Technics SL-1200MK5 Operating Instructions Manual

this product. For optimum performance and safety, please read these instructions carefully. SL-1200MK5 : Silver model SL-1210MK5 : Black model Supplied accessories ................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ....................................... 3 Features ......................................................................................... 4 Preparation of the cartridge ........................................................ 4 Controls ......................................................................................... 4 Putting the player together ......................................................... 5 Connections and installation ...................................................... 5 Connecting to an amplifier and AC power supply cord ............. 5 Connecting to an Audio Mixer (not included) ............................ 6 Installation .................................................................................. 6 Preparatory adjustments ............................................................. 6 Horizontal balance and stylus pressure .................................... 6 Anti-skating ................................................................................ 7 Armlift height .............................................................................. 7 Tone arm height ......................................................................... 7 Fit the dust cover ....................................................................... 7 Playing records ............................................................................. 8 Adjustments while using the unit ............................................... 9 Pitch control ............................................................................... 9 Adjusting the turntable brake speed .......................................... 9 Maintenance ................................................................................ 10 Product service ........................................................................... 10 Troubleshooting guide ................................................................ 11 Specifications .............................................................................. 11 User memo: DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER SL-1200MK5 / SL-1210MK5 SERIAL NUMBER WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. [] Please check and identify the supplied ac- cessories. Use numbers indicated in parentheses when asking for replacements parts. (Only for U.S.A.) To order accessories contact 1-800-332-5368 or the website (http://www.panasonic.com). [] Turntable ................. 1pc. (SFTE172-01Z1) [] Turntable mat .......... 1pc. (RGS0008) [] Balance weight ....... 1pc. (SFPWG17201K) [] Auxiliary weight ...... 1pc. (SFPWG17202) @ [] Disc slip sheet set (RGS0005Z-1) ................ 1 • Disc slip sheet • Transparent sheet [] Dust cover ............... 1pc. [] EP record adaptor (SFWE010) ............... 1pc. G [] Shell weight ............ 1pc. (SFPZB3501) [] Overhang gauge ..... 1pc. (SFK0135-01) [] Head shell (SFPCC31001K) ...... 1pc. [] Screw set for cartridge ........................................ 1 • Nuts(RHN26003) • Screws-short(SFCZV8801-1) • Screws-long(SFPEV9801-1) • Washers(SFPEW9601) [] Sticker ...................... 1pc. (RQLC0142_ CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. The following mark and symbols are located on the bottom of the unit. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock persons. ,_The point an equilateral triangle exclamation within is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat reg- isters, stoves, or other apparatus (including amplifiers) that pro- duce heat. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normal- ly, or has been dropped. 9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particu- larly at plugs, convenience receptacles, and the point where they exit from the apparatus. THE FOLLOWING APPLIES ONLY IN THE U.S.A. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: eReorient or relocate the receiving antenna. elncrease the separation between the equipment and re- ceiver. eConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. eConsult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RQT7018

the range maintaining perfect accuracy, ° Pitch can be instantly reset to the rated speed (33 1/3 or 45 r/min) with the reset button. The direct drive produces high torque. °Wow and flutter below 0.01%. Starting torque of 1.5 kg-cm en- abling the turntable to reach 33 1/3 r/min in 0.7 seconds. ° Smooth stops are achieved with a fully electronic braking system. The braking speed can be adjusted with the brake speed control knob. Tone arm with gimbal suspension ° Using the balance weight control measurement units on the tone arm, you can quickly change stylus pressure settings to the appro- priate pressure. ° Stylus skipping can be reduced using horizontal weight control for scratch play. °The tone arm can be finely adjusted in a range of 6 millimeters with the Iockable height control. Anti-vibration design with 3 layer cabinet construction and large insulating legs. Pop-up stylus light. °A light illuminates the stylus. 1 Attach a cartridge (not included). Follow the cartridge's instructions to correctly attach it to the head shell. • Use the included shell weight when using a light cartridge (3.5 to 6.5 grams). Screws Shell weight Head shell Lead wire Terminal Cartridge 2 Stylus Adjust the overhang. Fit the included overhang gauge to the head shell. Adjust the overhang and facing of the cartridge and tighten the screws. ° Line the stylus tip up with the end of the gauge. °The cartridge should be parallel on the shell head. Screws Stylus tip 52 mm Overhang gauge ® ® ® @ ® @ No. Name Reference page(s) EP record adaptor ........................... 8 @ Turntable base .............................. 4 ® Turntable mat (Or disc slip sheet) .............. 5 @ Turntable ................................... 5 ® Center spindle .............................. 5 ® Strobe mirrors .............................. 9 Power switch (power) ........................ 8 ® Strobe light, pilot lamp ....................... 8 @ Start-stop button (start-stop) .................. 8 @ Speed select buttons (33, 45) .................. 8 @ Shell stand ................................. 4 @ Arm-height control ........................... 7 ® Balance weight .............................. 5 ® Stylus pressure control ....................... 6 @ Arm lock ................................... 7 ® Anti-skating control .......................... 6 @ Cue lever ................................... 6 @ Arm clamp .................................. 6 @ Arm rest .................................... 6 ® Tone arm ................................... 5 @ Pitch indicator .............................. 9 @ Pitch control (pitch adj.) ...................... 9 @ Reset button (reset) .......................... 8 ® Locking nut ................................. 5 @ Head shell .................................. 5 ® Stylus light switch ........................... 8 @ Stylus light ................................. 8

during shipping some of the equipment has been disassembled. Put the player together in the following order. • Do not connect the AC power supply cord until set up is complete. • Leave the dust cover off until set up and adjustments are com- plete. Turntable mat Turntable 1 2 Fit the turntable and turntable mat. Put the turntable on the center spindle and then lay the mat on top. • Be very careful when putting the turntable on the main unit. The magnet on the bottom of the turntable is finely adjusted and sharp contact can cause it to move and lead to poor operation. Ensure the magnet remains free from dust and iron particles. • Do not adjust the screws attaching the magnet to the turn- table. The rated performance of the unit cannot be guaran- teed if the magnet is moved. Attach the head shell. Fit the head shell into the tone arm, keep it horizontal and tighten the locking nut. Locking nut Head shell Center spindle Screws Tone arm 3 Attach the balance weight to the rear of the tone arm. If the cartridge weighs between 10 and 13 grams, attach the included auxiliary weight to the main balance weight. Balance weight Auxiliary weight ,. j 1. Connect the PHONO earth lead and stereo PHONO cables to the amplifier PHONO terminals. Stereo connection cable White (L) Red (R) • If the earth lead isn't connected, a hum will be heard from the AC power source. • You will not have adequate volume or sound quality if connect- ing to an amplifier that has no PHONO terminals. 2. Connect the AC power supply cord. • Connect this cord only after all other connections are complete. • Confirm the wattage of AC outlets on amplifiers and receivers before using them for this unit. This unit consumes 13.5 W. This unit To household AC outlet --2 Amplifier (not included) (I Earth lead I Stereo connection cable 11"1 RQT7018

nections. • Reconnect the AC power supply cord after all other connections are complete. Unit _ Unit Earth lead (L) Audio mixer • Install the unit on a horizontal surface protected from vibrations. • Keep this unit as far as possible from speakers. • Ensure the unit is not exposed to direct sunlight, dust, humidity, and heat from a heating appliance. • This unit may pick up interference from a radio if there is one nearby. Keep radios as far as possible from this unit. Adjusting the height of the insulators Place the unit where it is to be used and adjust the height of the legs to make the unit horizontal. 1 2 Release the tone arm. 1. Remove the stylus cover, taking care not to dam- age the stylus, then release the arm clamp. 2. Free the tone arm from the arm rest. __X._l_. _Arm clamp Adjust horizontal balance 1. Push the cue lever down. 2. Turn the anti-skating control to "0". 3. Turn the balance weight until the arm is approxi- mately horizontal. Take care at this time not to allow the stylus to touch the unit. f O ............................. _ Balanced //////////,)_///// (_ Too far forward (_) Too far back i Arm clamp Arm rest Cue lever Anti-skating control 3 4 Turn the stylus pressure control to "0" 1. Return the tone arm to the arm rest and fix it with the arm clamp. 2. Turn the stylus pressure control to "0". Hold the balance weight still while doing this. |# Balance weight I/ r._/Turn stylus Center line I_ pressure L.I control Arm clamp Adjust stylus pressure Turn the balance weight to adjust to the appropri- ate pressure for the cartridge you are using. See the cartridge's instructions for recommended stylus pres- sure. The stylus pressure control will turn at the same time. Stop when the center line points to the required pressure. Center line Turn balance weight /

control Make note of the balance weight setting for your stylus cartridge, you can quickly change the stylus pressure without having to re- adjust the horizontal balance of the arm each time you remove and re-attach the stylus cartridge. (_ Attach the cartridge to the tone arm you are using. (_) Turn the balance weight control to the setting you previously used to balance the weight including cartridge. (_) Turn the stylus pressure control dial to the setting you previ- ously used to balance the weight including cartridge. /I ght measurement units Adjust the dial to the same value as the stylus pressure control when playing normal music. For scratch play Adjust the control to reduce skipping. ,... J 1. Release the arm lock. Released 1 2. Adjust the arm height. • Adjust the ring using the chart below as reference so the arm height matches the indicated height of the cartridge. Mea- surements are marked on the arm height control ring in 0.5 millimeter intervals. Index line Arm height control ring Cartridge height (H) in millimeters 17 18 19 20 21 22 23 Height control position 0 1 2 3 4 5 6 • If you do not know the height of your cartridge, rest the stylus on a record and adjust the height control until the tone arm and record are parallel. Tone arm and record parallel. _ 3. Lock the arm after adjusting the height. Preparation 1. Put a record on the turntable. 2. Take off the stylus cover and release the arm clamp. Use a screwdriver to turn the armlift screw. Make this adjustment only if the cartridge you are using makes it necessary. • Turning the screw clockwise lowers the armlift. • Turning the screw anti-clockwise raises the armlift. Hold the dust cover with both hands and fit it over the player from directly above. \ Armlift screw Armlift Armlift height (the distance between the record and stylus when the cue lever is raised) is set to between 8 and 13 millimeters at time of shipment. mm RQT7018

2. Take off the stylus cover and release the arm clamp. 3 1 2 Turn [power] to turn the unit on. • The pilot lamp comes on. • 33 1/3 r/min is automatically selected and the indicator lights. • Press [45] if you are playing a 45 r/min record. Press [start-stop]. The turntable starts revolving. 2 To temporarily stop play Lift the cue lever. The stylus lifts off the record. Refer to page 9 for fine adjustments to the pitch When using EP records EP record adaptor_" _,,_7-_, 1. Take the EP record adaptor out of its holder and fit it over the center spindle. 2. Press [45] to change the speed. When play finishes 1. Lift the cue lever and move the tone arm back to the arm rest. 2. Press [start-stop]. The electronic brake gently stops the turntable. 3. Turn [power] to turn the unit off. 4. Clamp the tone arm and put the stylus cover back on. When the player is to be used for scratch play. Use the disc slip sheet instead of the turntable mat. This enables 3 Press [reset] to light the pitch control green LED lamp. The pitch returns to 33 1/3 or 45 r/min. Use the above indicated Green pitch for playing standard LED indicator music. reset the record to be easily moved during play. • Top (printed side): Lay the record on this side. • Bottom: Slippery side. 4 5 Lift the cue lever and move the tone arm over the record, "6o- o ooo Lower the cue lever. The tone arm moves down and play starts. For a different kind of slip Put the transparent sheet under the disc slip sheet. Disc slip sheet _arent sheet To light up the stylus • Press the stylus light switch. The stylus light rises up and illumi- nates the stylus. • When the light is not required, press it down. The light also goes out. Press the switch firmly. If the switch is lightly pressed, the light may come on but not rise up. Stylus light Stylus light switch

of revolutions per minute. 1 Press [reset] to turn off the green LED light. Green LED indicator Pitch control reset pitch adj. Brake speed can be adjusted by pressing [start-stop] until the turn- table stops. Use a small screwdriver in the hole on the turntable to adjust the brake speed. S: Slow stop F: Fast stop 2 Slide [pitch adj.] while the turntable is revolving. Move the control to the required position. ,,The numbers represent approximate percentages. • Pitch can be adjusted between -8 % and +8 %. To reset pitch to the preset value Press [reset]. The green LED indicator lights and the pitch immediately returns to the set value (33 1/3 or 45 r/min), regardless of any adjustments made with [pitch adj.]. Press [reset] again and pitch returns to the adjusted value. To measure pitch The four rows of strobe mirrors around the edge of the turntable can assist you in measuring pitch. +6.4 % change in pitch when stationary +3.3 % change in pitch when stationary --- Normal turntable speed when stationary l-- -3.3 % change in pitch when stationary They are lit by the strobo light as they pass and each row appears to stand still at a different pitch. ___ Strobolight • 032 "-< Read the pitch control slider replacement instructions that comes with this product carefully when replacing the pitch control slider. RQT7018

To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner, or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. Do not wipe the dust cover while playing a record. This can cause static electricity. This static can cause the tone arm to be attracted towards the cover. Thoroughly clean dust off the stylus and record. • Use a soft brush to clean the stylus. Brush from the base to the tip. • Use a good quality record cleaner to keep your records clean. Wipe the head shell terminals occasionally. Use a soft cloth. Turn the amplifier off before fitting or removing the head shell. • Damage to your speakers can occur if the head shell is moved while the volume is turned up. • Leave the stylus cover on while handling the head shell to prevent damaging the stylus. Oiling the center spindle. Apply 2 or 3 drops every 2000 hours of operation. Use SFW0010 oil (not included). Moving the unit Repackage the unit in the packaging it came in. If you no longer have the packaging, do the following: • Return the tone arm to the arm rest and tape it in place. • Remove the balance weight and head shell from the tone arm and carefully wrap them. • Take off the turntable and turntable mat and carefully wrap them. • Carefully wrap the main unit in a blanket or paper. 1. Damage requiring service--The unit should be serviced by qualified service personnel if: (a)The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing--Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servic- ing to authorized servicing personnel. 3. Replacement parts--When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety check--After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. Product information For product information or assistance with product operation: In the U.S.A., contact the Panasonic Customer Call Center at 1- 800-211-7262, or e-mail [email protected], or the website (http ://www.panasonic.com). In Canada, contact the Panasonic Canada Inc. Customer Care Cen- tre at 905-624-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.

If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or the website (http://www.panasonic.com). In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you. Reference Problem Probable cause(s) Suggested remedy page(s) No power. Is the AC power supply cord plugged in? Plug the cord in firmly. 5 There is power but no sound. Are connections to the amplifier/receiver's Connect the stereo pin cables to the amplifier's 5 Sound is weak. PHONO terminals correct? PHONO terminals. Left and right sounds are re- Are the stereo connection cable connections Double check all connections. versed, to the amplifier or receiver reversed? 5 Humming heard during play. Are there other appliances or their AC power supply cords near the stereo connection cable? Is the earth lead connected? Separate the appliances and their AC power supply cords from this unit. Make sure the earth lead is correctly con- nected. Turntable section Type Drive method Motor Turntable platter Turntable speeds Variable range pitch Starting torque Build-up characteristics Braking system Wow and flutter Rumble Quartz direct drive Manual turntable Direct drive Brushless DC motor Aluminum diecast Diameter 33.2 cm (13-5/64") Mass 1.7 kg (3.74 lb.) 33 1/3 r/min, 45 r/rain _+8% 1.5 kg.cm (1.3 Ib.in) 0.7 s. from standstill to 33 1/3 r/rain Electronic brake 0.01% WRMS _ 0.025 % WRMS (JIS C5521) _+0.035 % peak (IEC 98A Weighted) -56 dB (IEC 98A Unweighted) -78 dB (IEC 98A Weighted) _This rating refers to turntable assembly alone, excluding effects of record, cartridge or tonearm, but including platter. Measured by obtaining signal from built-in frequency generator of motor assembly. Tonearm section Type Effective length Arm height adjustment range Overhang Effective mass Offset angle Friction Tracking error angle Universal 230 mm (9-1/16") 0-6ram 15 mm (19/32") 12 g (without cartridge) 22 ° Less than 7 mg (lateral, vertical) Within 2° 32' (at the outer groove of 30 cm (12") record) Within 0 ° 32' (at the inner groove of 30 cm (12") record) Stylus pressure adjustment range 0 - 4 g Applicable cartridge weight range 3.5 - 13 g 11 - 20.5 g (including headshell) (with auxiliary weight) 9.5 - 13 g 17 - 20.5 g (including headshell) (with shell weight) 3.5 - 6.5 g 11 - 14 g (including headshell) Headshell weight 7.5 g General Power supply Power consumption Dimensions (W×HXD) Mass AC120V, 60Hz 13.5 W 45.3 x 17.2 x 35.5 cm (17-27/32" x 6-25/32" x 13-31/32") 12 kg (26.4 Ib) Specifications are subject to change without notice. Mass and dimensions are approximate. RQT7018

Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com © 2003 Matsushita Electric Industrial Co., Ltd. Printed in Japan Panasonic Puerto Rico, Inc. Ave. 65 de Infanteria, Kin. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 www.panasonic, ca RQT7018-1Y MO203TK1124