Vodafone 3G Configuration Manual

THE 3G BROADBAND ROUTER System Requirements Ensure the Vodafone Mobile Connect U740 datacard is inserted into the router before plugging in the power supply. Setting network preferences Connect one end of the supplied Ethernet cable into your network card/notebook and the other into one of the ports numbered 1 - 4 as highlighted below ...

select your time zone from the drop-down box as below: Select the “3G/UMTS Network” tab – this will allow you to configure settings such as Auto Connect and view details of your card: Select the “Wireless” tab. If you wish to use WiFi change your SSID (th ...

Important: If you are going to have WiFi enabled on your router it is highly recommended that you also setup wireless security. To enable and setup wireless security select the “Wireless Security” tab and select “WEP” from the drop-down box (this is the most common form of Wireless security used). A new window will now o ...

router by double-clicking on it. You will now be prompted for the WEP key you setup previously, you will need to enter the key twice and select “Connect”. Your connection will now be setup and you will be able to access the router’s web interface and conn ...

through WiFi (Macintosh) Firstly ensure your router is powered up and you have followed all the steps required to configure and enable WiFi. Check that wireless is both installed and enabled on your Mac. To check you will need to click on the Wireless icon and select “Turn Airport on”. Your Mac should automatically ...

the internet or your work network. To change the APN, you will first need to log into the routers web interface. Select the “3G/UMTS Network” tab: Under “APN Selection Mode” select “Custom Values”. You will now see three new fields appear ...