Teac FD-235 Series Installation Manual
Text of the manual
TEAC FD-235 Series
3 1/2" 1.44 MB Floppy Disk Drive
Installation Guide
3 1/2'' diskette
insertion window
Activity indicator
Eject Button
Your FD-235 package includes:
* FD-235 3 1/2" floppy disk drive
* Installation Guide
Introduction
Thank you for purchasing the TEAC FD-235 Series 1.44 MB floppy disk
drive. This product is intended for use in IBM PC/AT com
Preparing your Personal computer for FD-235 Floppy Drive Installation
1. Unplug your computer from the power source.
2. Remove cover from your computer. Refer to your computer system
manual for this procedure.
3. If you are replacing a current floppy, note the cables that are connected
to your floppy disk drive, as these same cables will be required to in
Configuring for A: or B: drive
Use a standard IBM PC compatible cable with a twist at the end connector
(Figure B) to complete installation. Cable’s colored-line denotes Line 1 to
match to Pin 1 on drive and motherboard’s connectors.
a. To configure as your A: drive, connect the FD-235 Series floppy drive to
Connector A: on the flat “ribbon” cable
TEAC Tech Support: If you have questions on the floppy installation, please
contact us:
Phone: 323-727-4860
Fax: 323-869-8751
Email: [email protected]
Hours: M-F 8am-5pm PST
Website: www.teac.com/DSPD/techsupport.htm
*IBM PC/AT are registered trademarks of International Business Machines Corp.
Rev. TRG 2/02
Symptom
Indicator light never turns on when
execut
