Samsung MM-ZJ9 Instruction Manual

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED, AVOID EXPOSURE TO BEAM. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR C ...

About RDS DISPLAY function This unit has the RDS (Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc.) to be received from the FM RDS station together with normal radio signal. Press the ( ) button. Receive the FM radio. See the radio receiving method on the page 15. FM and frequency are shown on the display If the received station transfers the RDS information, 'RDS' appears automatically on the display. Press the RDS DISPLAY button to sele ...

sound quality of your micro component system when listening to other sources. Examples: A television A video disc player A Hi-Fi stereo video cassette recorder To connect to the external source, the source must have an audio output. In addition, you need an RCA connection cable. Set the system to standby mode and disconnect it and the external source from the main socket. Connect the audio cable to the rear of the micro component system. Connect the... To the connector marked... Red jack R (right) White jack L (left) For optimum sound q ...

Press this button once if you have started listening to the selection. Press PROGRAM/SET button twice. Result: The following indications are displayed: (01 = Program no., – – = Track no. on the disc) If you have already programmed 24 tracks, CH is displayed when you press the PROGRAM/SET button. Press this PROGRAM/SET button one or more times until the track to be changed is displayed. Press the or button to select a different track. Press this PROGRAM/SET button to confirm your change. Press this MP3-CD/CD (√/») button to st ...

Passage on a CD When listening to a compact disc, you can quickly search for a specific music passage on a track. To search through the tracks... Press and hold down... Forwards for at least one second Backwards for at least one second It is recommended that you turn the volume down before using this function. What is MP3? Playback sequence of albums and tracks In case of Window Explorer display. The arrows indicates playback sequence of albums and tracks. Tracks with jpg, wav or doc only are not audio files and therefore will be skipped. MP3 means MPEG1 La ...

You do not need to adjust the volume, as it has no effect on the recording. Switch the system on by pressing the ( ) button. Insert a blank cassette in Deck. Select the TUNER function by pressing the TUNER/BAND button. Select the radio station that you wish to record by pressing the or button . Press the REC/PAUSE button. Result: REC is displayed in red and recording starts. To stop recording, press the button. 1 2 3 4 5 6 The direct recording mode enables you to start recording with any track on the compact disc. You do not need to adjust ...

instructions are thus subject to change without notice. RADIO AM (MW) Signal/noise ratio 40 dB Usable sensitivity 56 dB Total harmonic distortion 2 % FM Signal/noise ratio 60 dB Usable sensitivity 3 dB Total harmonic distortion 1.0 % COMPACT DISC PLAYER Frequency range 20 Hz - 20 KHz (± 1 dB) Signal/noise ratio 90 dB (at 1 KHz) with filter Distortion 0.05 % (at 1 KHz) Channel separation 80 dB Disc sizes Diameter: 120 or 80 mm. Thickness: 1.2 mm TAPE DECK Frequency range 125 Hz ~ 10 KHz Signal/n ...

Before plugging your system into a main socket, you must check the voltage. Plug the main lead into an appropriate socket. Press the ( ) button to switch your micro component system on. To take full advantage of your new micro component system, follow these installation instructions before connecting the unit. Install the system on a flat, stable surface. Never place this unit on carpeting. Never place this unit in an outdoor area. Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ...