Vivotek SD83x4E Quick Installation Manual
Text of the manual
Quick Installation Guide
NEMA 4x • IP66 • Extreme Weatherproof
SD83xxE/-M
Speed Dome
Network Camera
English
繁中
日本語
Español
Português
簡中
Français
Deutsch
Italiano
Türkçe
Polski
Русский
Česky
Svenska
Dansk
Nederlands
Indonesia
Warning Before Installation
Refer to your user’s manual for the
operating temperature.
Power off the Network Camera as soon as
smoke or unusual odors are detected.
Do not touch the Network Camera during
a lightning storm.
Do not disassemble the Network Camera.
Do not drop the Network Camera.
Do not insert sharp or tiny objects into the
Network
SD/SDHC/SDXC Card Slot
Status LED
Network LED
Reset Button
Camera Body
This drawing shows a camera with its dome
cover removed.
The SD card slot is accessed by
removing the top section using the
T25 stardriver.
HD WDR Pro
IMPORTANT:
If your camera comes without the dehumidifier,
you should examine whether the color of the
silica gel inside the chassis has turned red. If
so, you should replace the desiccant bag.
To replace the desiccant bags:
1. Remove the dome cover by loosening 4 T25
anti-tamper screws.
2. Replace the desiccan
1. The camera weighs 3.66kg. Select a rigid mounting location to prevent vibration to
the camera. Attach the alignment sticker to the wall.
2. Drill 4 pilot holes (10mm in diameter and 4cm deep) into the wall, and then hammer in
threaded anchors. Note that you should hammer the anchors with hex nuts on them
so that the threaded poles will not be deforme
