Epson PixiePlus Projector Controller for Epson Installation Manual
Text of the manual
Projector Controller for Epson®
Installation Guide
(Decora™ wall plate not included)
ELPSP10
Patent US 7,334,067
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufactur-
er's instructions.
8) Do not install near any heat sources such as r
Preconfigured for Easy Setup
The PixiePlus (PXE-DCM+) Projector Controller for Epson® (ELPSP10) is a single-
gang AV control device configured to provide power, source selection, and volume
control of any compatible Epson projector with RS-232. Users who wish to control
an Epson projector with the Projector Controller’s preconfiguration ma
II. Installation Overview
The Projector Controller for Epson ships with:
• 1 PixiePlus Circuit Board
• 6 White Plastic Button Inserts and 7 Rubberized Button Pads
• PXE-DCM-RTC Real Time Clock Module
• PXE-DCM-CAT5-ADAPTER – PixiePlus CAT5 Output Adapter
• PXE-DCM-EMIT-CAT5-232/IR – RJ45-to-DB9/IR Adapter Ceiling Plate
• IR Emitter
• IR Emi
III. PixiePlus Installation
The Projector Controller for Epson is preconfigured to use the Discrete Power, 4-
Button Source, and Volume Control button modules. To function with the PixiePlus
preconfiguration codes, these button modules must be used.
If you wish to reconfigure the PixiePlus with alternate controls, you may replace
those button modules as need
