if this is not done the unit will report the shutdown you used to shut off the remote start. Note: Shutdown diagnostics does not report if the vehicles factory immobilizer is causing the problem. To perform shutdown diagnostics: 1. With the ignition Off, press and hold the Valet button. 2. Turn the ignition On and then back Off while holding the Valet button. 3. Release the Valet button. 4. Press and release the Valet button. The LED flashes to report the last shutdown for one minute or until the ignition is turned on, as shown in the following table: LED Flashes Shutdown Mode 1 flash Timed out 2 flashes Over-rev shutdown 3 flashes Low or no RPM, low battery (voltage and virtual tach modes) 4 flashes Transmitter shutdown (or optional push button) 5 flashes (-) Hood Shutdown (5 pin Gray wire) 6 flashes (+) Shutdown (5 pin Brown wire) 7 flashes (-) Neutral safety shutdown (5 pin Black/White wire) 8 flashes Wait-to-start timed out

2 QRN4105DP 2013-06 Programming System Features The System Features Learn Routine dictates how the unit operates. It is possible to access and change most of the feature settings using the Valet button. 1. Turn the ignition on, then off. 2. Select a Menu. Press and hold the Valet button. The number of LED flashes and horn honks indicates the menu number. A single LED flash and honk indicates menu 1. Two LED flashes and 2 honks indicates menu 2. 3. When the desired menu LED flashes and honks are heard, release the Valet button. 4. Select a Feature. Press and release the Valet button the number of times corresponding to the feature you wish to change. Then press and hold one more time to select the feature. The LED flashes and the horn honks to indicate which feature is selected. 5. Program the Feature. While holding the Valet button, you can program the feature using the remote control. For features with only two options; = option 1 while = option 2. For features with more than two options; selects the options in ascending order. The LED flashes and the horn honks indicating which option is selected. Once a feature is programmed: sOther features can be programmed within the same menu sAnother menu can be selected sThe learn routine can be exited if programming is complete To access another feature in the same menu: 1. Press and release the Valet button the number of times necessary to advance from the feature you just pro- grammed to the next one you want to program. 2. Then press the Valet button once more and hold it. To select another menu: 1. Press and hold the Valet button. 2. After 3 seconds, the unit advances to the next menu, the horn honks and LED flashes indicating which menu has been accessed. The learn routine exits if any of the following occurs: sThe ignition is turned On sThere is no activity for 30 seconds sThe Valet button is pressed too many times Bitwriter - Only Options If programming with the Bitwriter®, the learn routine can be locked or unlocked. If the learn routine has previously been locked, it must be unlocked with Bitwriter® - this cannot be done manually with the Valet button. The Bitwriter® gives you access to a wider range of system options. These features and the adjustments that may be programmed are described in the table below. Menu Item Feature Default Options 1 Engine Runtime 12 min. 1-60 min. 2 Diesel start type Off Timed 3 Diesel start delay time (seconds) 15 sec 1-90 sec. 4 Virtual Tach Fine Tune Not initialized 0 to 1 second in 50 mil- lisecond increments 5 Remote control programming Unlocked Locked 6 Feature Programming Unlocked Locked Feature Menus Default settings are in bold type. Menu 1 Feature # Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+ 1 Horn function Off Siren 20 mS Siren 30 mS Siren 40 mS Siren 50 mS 2 Ignition con- trolled lock On Off 3 Ignition con- trolled unlock On Off 4 Doorlock out- put duration 0.8 sec. 3.5 sec. 0.4 sec. 5 Double pulse unlock Off On 6 Double pulse lock Off On 7 Factory Alarm Disarm func- tion with unlock Before unlock Remote start only 8 Factory Alarm Disarm Pulses Single Double 9 Comfort Closure Comfort Closure 1 Off Comfort Closure 2 10 Panic On Off Menu 2 Feature # Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+ 1 Engine check- ing Virtual tach voltage Off tachometer 2 Engine Runtime 12 min 24 min 60 min 3 Park light output Pulsed Constant 4 Cranking time 0.6 sec. 0.8 sec. 1.0 sec. 1.2 sec. 1.4, 1.6, 1.8, 2.0, 4.0 sec 5 Activation pulse count 1 pulse 2 pulses 3 pulses 6 2nd Ignition behavior Ignition Accessory 7 Accessory output Off during wait-to-start On during wait-to-start 8 2nd Status behavior Normal Latch rear defogger Pulse rear defogger 9 Anti-grind On Off 10 Diesel start delay Off Timed 15 sec Timed 30 sec. Timed 45 sec. 11 Timer mode run time 12 min 3 min 6 min 9 min Remote Programming 1. Turn key to the ON position 2. Within 5 seconds, press and release Valet button one time. 3. Within 5 seconds, press and hold the Valet button. The LED will flash one time and the horn honks to confirm entry into remote programming. 4. Press the button on the remote control. 5. The horn honks to confirm the remote has been programmed. 6. Release the Valet button, and turn the key to the Off position. 7. The horn sounds one long honk to confirm that remote programming has been exited. The programming routine exits if any of the following occurs: The ignition is turned off There is no activity for 30 seconds The Valet button is pressed too many times Basic Remote Functions ICON BASIC COMMANDS DESCRIPTION LOCK Pressing for one second locks the system (if the door locks are connected) UNLOCK Pressing for one second unlocks the doors (if connected) REMOTE START Press to remotely start and run the vehicle for a pro gram ma ble period of time or press to turn off if vehicle is already remote started AUX SILENT MODE/AUX- ILIARY FUNCTION Silent Mode works by pressing this button for less than one second before locking or unlocking. This button can also be used for an optional auxiliary function such as trunk release Note: See Owner’s guide for more details Bitwriters with a date code of 6a or older require an IC upgrade (p/n 998M). Some bitwriters with a date code of 6B do not require the IC upgrade, refer to tech tip # 1112 for more information. The Bitwriter® (p/n 998U) requires chip version 2.7 or newer to program this unit. See full Installation Guide for more detailed information on this sys- tem. More can be found online at: www.directechs.com Guide Translations For a Spanish or French version of the Installation Guide, please download it from www.directechs.com under “Resources”. Traducción de los manuales: Para obtener una versión en Español o Francés del Manual de Instalación, descárguela de www.directechs.com bajo el título “Recursos” (“Resources”). Traduction du guide: Pour une version française ou espagnole du guide d’installation, veuillez le té- lécharger à www.directechs.com sous «Resources».

Remote Start with Keyless Entry Model4105 Wiring Connections Remote stort, 6-pin connector OUTPUT TO PRIMARY IGNITION CIRCUIT OUTPUT TO STARTER CIRCUIT OUTPUT TO ACCESSORY CIRCUIT (+) (30A) HIGH CURRENT 12V INPUT OUTPUT TO SECOND IGNITION/ACCESSORY CIRCUIT (+) (30A) HIGH CURRENT 12V INPUT Remote Start harness, 5-pin connector Important: NEVER connect o 200mA low current output diredly to a motor or high current device W ITHOUT a relay. Main harness 9-pin connector Remote start connector i-pin satellite connector Antenna/Receiver Door lock connector Valet button ti~h~fra8;h polarity C 2012 Directed. All rights Reserved. I Red 4-pin 020 Bitwriter port Remote start 6-pin connector 0 Installation Points ~mill~-------------------- To learn the tach signal: I Start the vehicle with the key. 2. Within 5 seconds, press and hold the Valet button. 3. After 3 seconds the LED will light constant when the tach signal is learned 4 Release the Valet button Important: This unit can learn the tachometer with the analog input or through d2d using an interface module. The unit confirms which source is used by flashing the parking lights. When programming tach learning with: Analog, the parking lights flash one time. D2D interface module, the parking lights flash twice. If the tachometer input on the system is connected to the vehicle, the d2d tachometer input is ignored. Virtuol loch Note: Virtual tach is not recommended for diesel vehicles To program Virtual Tach: 1 Aher the install is complete, remote start the car. 2. If the cor does not start on the first attempt, let the remote start attempt again 3. Once the cor starts, let it run until the parking lights come on 4. When the parking lights come on, shut off the remote start with the remote· that's it I Virtual Tach is programmed Virtual Tach handles disengaging the starter motor during remote starting - it does not address over-rev. If the customer wants to have the over-rev protection capabil- ity, the tach wire must be connected. This may involve more installation shop charges than initially quoted. Important: If the Virtual Tach mode over cranks or doesn't crank the vehicle long enough to start and run the cor, use the Bitwriter to odd or subtract the starter output time. You can ad just the output time in incre- ments of 50msec of the learned time using the Bitwriter. Re.d.A:pin port, Bitwriter/ESP2 or 020 programming The Red 4-pin plug may be configured as a Bitwriter/ESP2 or D2D port. The factory default is Bitwriter/ESP2 mode. To use as 020 mode follow the below steps: 1 fv\oke sure White/Blue activation wire is grounded. 2. Power the unit up. The system LED flashes for 5 seconds to confirm D2D mode change 3. Remove the White/Blue wire from ground To chonge from D2D to Bitwriter/ESP2 mode: 1 fv\oke sure the White/Blue activation w ire is grounded. 2. Power the unit up, the system LED turns on solid for 5 seconds to confirm Bit- writer /ESP2 mode change. 3. Remove the White/Blue wire from ground. The procedure con be repeated to toggle from one mode to the other. Important: If you power up the system with the White/Blue activation wire ungrounded, the system LED will come on solid for 5 seconds indi- cating the system is in Bitwriter/ESP2 mode Reset nod Deletion_·----------- If a feature/virtual tach needs to be reset or the remote controls need to be delet use the following procedure. 1. Turn the ignition to the ON position IThe heavy gouge pink wire must be c nected). Within 10 seconds, press and release the Valet button: 2 times if you wan delete remotes, 3 times to reset features or 4 times to reset virtual tach. Th features ore described next Delete remotes: This feature erases all remotes from the memory of system. This is useful in cases when a customer's remote is lost or stole Note: This does not reset the programmed features of the system or re the Virtual Tach setting. Reset Features: This resets all features of the system to the factory def settings. Note: This feature does not delete the remotes from the system or re the Virtual Tach setting Virtual Tach Reset: Deletes all previously learned values for Virtual Ta and on the next remote start sequence the unit begins virtual tach in ization. Note: The ''ZapN feature on the Bitwriter does not reset the Virtual t setting . Once you hove selected the function step, press the Valet button once m and hold it. The LED flashes and the horn honks to confirm the selected fu tional step. Do not release the Valet button 4. While holding the Valet button, press the Q button on the remote control. horn honks to confirm that the feature has been successfully reset. O nce feature is reset, the Valet button can be released. The routine exits if any of the following occurs: The ignition is turned off There is no activity for 30 seconds The valet button is pressed too many times Remote Start ShutdowlllliagmnoUJst .... ics,____ ____________ Shutdown diagnostics: If the remote start activates but fails to stay running, the mote start module has the ability to inform you of what may have caused the rem start failure. Before performing shutdown diagnostics il is important that you let remote start shut off on its own i.e. let it attempt to start 3 times then shut down this is not done the unit will report the shutdown you used to shut off the remote s Note: Shutdown diagnostics does not report if the vehicles factory immobilize causing the problem. To perform shutdown diagnostics: 1. With the ignition Off, press and hold the Valet button. 2 Turn the ignition On and then bock Off while holding the Valet button. 3 Release the Valet button. 4. Press and release the Valet button. The LED flashes to report the last shutdown for one minute or until the ignition is turned on, as shown in the following table: LED Flashes I flash 2 flashes 3 flashes 4 flashes 5 flashes 6 flashes 7flashes 8 flashes Shutdown Mode Timed out Over-rev shutdown Low or no RPM, low battery [voltage and virtual loch mod Transmitter shutdown (or optional push button) 1-) Hood Shutdown (5 pin Gray wire) [+) Shutdown 15 pin Brown w ire) 1-l Neutral safety shutdown (5 pin Black/White wire) Wait-to-start timed out

The System Features learn Routine dictates how the unit operates. It is fXJssible to access and change most of the feature settings using the Valet button . 1 Turn the ignition on, then off. 2. Select a Menu. Press and hold the Valet button. The number of LED flmhes and horn honks indicates the menu number_ A single LED flash and honk indicates menu 1 Two LED flashes and 2 honks indicates menu 2. 3. When the desired menu LED flashes and honks are heard, release the Valet button 4. Select a Feature. Press and release the Valet button the number of limes corresponding to the feature you wish to change. Then press and hold one more time to select the feature. The LED flashes and the horn honks to indicate which feature is selected. 5. Program the Feature_ While holding the Valet button, you con program the feature using the remote control For features with only two options; ~ = o~tion 1 while • =option 2. For features w ith more than two options; #J selects the options in ascending order_ The LED flashes and the horn honks indicating which option is selected Once o feature is programmed: O ther features can be programmed within the some menu Another menu con be selected The learn routine can be exited if programming is complete To access another feature in the some menu: 1 Press and release the Valet button the number of times necessary to advance from the feature you just pro- grammed to the next one you wont to program Then press the Valet button once more and hold it. To select another menu: 1 Press and hoJd the Valet button. 2. After 3 seconds, the unit advances to the next menu, the horn honks and LED flashes indicating which menu has been accessed. The learn routine exits if any of the following occurs: The ignition is turned On There is no activity for 30 seconds The Valet button is pressed too many times Bitwriler -Onlv Ootions 11 11 programming with the Bitwriter®, the learn routine con be locked or unlocked. If the learn _routine has previously been locked, it must be unlocked with Bitwriler®- this cannot be done manually w1th the Valet button. The Bitwriter® II gives you access to a wider range of system options. These features and the adjustments that may be programmed are described in the table below. ~~~ Options ow . . .... ~ ' Die.::_l start d~y lime (seconds) N ot initialized ~ ? to I second in 50 mil- - . -. l1second increments t:s Remote control programming Unlocked __ J ~:1':~~----·--j Feature Pr~gr?mmi~g - Unlocked ~ locked • 0 2012Directed.AIIrights Reserved. Eeature_Menus_ Default settings are in bold type. Menu 1 Feature # Feature Opt. 1 Opt. 2 Opt. 3 Opt.A Opt. 5+ ----- ---------- Horn function Siren Siren Siren Siren 20 mS 30 mS 40 mS 50 mS -- -- ---------------~-- -~~- - -~ ------- Off Ignition con- On trolled lock Ignition con- O n Off trolled unlock 4 Doorlock out· 0.8 sec. 3.5 sec. 0.4 sec. ~~~?~~----------------------------- 6 Double pulse Off On unlock Double pulse lock On 7 Factory Alarm with unlock Disarm func- Before unlock Remote start only 9 tion Factory Alarm Disarm Pulses Comfort Comfort Closure Closure 1 Double Off - ------·-----------· 10 Panic On Off Menu 2 -"-or·--~··=--~----~ Feature # Feature ------------- - Comfort Closure 2 Opt.3 Opt. A Engine check- Virtual tach voltage Off tachometer ing Engine i2o1i~ - 24 min Runtime 60min Pork light Pulsed·' Constant output Opt.5+ 4 Cranking time 0.6 sec. 0.8 sec. 1.0 sec. 1.2 sec. 1.4, 1.6, 1.8, 2.0, 4.0 sec 2 pulses 3 pulses Accessory 7 Accessory Off during On during ------~~~~~-~---wai~~~~2 --------------~---- --~---------- 8 2nd Stall.ls Normal Latch rear Pulse rear r----- -behavior defog~er defogger ---~------------ 9 Anti-grind On Off 10 1 t start Timer mode run time 12min Timed 15 sec 30 sec. Timed 45 sec. 3 min 6min 9 min Remo.teJlr.ogromUJJmtJUingH--~~- 1 Turn key to the ON position 2. Within 5 seconds, press and release Valet button one time. 3. Within 5 seconds, press and hold the Valet button. The LED w ill flash one time and the horn honks to confirm entry into remote programming 4. Press the ~ button on the remote control 5 The horn honks to confirm the remote has been programmed . 6. Release the Valet button, and turn the key to the Off position 7. The horn sounds one long honk to confirm that remote programming has been exited The programming routine exits if any of the following occurs: The ignition is turned off There is no activity for 30 seconds The Valet button is pressed too many limes furncle~runc~tio~n~s ________________________________ __ r ICON ~~~ 1 ro;-DESCRIPTloN _________ --------------------- -1 r-a- e·-- ~;~- --p~;,;i-;;-gf;;;;-ne s.;;,ondl~k;lh;;;~(ii~h~d~r ~~~~0-;;;~~-;;~-;~;;;d) J !-----,-- ____________ ,_ ___________ _________________________________________ , ~ $ UNLOCK Pressing for one second unlocks the doors lif connected! i I -@-- ;;;;;;;·;;.~, -..;..p;;,;t~--;~;-ct;;iy;lc;;i-~;;d,~-;;-~-:,~hid~fo;-;;~;~;,;;cl,T,;f,e riod--;-,f~ ~~;-···~t~~j,~i~~ -' *l!'~~;~:~:if~~;,~~~t;t~~~~~;{l~t:dan-~;;"~-;~;;;db;f~;;;j I locking or unlocking. This buHon con also be used for an optional auxiliary 1 L-.------~unct.i~ such as l~nk relea.::____ _j Note: See Owner's guide for more details G.uide Translations For a Spanish or French version of the Installation Guide, please download it from www.directechs.com under "Resources". Troducci6n de los manuales· Para obtener uno versiOn en Esponol o Frances del Manual de lnstalaci6n, desc6rguela de www.directechs.com bajo el Htulo "Recursos" ("Resources") Traduction du guide Pour une version fron<;aise ou espognole du guide d'installation, veuillez le te- lecharger 0 www.directechs.com sous «Resources•. Bitvvriters with o dote code of 6o 01 older require on tC upgrade lp/n 998M). Some bitwriters with a dole code of 6B do not require the tC upgrade, refer to tech tip # 1 1 l 2 for more information II p=-~ I OATA TO DA TA ''" 1~1 The Bitwriter® lp/n 998U) requires chip version 2.7 or newer to program this unit See fu l llnstallatio~ Guide fo~. more D I RE CTE D detailed rnformalron on th1s sys· e> tern. /1/ot::Jre con be found online at: lf.llloiiN.directechs.com QIIN4tosvmt1-00 2 L.A041050

If vehicle battery is disconnected, the system may attempt to start when the battery is reconnected or transmitter is used. Press brake to disengage. Check with vehicle owner to determine if hood pin switch or override switch was installed to disengage the system for service. IMPORTANT SAFETY NOTICE , A.;~ ~.......... - . r. ,.

correspondence to: Directed 1 Viper Way Vista, CA 92081 X F R.O 1-01 DIRECTED® PO BOX 17 4391 DENVER CO 80217-4391 11 •• 1.11 ••••• 1.1 ••• 111 ••• 1.1 •• 1 •• 11.1.1 ••••• 111.1 ••••• 11.1.1.1 DIRECTED® PRODUCT REGISTRATION Protect Jbur lnreslnJIIJt Register your product now -- to receive these benefits: ~ Owner Verification Proof of purchase in case of product theft or loss ~ Efficient Warranty Service In case there is a problem with .your product Or register online at www.prodregister.com/directed

Please complete and return within the next 10 days · . . ® or register online at productregister.com/directed. XFR01 1. 1. D Mr. 2. D Mrs. 3. D Ms. 4. D Miss Initial Last Name 2. Your date of birth: Month Year 3. Marital status: 01. D Married 02. D Single 4. Date of purchase: Month Day Year 5. Model number: 6. Name of store where purchased: 7. Price paid: (excluding tax) 8. Which Directed brand did you purchase? 01. D Autostart 04. D Python 02. D Avital 05 D Vyper 03. D Clifford 06 D Other 9. What type of product did you purchase? 01. D Security system 02. D Security system with remote start 03. D Remote start system 04. D Keyless entry system 1 0. In what vehicle will this product be used? 01. D Car 04. D Van 07. 0 02. D Truck 05. D Minivan 08. D 03. D SUV 06. D Motorcycle 09. D Make of vehicle: Model name: VIN: Boat Motorhome Other 01. D Bought new 03. 02. D Boughtused 04. D Failure to return this form will not change your warranty rights. 11. How did you first become aware of this product? (check one) 01. D Local newspaper 07. D Radio commercial 02. D Yellow pages 08. D Salesperson's 03. D Magazine Ad recommendation 04. D TV commercial 09. D Motorsports 05. D Magazine.article/ sponsorship review 10. D Internet 06. D Friend/Relative's 11. D Other recommendation 12. What factors most influenced the purchase? (check up to three) · 01. D Directed's reputation 09. D Rebate/Promotion 02. D Experience with 1 0. D Style/Design/Color Directed products 11. 0 Dealer proximity 03. D Experience with dealer 12. D Friend's 04. D Value/Price recommendation 05. D Special features 13. 0 Salesperson 06. D Warranty recommendation 07. D Quality/Durability 14. 0 Compatibility w/vehicle 08. D Display in-store demo 15. D Other 13. What benefits most influenced your decision to purchase this product? (check up to three) 14. 01. D Improved security 11. D Warranty 02. D Improved convenience 12. D PriceNalue 03. D Improved performance 13. D Rebate/Promotion 04. D Compatibility w/vehicle 14. D Immediate 05. D Ease of installation availability 06. D Style/Design/Color 15. D Friend/Family's 07. D Special features recommendation 08. D Quality/Durability 16. D Salesperson's 09. D Increase vehicle value recommendation 10. D Functionality 17. D Dealer proximity What other brands did you seriously consider before making this purchase? 01. D No other brands 06. D Compustar considered 07. D Prestige 02. D Other Directed brands 08. D Pursuit 03. D Code Alarm 09. D Crime Stopper 04. D Audiovox 10. D Bulldog 05. 0 Auto Page Copyright 0 2012 All Rights Reserved - Please seal with tape. Do not staple. 540-()()70 (B) LRDEI007