THOMSON ROC 36 - DESSIN Manual
Text of the manual
Indicator lamp: the red indicator lamp lights up when any key is pressed.
Product keys (TV, VCR or SAT): Used to programme and control different products (TV, satellite
receiver, video recorder, DVD player and so on).
G (REW): Goes backward or advances forward (VCRS and DVDS); press with red key for fast text
function in TV mode.
RECORD: To record, press t
3 - Programming the remote control
Method A – Fast programming with 1-digit subcode
Method B – 3-digit codes programming
Before you start programming, you must find the subcode of the product to be
controlled (Television, VCR, satellite receiver or DVD player).
Refer to the list provided with these instructions, page I of the codes.
1. Turn on the prod
Method C – Programming by means of code retrieval
Method D - Automatic code search
If none of the codes work, you may still be able to retrieve the appropriate code.
1. Turn on the product you want to control.
2. Hold down the S key (17) until the red indicator lamp (1) remains lit (the indicator
light remains on for a few seconds to give you the time to
When you have retrieved the code of your product, make note of it; after battery
replacement, you may have to programme the remote control again.
4 – How to retrieve a programmed code
5 – Check the programming
You may want to retrieve the code programmed in the remote control.
1. Hold down the S key (17) until the red indicator lamp (1) remains lit (th
7 - The NAVILIGHT system
The THOMSON NAVILIGHT system allows you easy access to the settings of your
television (TV) or video recorder (VCR).
1. Switch on the product you want to control.
2. Select the type of product concerned. In the VCR position, make sure that the AV
mode is activated for the TV set (the SCART socket must be selected).
3. Press the
