Epson EMP MONITOR OPERATION V4.30 Operation & User’s Manual

36 C Click "Notification event" and check the items for mail notification in the window that appears. D Click "OK". The Set mail notification function window appears again. Repeat Steps 3 and 4 to set the notification events to be notified. E When the setup is complete, click "OK". ...

37 E-mail notification of problem/warning/status If the projector experiences a problem or enters a status requiring attention, an e-mail like that shown below is sent to the address specified for Recipient mail address. If there is more than one problem, warning, or status, the corresponding messages are output to separate lines. The details contained in the e-mail message can consist of the following. Item Details shown E-mail subject [Display name displayed in Grouping view or Detail list view] Projector status notification Body

36 C Click "Notification event" and check the items for mail notification in the window that appears. D Click "OK". The Set mail notification function window appears again. Repeat Steps 3 and 4 to set the notification events to be notified. E When the setup is complete, click "OK". ...

27 B Select "Resident in the task tray". C Click "OK". • Right-click the icon in the system tray to open a pop-up menu to select the Open the main screen or Exit. • If Register at start up in the Environment set up is selected, EMP Monitor starts automatically when the computer's power is turned on. When using EMP Monitor under Windows Vista, you must have administrator authority in order to use this function. Displaying projectors with problem or warning statuses in a list You can display a list of only the projectors which have a problem or warning status. Proced ...