Samsung MM-29 Instruction Manual

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION Wiring the Mains Power Supply Plug IMPORTANT NOTICE The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a main socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times. IMPORTANT The wires in the main lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:– The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1

Safety Warnings ............................................................................................................................ 2 Where to Install Your Micro Compact System............................................................................... 4 Inserting Remote Control Batteries ............................................................................................... 4 Connecting the Loudspeakers....................................................................................................... 4 Connecting Your System to the Power Supply.............................................................................. 4 Connecting an AM(MW/LW) Aerial ................................................................................................ 5 Connecting an FM Aerial............................................................................................................... 5 Setting the Clock ........................................................................................................................... 6 CD PLAYER Listening to a Compact Disc.......................................................................................................... 6 Precautions When Using Compact Discs...................................................................................... 7 CD Repeat Function...................................................................................................................... 7 Programming the Order of Playback............................................................................................. 7 Checking and Changing Programmed Tracks............................................................................... 8 TUNER Searching for and Storing the Radio Stations........................................................................... 8~9 Selecting a Stored Station............................................................................................................. 9 Improving Radio Reception ........................................................................................................... 9 TAPE DECK Listening to a Cassette................................................................................................................ 10 Selecting the Cassette Playback Mode ...................................................................................... 10 Tape Counter .............................................................................................................................. 10 Maintaining the Sound Quality .................................................................................................... 10 Recording a Radio Programme ................................................................................................... 11 Recording a CD with the CD Synchro Feature............................................................................ 11 Repeat A B Function............................................................................................................... 11 Recommendations for Recording ................................................................................................ 11 OTHER FEATURES Timer Function............................................................................................................................. 12 Cancelling the Timer.................................................................................................................... 12 Sleep Timer ................................................................................................................................. 13 Super Bass Sound....................................................................................................................... 13 Equalizer...................................................................................................................................... 13 About RDS broadcasting ............................................................................................................ 14 PTY(Program Type) indication and PTY-SEARCH function ....................................................... 15 CD Digital Out Jack .................................................................................................................... 15 Power sound function.................................................................................................................. 16 Connecting Headphones............................................................................................................. 16 Connecting to an External Source............................................................................................... 16 Safety Precautions ...................................................................................................................... 17 Before Contacting the After-Sales Service.................................................................................. 17 Front Panel View ......................................................................................................................... 18 Remote Control ........................................................................................................................... 19 Rear Panel View.......................................................................................................................... 20 Technical Specifications............................................................................................................... 20 You have just purchased a SAMSUNG micro compact system. Please take the time to read these instructions, as they will enable you to set up your player easily and take full advantage of its features.

these installation instructions before connecting the unit. Install the system on a flat, stable surface. Never place this unit on carpeting. Never locate this unit in an outdoor area. Maintain an open space of approximately 4 inches (10 cm) on the sides and rear of the system, for ventilation purposes. Make sure that you have enough room to open the compact disc compartment easily. Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound. Direct the loudspeakers towards the listening area. For optimum performance, make sure that both speakers are placed at an equal distance above the floor. Insert or replace remote control batteries when you: Purchase the Micro compact system Find that the remote control is no longer operating correctly When replacing the batteries, use a new set of batteries and never mix alkaline and manganese batteries. 1 Place your thumb on the position marked on the battery compartment cover (rear of the remote control) and push the cover in the direction of the arrow. 2 Insert two AAA, LR03 or equivalent batteries, taking care to respect the polarities: + on the battery against + on the remote control – on the battery against – on the remote control 3 Replace the cover by sliding it back until it clicks into position. The loudspeaker connector terminals are located on the rear of the system (red and black tabs). There are four terminals on the system: Two for the left speaker (marked L) Two for the right speaker (marked R) To achieve the correct sound quality, connect the: Red wire to the + terminals Black wire to the - terminals 1 To connect a wire to a terminal, push the tab as far as it will go: To the right on the system and hold it in position 2 Insert the wire, up to the plastic sheathing, in the hole. 3 Push the tab back: To the left on the system, release the tab. Result: The wire is pinched and held firmly in place. 4 Repeat the operation for each wire. The power cord lead must be plugged into an appropriate socket. Before plugging your system into an outlet, you must check the voltage. 1 Plug the power cord (marked AC CORD on the rear of the system) into an appropriate socket. 2 Press the POWER button to switch your Micro compact system on. Where to Install Your Micro-Compact System Inserting Remote Control Batteries Connecting the Loudspeakers Connecting Your System to the Power Supply (MM-29 only) (MM-39 only)

Placed on a stable surface Fixed to the wall (you must first remove the base) The AM(MW) aerial connector terminals are located on the rear of the system and are marked AM. To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires. Always keep them at least 2 inches (5 cm) away. How to connect a COAXIAL TYPE aerial. Connect a 75Ωantenna to the FM aerial terminal. Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system. Follow the instructions given on Page 8 to tune into a radio station, and determine the best position for the aerial. If reception is poor, you may need to install an outdoor aerial. To do so, connect an outdoor FM aerial to the FM socket on the rear of the system, using a 75Ωcoaxial cable (not supplied). Connecting the AM(MW/LW) Aerial Connecting the FM Aerial FM FM FM AERIAL (supplied) 75ΩCOAXIAL CABLE (not supplied) DC JACK DC IN 12V AM FM (75Ω) ANTENNA