TAG 20 Operator's Manual

frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. This Transmitter must n ...

7-3 Taking Care of the Tablet PC Location Guidelines z Use the computer where the temperature is between 10 °C (50 °F) and 35 °C (95 °F). z Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. z Do not cover or block any ventilation openings on the computer. For example, do not place the computer on a bed, sofa, rug, or other similar surface. Otherwise, overheating may occur that results in damage to the computer. z Keep the computer at least 13 cm (5 inches) away from electri ...

z Adjust the playback or recording sound levels. The external microphone or audio device does not work. z Make sure that the microphone is connected to the proper connector on the computer. z Make sure that your computer is equipped with the driver needed. z Click the speaker symbol on the taskbar and check the Windows volume control. z Check the volume control of your computer. Startup Problems When you turn on the computer, it does not respond and the Power Indicator does not appear. z If you are using an external AC power, make sure tha ...

encounter any problem: z Try to isolate which part of the computer is causing the problem. z Make sure that you turn on all peripheral devices before turning on the computer. z If an external device has a problem, make sure that the cable connections are correct and secure. z Make sure that the configuration information is properly set in the SCU program. z Make sure that all the device drivers are correctly installed. z Make notes of your observations. Are there any messages on ...