VTech MI6866 Quick Start Manual

Make sure your phone’s packaging includes the following: STEP 3 Battery installation 1. Align the two holes in the plug with the socket pins, then snap the plug into place. Place the battery in the compartment with the wires in the upper right corner. 2. Replace cover by sliding it upwards until it clicks into place. STEP 4 Charge the battery 1. Place the handset in the base unit/chargers. 2. Charge the battery for at least 16 hours before first use. Quick Start Guide mi6896/6870/6866 STEP 2 Connect power to telephone base/ chargers Plug the power adaptor into an electrical outlet not controlled by a wall switch, and the connector into the power jack on bottom of the telephone base/chargers. NOTE: • Use only the power adaptors supplied with your VTech telephone. STEP 5 Connect to phone line Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone base. Then plug the other end of the cord into the wall telephone outlet. AC power outlet Telephone outlet STEP 6 Making and receiving calls Making a call • Press or SPEAKER and listen for dial tone. STEP 7 Set the Clock 1. Press TIME/SET to listen to the current setting. 2. Press TIME/SET again to indicate changes needed. 3. Press CHANGE to change the day, hour, minute, or year. 4. When you hear the correct setting, press TIME/SET to advance to the next setting. Hanging up Press OFF or place the handset in its base. IMPORTANT! If your product is not working properly: 1. Refer to your user’s manual. 2. Visit our website at www.vtechphones.com or in Canada, www vtechcanada.com. 3. Call our customer service at 1-800-595-9511 or 1-800-267 7377 in Canada. NOTE: If you have caller ID service, the time will automatically be updated with the first incoming call after you program the year into the system. NOTE: For complete feature instructions, please refer to your user’s manual. AC power outlet STEP 8 Record your outgoing announcement 1. Press SETUP, the system announces “Announcement. Press PLAY or press RECORD. To continue setup, press SETUP.” 2. Press REC/MEMO and speak toward the MIC on the base to record an announcement for up to 90 seconds. 3. Press PLAY/STOP / ( when finished recording). • Dial the phone number. -OR- • Dial the phone number. • Press . Receiving a call Press , SPEAKERPHONE, or any dialing key except OFF. Base unit Handsets (4) Telephone line cord Base power adaptor Quick start guide Belt clips (4) User’s manual Wall mount bracket Batteries (4) Charger power adaptors (3) Chargers (3) 96-006101-030-000 STEP 1 Check package contents (mi6870) Make sure your phone’s packaging includes the following: Base unit Handsets (2) Telephone line cord Base power adaptor Quick start guide Belt clips (2) User’s manual Wall mount bracket Batteries (2) Charger power adaptor Charger STEP 1 Check package contents (mi6866) Make sure your phone’s packaging includes the following: Base unit Handset Telephone line cord Base power adaptor Quick start guide Belt clip User’s manual Wall mount bracket Battery