Epson CPD-17904 Operation & User’s Manual

any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Epson is a registered trademark of Seiko Epson Corporation. Epson Extra Care, Epson Connection and Epson Store are service marks, and PrivateLine and PowerLite are registered trademarks of Epson America, Inc. Pixelworks, DNX, and the DNX logo are trademarks of Pixelworks, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. © 2004 Epson America, Inc. 2/04 CPD-17904

5 Remote Control Information 6 Presenting the Epson PowerLite Home 10+ 7 Registration and Warranty 7 Projector Parts 8 Projection Controls 9 Using This Manual 10 Getting More Information 10 Supported Devices 11 Cable Requirements 11 Optional Accessories 12 Using the Projector 13 Choosing a Location 13 Adjusting the Picture 14 Adjusting the Volume 16 Turning Off the Picture and Sound 16 Freezing the Action 16 Using the Projector’s Menu System 17 Changing Menu Settings 17 Adjusting the Appearance of the Picture 18 Customizing Projector Operation 20 Repositioning the Picture 22 Viewing Lamp Usage and Other Information 23 Restoring the Default Settings 24 English

25 Cleaning the Lens 25 Cleaning the Projector Case 26 Changing the Remote Control’s Battery 26 Cleaning and Replacing the Air Filter 27 Replacing the Lamp 28 Resetting the Lamp Timer 30 Storing the Projector 30 Transporting the Projector 30 Problem Solving 31 What To Do When the Lights Flash 31 Solving Picture Problems 32 Solving Remote Control Problems 36 Where To Get Help 36 Specifications and Notices 37 General 37 Projection Lamp 37 Remote Control 37 Dimensions 38 Electrical 38 Environmental 38 Safety 38 Compatible Video Formats 39 FCC Compliance Statement 40 Declaration of Conformity 41 Epson America, Inc. Limited Warranty 41 Index 43

Follow these safety instructions when setting up and using the projector: ■ Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■ Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. ■ Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. ■ The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. ■ Don’t place the projector on an unstable cart, stand, or table. Also, don’t use the projector near water or sources of heat. ■ Use the type of power source indicated on the projector. If you’re not sure of the power available, consult your dealer or power company. ■ Place the projector near a wall outlet where the plug can be easily unplugged. ■ Don’t insert the plug into an outlet with dust present, and insert the plug firmly into the outlet. Failure to do so could result in sparks or fire. ■ Don’t overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock. ■ Don’t block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Don’t operate the projector on a sofa, rug, or other soft surface, or in a closed-in cabinet unless proper ventilation is provided. ■ Never push objects through the cabinet slots or spill liquid into the projector. ■ Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: when the power cord or plug is damaged or frayed; if liquid has been spilled into the projector, or if it has been exposed to rain or water; if it doesn’t operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service; if it has been dropped or the housing has been damaged. ■ Don’t place the projector where the cord can be walked on. This may result in fraying or damage to the plug.