Vizio E321MV Operation & User’s Manual

Dolby and the double-D symbol are trademarks of Dolby Laboratories. This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. SRS TruSurround HD and SRS TruVolume are trademarks of SRS Labs, Inc. TruSurround HD and TruVolume technologies are incorporated under license from SRS Labs, Inc. HDMI, the H Interface are

And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts. Product Registration To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at 1-888-849-4623. We recommend that you either: • Register your VIZIO product at www.VIZIO.com • Complete and mail the enclosed registration card Extended Warranties For peace of mind, and to protect your investment beyond the standard warranty, VIZIO offers on-site extended warranty service plans. These plans provide additional coverage during the standard warranty period. To purchase an extended warranty service plan, visit www.VIZIO.com. When Reading this Manual When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions. When you see this symbol, please read the accompanying helpful tip. My Product Information Enter your product information here for eas Model Number: Serial Number: Date of Purchase: VIZIO recommends you attach your sales r Attach Sales Re

• Unplug the power cord before cle • When moving your TV from an are high temperature, condensation m turning on your TV to avoid causin damage. • A distance of at least three feet sh and any heat source, such as a ra not install your TV close to smoke or moisture may cause fire or elec • Slots and openings in the back an for ventilation. To ensure reliable o from overheating, be sure these o Do not place your TV in a bookcas is provided. • Never push any object into the slo Do not place any objects on the to circuit parts causing a fire or elect TV. • Your TV should be operated only f indicated on the label. If you are n to your home, consult your dealer • Do not apply pressure or throw ob compromise the integrity of the di does not cover user abuse or imp • The power cord must be replaced voltage specified. For more inform • Your TV is equipped with a three-p a third grounding pin). This plug w outlet. This is a safety feature. If y three-pronged, have an electrician adapter to ground your TV safely. the grounded plug. • When connected to a power outle TV. To totally disconnect power, un • The lightning flash with arrowhead is intended to alert the user to the voltage within the inside of your T to constitute a risk of electric shoc Important Safety Instructions Your DTV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference. • To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with a dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed

result in fire or electric shock. • The wall socket should be installed near your TV and easily accessible. • Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock. • Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms. • Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges. • Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel. • WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock. • Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself. • Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your TV may cause fire or electric shock. • Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock. • Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV. • When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your TV will not be used for an extended period of time, unplug the power cord. • To reduce risk of electric shock, do not touch the connector with wet hands. • Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which injure the operator. Do not expose sunshine, fire or the like. • If any of the following occurs, con - The power cord fails or frays - Liquid sprays or any object - Your TV is exposed to rain o - Your TV is dropped or dama - The performance of your TV • This apparatus shall not be expos no objects fill with liquids, such as apparatus. • The mains plug or appliance coup the disconnect device shall remain • CAUTION - These servicing instru personnel only. To reduce the risk servicing other than that contained you are qualified to do so. The lightning flash with arrowhead intended to alert the user to the p VOLTAGE within the product’s magnitude to constitute a risk of e h

If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode. Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system. Power Lines Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation. DTV Transition Advisory The nationwide switch to digital television 12, 2009. Analog-only television sets that antenna now need a converter box to con your local stations to find out when they wi to digital-only broadcasting. Analog-only T to receive low power, Class A or translator satellite TV services, gaming consoles, VC For additional information, please contact t FCC (US Federal Communications Com Web: www.fcc.gov Phone: 1-888-CALL-FCC (1-888-225-53 TTY: 1-888-TELL-FCC (1-888-835-5322) Fax: 1-866-418-0232 E-mail: [email protected] NTIA (National Telecommunications and Web: www.ntia.doc.gov Phone: 1-888-DTV-2009 (1-888-388-2009 List of US Television Stations: www.high-te Your TV comes with a built-in t broadcasts. No extra converter b Ground Clamp Antenna Lead In Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC ART 250, part H) Electric Service Equipment

Table of Contents......................................................................7 Installing the TV........................................................................1 Inspecting the Package Contents............................................................1 Installing the TV........................................................................................1 Installing the TV Stand..........................................................................1 Installing the TV on a Wall.....................................................................2 Controls and Connections.........................................................4 Rear Panel................................................................................................4 Right Side Panel.......................................................................................5 Front Panel...............................................................................................5 Remote Control........................................................................................6 Replacing the Batteries.........................................................................7 Connecting Your Devices...........................................................8 Before You Begin.....................................................................................8 Connecting Your Devices.........................................................................8 Completing the First-Time Setup...............................................10 Adjusting the TV Settings..........................................................11 Navigating the On-Screen Menu..............................................................11 Changing the Input Source......................................................................11 Customizing Input Names....................................................................12 Setting Up Channels................................................................................12 Changing the Signal Source.................................................................13 Scanning for Channels..........................................................................13 Scanning for New or Additional Channels............................................14 Removing Channels from the Master List.............................................14 Changing the Audio Language.............................................................15 Customizing Channel Names...............................................................15 Changing the On-Screen Menu Language..............................................16 Setting the TV’s Date and Time................................................................16 Setting the Time Zone.......................... Adjusting the Time for Daylight Saving Enabling or Disabling Automatic Date Setting the Date and Time................... Adjusting the TV Settings for Use with A Turning the VIZIO Light On or Off............ Using the Other Menu Settings......... Navigating the On-Screen Menu............. Setting the Sleep Timer........................... Viewing a USB Photo Slideshow............ Using the Photo Menu......................... Using the Modify Photo Menu............. Setting the Screen Aspect Ratio............. Screen Aspect Ratio Table................... Adjusting the Audio Settings................... Enabling or Disabling SRS TruSurroun Enabling or Disabling SRS TruVolume. Adjusting the Equalizer Settings.......... Adjusting the Speaker Balance............ Enabling or Disabling the Built-In Spea Selecting the Digital Output Mode....... Adjusting Bass and Treble Levels........ Resetting the Audio Settngs................ Adjusting the Picture Settings................. Enabling or Disabling the Ambient Lig Changing the Picture Mode................. Adjusting the Noise Reduction Setting Adjusting the Color Temperature......... Enabling or Disabling Color Enhancem Enabling or Disabling Adaptive Luma.. Enabling or Disabling DCR (Dynamic C

Using the Parental Controls.....................................................................28 Accessing the Parental Controls Menu.................................................28 Locking and Unlocking Channels.........................................................29 Blocking and Unblocking Content by Rating........................................29 Setting the TV Button Locks.................................................................30 Changing the Parental Control Passcode.............................................30 Resetting the Content Locks................................................................30 Viewing System Info and Resetting to Factory Defaults..........................31 Displaying System Information.............................................................31 Restoring the TV to the Factory Default Settingss...............................31 Restarting the Setup Wizard.................................................................31 Setting Up Closed Captioning.................................................................32 Changing the Appearance of Digital Closed Captions.........................32 Troubleshooting & Technical Support........................................33 The TV displays “No Signal.”................................................................33 There is no power..................................................................................33 The power is on, but there is no image on the screen..........................33 There is no sound.................................................................................33 The colors on the TV don’t look right....................................................33 The buttons on the remote aren’t working............................................33 The image quality is not good...............................................................33 The picture is distorted.........................................................................34 The display image does not cover the entire screen............................34 The TV has pixels (dots) that are always dark or always lit..................34 I see “noise” or static on the screen.....................................................34 When I change input source, the volume changes...............................34 When I change input source, the display image changes size.............34 Specifications...........................................................................35 Limited Warranty......................................................................36 ON PARTS AND LABOR......................... Parts and Labor................................... Type of Service.................................... Limitations and Exclusions.................. Personal Data...................................... Zero Bright Pixel Defect Guarantee..... Legal & Compliance......................... FCC Class B Radio Interference State Notice................................................... FCC warning........................................ Caution................................................ Open Source Software Notice.............

Inspecting the Package Contents Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. When you have completed your inspection, install the TV. Remote Control with Batteries User Manual and Quick Start Guide VIZIO LCD HDTV with Stand Installing the TV After removing the TV from the box and ins begin installing the TV. Your TV can be inst • On a flat surface, using the includ • On a wall, using a VESA-standard Installing the TV Stand Your TV includes a stand designed to sup from falling over. However, the TV can still • It is placed on an uneven, unstabl • It is pushed, pulled, or otherwise i • If an earthquake occurs and the T To install the TV stand: 1. Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV o a soft surface, such as carpet, rug, or blanket. 2. Align the base with the stand neck. Gently push the base onto the stand neck. If the base is not joining with the stand neck, you may have it facing backwards. Package Contents

To mount your TV on a wall, you will need below to find the appropriate mount for yo Screw Size: Screw Length: Screw Pitch: Hole Pattern: 2 Installing a TV on a wall requires to the TV, ask someone to help y Be sure the mount you choose is capable o you have determined that you have the co the installation. To install your TV on a wall: 1. Disconnect any cables connected to your TV. 2. Place the TV face-down on a clean, flat, stable surface. Be sure the surfac is clear of debris that can scratch or damage the TV. 3. Turn the attached thumbscrew until it is completely tightened. Fold down the thumbscrew tab so it is flat against the bottom of the base. 4. Move the TV with attached stand into an upright position and place on a flat, level, and stable surface. 5. To ensure proper ventilation, leave at least 1” of space between the back of the TV and any other objects (walls, etc). 1”

is completely loosened. 4. Gently remove the stand neck. 5. Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of this TV. See Appendix A - Specifications for the weight of this TV.

HDMI (1,2,3): Connect HDMI dev Component: Connect componen Composite: Connect composite 3.5mm Stereo Out: Connect 3.5mm au Cable/Antennal: Connect RF/Coaxia satellite box. RGB PC: Connect RGB cable connect PC audio. 3.5mm PC Audio In: Connect 3.5mm ca RGB PC port to dis Optical Digital Audio Out: Connect SPDIF/Op receiver, etc). Rear Panel Rear Panel RGB PC Optical Digital Audio Out USB HDMI (1,2,3) Composite Component 3.5mm Stereo Out Cable/Antenna 3.5mm PC Audio In

Right Side Panel Power Menu Channel Up Volume Up Channel Down Volume Down Input Power: Turn the TV on or off. Menu: Display on-screen menu. Channel Up/Down: Change the channel. Volume Up/Down: Increase or decrease the loudness of the TV audio. Input: Change the input device. Press once to display the Input menu. Continue pressing the button to highlight a different input source. Press Menu to confirm your selection. Front Panel VIZIO Light Remote Control Sensor: When using t sensor. VIZIO Light: This light is w When the TV

Input: Change the input dev A/V Controls: Control external devi devices only). Info: Display the Info Wind CC: Open the Closed Cap Menu: Display the on-scree Exit: Close the on-screen Arrow: Navigate the on-scre guide. OK: Select highlighted me Guide: Display the episode g only). Back: Go to the previous on tions. V Button: Launch the USB pho Channel Up/ Down: Change the channel. the button, the chann decrease by one. Volume Up/ Down: Increase or decrease TV’s audio. Mute: Turn the sound off or activated, the TV’s au Last: Return to the channe Number Pad: Use the number pad channel. Dash (-): Use with number pad digital sub-channel. (For ex Wide: Switch between disp Remote Control Power/Standby A/V Controls Info Menu Arrow Channel Up/Down Last Number Pad Wide Mute Volume Up/Down OK Exit Input Guide Back Dash (-) CC V Button Remote Control

1. Remove the battery cover by pressing gently on the “V” and pushing the cover away from the remote. 2. Insert two AAA batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. • Use only good quality batteries. • Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury. • Dispose of old or dead batteries in accordance with local hazardous waste regulations. • Keep batteries away from children and pets.

• DVD or Blu-Ray player • Video game console • Cable box • External antenna • Or other device Before You Begin To connect a device to the HDTV: 1. Verify that the device has one of the following types of video ports available: Required Device Ports HDMI RGB RF/Antenna Component Composite AV 2. Ensure the TV has a matching port available. 3. Ensure you have a cable that matches the available port. For example, if you are connecting a Blu-ray player with an HDMI port, be sure you have an HDMI cable. Connecting Your Devices Once you have determined the best ava device and the TV, ensure you have the co To connect a device to the TV: 1. Ensure both the TV and your device a 2. Connect the device and the TV. Use th Device Connection Chart on the next Ensure each end of the cable is secur 3. Turn the TV on by pressing the Power 4. Turn your device on. 5. When you are ready to use your newly button on the remote and select the c the on-screen menu. Press OK. 6. Check the list of devices/connection t • Cable TV (without cable box/direc Perform a channel scan. See Scan • RGB Make sure the desktop resolution the Screen Mode to Normal. Con

Use the cable(s) shown to connect the TV to your device.

the steps necessary to get your TV ready for use. Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. • Have your remote ready. Ensure the batteries are inserted. • Your devices should be connected. To complete the first-time setup: 1. Turn the TV on by pressing the Power/Standby button on the remote. The Setup App is displayed. Use the Up/Down Arrow buttons on the remote to highlight your preferred language, then press OK. 2. Use the Up/Down Arrow buttons on the remote to highlight Home Mode, then press OK. 3. Use the Up/Down Arrow buttons on the remote to highlight your time zone, then press OK. Press the Up/Down Arrow buttons on the remote to highlight Off or On for daylight savings time, then press OK. 4. If the TV is connected to an external antenna, select Antenna, then press OK and go to step 5. If the TV is connected to a cable service without a set-top box (cable is connected directly from the wall outlet select Cable, then press OK and go to step 5. If the TV is connected to a cable or satellite set-top box, press the EXIT button on the remote, then select the input to which your set-top box is connected (HDMI, COMP, or AV). 5. Use the Up/Down Arrow buttons on the remote to highlight Scan, then press OK. The TV begins a channel scan. Wait for the channel scan to finish. 6. When the channel scan is complete, the Congratulations screen is displayed. The first-time setu Completing

• Change the input source or rename inputs • Set up channels • Change the on-screen menu language • Change the TV’s date and time • Adjust the TV settings for use with a PC • Turn the VIZIO light on or off Navigating the On-Screen Menu To open the on-screen menu, press the OK or MENU button on the remote. Use the Arrow buttons to highlight a menu option, and press the OK button to select that option. Changing the Input Source External devices such as DVD players, Blu- can be connected to your TV. To display must first change the input source in the o To quickly access the Input Sour on the remote. To change the input source from the TV me 1. Press the MENU button on the remote The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV menu is displayed. 3. Highlight Input and press OK. The Input menu is displayed. 4. Use the Arrow buttons to highlight the input source you want to display and press OK. Adjusting the TV Settings

When you have multiple devices connected to your TV, it can become difficult to remember the inputs to which they are connected. Your TV features the ability to customize the names of these inputs to make them easy to remember. (Custom names have a 10-character limit.) For example, HDMI 1 could be renamed as My Blu-ray. To customize an input name: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight TV and press OK. 3. Use the Arrow buttons to highlight Input and press OK. 4. Use the Arrow buttons to highlight Input Naming and press OK. 5. Use the Left/Right Arrow buttons on the remote to highlight the input source you wish to rename. 6. Use the Arrow buttons to highlight Custom Label and press OK. The on-screen keyboard is displayed. 7. Use the Arrow and OK buttons to spell the custom input name. When you are finished, highlight OK and press OK. 8. Press EXIT. Setting Up Channels From the channel menu you can: • Change the signal source • Start a new channel scan • Scan for new/additional channels • Remove channels from the maste list • Change the audio language • Customize channel names

Using this option, you can change the signal source for the coaxial (TV) input. To change the signal source: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Channels and press OK. 4. Use the Arrow buttons to highlight Signal Source and press OK. The Signal Source menu is displayed. 5. Use the Arrow buttons to change the setting to Cable or Antenna. 6. Press EXIT. Scanning for Channels Before the TV can detect and display chan you must scan for channels. A channel s TV has been moved to an area where dif channels are available. To scan for channels: 1. Press the MENU button on the remote The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Channels and press OK. 4. Use the Arrow buttons to highlight Auto Channel Scan and press OK. 5. Use the Number Pad to enter your parental control passcode. The channel scan begins. 6. Wait for the channel scan to reach 100%, then press EXIT. If you want to cancel the channel scan before it is completed, highlight Cancel and press OK.

When a new channel becomes available in your area, you do not have to rescan all channels to add the new channel. Using the add channel feature, you can restrict the scan to new channels only. This is useful because your master channel list settings are preserved. To scan for new channels: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Channels and press OK. 4. Use the Arrow buttons to highlight Additional Scan. 5. Use the Arrow buttons to change the option to On. 6. Perform a channel scan. See Scanning for Channels on page 13. Removing Channels from the Master Li By customizing the master channel list, yo displayed. Channels not in the list will not television. 1. Press the MENU button on the remote The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Channels and press OK. 4. Use the Arrow buttons to highlight Skip Channel, then press OK. The master channel list is displayed. 5. To add a channel to the list, highlight the channel and press OK. When a channel is added, a check mark is displayed next to the channel. To remove a channel from the list, highlight the channel and press OK. When the channel has been removed, the checkmark is not displayed. To add all available channels to the lis highlight Mark All and press OK. To remove all available channels from the list, highlight Unmark All and pres OK. To include only digital channels in the list, highlight Skip Analog Only and press OK. 6. Press EXIT.

Some digital free-to-air and cable channels broadcast programs in more than one language. The TV’s MTS (Multichannel Television Sound) feature allows you to listen to audio in your preferred language. Not all programs are broadcast in multiple languages. The MTS feature only works when the program being viewed is being broadcast in the language you select. To use the Analog MTS feature: 1. From the TV Settings menu, highlight Channels and press OK. 2. Highlight Analog MTS and press OK. 3. Select Mono, Stereo, or SAP (secondary audio programming). Press OK. 4. Press the EXIT button on the remote. To use the Digital MTS feature: 1. From the TV Settings menu, highlight Channels and press OK. 2. Highlight Digital MTS and press OK. 3. Select your preferred language: English, French, or Spanish. Press OK. 4. Press the EXIT button on the remote. Customizing Channel Names Your TV features the ability to customize identify. (Custom names have a 10-charac For example, KBOT-DT could be renamed To customize a channel name: 1. Press the MENU button on the remote The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Channels and press OK. 4. Use the Arrow buttons to highlight Channel Name Edit and press OK. 5. Use the Arrow buttons to highlight Custom Label and press OK. The on-screen keyboard is displayed. 6. Use the Arrow and OK buttons to spe the custom channel name. When you are finished, highlight OK and press OK. 7. Press EXIT.

Your TV can display the on-screen menu in different languages. To change the on-screen menu language: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Menu Language and press OK. 4. Use the Arrow buttons to highlight your preferred language and press OK. 5. Press EXIT. Setting the TV’s Date and Time From the Date & Time menu, you can: • Set the time zone • Adjust the time for daylight saving • Enable or disable automatic date • Set the current date and time Setting the Time Zone To set the time zone: 1. Press the MENU button on the remote The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Date & Time and press OK. 4. Use the Arrow buttons to highlight Time Zone and press OK. 5. Use the Arrow buttons to highlight your time zone and press OK. 6. Press EXIT.

When enabled, this setting will automatically adjust the time for zones which recognize daylight savings time. To enable or disable the daylight savings adjustment: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Date & Time and press OK. 4. Use the Arrow buttons to highlight Daylight Saving. 5. Use the Arrow buttons to change the setting to On or Off. 6. Press EXIT. Enabling or Disabling Automatic Date and Time Updates The current date and time is broadcast digitally in many areas. Your TV can automatically set the time and date using this information. When this setting is On, you cannot manually set the date and time. To enable or disable automatic updates: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Date & Time and press OK. 4. Use the Arrow buttons to highlight Auto Update. 5. Use the Arrow buttons to change the setting to On or Off. 6. Press EXIT. Setting the Date and Time Using this menu option, you can manually To manually set the time: 1. Press the MENU button on the remote The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Date & Time and press OK. 4. Use the Arrow buttons to highlight Current Time. 5. Use the Arrow buttons to highlight individual numbers in the date and time. Use the Number Pad to enter th current date and time. 6. Press EXIT. To manually set the date: 1. Press the MENU button on the remote The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight Date & Time and press OK. 4. Use the Arrow buttons to highlight Today’s Date. 5. Use the Arrow buttons to highlight individual numbers in the date and time. Use the Number Pad to enter th current date and time. 6. Press EXIT.

Your TV can be used to display output from a home computer using the RGB port. These settings are only available when viewing content from the RGB port. To adjust the PC settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed. 3. Use the Arrow buttons to highlight PC Settings and press OK. 4. Use the Arrow and OK buttons to adjust each of the following options: Horiz. Position - Adjust the horizontal (left/right) position of the picture. Vertical Position - Adjust the vertical (up/down) position of the picture. Fine Tune - Adjust the synchronization between the PC and the TV. Increase or decrease this setting if you see “waviness” or a blurry picture. If you would like the TV to automatically adjust the picture for best quality, select Auto Sync and press OK. Turning the VIZIO Light On or Off This setting allows you to turn off the back- TV. To turn the VIZIO Light on or off: 5. Press the MENU button on the remote The on-screen menu is displayed. 6. Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed. 7. Use the Arrow buttons to highlight VIZIO Logo and press OK. 8. Use the Left/Right Arrow buttons to select On or Off: • When set to Off, the VIZIO logo will briefly light up when the TV is turned on. It will remain off while the TV is on. • When set to On, the VIZIO logo w stay lit while the TV is on.

• Set the sleep timer • View a USB photo slideshow • Set the screen aspect ratio • Adjust the audio settings • Adjust the picture settings • Adjust the parental controls • Get system info or reset to factory defaults • Set up closed captions Navigating the On-Screen Menu To open the on-screen menu, press the OK button on the remote. Use the Arrow buttons to highlight a menu option, and press the OK button to select that option. Setting the Sleep Timer When activated, the TV’s sleep timer will tu To use the sleep timer: 1. Press the MENU button on the remote The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the Timer icon and press OK. The Timer menu is displayed. 3. Use the Up/Down Arrow buttons on the remote to highlight the period of time after which you want the TV to power off (30, 60, 90, or 120 minutes). 4. Press OK, then press EXIT. Using the Other Menu Settings

Your player features a USB port where you can connect and share a USB thumb drive containing your photos. The TV supports the following file types: Media Type File Types Images .jpeg .jpg To play USB media, you must first save your images onto a USB thumb drive. Remember: • The USB thumb drive must be formatted as FAT32 • Files on the USB thumb drive must be a supported file type • The USB thumb drive must have a minimum 1GB memory • The TV will not play media from external hard drives or mp3 players To play your USB media: 1. Load your photos onto a USB thumb drive using your home computer. 2. Insert the USB thumb drive into the USB port on the back of the TV. 3. Press the MENU button on the remote. The on-screen menu is displayed. 4. Use the Arrow buttons on the remote to highlight the Photo icon and press OK. The Photo screen is displayed. 5. Use the Arrow buttons on the remote to highlight the photo you would like to be displayed first, then press the Play button. The slideshow begins. • To pause the slideshow, press the Pause button. • To go to the previous photo, press the Stop button. • To exit the slideshow, press the EXIT button. Using the Photo Menu The Photo menu has several options: • Browse Photos - Allows you to highlight and select a photo from the thumbnail gallery. • View Slideshow - Start a full-screen photo slideshow. • Sort by - Change the display orde of photos. Choose Original, Title A-Z, Title Z-A, Oldest First, or Newest First. • View - Choose Folders (individua folders and their contents), Favorites, or All. • Slide Settings - Change the slideshow settings. Available options are Repeat, Shuffle, Full Screen (this may distort some photos to fill the screen), and Speed (Slow or Fast). • Picture Settings - Change the display settings. See Adjusting the Picture Settings on page 25. • Thumbnail Size - Move the on-sc displayed thumbnail images. Choo

This menu allows you to zoom in and out, mark your favorite photos, rotate photos, and see your image metadata. To open the Modify Photo menu: 1. When you are viewing a photo in fullscreen, press the OK button on the remote. The Modify Photo menu is displayed. 2. Use the Arrow and OK buttons on the remote to select one of the menu options: • Zoom In - Select this option up to 4 times to zoom in. • Zoom Out - Select this option to zoom back out. • Pan - Select this option when zoomed in to move the image. • Favorite - Select this option to mark the image as a Favorite. You can then use the View Favorites option to display only marked photos. • Rotate Photo - Select this option to rotate the photo 90° counter- clockwise. This option cannot be selected while zoomed in. • Info - Select this option to open an info window. The window displays image metadata including date, resolution, and file size. The metadata may vary according to your camera settings. 3. When you have finished, use the Arrow buttons to highlight Done and press OK. Setting the Screen Aspect Ratio The TV can display images in five different m and Stretch. Each mode changes the pict format. Use the table on the next page to determin type. Areas in red will not be visible on you To adjust the screen aspect ratio: 1. Press the OK button on the remote. T 2. Use the Arrow buttons on the remote OK. The Wide menu is displayed. 3. Use the Left/Right Arrow buttons on mode you want to display, then press • Normal preserves the content’s o aspect ratio is not large enough to added to the left and right of the d • Wide stretches a 4:3 aspect ratio Since the picture is being stretche distorted. If the program is already (1.85:1 or 2.35:1), then black bars the display image. • Zoom expands images with black • Panoramic expands the display im appear wider than intended. If you or 2.35:1) content, black bars will of the display image. This option displaying a 480i/480p source. • Stretch expands the display imag appear wider than intended. If you or 2.35:1) content, black bars will of the display image. This option displaying a 720p/1080i/1080p s You can also quickly access the button on the remote.

Using the Audio Settings menu, you can adjust the following: • Enable or disable SRS TruSurround HD™ • Enable or disable SRS TruVolume® • Adjust the equalizer settings • Adjust speaker balance • Enable or disable the built-in speakers • Select the digital audio output mode • Adjust bass and treble levels • Reset the audio settings Enabling or Disabling SRS TruSurround HD TruSurround HD is a robust multichannel virtualization technology developed by SRS Labs that provides an enhanced listening experience unlike any other technology offered for a two speaker playback environment. To enable or disable SRS TruSurround HD: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press OK. 3. Use the Arrow buttons to highlight SRS TruSurround HD. 4. Press the Right/Left Arrow buttons to select On or Off and press EXIT. Enabling or Disabling SRS TruVolume TruVolume intelligently normalizes volume commercials or channel changes. To enable or disable SRS TruVolume: 1. Press the OK button on the remote. T 2. Use the Arrow buttons to highlight Au 3. Use the Arrow buttons to highlight SR 4. Press the Right/Left Arrow buttons to Adjusting the Equalizer Settings Your TV features six preset equalizer se customize your TV’s sound to match the enjoy. To adjust the equalizer settings m be set to Off. To adjust the equalizer settings: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press OK. 3. Use the Arrow buttons to highlight Equalizer Settings and press OK. 4. Use the Arrow buttons to highlight on of the following settings and press OK • Flat • Classical • Rock • Pop • Jazz 5. Press EXIT.

The built-in speakers can be adjusted to distribute the sound between the left and right speakers. To adjust the speaker balance: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press OK. 3. Use the Arrow buttons to highlight Balance and press OK. 4. Use the Arrow buttons to adjust the speaker balance: • To increase the loudness of the right speaker, increase the balance setting. • To increase the loudness of the left speaker, decrease the balance setting. Enabling or Disabling the Built-In Speakers Using this menu option, you can turn the built-in speakers on or off. This is often used when the TV is connected to a home audio system. To enable or disable the built-in speakers: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press OK. 3. Use the Arrow buttons to highlight Speakers and press OK. 4. Press the Right/Left Arrow buttons to select On or Off and press EXIT. Selecting the Digital Output Mode Using this menu option, you can force the formats to PCM audio. You may want to us receiver connected to the TV. If you are unfamiliar with audio fo to an audio receiver, VIZIO recom This option only affects audio ou To select the digital output mode: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press OK. 3. Use the Arrow buttons to highlight Digital Audio Out and press OK. 4. Use the Arrow buttons to highlight Auto or Force PCM and press OK. 5. Press EXIT.

The bass and treble levels for your TV’s built-in speakers can be adjusted to your liking. To adjust the bass and treble levels, SRS TruSurround HD must be set to Off. To adjust the bass and treble levels: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press OK. 3. Use the Arrow buttons to highlight Bass & Treble and press OK. 4. Use the Arrow buttons to highlight Bass or Treble and press OK. 5. Use the Left/Right Arrow buttons to increase or decrease the level. 6. When you are finished, press EXIT. Resetting the Audio Settngs To reset the audio settings to the factory default settings: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press OK. 3. Use the Arrow buttons to highlight Reset Audio Mode and press OK. 4. The TV displays “Are you sure you want to RESET Audio Settings to the factory defaults?” Use the Arrow buttons to highlight Yes and press OK. 5. Press EXIT. Adjusting the Picture Settings Using the Picture menu, you can adjust th following settings: • Enable or disable the ambient ligh sensor • Change the picture mode • Adjust noise reduction • Adjust color temperature • Enable or disable color enhancem • Enable or disable adaptive luma • Enable or disable DCR (Dynamic Contrast Ratio) • Reset the picture mode settings Enabling or Disabling the Ambient Light When enabled, the ambient light sensor d optimize the brightness of the TV’s backlig When the ambient light sensor manually change the TV’s backlig To enable or disable the ambient light sens 1. Press the OK button on the remote. T 2. Use the Arrow buttons to highlight Pic 3. Use the Arrow buttons to highlight Am 4. Use the Left/Right Arrow buttons to 5. Press EXIT.

Your TV display can be adjusted to suit your preferences and viewing conditions. To change the picture mode: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Picture and press OK. 3. Use the Arrow buttons to highlight Picture Mode and press OK. 4. Use the Arrow buttons to highlight one of the following options, then press OK: • Home - Sets the various picture settings to values that will produce the best picture in the most cases. This is the recommended setting. • Movie - Sets the picture settings to values perfect for watching a movie in a dark room. • Game - Optimizes the picture settings for displaying game console output. • Retail - Sets the picture settings to values that produce a brighter, more vivid picture. • Custom - Allows you to manually change each of the picture settings: Backlight - Adjusts the LED brightness to affect the overall brilliance of the picture. This option is not available unless Ambient Light Sensor is set to Off. Brightness - Adjusts the black level of the picture. When this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out. Contrast - Adjusts the white level of the picture. When this setting is too high, the picture may appear dark. When this setting is too low, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difficult to distinguish in dark or bright areas of the picture. Color - Adjusts the intensity of the picture colors. Tint - Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint. Sharpness - Adjusts the edge sharpness of picture elements. It can be used to sharpen non-HD (high definition) content; however, it will not produce detail that does not otherwise exist. Adjusting the Noise Reduction Setting Noise reduction diminishes artifacts such activated, the resulting picture usually has To adjust the noise reduction setting: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Picture and press OK. 3. Use the Arrow buttons to highlight Noise Reduction and press OK. 4. Use the Arrow buttons to highlight Of Low, Medium, or High, then press OK. 5. Press EXIT.

Color temperature changes the “warmness” or “coolness” of the white areas of the picture. To adjust this setting, Picture Mode must be set to Custom. To adjust the color temperature setting: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Picture and press OK. 3. Use the Arrow buttons to highlight More and press OK. 4. Use the Arrow buttons to highlight Color Temperature and press OK. Select Normal, Cool, Warm, or Custom. If you choose Custom, you can change the individual Red, Blue, and Green gain settings. 5. When you are finished, press EXIT. Enabling or Disabling Color Enhanceme Color enhancement reduces oversaturatio tones. To adjust this setting, Picture Mo To enable or disable the color enhancemen 1. Press the OK button on the remote. T 2. Use the Arrow buttons to highlight Pic 3. Use the Arrow buttons to highlight Mo 4. Use the Arrow buttons to highlight Co 5. Use the Left/Right Arrow buttons to 6. Press EXIT. Enabling or Disabling Adaptive Luma Adaptive luma adjusts the average brightn large areas of brightness. To adjust this setting, Picture Mo To enable or disable the adaptive luma set 1. Press the OK button on the remote. T 2. Use the Arrow buttons to highlight Pic 3. Use the Arrow buttons to highlight Mo 4. Use the Arrow buttons to highlight Ad 5. Use the Left/Right Arrow buttons to 6. Press EXIT.

Dynamic contrast ratio changes contrast according to displayed content for the best picture quality. To adjust this setting, Picture Mode must be set to Custom. To enable or disable the DCR setting: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Picture and press OK. 3. Use the Arrow buttons to highlight More and press OK. 4. Use the Arrow buttons to highlight DCR. 5. Use the Left/Right Arrow buttons to change the setting to Off or On. 6. Press EXIT. Resetting the Picture Settings To restore the TV’s picture settings to the factory defaults: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Picture and press OK. 3. Use the Arrow buttons to highlight More and press OK. 4. Use the Arrow buttons to highlight Reset Picture Mode, then press OK. 5. Use the Arrow buttons to highlight YES and press OK. 6. Press EXIT. Using the Parental Controls The TV’s parental controls allow you to p channels or programs without a password Accessing the Parental Controls Menu To access the Parental Controls menu: 1. Press the MENU button on the remote 2. Use the Arrow buttons on the remote 3. Enter your parental passcode. If you h default, 0000. The Parental Controls m To set a custom parental passco Control Passcode on page 30. Enabling or Disabling Program Ratings To manage program content according to i Rating feature. To enable or disable the Program Rating fe 1. From the Parental Controls menu, high The Rating Enable menu is displayed. 2. Select On or Off and press OK.

When a channel is locked, it will be inaccessible. Locking a channel is a good way to prevent children from viewing inappropriate material. To lock or unlock a channel: 1. From the Parental Controls menu, highlight Channel Locks and press OK. The Channel Locks menu is displayed. 2. Highlight the channel you want to lock or unlock and press OK. 3. When a channel is locked, the Lock icon appears locked. The channel is not accessible unless the parental passcode is entered. 4. When a channel is unlocked, the Lock icon appears unlocked. The channel is accessible. Blocking and Unblocking Content by Ra A channel may sometimes broadcast prog at other times broadcast programs that are not want to block the channel completely u to block certain programs from being view When this is the case, you can use the TV’s based on its rating. For a list of content ratings and t www.tvguidelines.org. To block or unblock content by its rating: 1. From the Parental Controls menu, high adjust and press OK: USA - TV - USA television program br USA - Movie - USA movie broadcasts CAN - English - Canadian English tele CAN - French - Canadian French tele 2. For each rating type you want to block Left/Right Arrow buttons on the remo press OK. 3. When the rating type is blocked, the L with this rating cannot be viewed. 4. When the rating type is unblocked, th Content with this rating can be viewed 5. If you want to block all unrated conten and use the Arrow buttons on the rem 6. When you are finished adjusting the ra button on the remote.

WARNING: If you set User Control Lock to On and you lose your TV’s remote control, you will be unable to use the buttons on the TV. Please use caution when setting this lock. You can lock the buttons on the side of the TV so that the TV can only be controlled by the remote. To lock or unlock this setting: 1. From the Parental Controls menu, highlight User Control Lock and press OK. 2. Highlight Off or On and press OK. When this setting is On, the buttons on the side of the TV will not function. When this setting is Off, the buttons on the side of the TV will function. 3. Press Exit. Changing the Parental Control Passcode If you use the parental controls, you should change the passcode to prevent children from accessing inappropriate material. 1. From the Parental Controls menu, highlight More and press OK. 2. Highlight Change PIN and press OK. The Change PIN menu is displayed. 3. In the New Pin field, use the Number Pad on the remote to enter your new 4-digit parental control passcode. If you have not yet set a passcode, enter the default, 0000. 4. In the Confirm Pin field, use the Number Pad on the remote to re-enter your new 4-digit parental control passcode. 5. Write down your new parental control passcode and save it in a secure location. 6. Press the EXIT button on the remote. Resetting the Content Locks To reset the content locks to the factory-de 1. From the Parental Controls menu, high Change PIN menu is displayed. 2. Highlight RESET LOCKS and press O you want to RESET ALL LOCKS SETT 3. Highlight Yes and press OK.

You can use the TV’s Help menu to: • Display system information • Restore the TV to its factory default settings • Restart the Setup Wizard Displaying System Information To display a summary of the TV settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the Help icon and press OK. The Help menu is displayed. 3. Highlight System Info and press OK. The system information is displayed. 4. When you are finished reviewing the system information, press the EXIT button on the remote. Restoring the TV to the Factory Default Settingss All of the on-screen menu settings can be reset to the factory defaults. If you restore the TV to the factory default settings, all changes you have made to the settings will be lost! To restore the TV to its factory default settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the Help icon and press OK. The Help menu is displayed. 3. Highlight Reset All Settings and press OK. The TV displays, “Are you sure you would like to Restore Defaults? This will erase any custom settings.” 4. Highlight Yes and press OK. 5. Press EXIT. Restarting the Setup Wizard The TV’s Setup App can be used to easily To access the Setup App: 1. Press the MENU button on the remote 2. Use the Arrow buttons on the remote OK. The Help menu is displayed. 3. Highlight Start Setup Wizard and pre 4. Use the Number Pad to enter your pa your PIN, enter 0000. 5. The TV displays, “Are you sure you wa Highlight OK and press OK.

Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. If the program you are viewing is not being broadcast with closed captions, the TV will not display them. To activate or deactivate closed captions: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the CC icon and press OK. The Closed Caption menu is displayed. 3. Use the Arrow buttons on the remote to highlight the type of closed captions you wish to see: • Analog Closed Caption for analog (NTSC) TV channels. • Digital Closed Caption for digital (ATSC) TV channels. 4. After highlighting the type of closed captions you wish to see, use the Arrow buttons on the remote to select the caption channel you wish to display, then press OK. Caption channels usually display different languages. For example, CC1 may display English captions and CC2 may display Spanish captions. Changing the Appearance of Digital Clo Digital closed captions can be displayed a To change the appearance of digital closed 1. From the Closed Caption menu, use the Arrow buttons to highlight Digital Caption Style. 2. Use the Left/Right Arrow buttons on the remote to select Custom, then press OK. The Digital CC Style menu appears. 3. Use the Up/Down Arrow buttons on the remote to highlight the setting you wish to change, then use the Arrow buttons to change the setting: • Caption Style - Choose a custom preset caption style. • Text Size - Adjust the size of the text. • Color - Change the color of the text. • Opacity - Change the transparency of the text. • BG Color - Change the background color. • BG Opacity - Change the transparency of the background. • Window Color - Change the edge color. • Window Opacity - Change the edge type. • Reset Default - Restore closed caption settings to factory default 4. When you are satisfied with the appea captions, press the EXIT button on th

defect. If you are experiencing a problem when using your TV, try to fix the issue using this troubleshooting guide. If, after using this troubleshooting guide, you are still experiencing an issue with your TV, contact VIZIO’s Support Department. Quality customer support and service are integral parts of VIZIO’s commitment to service excellence. The TV displays “No Signal.” • Press the INPUT button on the remote control to select a different input source. • If you are using cable TV, satellite, or antenna connected directly to the TV, scan for channels. See Scanning for Channels on page 13. There is no power. • Ensure the TV is plugged into a working electrical outlet. • Ensure the power cable is securely attached to the TV. • Press the Power/Standby button on the remote or press the Power/ Standby button on the side of the TV to turn the TV on. The power is on, but there is no image on the screen. • Ensure all cables are securely attached to the TV. • Ensure all devices are connected correctly. Devices differ; see your device’s user manual for details. • Adjust Brightness, Contrast, or Backlight. See Scanning for Channels on page 13. • Press the INPUT button on the remote to select a different input source. There is no sound. • Press Volume Up on the remote c • Press the MUTE button on the re • Check the audio settings. Ensure • Ensure no headphones are conne • Check the audio connections of e game console, cable/satellite box • If you are using an antenna, the s low. Ensure your antenna is conn the antenna around the room or c The colors on the TV don’t look right. • Adust the Color and Tint settings for Channels on page 13. • Reset the picture settings. • Check all cables to ensure they a The buttons on the remote aren’t work • Ensure you are only pressing one • Point the remote directly at the T • Replace the remote batteries with Batteries on page 7. The image quality is not good. • For the best image quality, view h sources. Connect your devices w • If you are using an antenna, the s low. Ensure your antenna is conn the antenna around the room or c Phone: (877) 698-4946 Fax: (949) 585-9563 Email: [email protected] Web: www.VIZIO.com Hours of operation: Monday - Friday: 6 am to 9 pm (PST) Saturday - Sunday: 8 am to 4pm (PST) Troubleshooting & Technical Support

• Nearby electrical devices may be interfering with the TV. Separate the TV from electrical appliances, cars, or flourescent lights. • Ensure all cables are securely attached. The display image does not cover the entire screen. • If you are in RGB mode (computer), ensure that H-Size and V-Position in the on-screen menu are set correctly. • If you are using TV, AV1, AV2, or Component with 480i input, press the WIDE button on the remote to change the screen mode. The TV has pixels (dots) that are always dark or always lit. • Your HDTV is precision-manufactured using an extremely high level of technology. However, sometimes pixels may not display correctly. These types of occurences are inherent to this type of product and do not constitute a defective product. I see “noise” or static on the screen. • When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image. • If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal. When I change input source, the volume changes. • The TV remembers the volume level on each input source. If the volume level on the new input source is higher or lower than the level on the source you switch from, the difference may be noticable. • Use the Volume Up/Down buttons on the remote to adjust the volume. When I change input source, the displa • The TV remembers the viewing m viewing mode on the new input s input source you switch from, the • See Viewing a USB Photo Slides

w/o Stand: 30.39 x 20.79 x 6.34” 30.39 x 19.21 x 2.13” Weight w/ Stand: w/o Stand: 16.67 lbs 14.66 lbs TV Type: Edge-Lit LED Refresh Rate: 60 Hz Maximum Resolution: 1920 x 1080 Pixel Pitch: 0.3635 mm x 0.3635 mm Dynamic Contrast Ratio: 100,000:1 Viewing Angle: 178 (H) x 178 (V) Response Time: 8.5 ms Brightness: 400 nits HDMI Inputs: 3 Component Video Inputs: 1 Composite Inputs: 1 RF/Coaxial Input: 1 USB Ports: 1 RGB Inputs: 1 (with 3.5mm Audio In) OSD Language: English, Spanish, French Audio Outputs: Optical Digital Audio Out, 3.5mm Stereo Number of Speakers 2 Watts/Channel 10W Simulated Surround: SRS TruSurround HD, Dolby Digital Sound Leveler: Ambient Light Sensor: Compliance: Power Consumption: Voltage Range: Standby Power: Operating Temperature: Non-Operating Temperature: Operating Humidity: 10 - 9 Non-Operating Humidity: 10 - 7 Specifications

Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion. To obtain warranty service, contact VIZIO Technical Support via e-mail: [email protected] or via phone at 877 MY VIZIO (877.698.4946) from 6:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period. Parts and Labor There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater. Type of Service Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE. Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center. Limitations and Exclusions VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one y Products sold “AS IS”, “FACTORY RECERT THERE ARE NO EXPRESS WARRANTIE DESCRIBED ABOVE. ANY IMPLIED WAR WARRANTY OF MERCHANTABILITY A PURPOSE, SHALL BE LIMITED IN DURA FORTH ABOVE. VIZIO’S TOTAL LIABILIT DAMAGES RESULTING FROM ANY CAUS NEGLIGENCE, ALLEGED DAMAGE, OR D DEFECTS ARE DISCOVERABLE OR LATEN PURCHASE PRICE OF THE PRODUCT. V FOR LOSS OF USE, LOSS OF INFOR LOSS, LOST REVENUE OR LOST PRO CONSEQUENTIAL DAMAGES. SOME ST ON HOW LONG AN IMPLIED WARRAN INCIDENTAL OR CONSEQUENTIAL DAM OR EXCLUSIONS MAY NOT APPLY TO SPECIFIC LEGAL RIGHTS, AND YOU MAY VARY FROM STATE TO STATE. THIS WA WITHOUT NOTICE. CHECK WWW.VIZIO.COM FOR THE MOS Personal Data If your VIZIO product is capable of storing pe CONTENTS AND INFORMATION WILL BE IN-HOME AND ALL SHIP-IN WARANTY SE be restored to you configured as originally restoring all applicable data and password data is not covered under this Limited War information, VIZIO recommends that you from the unit before it is serviced, regardle Zero Bright Pixel Defect Guarantee This policy covers “zero bright pixel” de “ONE YEAR WARRANTY” on select new this guarantee applies to your product, ref product information page (www.VIZIO.co guarantee on the box.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment. Caution Always use an AC/DC power adapter that i listed below for each area. USA: UL Canada: CSA Germany: VDE UK: BASE/BS Japan: Electric Appliance Control Ac Open Source Software Notice Your VIA device may contain GPL executab to the PL2.0/LGPL2.1 License Agreements to you on CD-ROM for a processing fee distribution, such as the cost of media, ship to VIZIO at www.VIZIO.com. This offer is valid for a period of three (3) ye this VIA device by VIZIO. You can obtain a copy of the GPL, LGPL li http://www.gnu.org/licenses/old-licenses/g and http://www.gnu.org/licenses/oldlicenses/lg You can also obtain a copy of gSOAP pub http://www.cs.fsu.edu/~engelen/license.ht Please visit www.VIZIO.com for attributio software on your VIZIO VIA device. Permission is hereby granted, free of charge such software and associated documentat to deal in the Open Source Software withou the rights to use, copy, modify, merge, pub copies of the Open Source Software, and Source Software is furnished to do so, sub THE SOFTWARE IS PROVIDED “AS IS”, W EXPRESS OR IMPLIED, INCLUDING BUT OF MERCHANTABILITY, FITNESS FOR A P FRINGEMENT. IN NO EVENT SHALL THE A BE LIABLE FOR ANY CLAIM, DAMAGES O ACTION OF CONTRACT, TORT OR OTHE IN CONNECTION WITH THE SOFTWARE IN THE SOFTWARE. Legal & Compliance

Entertainment Freedom and Entertainment Freedom for All names, logos and phrase are registered or unre of VIZIO, Inc. Other logos and trademarks are the property of their respective owners. Subject to chang 110307ST-NC