Samsung LNT466F Owner's Instructions Manual

Record your Model and Serial number here for future reference. · Model __________ · Serial No. ____________ LN-T466F TFT-LCD TELEVISION Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente. Country Customer Care Center Web Site Address CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada U.S.A 1-800-SAMSUNG (7267864) www.samsung.com Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 BN68-01273A-00 BN68-01273A-Cover.indd 1 2007-06-29

A still image may cause permanent damage to the TV screen • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. • Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. • Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images. © 2007 Samsung Electronics Co., Ltd. All rights reserved. Precauciones al mostrar en la pantalla una imagen fija La imagen fija puede causar daños permanentes en la pantalla del televisor. • No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”. Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de luminosidad y de contraste de la pantalla cuando muestre imágenes fijas. • El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las partes izquierda, derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla. La reproducción de un DVD o el uso de una consola de videojuegos pueden provocar un efecto similar en la pantalla. Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla. La garantía no cubre estos daños. • Ver imágenes fijas de videojuegos y PC durante más tiempo del indicado puede producir restos de imágenes parciales. Para evitar este efecto, reduzca el ‘brillo’ y el ‘contraste’ cuando vea imágenes fijas. Important Warranty Information Regarding Television Format Viewing Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty. U.S.A Only The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3. Other countries The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Contents English General Information List of Features.....................................................................2 Accessories..........................................................................2 Viewing the Control Panel ................................................... 3 Viewing the Connection Panel ............................................ 4 Remote Control....................................................................5 Installing Batteries in the Remote Control............................ 6 Connections Connecting VHF and UHF Antennas.................................... 6 Connecting Cable TV........................................................... 7 Connecting a VCR................................................................ 8 Connecting a Camcorder .................................................... 9 Connecting a DVD Player/Set-Top Box................................ 9 Connecting a DVD Player/Set-Top Box via HDMI.............. 10 Connecting a DVD Player/Set-Top Box via DVI................. 10 Connecting a Digital Audio System.................................... 11 Connecting an Amplifier/DVD Home Theater..................... 11 Connecting a PC................................................................ 11 Operation Turning the TV On and Off................................................. 12 Plug & Play Feature...........................................................12 Changing Channels............................................................ 13 Adjusting the Volume.......................................................... 14 Viewing the Display............................................................ 14 Viewing the Menus............................................................. 15 Memorizing the Channels................................................... 15 Setting Up Your Remote Control .......................................17 Remote Control Codes....................................................... 19 To Select the Source..........................................................22 To Edit the Input Source Name .........................................22 Picture Control Using Automatic Picture Settings....................................... 23 Adjusting the Color Tone.................................................... 24 Adjusting the Detailed Settings.......................................... 25 Changing the Screen Size.................................................. 28 Setting the Active Color...................................................... 29 DNIe (Digital Natural Image engine).................................. 29 Freezing the Picture ..........................................................30 Setting the Film Mode....................................................... .30 HDMI Black Level...............................................................30 Viewing Picture-in-Picture.................................................. 31 Sound Control Customizing the Sound...................................................... 33 Using Automatic Sound Settings........................................ 33 Setting the TruSurround XT................................................ 34 Choosing a Multi-Channel Sound (MTS) track - Digital ..... 34 Choosing a Multi-Channel Sound (MTS) track - Analog .... 35 Automatic Volume Control.................................................. 35 Selecting the Internal Mute................................................. 36 Setting the On/Off Melody.................................................. 36 Listening to the Sound of the Sub (PIP) Picture................. 37 Resetting the Sound Settings to the Factory Defaults....... 37 Connecting Headphones.................................................... 37 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Channel Control Selecting the Antenna........................................................ 38 Clearing Scrambled Channels - Digital.............................. 38 Adding and Erasing Channels.......................................... 39 To set-up Your Favorite Channels...................................... 40 Using the Channel Lists..................................................... 41 Viewing the Channel Lists.................................................. 41 Labeling Channels..............................................................42 LNA (Low Noise Amplifier).................................................. 42 Fine Tuning Analog Channels............................................ 43 Checking the Digital-Signal Strength.................................. 43 PC Display Using Your TV as a Computer (PC) Display....................... 44 Display Modes....................................................................44 Setting up the TV with your PC.......................................... 45 Setting the Home Theater PC............................................ 46 Time Setting Setting the Clock................................................................ 47 Function Description Selecting a Menu Language.............................................. 50 Setting the Blue Screen Mode............................................ 51 Using the Game Mode....................................................... 51 Viewing Closed Captions (On-Screen Text Messages) - Analog................................ 52 Viewing Closed Captions (On-Screen Text Messages) - Digital................................. 53 Menu Transparency Level.................................................. 54 Using the Energy Saving Feature...................................... 54 Setting the Function Help................................................... 55 Digital Noise Reduction...................................................... 55 Using the V-Chip................................................................56 Upgrading the Software ....................................................63 WISELINK Using the WISELINK Function........................................... 64 Using the WISELINK Menu................................................ 65 Using the PHOTO (JPEG) List........................................... 66 Using the MP3 List.............................................................73 Using the Setup Menu........................................................ 75 About Anynet+ What is Anynet+? ....................................................................77 Connecting Anynet+ Devices...................................................77 Setting Up Anynet+..................................................................78 Scanning and Switching between Anynet+ Devices................78 Recording................................................................................79 Listening through a Receiver (Home theater)..........................80 Check Points before Requesting Service................................80 Appendix Troubleshooting..................................................................81 Installing the Stand.............................................................83 Disconnecting the Stand.................................................... 83 Auto Wall-Mount Adjustment (Sold separately)................ 84 Wall Mount Kit Specifications (VESA)................................ 85 Using the Anti-Theft Kensington Lock................................ 86 Specifications.....................................................................87 Dimensions.......................................................................88 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ English - 1 Symbol Press Important Note One-Touch Button

Accessories Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Remote Control & Batteries (AAA x 2) (BN59-00599A) Power Cord (3903-000144) Cleaning Cloth (BN63-01798A) Cover-Bottom (BN63-02624A) Owner’s Instructions Warranty Card / Registration Card / Safety Guide Manual (Not available in all locations) The items color and shape may vary depending on the model. General Information List of Features  Adjustable picture settings that can be stored in the TV’s memory.  Automatic timer to turn the TV on and off.  A special sleep timer.  Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed.  HDMI/DVI connection of your PC to this TV.  Remote Control The supplied remote can be used to operate the TV as well as most DVD players, Cable Box/Satellite receiver (Set-Top Box) and VCRs.  Excellent Picture Quality - DNIe technology provides life-like clear images.  SRS TruSurround XT - SRS TruSurround XT provides a virtual Dolby surround system.

Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. The product color and shape may vary depending on the model. 1 SOURCE Toggles between all the available input sources (TV, AV1, AV2, S-Video1, S-Video2, Component1, Component2, PC, HDMI1, HDMI2, HDMI3). In the on-screen menu, use this button as you would use the ENTER button on the remote control. 2 MENU Press to see an on-screen menu of your TV’s features. 3 + VOL - Press to increase or decrease the volume. In the on-screen menu, use the + VOL - buttons as you would use the ◄ and ► buttons on the remote control. 4 < CH > Press to change channels. In the on-screen menu, use the < CH > buttons as you would use the ▲ and ▼ buttons on the remote control. 5 SPEAKERS 6 (Power) Press to turn the TV on and off. POWER INDICATOR Blinks and turns off when the power is on and lights up in stand-by mode. 7 REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV.

Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 6-11. 1 AUDIO OUT Connects to the audio input jacks on your Amplifier/ Home theater. 2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 3 PC IN Connects to the video and audio output jacks on your PC. 4 HDMI IN 1,2,3 / DVI IN(HDMI1) (AUDIO R/L) Connects to the HDMI jack of a device with an HDMI output. Use the HDMI IN 1 jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for video connection and the DVI IN (HDMI1) ‘R-AUDIO-L’ jacks for audio. - No sound connection is needed for an HDMI to HDMI connection - When using an HDMI/DVI cable connection, you must use the HDMI IN 1 jack. 5 ANT 1 IN / ANT 2 IN Connects to an antenna or cable TV system. 6 EX-LINK Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control. 7 COMPONENT IN 1,2 Connects Component video/audio. 8 AV IN 1 / AV IN 2 Video and audio inputs for external devices, such as a camcorder or VCR. S-VIDEO Connects an S-Video signal from a camcorder or VCR. 9 POWER INPUT Connects the supplied power cord 0 KENSINGTON LOCK The Kensington lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV. The location of the Kensington Lock may be different depending on its model. ! HEADPHONE Connects a set of external headphones for private listening. @ WISELINK Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3). [Side Panel Jacks]

Remote Control You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player or Cable Box/Satellite receiver (Set-Top Box) This is a special remote control for the visually impaired and has Braille points on the POWER, CH, VOL, STOP and PLAY/PAUSE buttons. The performance of the remote control may be affected by bright light. 1 POWER Turns the TV on and off. 2 NUMERIC BUTTONS Press to change the channel. 3 – Press to select additional channels(digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”. 4 CH LIST Used to display Channel Lists on the screen. 5 ANTENNA Press to select “AIR” or “CABLE”. 6 VCR/DVD Functions - Rewind - Stop - Play/Pause - Fast/Forward 7 VOL / VOL Press to increase or decrease the volume. 8 (MUTE) Press to temporarily cut off the sound. 9 MENU Displays the main on-screen menu. 0 S.MODE Press to select the sound mode. ! RETURN Returns to the previous menu. @ P.MODE Press to select the picture mode. # CAPTION Controls the caption decoder. $ FAV.CH Press to switch to your favorite channels. % SLEEP Press to select a preset time interval for automatic Shut off. ^ SRS Selects SRS TruSurround XT mode. & SET Sets the remote to control your TV, VCR, Cable, DVD, or Set-Top Box * TV, DVD, STB, CABLE, VCR Press to operate your TV,DVD, STB, CABLE (box), or VCR (See pages 17-21) ( When pressing this button, a number of buttons on the remote control (e.g. TV, DVD, STB, CABLE, VCR, VOL and CH buttons) light up for a few seconds and then turn off to save power. This function is convenient for using the remote at night or when dark. ) SOURCE Press to display all of the available video sources. a PRE-CH Tunes to the previous channel. b WISELINK This function enables you to view and play photo (JPEG) and audio files (MP3) from an external device. (Refer to pages 64 (JPEG) and 74 (MP3)) c REC This remote can be used to control recording on Samsung recorders. (Refer to page 79) d CH / CH Press to change channels. e EXIT Press to exit the menu. f UP▲ / DOWN▼ / LEFT◄ / RIGHT► / ENTER Use to select on-screen menu items and change menu values. g INFO Press to display information on the TV screen. h Anynet+ Runs the Anynet+ functions and sets up Anynet devices. i STILL Press to stop the action during a particular scene. Press again to resume normal video. j P.SIZE Picture size selection. k PIP Picture-in Picture ON/OFF. l CH / Displays the available channels in sequence. (These buttons change channels in the PIP window only.) m MTS Press to choose stereo, mono or Separate Audio Program (SAP broadcast). n RESET When your remote does not work, change the batteries and press the RESET button for 2-3 seconds before use.

1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries should last for about one year.) If the remote control doesn’t work, check the following: 1. Is the TV power on? 2. Are the plus and minus ends of the batteries reversed? 3. Are the batteries drained? 4. Is there a power outage, or is the power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby? Installing Batteries in the Remote Control Connecting VHF and UHF Antennas If your antenna has a set of leads that look like the diagram to the right, see "Antennas with 300 Ω Flat Twin Leads" below. If your antenna has one lead that looks like the diagram to the right, see "Antennas with 75 Ω Round Leads". If you have two antennas, see "Separate VHF and UHF Antennas". 1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied). Use a screwdriver to tighten the screws. 2. Plug the adaptor into the ANT 1 IN (AIR) terminal on the back of the TV. ANT 1 IN (AIR) Antennas with 300 Ω Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300 Ω twin flat leads, follow the directions below. 1. Plug the antenna lead into the ANT 1 IN (AIR) terminal on the back of the TV. Antennas with 75 Ω Round Leads ANT 1 IN (AIR) Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before con- necting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1. Connect both antenna leads to the combiner. 2. Plug the combiner into the ANT 1 IN (AIR) terminal on the bottom of the rear panel. UHF VHF ANT 1 IN (AIR) UHF VHF Connections

After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.) Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.) 2. Connect this cable to a two-way splitter. 3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box. 4. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch. 1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box. This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN". 5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch. 6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT 2 IN (CABLE) terminal on the rear of the TV. Splitter Incoming cable Splitter Cable Box Incoming cable Splitter Cable Box RF (A/B) Switch Incoming cable ANT IN Splitter Cable Box Incoming cable RF (A/B) Switch Splitter Cable Box Incoming cable TV Rear RF (A/B) Switch ANT 2 IN (CABLE) Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV. Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1. Find the cable that is connected to the ANT OUT terminal on your cable box. This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT". 2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV. ANT OUT ANT IN ANT 2 IN (CABLE) ANT 2 IN (CABLE)

Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6-7). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or antenna from the back of the TV. 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT 1 IN (AIR) or ANT 2 IN (CABLE) terminal on the TV. 4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 (or AV IN 2) [VIDEO] jack on the TV. 5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV. If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables. Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. TV Rear Panel RF Cable (Not supplied) 3 VCR Rear Panel 2 Video Cable (Not supplied) 4 Audio Cable (Not supplied) 5 Your Samsung TV can be connected to an S-Video signal from an VCR. (This connection delivers a better picture as compared to a standard VCR.) 1. To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV. 2. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN1 [S-VIDEO] jack on the TV. 3. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN1 [R-AUDIO-L] jacks on the TV. An S-Video cable may be included with a VCR. (If not, check your local electronics store.) Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. VCR Rear Panel RF Cable (Not supplied) 1 Audio Cable (Not supplied) 3 TV Rear Panel S-Video Cable (Not supplied) 2 Video Connection S-Video Connection ANT 1 IN (AIR) ANT 2 IN (CABLE)

Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. 1. Connect a Component Cable between the COMPONENT IN(1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box/ Satellite receiver (Set-Top Box). 2. Connect Audio Cables between the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD Player or Cable Box/ Satellite receiver (Set-Top Box). Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also. Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable. DVD Player or Cable Box / Satellite receiver (Set-Top Box) TV Rear Panel Component Cable (Not supplied) 1 Audio Cable (Not supplied) 2 Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR 1. Connect a Video Cable (or S-Video Cable) between the AV IN2 [VIDEO] (or S-Video) jack on the TV and the VIDEO OUT jack on the camcorder. 2. Connect Audio Cables between the AV IN2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder. Camcorder TV Side Panel S-Video Cable (Not supplied) 1 Audio Cable (Not supplied) 2 Each Camcorder has a different back panel configuration. When connecting a Camcorder, match the color of the connection terminal to the cable. Video Cable (Not supplied) 1 or

Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. DVD Player or Cable Box/Satellite receiver (Set-Top Box) TV Rear Panel HDMI Cable (Not supplied) Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI This connection can only be made if there is a DVI Output connector on the external device. Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection,you must use the HDMI IN1 jack. TV Rear Panel DVD Player or Cable Box/ Satellite receiver (Set-Top Box) Audio Cable (Not supplied) 2 DVI to HDMI Cable (Not supplied) 1 1. Connect an HDMI Cable between the HDMI IN (1,2 or 3) jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box) 1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI IN 1 jack on the TV and the DVI jack on th DVD Player or Cable Box/Satellite receiver (Set-Top Box) 2. Connect Audio Cables between the DVI IN (HDMI 1) [R-AUDIO-L] jack on the TV and the DVD Player or Cable Box/Satellite receiver (Set-Top Box) Side Panel Jacks or What is HDMI? • HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals using a single cable. • The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. When connecting via HDMI, you do not need to connect Audio Cables. You only need to connect Audio cables when connecting via HDMI/DVI. The TV may not output sound and pictures may be displayed with abnormal color when DVD players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 1 jack and the audio cables to the DVI IN (HDMI1) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI version, then request an upgrade. HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

Connecting an Amplifier/DVD Home Theater 1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [R-AUDIO-L] jacks on the Amplifier/DVD Home Theater. When an audio amplifier is connected to the "AUDIO OUT [R-AUDIO-L]" jack: Decrease the volume of the TV and adjust the volume level with the Amplifier’s volume control. Amplifier/DVD Home Theater TV Rear Panel Audio Cable (Not supplied) Each Amplifier/DVD Home Theater has a different back panel configuration. When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable. English - 11 Connecting a Digital Audio System 1. Connect an Optical Cable between the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” jack: Decrease the volume of the TV and adjust the volume level with the system’s volume control. Digital Audio System TV Rear Panel Optical Cable (Not supplied) 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH. Each Digital Audio System has a different back panel configuration. If you have an external device (DVD, Cable/Set top box) connected via HDMI to the TV, audio is not output from the Optical jack. When the COMPONENT IN or HDMI IN jacks are connected, the Optical jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV. The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. Connecting a PC PC TV Rear Panel D-Sub Cable (Not supplied) 1 PC Audio Cable (Not supplied) 2 1. Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. 2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. Each PC has a different back panel configuration. When connecting a PC, match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN1 terminal. 3.5 mm Stereo mini-plug/2RCA Cable (Not supplied) 2 HDMI/DVI Cable (Not supplied) 1 Using the D-Sub Cable Using the HDMI/DVI Cable TV Rear Panel Using the D-Sub Cable 1. Connect a HDMI/DVI cable between the HDMI IN 1 jack on the TV and the PC output jack on your computer. 2. Connect a 3.5 mm Stereo mini-plug/2RCA Cable between the DVI IN(HDMI1) [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer. Using the HDMI/DVI Cable PC

Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: 1. Press the POWER button on the remote control. The message “Menu language, Shop Mode, Channels and Time will be set.” is displayed. Press the ENTER button, then “Select the language of the OSD” menu is automatically displayed. 2. Press the ▲ or ▼ button to select language, then press the ENTER button. The message “Select Home Mode when installing this TV at home.” is displayed. 3. Press the ◄ or ► button to select “Shop” or “Home”, then press the ENTER button. The message “Select the antennas to memorize.” is displayed. We recommend setting the TV to Home mode for the best picture in your home environment. Shop mode is only intended for use in retail environments. If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press any Volume button and then hold down the MENU button for five seconds on the side panel of the TV. 4. Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER button to select “Start”. If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to ANT 2 (CABLE), select “Cable”. If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”. In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲ or ▼ button, then press the ENTER button. Contact your local cable company to identify the type of cable system that exists in your particular area. 5. The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the ENTER button when channel memorization is complete. The message “Select the clock mode.” is displayed. To stop the search before it has finished, press the ENTER button with stop selected. 6. Press the ENTER button. Press the ▲ or ▼ button to select “Auto”, then Press the ENTER button. The message “Set to daylight savings time.” is displayed. If you select "Manual", "Set current date and time." is displayed. (See page 47) Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Operation Select Home Mode when installing this TV at home. Plug & Play Plug & Play Clock Set Menu Language : Plug & Play English Español Français Move Enter Skip Shop Menu language, Shop Mode, Channels and Time will be set. Start Select the language of the OSD. Home Move Enter Skip Select the antennas to memorize. Start Air Plug & Play Cable Air+Cable Start Start Move Enter Skip Clock Mode : Move Enter Skip Select the clock mode. Plug & Play Manual Auto 35% Stop Enter Skip Auto Program in progress. Air Channel 50 Plug & Play Plug & Play Auto Program is complete. 16 Channels were memorized. Air : 16, Cable : 0. Enter Skip OK Plug & Play

7. Press the ▲ or ▼ button to select “Off” or “On”, then the ENTER button. The message “Select the time zone in which you live.” is displayed. 8. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER button. If you have received a digital signal, the time will be set automatically. If not, see page 48 to set the clock. 9. The message “Enjoy your watching.” is displayed. When you have finished, press the ENTER button. If you want to reset this feature... 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ENTER button again, to select "Plug & Play". 3. The message “Menu language, Shop Mode, Channels and Time will be set.” is displayed. Daylight Savings Time : Set the daylight savings time. Plug & Play On Off Select the time zone in which you live. Plug & Play Newfoundland Atlantic Eastern Central Mountain Pacific Alaska Hawaii Enjoy your watching. OK Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return Menu language, Shop Mode, Channels and Time will be set. Start Move Enter Skip Move Enter Skip Changing Channels 1. Press the CH or CH button to change channels. When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 16 to memorize channels. Using the Channel Buttons 1. Press the number buttons to go directly to a channel. For example, to select channel 27, press 2, then 7. The TV will change channels when you press the second number. Using the Number Buttons The “-” button is used to select stations that broadcast a digital signal. 1. For example, for Channel 7-1, press 7, then -, then 1. HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal. For quick channel change, press the number buttons, then press the ENTER button. Using the “-” Button

Adjusting the Volume 1. Press the VOL or VOL buttons to decrease or increase the volume. Using the MUTE button At any time, you can cut off the sound using the MUTE button. 1. Press MUTE button and the sound cuts off. The word " " will appear in the lower-left corner of the screen. 2. To turn mute off, press the MUTE button again, or simply press the VOL or VOL buttons. Viewing the Display 1. Press the INFO button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings. Press the INFO button once more or wait approximately 10 seconds and the display disappears automatically. The display identifies the current channel and the status of certain audio-video settings. Air 7 Mono Picture Mode : Dynamic Sound Mode : Custom MTS : Stereo 05 : 54 pm 1. Press the PRE-CH button. The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them. Using the PRE-CH Button to select the Previous Channel

Viewing the Menus 1. With the power on, press the MENU button. The main menu appears on the screen. The menu’ s left side has five icons: Picture, Sound, Channel, Setup, Input. 2. Use the ▲ or ▼ button to select one of the five icons. Then press the ENTER button to access the icon’s sub-menu. 3. Press the EXIT button to exit. The on-screen menus disappear from the screen after about one minutes. Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available channels are memorized, use the CH or CH buttons to scan through the channels. This eliminates the need to change channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Lists ). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ENTER button select “Antenna”. Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER button. Press the EXIT button to exit. Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Channel Move Enter Return TV Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Air Cable Move Enter Exit Mode : Dynamic ► Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Balck light 10 ▼More Picture TV

Storing Channels in Memory (Automatic Method) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select "Auto Program", then press the ENTER button. 3. Press the ▲ or ▼ button to select the antenna connection, then press the ENTER button. Air: “Air” antenna signal. Cable: “Cable” antenna signal. Air+Cable: “Air” and “Cable” antenna signals. 4. When selecting the Cable TV system : Press the ENTER button to start the auto program. By default, the cable TV system is set to “STD”. If you want to select another type of cable system, press the ▲ or ▼ button to select “STD”, “HRC” or “IRC”. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Press the ENTER button to start the auto program. To stop the search before it has finished, press the ENTER button with stop selected. 5. After all the available channels are stored, the “Auto Program” menu reappears. Press the EXIT button to exit. Move Enter Return Select the antennas to memorize. Channel Move Enter Return TV Start Air Cable Air+Cable Start Start Move Enter Return Select the cable system. Auto Program Move Enter Return TV Analog Start STD HRC IRC Digital STD HRC IRC Auto Program Cable Channel 50 50% Stop Enter Return Auto Program in Progress. Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Auto Program Enter Return Auto Program is complete. 16 Channels were memorized. Air : 16, Cable : 0. OK

After the television has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up the Remote to Operate Your VCR 1. Turn off your VCR.  2. Press the VCR button on your TV’s remote control. 3. Press the SET button on your TV’s remote control. 4. Using the number buttons on your remote control, enter three digits of the VCR code listed on page 19 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.) 5. Press the POWER button on the remote control. Your VCR should turn on if your remote is set up correctly. If your VCR does not turn on after set up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of VCR. If no other codes are listed, try each VCR code, 000 through 080. Note on Using Remote Control Modes: VCR When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume. Setting Up the Remote to Operate Your Cable Box 1. Turn off your cable box. 2. Press the CABLE button on your TV’s remote control. 3. Press the SET button on your TV’s remote control. 4. Using the number buttons on your remote control, enter three digits of the cable box code listed on page 20 of this manual for your brand of cable box. Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.) 5. Press the POWER button on the remote control. Your cable box should turn on if your remote is set up correctly. If your cable box does not turn on after set up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of cable box. If no other codes are listed, try each code, 000 through 046. Note on Using Remote Control Modes: Cable Box When your remote control is in “CABLE” mode, the volume buttons still control your TV’s volume. Setting up your Remote Control

Setting Up the Remote to Operate Your DVD 1. Turn off your DVD. 2. Press the DVD button on your TV’s remote control. 3. Press the SET button on your TV’s remote control. 4. Using the number buttons on your remote control, enter three digits of the DVD code listed on page 20~21 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.) 5. Press the POWER button on the remote control. Your DVD should turn on if your remote is set up correctly. If your DVD does not turn on after set up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of DVD. If no other codes are listed, try each code, 000 through 141. Note on Using Remote Control Modes: DVD When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume. Setting Up the Remote to Operate Your STB 1. Turn off your STB. 2. Press the STB button on your TV’s remote control. 3. Press the SET button on your TV’s remote control. 4. Using the number buttons on your remote control, enter three digits of the STB code listed on page 21 of this manual for your brand of STB. Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.) 5. Press the POWER button on the remote control. Your STB should turn on if your remote is set up correctly. If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of STB. (If no other codes are listed, try each code, 000 through 074.) Note on Using Remote Control Modes: STB When your remote control is in “STB” mode, the volume buttons still control your TV’s volume.

VCR Brand Code SAMSUNG 000 001 002 003 004 005 077 078 079 ADMIRAL 020 AIWA 025 AKAI 004 027 032 AUDIO DYNAMICS 007 026 BELL&HOWELL 018 BROKSONIC 022 CANDLE 002 003 006 008 015 055 CANON 021 056 CITIZEN 002 003 006 008 015 055 COLORTYME 007 CRAIG 002 024 CURTIS MATHES 002 007 008 017 021 025 056 064 066 DAEWOO 003 010 011 012 013 014 015 016 DB 007 026 DIMENSIA 017 DYNATECH 025 ELECTROHOME 034 EMERSON 001 003 006 021 022 025 030 032 034 040 047 050 052 060 063 065 066 067 069 073 FISHER 018 024 028 029 048 051 061 FUNAI 025 GENERAL ELECTRIC 002 005 017 021 056 GO VIDEO 002 HARMAN KARDON 007 HITACHI 019 025 041 042 074 INSTANT REPLAY 021 JC PENNEY 002 007 018 019 021 026 037 041 054 056 JCL 007 008 018 021 026 037 JVC 081 082 083 KENWOOD 007 008 018 021 026 037 KLH 070 KONIA 036 LG(Goldstar) 006 007 008 009 010 LIOYD 025 LOGIK 038 LXI 025 MAGNAVOX 021 056 059 MARANTZ 007 008 018 021 026 037 062 MARTA 006 MEI 021 MEMOREX 006 021 024 025 MGA 034 MIDLAND 005 MINOLTA 019 041 075 MITSUBISHI 019 034 041 046 Brand Code MONTGOMERY WARD 020 MTC 002 025 MULTITECH 002 005 025 038 NEC 007 008 018 026 037 062 064 OPTIMUS 020 ORION 073 074 075 076 PANASONIC 021 056 071 072 PENTAX 019 041 075 PENTEX RESEARCH+ 008 PHILCO 021 056 059 PHILIPS 021 080 PIONEER 019 026 039 053 PORTLAND 015 049 055 PROSCAN 017 QUARTZ 018 QUASAR 021 056 RADIO SHACK/ REALISTIC 006 018 020 021 024 025 029 034 048 056 RCA 002 017 019 021 035 041 043 057 068 076 SANSUI 026 SANYO 018 024 SCOTT 003 047 052 067 SEARS 006 018 019 024 028 029 041 048 051 SHARP 020 034 045 015 SHIMTOM 027 033 038 058 SIGNATURE 025 SONY 027 033 044 SYLVANIA 021 025 056 059 SYMPHONIC 025 TANDY 018 025 TASHIKA 006 TATUNG 037 TEAC 025 037 068 TECHNICS 021 TEKNIKA 006 021 025 031 TMK 066 TOSHIBA 003 019 029 051 052 TOTEVISION 002 006 UNITECH 002 VECTOR RESEARCH 007 026 VICTOR 026 VIDEO CONCEPTS 007 026 VIDEOSONIC 002 WARDS 002 003 006 019 020 021 024 025 034 038 041 YAMAHA 007 008 018 026 037 ZENITH 023 027 033 Remote Control Codes

CABLE BOX Brand Code SAMSUNG 000 001 002 003 004 005 006 007 GI 041 HAMLIN 003 024 031 HITACHI 025 030 JERROLD 038 039 MACOM 025 030 MAGNAVOX 019 023 028 OAK 026 PANASONIC 003 022 027 037 044 PHILIPS 019 021 023 028 PIONEER 004 018 020 044 RCA 014 022 040 REGAL 003 Brand Code REGENCY 015 023 SA 042 043 SCIENTIFIC ATLAN 042 043 SPRUCER 022 STARGATE 2000 036 SYLVANIA 016 TEXSCAN 016 TOCOM 032 UNIVERSAL 033 034 VIEWSTAR 019 021 023 028 WARNER AMEX 046 ZENITH 017 029 035 037 045 SAMSUNG DVD Product Code DVD 000 001 002 DVDR 003 004 BD Record 005 006 VCR COMBO 007 008 009 010 011 VCR Record 012 DHR COMBO 013 Product Code Home Theater VCR COMBO 014 015 016 HDD Recorder COMBO 017 TWIN TRAY COMBO 018 STB DVD COMBO 019 DVD Receiver 020 AV Receiver 021 DVD Brand Code ANAM 030 AUDIOVOX 075 AUDIOLOGIC 085 ANABA 072 APEX DIGITAL 070 071 074 086 083 084 088 111 112 AIWA 114 BROKSONIC 062 BLAUPUNKT 074 B&K 122 123 CURTIS MATHES 027 CYBER HOME 077 078 079 082 CLARION 080 125 CIRRUS 081 CYBER HOME 065 CINEVISION 095 DAEWOO 066 DENON 146 FARENHEIT 067 068 FISHER 090 GPX 060 GO VIDEO 061 089 133 135 GE 069 074 GREENHILL 074 HITACHI 064 113 HITEKER 071 HOYO 073 HARMAN / KARDON 091 110 IRT 089 Brand Code INTEGRA 092 JBL 091 JVC 022 033 115 116 JATON 073 KENWOOD 051 108 109 KISS 073 KONKA 059 100 106 107 KLH 074 075 LG(Goldstar) 025 031 LOEWE 057 LASONIC 058 MOBILE AUTHORITY 054 MEMOREX 055 MALATA 056 MAGNAVOX 076 093 MINTEK 074 094 MONYKA 073 NORCENT 048 049 050 NEXT BASE 052 NEC 053 NANTAUS 144 NESA 074 OPTOMEDIA ELECTRONICS 105 OPTIVIEW 072 ONKYO 076 092 119 PHILCO 044 045 PRINCETON 046 047 PROSCAN 023

DVD Brand Code PANASONIC 024 034 124 134 136 137 138 PHILIPS 036 076 ROTEL 117 118 RIO 120 RCA 023 035 074 075 131 132 RAITE 073 ROWA 038 SAMPO 104 SONY 026 029 126 127 128 129 130 141 SHERWOOD 039 041 SVA 042 SYLVANIA 043 093 SHARP 140 SANSUI 062 SANYO 062 090 SHINSONIC 094 Brand Code THOMSON 145 TOSHIBA 028 062 076 TECHNICS 139 TVIEW 072 TOKAI 073 TEAC 096 TECHWOOD 097 TREDEX 098 099 101 URBAN CONCEPTS 076 VENTURER 075 VOCOPRO 102 YAMAHA 032 063 YAMAKAWA 040 073 XWAVE 103 ZENITH 076 121 SAMSUNG SET-TOP BOX Product Code Ground wave STB 000 001 002 008 013 CABLE STB 000 004 008 013 Satellite STB 000 003 008 013 SET-TOP BOX Brand Code ALPHASTAR 023 ANAM 043 CHANNEL MASTER 018 034 CROSSDIGITAL 019 CHAPARRAL 035 DIRECT TV 015 016 017 019 022 045 060 061 062 065 066 067 068 DAEWOO 074 DISH NETWORK SYSTEM 069 070 DISHPRO 069 DRAKE 018 024 032 DX ANTENNA 027 ECHOSTAR 025 069 070 071 EXPRESSVU 069 GOI 069 GE 065 GENERAL INSTRUMENT 046 047 048 063 064 HTS 069 HOME CABLE 056 HITACHI 022 HUGHES NETWORK 015 017 IQ 020 IQ PRISM 020 JANEIL 059 JERROID 063 JVC 069 070 LG(Goldstar) 044 073 Brand Code MAGNAVOX 016 021 036 038 039 040 041 042 MEMOREX 016 MOTOROLA 064 MACOM 018 MITSUBISHI 015 NEXT LEVEL 047 048 064 PHILIPS 015 016 017 021 033 036 038 039 040 041 042 067 PRIMESTAR 046 049 050 063 PANASONIC 058 059 061 062 PAYSAT 016 PROSCAN 065 066 RCA 051 052 053 065 066 RADIOSHACK 064 REALISTIC 057 STAR TRAK 026 STS 020 027 SKY 031 SKY LIFE 005 006 007 SHACK 064 STAR CHOICE 064 SONY 054 060 TOSHIBA 015 017 028 029 030 072 ULTIMATE TV 060 066 UNIDEN 016 021 037 055 056 057 ZENITH 024 031 068

To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/ Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. 1. Press the MENU button to display the menu. Press the▲ or ▼ button to select “Input”, then press the ENTER button. 2. Press the ENTER button to select "Source List". Press the ▲ or ▼ button to select signal source, then press the ENTER button. You can choose between the following sets of jacks: AV1, S-Video1, Component1, Component2, PC, HDMI1, or HDMI2 on the TV’s rear panel and AV2, S-Video2, or HDMI3 on the TV’s side panel. HDMI1, HDMI2, HDMI3 input can only be selected when the external device is turned on and connected via HDMI. You can choose only those external devices that are connected to the TV. Press the SOURCE button on the remote control to view an external signal source. To Edit the Input Source Name Name the device connected to the input jacks to make your input source selection easier. 1. Press the MENU button to display the menu. Press the▲ or ▼ button to select “Input”, then press the ENTER button. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button. 2. Press the ▲ or ▼ button to select "AV1", "AV2", "S-Video1", "S-Video2", "Component1", "Component2", "PC", "HDMI1", "HDMI2" or "HDMI3" input jack, then press the ENTER button. 3. Press the ▲ or ▼ button to select "VCR", "DVD", "D-VHS", "Cable STB", "HD STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver", "Game", "Camcorder", "DVD Combo", "PC", "VOD STB" or "TV" input source, then press the ENTER button. Press the EXIT button to exit. When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 1 port, you should set the" HDMI1" mode to "PC" in the "Edit Name" of the "Input" mode. If the "HDMI1" mode is not PC, it works depending on the TV setting. Input Source List : TV ► Edit Name ► WISELINK Anynet+ (HDMI-CEC) TV Move Enter Return Source List TV Move Enter Return TV AV1 : ---- AV2 : ---- S-Video1 : ---- S-Video2 : ---- Component1 : ---- Component2 : ---- ▼More Input Source List : TV ► Edit Name ► WISELINK Anynet+ (HDMI-CEC) TV Move Enter Return Edit Name TV Move Enter Return AV1 : ---- AV2 : ---- S-Video1 : ---- S-Video2 : ---- Component1 : ---- Component2 : ---- ▼More Edit Name TV Move Enter Return AV1 : ---- AV2 : ---- S-Video1 : ---- S-Video2 : ---- Component1 : ---- Component2 : ---- ▼More ---- VCR DVD D-VHS Cable STB HD STB Satellite STB PVR STB ▼

Using Automatic Picture Settings Your TV has Three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory. You can activate either Dynamic, Standard, Movie by making a selection from the menu. 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. 2. Press the ENTER button to select "Mode". Press the ▲ or ▼ button to select the "Dynamic", "Standard", "Movie" picture setting. Press the ENTER button.  Choose Dynamic to increase the clarity and sharpness of the picture.  Choose Standard for the standard factory settings.  Choose Movie for a natural Image without picture enhancements. 3. Press the ▲ or ▼ button to select "Contrast", "Brightness", "Sharpness", "Color", or "Tint(G/R)", then press the ENTER button. 4. Press the ◄ or ► button to decrease or increase the value of a particular item. For example, if you select "Contrast", pressing the ► button increases it. Press the ENTER button. Press the EXIT button to exit. When you make changes to Contrast, Brightness, Sharpness, Color and Tint(G/R), the OSD will be adjusted accordingly. When in PC mode, Tint, Sharpness, and Color are not available. Each adjusted setting will be stored separately according to its input mode. Press the P.MODE button on the remote control repeatedly to select the desired picture mode. Picture Control Move Enter Return Mode : Dynamic ► Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Balck light 10 ▼More Picture TV 50 ▲ Contrast ▼ Move Adjust Return Move Enter Return Mode : Dynamic Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Balck light 10 ▼More Picture TV Dynamic Standard Movie Move Enter Return Mode : Dynamic ► Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Balck light 10 ▼More Picture TV

Adjusting the Color Tone You can change the color of the entire screen according to your preference. 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ▲ or ▼ button to select "Color Tone", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Cool2", "Cool1", "Normal" or "Warm1", or "Warm2". Press the ENTER button. When the picture mode is set to "Dynamic" or "Standard", "Warm1" and "Warm2" cannot be selected. "Movie" mode is only available. Each adjusted setting will be stored separately according to its input mode. Move Enter Return ▲More Color Tone : Cool2 ► Detailed settings ► Size : 16 : 9 ► Digital NR : Low ► Active Color : On ► DNle : On ► Reset : OK ► Picture TV Move Enter Return ▲More Color Tone : Cool2 Detailed settings Size : 16 : 9 Digital NR : Low Active Color : On DNle : On Reset : OK Picture TV Cool2 Cool1 Normal Warm1 Warm2 Activating Backlight You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10) 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ▲ or ▼ button to select “Backlight”, then press the ENTER button. 3. Press the ◄ or ► button to decrease or increase the value of the backlight brightness. Press the ENTER button. Press the EXIT button to exit. Each adjusted setting will be stored separately according to its input mode. Move Enter Return Mode : Dynamic ► Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Balcklight 10 ▼More Picture TV 5 ▲ Balcklight ▼ Move Adjust Return Move Enter Return ▲More Color Tone : Cool2 Detailed settings Size : 16 : 9 Digital NR : Low Active Color : On DNle : Off Reset : OK Picture TV OK Cancel Resetting the Picture Settings to the Factory Defaults 1. Press the ▲ or ▼ button to select "Reset", then press the ENTER button. Press the ▲ or ▼ button to select “Cancel” or “OK” then press the ENTER button. Press the EXIT button to exit. Each mode can be reset.

You can set detailed picture settings. Activating Detailed Settings 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ENTER button to select “Mode” Press the ▲ or ▼ button to select "Standard" or "Movie", then press the ENTER button. 3. Press the ▲ or ▼ button to select “Detailed settings”, then press the ENTER button. Detailed Settings is available in Standard or Movie mode. If DNIe is Off, the Detailed Settings cannot be selected when the Picture mode is in Standard mode. Activating Black adjust You can directly select the black level on the screen to adjust the screen depth. 4. Press the ▲ or ▼ button to select “Black adjust”, then press the ENTER button. 5. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”. Press the ENTER button.  Off: Turns off the black adjustment function.  Low: Sets the black color depth to low.  Medium: Sets the black color depth to medium.  High: Sets the black color depth to high. Activating Dynamic Contrast You can adjust the screen contrast so that the optimal contrast is provided. 6. Press the ▲ or ▼ button to select “Dynamic Contrast”, then press the ENTER button. 7. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”. Press the ENTER button.  Off: Turns off the dynamic contrast adjustment function.  Low: Sets the dynamic contrast to low.  Medium: Sets the dynamic contrast to medium.  High: Sets the dynamic contrast to high. Adjusting the Detailed Settings Move Enter Return Black Adjust : Off ► Dynamic Contrast : Off ► Gamma : 0 ► Color Space : Auto ► White Balance ► My Color Control ► Edge Enhancement : Off ► XVYCC : Off ► Detailed Settings TV Move Enter Return Black Adjust : Off Dynamic Contrast : Off Gamma : 0 Color Space : Auto White Balance My Color Control Edge Enhancement : Off XVYCC : Off Detailed Settings TV Off Low Medium High Move Enter Return Black Adjust : Off ► Dynamic Contrast : Off ► Gamma : 0 ► Color Space : Auto ► White Balance ► My Color Control ► Edge Enhancement : Off ► XVYCC : Off ► Detailed Settings TV Move Enter Return Black Adjust : Off Dynamic Contrast : Off Gamma : 0 Color Space : Auto White Balance My Color Control Edge Enhancement : Off XVYCC : Off Detailed Settings TV Off Low Medium High Move Enter Return ▲More Color Tone : Cool2 ► Detailed settings ► Size : 16 : 9 ► Digital NR : Low ► Active Color : On ► DNle : On ► Reset : OK ► Picture TV Move Enter Return Mode : Movie ► Contrast 80 Brightness 45 Sharpness 20 Color 50 Tint G 50 R 50 Balcklight 5 ▼More Picture TV

Move Enter Return R-Offset 15 G-Offset 15 B-Offset 15 R-Gain 15 G-Gain 15 B-Gain 15 Reset White Balance TV Activating Gamma You can adjust the Primary Color (Red, Green Blue) Intensity. (-3 ~ +3) 8. Press the ▲ or ▼ button to select “Gamma”, then press the ENTER button. 9. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. Changing the Color Space Color space is a color matrix composed of red, green, and blue colors. Select your favorite color space to experience the most natural color. 10. Press the ▲ or ▼ button to select “Color Space”, then press the ENTER button. 11. Press the ▲ or ▼ button to select “Auto” or “Wide”. Press the ENTER button.  Auto : Auto Color Space automatically adjusts to the most natural color tone based on program sources.  Wide : Wide Color Space offers deep and rich color tone. Activating White Balance You can adjust the color temperature for more natural picture colors. 12. Press the ▲ or ▼ button to select “White Balance”, then press the ENTER button. 13. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 14. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button.  R-Offset: Adjusts the red color darkness.  G-Offset: Adjusts the green color darkness.  B-Offset: Adjusts the blue color darkness.  R-Gain: Adjusts the red color brightness.  G-Gain: Adjusts the green color brightness.  B-Gain: Adjusts the blue color brightness.  Reset: The previously adjusted white balance will be reset to the factory defaults. Changing the adjustment value will refresh the adjusted screen. Move Enter Return Black Adjust : Off ► Dynamic Contrast : Off ► Gamma : 0 ► Color Space : Auto ► White Balance ► My Color Control ► Edge Enhancement : Off ► XVYCC : Off ► Detailed Settings TV 0 Adjust Return Gamma Move Enter Return Black Adjust : Off ► Dynamic Contrast : Off ► Gamma : 0 ► Color Space : Auto ► White Balance ► My Color Control ► Edge Enhancement : Off ► XVYCC : Off ► Detailed Settings TV Move Enter Return Black Adjust : Off Dynamic Contrast : Off Gamma : 0 Color Space : Auto White Balance My Color Control Edge Enhancement : Off XVYCC : Off Detailed Settings TV Auto Wide Move Enter Return Black Adjust : Off ► Dynamic Contrast : Off ► Gamma : 0 ► Color Space : Auto ► White Balance ► My Color Control ► Edge Enhancement : Off ► XVYCC : Off ► Detailed Settings TV 15 ▲ R-Offset ▼ Move Adjust Return

Activating My Color Control This setting can be adjusted to suit your personal preferences. When using the My Color Control Feature, the current picture remains in movement. 15. Press the ENTER button to select “My Color Control”. 16. Press the ▲ or ▼ button to select “Pink”, “Green”, “Blue”, “White” or “Reset”. Press the ENTER button. 17. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button.  Pink: Darkens or lightens the pink color  Green: Darkens or lightens the green color  Blue: Darkens or lightens the blue color  White: Darkens or lightens the white color  Reset: The previously adjusted colors will be reset to the factory defaults. Changing the adjustment value will refresh the adjusted screen. Activating Edge Enhancement You can emphasize object boundaries in the picture. 18. Press the ▲ or ▼ button to select “Edge Enhancement”, then press the ENTER button. 19. Press the ▲ or ▼ button to select “Off” or “On”. Press the ENTER button. Move Enter Return Pink 15 Green 15 Blue 15 White 15 Reset My Color Control TV Move Enter Return Black Adjust : Off ► Dynamic Contrast : Off ► Gamma : 0 ► Color Space : Auto ► White Balance ► My Color Control ► Edge Enhancement : Off ► XVYCC : Off ► Detailed Settings TV 15 ▲ Pink ▼ Move Adjust Return Move Enter Return Black adjust : Off Dynamic Contrast : Off Gamma : 0 Color Space : Auto White Balance My Color Control Edge Enhancement : Off XVYCC : Off ► Detailed Settings TV Off On Activating xvYCC The traditional TVs couldn’t clearly implement sharp, solid, and texture images.This TV can implement those effects using the xvYCC signals, which support extended color space. The traditional TVs couldn’t also implement part of colors for movie contents. This TV can implement the same colors as in the films using the xvYCC signals. Accordingly you can enjoy powerful color presentation of movies with your TV. 20. Press the ▲ or ▼ button to select “XVYCC”, then press the ENTER button. 21. Press the ▲ or ▼ button to select “Off” or “On”. Press the ENTER button. Press the EXIT button to exit. Only available in HDMI and Component on Movie option. If xvYCC function is active, PIP cannot be selected. Move Enter Return Black Adjust : Off Dynamic Contrast : Off Gamma : 0 Color Space : Auto White Balance My Color Control Edge Enhancement : Off XVYCC : Off ► Detailed Settings TV Off On Black adjust : Off ► Dynamic Contrast : Off ► Gamma : 0 ► Color Space : Auto ► White Balance ► My Color Control ► Edge Enhancement : Off ► XVYCC : Off ► Detailed Settings TV Move Enter Return Black Adjust : Off ► Dynamic Contrast : Off ► Gamma : 0 ► Color Space : Auto ► White Balance ► My Color Control ► Edge Enhancement : Off ► XVYCC : Off ► Detailed Settings TV Move Enter Return

Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible. 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. 2. Press the ▲ or ▼ button to select "Size", then press the ENTER button. 3. Press the ▲ or ▼ button to select the screen format you want. Press the ENTER button. Press the EXIT button to exit. • 16:9 : Sets the picture to 16:9 wide mode. • Zoom1 : Magnifies the size of the picture on the screen. • Zoom2 :Magnifies the size of the picture more than “Zoom1”. • Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen. • 4:3 : Sets the picture to 4:3 normal mode. • Just Scan : Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p), Component (720p/1080i/1080p) or DTV (1080i) signals are input. Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size. If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be burned onto the screen. View the TV in 16:9 mode as much as possible. HD (High Definition) 16:9 - 1080i/1080p (1920x1080), 720p (1280x720) 16:9 Sets the picture to 16:9 wide mode. Zoom1 The screen size when Wide screen is vertically enlarged. Zoom2 The screen size when the Zoom1 screen is vertically enlarged. Wide Fit Enlarges the aspect ratio of the picture to fit the entire screen. 4:3 Sets the picture to 4:3 normal mode. Just Scan Use the function to see the full image without any cutoff when HDMI(720p/1080i/1080p), Component (720p/1080i/1080p) or DTV (1080i) signals are input. • In TV, VIDEO, S-VIDEO and all COMPONENT (480i, 480p) modes, all screen modes can be selected. (16:9, Zoom1, Zoom2, 4:3). • You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV(1080i), Component (720p, 1080i, 1080p) or HDMI (720p, 1080i, 1080P) mode. • In PC modes, only 16:9 & 4:3 modes can be selected. • You must select Zoom with P.SIZE button on the remote if you want to move the Zoom 1 or 2 picture up or down. • When watching a DTV’s HD signal, you can use Wide Fit. Horizontal zoom (Wide Fit) sets the optical picture format by expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not support all external devices (DVD, VCR etc.). • When Double ( , ) mode has been set in PIP, the Picture Size cannot be set. Changing the Screen Size Move Enter Return 16 : 9 Zoom1 ► Zoom2 ► Wide Fit ► 4 : 3 Just Scan Size TV Move Enter Return ▲More Color Tone : Cool2 ► Detailed settings ► Size : 16 : 9 ► Digital NR : Low ► Active Color : On ► DNle : On ► Reset : OK ► Picture TV

1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. 2. Press the ▲ or ▼ button to select "Active Color", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Off" or "On" Press the ENTER button. Press the EXIT button to exit. "Active Color" is available only in "Dynamic" mode. This function doesn’t work when the Input Source is PC. Setting the Active Color If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture. Move Enter Return Picture TV Move Enter Return ▲More Color Tone : Cool2 ► Detailed settings ► Size : 16 : 9 ► Digital NR : Low ► Active Color : On ► DNle : On ► Reset : OK ► Picture TV Move Enter Return ▲More Color Tone : Cool2 Detailed settings Size : 16 : 9 Digital NR : Low Active Color : Off DNle : Off Reset : OK Picture TV Off On DNIe (Digital Natural Image engine) This TV includes the the DNIe function to provide high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. 2. Press the ▲ or ▼ button to select "DNIe", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Off", "Demo" or "On", then press the ENTER button. • Off: Switches off the DNIe mode. • Demo: The screen before applying "DNIe" appears on the right screen. The screen after applying "DNIe" appears on the left screen. • On: Switches on the DNIe mode. Press the EXIT button to exit. DNIeTM (Digital Natural Image engine) This feature brings you a more detailed image with 3D noise reduction and detailed, contrast and white enhancement. This function doesn’t work when the Input Source is PC. The DNle function is not supported in the Movie mode. Move Enter Return ▲More Color Tone : Cool2 ► Detailed settings ► Size : 16 : 9 ► Digital NR : Low ► Active Color : On ► DNle : On ► Reset : OK ► Picture TV Move Enter Return ▲More Color Tone : Cool2 Detailed settings Size : 16 : 9 Digital NR : Low Active Color : Off DNle : Off Reset : OK Picture TV Off Demo On

Freezing the Picture 1. Press the STILL button to freeze a moving picture. Normal sound will still be heard. Press again to cancel. While V-Chip is in operation, the Still function cannot be used. Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Film Mode", then press the ENTER button. 3. Press the ▲ or ▼ button to select "On" or "Off", then press the ENTER button. Press the EXIT button to exit. Film mode is supported in TV, VIDEO, S-VIDEO, and COMPONENT 480i. Setup ▲ More Film Mode : Off ► Wall-Mount Adjustment ► PIP ► Function Help : Off ► SW Upgrade ► TV Move Enter Return Setup ▲ More Film Mode : Off Wall-Mount Adjustment PIP Function Help : Off SW Upgrade TV Move Enter Return Off On 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select “HDMI Black Level”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Normal”, “Low ”, then press the ENTER button. • Normal: The screen gets brighter. • Low: The screen gets darker. This function is active only when the external input connects to HDMI(RGB signals). HDMI Black level function may not be compatible with or external devices. Press the EXIT button to exit. Setting the HDMI Black Level You can select the black level on the screen to adjust the screen depth. Setup ▲More Blue Screen : Off ► Melody : Off ► PC ► Home theater PC : Off ► Energy Saving : Off ► HDMI Black Level :Normal ► ▼ More TV Move Enter Return Setup ▲More Blue Screen : Off Melody : Off PC Home theater PC : Off Energy Saving : Off HDMI Black Level :Normal ▼ More TV Move Enter Return Normal Low

Viewing Picture-in-Picture This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen, and a different one in the PIP screen. Please see ‘PIP Settings’below for detaileds. You can use the PIP feature to simultaneously watch two video sources. (See page 37 to select the PIP picture sound.) While V-Chip (See page 56) is in operation, the PIP function cannot be used. While xvYCC (See page 27) is in operation, the PIP function cannot be used. Activating Picture-in-Picture 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select "PIP", then press the ENTER button. 2. Press the ENTER button again. Press the▲ or ▼ button to select "On", then press the ENTER button. If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear. You can view Analog TV broadcasts on the PIP screen (sub-picture) when the main picture is from an external device connected to HDMI1,2,3, Component1,2, or PC Main picture Sub picture Component 1,2 HDMI 1,2,3 PC Analog TV broadcasts only Alternately, you can press the PIP button on the remote control repeatedly to activate or deactivate the PIP. Move Enter Return PIP : Size : Position : Channel : Cable 3 PIP TV Off On Changing the PIP Channel 3. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select the desired channel in the PIP window. Press the ENTER buttons. MAIN: PC / HDMI 1,2,3 / Component 1,2 PIP: TV(Analog) Alternatly, you can press the PIP Channel buttons on the remote control. Move Enter Return PIP : On ► Size : ► Position : ► Channel : Cable 3 ► PIP TV Move Enter Return PIP : On Size : Position : Channel : Cable 3 PIP TV ▲ 3 ▼ Setup ▲ More Film Mode : Off ► Wall-Mount Adjustment ► PIP ► Function Help : Off ► SW Upgrade ► TV Move Enter Return

Changing the Position of the PIP Window Changing the Size of the PIP Window Move Enter Return PIP : On Size : Position : Channel : Cable 3 PIP TV Move Enter Return PIP : On ► Size : ► Position : ► Channel : Cable 3 ► PIP TV Move Enter Return PIP : On ► Size : ► Position : ► Channel : Cable 3 ► PIP TV 4. Press the ▲ or ▼ button to select “Position”, then press the ENTER button. Press the ▲ or ▼ button to select the desired channel in the PIP window. Press the ENTER buttons. In Double Window ( ) and Double Wide ( ) modes, "Position" cannot be selected. 5. Press the ▲ or ▼ button to select “Size”, then press the ENTER button. Press the ▲ or ▼ button to select the desired channel in the PIP window. Press the ENTER buttons. Press the EXIT button to exit. If the main picture is in PC and HDMI 1 mode, Size is not available. You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. You can adjust picture position only by using the size menu. Move Enter Return PIP : On Size : Position : Channel : Cable 3 PIP TV

Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the "automatic" settings.) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Equalizer", then press the ENTER button. 3. Press the ◄ or ► button to select a particular frequency to adjust. Press the ▲ or ▼ button to increase or decrease the level of the particular frequency. Press the ENTER button. Press the EXIT button to exit. • L/R Sound Balance Adjustment: To adjust the sound balance of the L/R speakers. • Bandwidth Adjustment (100Hz, 300Hz, 1K, 3K, 10K): To adjust the level of different bandwidth frequencies. If you make any changes to the equalizer settings, the sound mode is automatically switched to the "Custom" mode. Using Automatic Sound Settings Your TV has automatic sound settings ("Standard", "Music", "Movie", "Speech" and "Custom") that are preset at the factory. Or, you can select "Custom", which automatically recalls your personalized sound settings. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Press the ENTER button to select "Mode". Press the ▲ or ▼ button to select "Standard", "Music", "Movie", "Speech" or "Custom" sound setting, then press the ENTER button. Press the EXIT button to exit. • Choose Standard for the standard factory settings. • Choose Music when watching music videos or concerts. • Choose Movie when watching movies. • Choose Speech when watching a show that is mostly dialog (i.e., news). • Choose Custom to recall your personalized settings (see “Customizing the Sound”). Press the S.MODE button on the remote control repeatedly to select one of the sound settings. Sound Control Move Adjust Return Equalizer TV R L 100Hz + - 0 300Hz 1K 3K 10K Balance Move Enter Return Mode : Custom ► Equalizer ► SRS TruSurround XT : Off ► Multi-Track Options ► Auto Volume : Off ► Internal Mute : Off ► Sound Select : Main ► Reset Sound TV Move Enter Return Mode : Custom ► Equalizer ► SRS TruSurround XT : Off ► Multi-Track Options ► Auto Volume : Off ► Internal Mute : Off ► Sound Select : Main ► Reset Sound TV + - 0 Move Enter Return Mode : Custom Equalizer SRS TruSurround XT : Off Multi-Track Options Auto Volume : Off Internal Mute : Off Sound Select : Main Reset Sound TV Standard Music Movie Speech Custom

Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Press the ▲ or ▼ button to select "SRS TruSurround XT", then press the ENTER button. 3. Press the ▲ or ▼ button to select "On" or "Off", then press the ENTER button. Press the EXIT button to exit. Press the SRS button on the remote control to select "On" or "Off". 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. Quick way to access the MTS menu: Just press the “MTS” button on the remote control. You can listen in a language other than your chosen language by pressing the MTS button. 2. Press the ▲ or ▼ button to select "“Multi-Track Options", then press the ENTER button. 3. Press the ENTER button to select “Preferred Language”. Press the ▲ or ▼ button to choose the language (English, Spanish or French) you want, then press the ENTER button. Press the EXIT button to exit. "Multi track option" is available only in TV mode You can only select the language from among the actual languages being broadcast. You can listen in a language other than the favorite language by pressing the MTS button on the remote control. Preferred Language Choosing a Multi-Channel Sound (MTS) track - Digital The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program. TRADEMARK & LABEL LICENSE NOTICE TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Move Enter Return Mode : Custom ► Equalizer ► SRS TruSurround XT : On ► Multi-Track Options ► Auto Volume : Off ► Internal Mute : Off ► Sound Select : Main ► Reset Sound TV Move Enter Return Mode : Custom Equalizer SRS TruSurround XT : Off Multi-Track Options Auto Volume : Off Internal Mute : Off Sound Select : Main Reset Sound TV Off On Move Enter Return Mode : Custom ► Equalizer ► SRS TruSurround XT : On ► Multi-Track Options ► Auto Volume : Off ► Internal Mute : Off ► Sound Select : Main ► Reset Sound TV Move Enter Return Preferred Language : English Multi-Track Sound : Stereo Multi-Track Options TV English Spanish French Enter Return Preferred Language : English ► Multi-Track Sound : Stereo ► Multi-Track Options TV

Automatic Volume Control 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Auto Volume", then press the ENTER button. 3. Press the ▲ or ▼ button to set Auto Volume "On" or "Off" then press the ENTER button. Press the EXIT button to exit. Reduces the differences in volume level among broadcasters. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Press the ▲ or ▼ button to select "“Multi-Track Options", then press the ENTER button. 3. Press the ▲ or ▼ button to select “Multi-Track Sound”, then press the ENTER button. Press the ▲ or ▼ button to select a setting you want, then press the ENTER button. Press the EXIT button to exit. • Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. • Choose Stereo for channels that are broadcasting in stereo. • Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation. "Multi track option" is available only in TV mode Press the MTS buttons on the remote control repeatedly to select “Mono”, “Stereo” or “SAP”. Multi-Track Sound Choosing a Multi-Channel Sound (MTS) track - Analog Move Enter Return Preferred Language : English Multi-Track Sound : Stereo Multi-Track Options TV Mono Stereo SAP Enter Return Preferred Language : English ► Multi-Track Sound : Stereo ► Multi-Track Options TV Move Enter Return Mode : Custom ► Equalizer ► SRS TruSurround XT : On ► Multi-Track Options ► Auto Volume : Off ► Internal Mute : Off ► Sound Select : Main ► Reset Sound TV Move Enter Return Mode : Custom Equalizer SRS TruSurround XT : On Multi-Track Options Auto Volume : Off Internal Mute : Off Sound Select : Main Reset Sound TV Off On

Selecting the Internal Mute 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Internal Mute", then press the ENTER button. 3. Press the ▲ or ▼ button to select “On”, then press the ENTER button. Press the EXIT button to exit. When Internal Mute is set to “On”, Sound menus except Multi-track Options cannot be adjusted. The VOL , VOL and MUTE buttons do not operate when the Internal Mute is set to On. Sound output from the TV speakers is muted. Move Enter Return Mode : Custom ► Equalizer ► SRS TruSurround XT : On ► Multi-Track Options ► Auto Volume : Off ► Internal Mute : Off ► Sound Select : Main ► Reset Sound TV Move Enter Return Mode : Custom Equalizer SRS TruSurround XT : On Multi-Track Options Auto Volume : Off Internal Mute : Off Sound Select : Main Reset Sound TV Off On TV'S Internal Speakers Audio Out (Optical, L/R Out) to Sound System RF AV, S-Video Component, PC, HDMI RF AV, S-Video Component, PC, HDMI Internal Mute Off Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output Internal Mute On Mute Mute Mute Sound Output Sound Output Sound Output Video No Signal Mute Mute Mute Mute Mute Mute When “Internal mute” is set to “On”, Sound menus except “Multi-Track Options” cannot be adjusted. Adjusting the TV On/Off Melody Sound 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Melody", then press the ENTER button. 3. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium”, “High”, then press the ENTER button. • Off : Turns off the melody function. • Low : Sets the melody volume to low. • Medium : Sets the melody volume to medium. • High : Sets the melody volume to high. Press the EXIT button to exit. A melody sound can be set to come on when the TV is powered On or Off. TRADEMARK & LABEL LICENSE NOTICE Manufactured under license from Dolby Laboratorories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Setup ▲More Blue Screen : Off ► Melody : Off ► PC ► Home Theater PC : Off ► Energy Saving : Off ► HDMI Black Level :Normal ► ▼ More TV Move Enter Return Setup ▲More Blue Screen : Off Melody : Off PC Home Theater PC : Off Energy Saving : Off HDMI Black Level :Normal ▼ More Off Low Medium High Move Enter Return TV

Resetting the Sound Settings to the Factory Defaults 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Reset”, then press the ENTER button. Press the EXIT button to exit. If Game Mode is On, the Reset Sound function is activated (refer to page 51). Selecting the Reset function resets the equalizer setting to the factory defaults. You can connect a set of headphones to your set if you wish to watch a TV program without disturbing the other people in the room. Connecting Headphones When you insert the head set jack into the corresponding port, you can operate only “Auto Volume” in Sound menu. Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. The headphone volume and TV volume are adjusted differently. 10 Move Enter Return Mode : Custom ► Equalizer ► SRS TruSurround XT : On ► Multi-Track Options ► Auto Volume : Off ► Internal Mute : Off ► Sound Select : Main ► Reset Sound TV Listening to the Sound of the Sub (PIP) Picture 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Sound Select”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Main” or “Sub”, then press the ENTER button. Press the EXIT button to exit. • Main: Used to listen to the sound of the main picture.. • Sub: Used to listen to the sound of the sub picture. You can select this option when “PIP” is set to “On”. When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. Move Enter Return Mode : Custom ► Equalizer ► SRS TruSurround XT : On ► Multi-Track Options ► Auto Volume : Off ► Internal Mute : Off ► Sound Select : Main ► Reset Sound TV Move Enter Return Mode : Custom Equalizer SRS TruSurround XT : On Multi-Track Options Auto Volume : Off Internal Mute : Off Sound Select : Main Reset Sound TV Main Sub

Channel Control Selecting the Antenna 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ENTER button to select “Antenna”. Press the ▲ or ▼ button to select “Air” or “Cable”,then press the ENTER button. Press the EXIT button to exit. If the antenna is connected to ANT 1 IN (AIR), select “Air” and if it is connected to ANT 2 IN (CABLE), select “Cable”. If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the antenna input you want. If the antenna input is not selected properly, noise may appear on the screen. Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Channel Move Enter Return TV Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Air Cable or Clearing Scrambled Channels - Digital 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Clear Scrambled Channel", then press the ENTER button. It searches scrambled channels, which are to be removed from the list. To stop searching scrambled channels; Press the ENTER button to select Stop. Press the ◄ button to select Yes, then press the ENTER button. 3. When the scrambled channel searching is completed, press the ENTER button. Press the EXIT button to exit. Only cable mode is available. The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed. It removes the scrambled channels from the list by tuning the digital cable channels. This process may take up to 20~30 minutes. Clear Scrambled Channel Stop Removing scrambled channel. DTV Cable 3-1 50% Enter Return Clear Scrambled Channel Scrambled Channel Searching is completed. 0 Channels are deleted. Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Return Press the ANTENNA button on the remote control.

Adding and Erasing Channels You can add or delete a channel to display the channels you want. To use the Channel List function, first run Auto Program. All ► Added ► Favorite ► Default List Mode : All ► Channel List Move Enter Return TV 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Channel List", then press the ENTER button. 3. Press the ENTER button to select “All”. 4. Press the ◄, ►, ▲ or ▼ button to select a channel to delete, then press the ENTER button. Press the ▲ or ▼ button to select “Delete”, then press the ENTER button to delete the channel. The mark will disappear. 5. Press the ◄, ►, ▲ or ▼ button to select a channel to add, then press the ENTER button. Press the ▲ or ▼ button to select “Add”, then press the ENTER button to add the channel. The mark will appear and the channel will be added. Press the EXIT button to exit. All selected channels will be shown on “Added" menu. • P.MODE (Red) button: Press repeatedly to select “All”, “Added” or “Favorite”. • S.MODE (Green) button: Press to add all channels deleted. • STILL (Yellow) button: Press to delete all channels memorized. Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Channel List / All Move Enter Return DTV Air 2-1 Air3 Air4 Air 5 Air 6 Air 7 DTV Air 7-1 Air 8 Air 9 Air 10 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 Air 12 DTV Air 13-1 DTV Air 13-2 DTV Air 13-3 DTV Air 13-4 Air 5 1 / 2 Watch Add Delete Favorite List Mode Delete All Add All CH Channel List / All DTV Air 2-1 Air3 Air4 Air 5 Air 6 Air 7 DTV Air 7-1 Air 8 Air 9 Air 10 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 Air 12 DTV Air 13-1 DTV Air 13-2 DTV Air 13-3 DTV Air 13-4 List Mode Air 5 1 / 2 Move Enter Page Return Delete All Add All Channel List / All Move Enter Return DTV Air 2-1 Air3 Air4 Air 5 Air 6 Air 7 DTV Air 7-1 Air 8 Air 9 Air 10 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 Air 12 DTV Air 13-1 DTV Air 13-2 DTV Air 13-3 DTV Air 13-4 Air 5 1 / 2 Watch Add Delete Favorite List Mode Delete All Add All CH Channel List / All Move Enter Page Return DTV Air 2-1 Air3 Air4 Air 5 Air 6 Air 7 DTV Air 7-1 Air 8 Air 9 Air 10 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 Air 12 DTV Air 13-1 DTV Air 13-2 DTV Air 13-3 DTV Air 13-4 Air 5 1 / 2 List Mode Delete All Add All

To Set-Up Your Favorite Channels 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Channel List", then press the ENTER button . 3. Press the ▲ or ▼ button to select "All" or "Added", then press the ENTER button. 4. Press the ◄, ►, ▲ or ▼ button to select your favorite channels to watch among the labeled channels. Then press the ENTER button. Press the ▲ or ▼ button to select “Favorite”, then press the ENTER button. The " " symbol will be highlighted and the channel will be set as a Favorite. To cancel your Favorite channel selection, press the ENTER button until the " " symbol is no longer highlighted. Press the EXIT button to exit. Only memorized channels can be set as favorite channels. All favorite channels will be shown in the “Favorite” menu. To select the favorite channels you have set up, press the FAV.CH button on the remote control. You can set channels you watch frequently as favorites. All Added Favorite Default List Mode : All ► Channel List Move Enter Return TV Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Channel List / Added DTV Air 2-1 Air3 Air4 Air 5 Air 6 Air 7 DTV Air 7-1 Air 8 Air 9 Air 10 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 Air 12 DTV Air 13-1 DTV Air 13-2 DTV Air 13-3 DTV Air 13-4 Air 5 1 / 2 Watch Add Delete Favorite Move Enter Return List Mode Delete All CH Channel List / Added Move Enter Page Return DTV Air 2-1 Air3 Air4 Air 5 Air 6 Air 7 DTV Air 7-1 Air 8 Air 9 Air 10 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 Air 12 DTV Air 13-1 DTV Air 13-2 DTV Air 13-3 DTV Air 13-4 Air 5 1 / 2 List Mode Delete All

Using the Channel Lists 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Channel List", then press the ENTER button. 3. Press the ▲ or ▼ button to select “Default List Mode” (the channel list you want to appear when you press CH LIST), then press the ENTER button. Press the ▲ or ▼ button to select “All”, “Added” or “Favorite” then press the ENTER button. The Channel list you have chosen will now be set. Press the EXIT button to exit. Alternately, press the CH LIST button on the remote control to bring up the Channel Lists. Displays the channel list automatically when you press CH LIST button on the remote. (Choose All, Added, or Favorite) Viewing the Channel Lists 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Channel List", then press the ENTER button. 3. Press the ▲ or ▼ button to select “All”, “Added” or “Favorite”, then press the ENTER button. 4. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. To toggle between your all channels, add channels or favorite channels, use the P.MODE (red) button on the remote control. • P.MODE (Red) button: Press repeatedly to select “All”, “Added” or “Favorite” You can display a list of all channels, added channels or your favorite channels. All Added Favorite Default List Mode : All ► Channel List Move Enter Return TV All Added Favorite All Added Favorite Default List Mode : All ► Channel List Move Enter Return TV Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV CH Channel List / All Move Enter Page Return DTV Air 2-1 Air3 Air4 Air 5 Air 6 Air 7 DTV Air 7-1 Air 8 Air 9 Air 10 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 DTV Air 10-1 DTV Air 10-2 DTV Air 10-3 Air 12 DTV Air 13-1 DTV Air 13-2 DTV Air 13-3 DTV Air 13-4 Air 5 1 / 2 List Mode Delete All Add All

Labeling Channels 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Name”, then press the ENTER button. 2. Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the ENTER button. Press the ▲ or ▼ button to select a letter, a number or a blank (Results in this sequence: A...Z, 0...9, +, -, *, /, blank). Press the ► button to switch to the next field, which will be selected. Select a second letter or digit by pressing the ▲ or ▼ button, as above. Repeat the process to select the last three digits. When you have finished, press the ENTER button to assign the new name. To erase the assigned new name, select "Clear" by pressing the ◄ or ► button, then press the ENTER button. Press the EXIT button to exit. The names of digital broadcasting channels are automatically assigned and thus cannot be assigned by users. Name Move Enter Return TV Air 2 Air 3 Air 4 Air 5 Air 6 Clear Clear Clear Clear Clear Name Move Adjust Return TV Air 2 Air 3 Air 4 Air 5 Air 6 Clear Clear Clear Clear Clear A ▲ ▼ LNA (Low Noise Amplifier) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “LNA”, then press the ENTER button. 3. Press the▲ or ▼ button to select “On”, then press the ENTER button. Press the EXIT button to exit. LNA functions only when antenna is set to Air or Cable. The LNA setting must be made separately for each channel. If the picture is noisy with the LNA set to On, select Off. If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). Channels can be labeled so that their call letters appear whenever the channel is selected. Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Channel Move Enter Return TV Off On

Fine Tuning Analog Channels 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button. 3. Press the ◄ or ► button to adjust the fine tuning. To store the fine tuning setting in the TV’s memory, press the ENTER button. If you do not store the fine-tuned channel in memory, adjustments are not saved. 4. To reset the fine tuning setting, press the ▼ button to select "Reset", then press the ENTER button. Press the EXIT button to exit. "*" will appear next to the name of fine-tuned channels. Only analog TV channels can be fine tuned. Use fine tuning to manually adjust a particular channel for optimal reception. Checking the Digital-Signal Strength 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Signal Strength”, then press the ENTER button. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. Press the EXIT button to exit Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. Signal Strength Enter Return TV OK Adjust Save Return Fine Tune Air 24 0 Reset Adjust Save Return Fine Tune Air 24 +3 Reset Move Enter Return Fine Tune Air 24 0 Reset Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► LNA : On ► Channel Move Enter Return TV Adjust Save Return Fine Tune Air 24 * +3 Reset Fine Tuned

Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on "Control Panel" on the Windows start menu. 2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear. 3. When the control panel window appears, click on "Display" and a display dialog-box will appear. 4. Navigate to the "Settings" tab on the display dialog-box. The correct size setting (resolution) Optimum: 1920 X 1080 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box. PC Display Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing. Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) IBM 720 X 400 640 X 480 31.469 31.469 70.087 59.940 28.322 25.175 - / + - / - VESA 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1920 x 1080 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 79.976 66.500 72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 75.025 60.000 31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 123.000 138.500 - / - - / - + /+ + /+ + /+ + /+ - / - - / - + /+ + /+ - / + Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) IBM 640 X 350 720 X 400 640 X 480 31.469 31.469 31.469 70.086 70.087 59.940 25.175 28.322 25.175 + /- - / + - / - VESA 800 x 600 1024 x 768 1280 x 1024 1920 x 1080 37.879 48.364 63.981 66.587 60.317 60.000 60.020 59.934 40.000 65.000 108.000 138.500 + /+ - / - + /+ + /- D-Sub Input HDMI/DVI Input

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "PC", then press the ENTER button. Change to the PC mode first. 2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER button. Press the EXIT button to exit. How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. This function does not work in DVI-Digital mode. Setting up the TV with your PC 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "PC", then press the ENTER button. Change to the PC mode first. 2. Press the ENTER button to select "Image Lock". 3. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER button. Press the ◄ or ► button to adjust the screen quality. Vertical stripes may appear or the picture may be blurry. Press the ENTER button. Press the EXIT button to exit. Adjusting the Screen Quality The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen. PC Image Lock ► Position ► Auto Adjustment ► Image Reset ► TV Move Enter Return PC Image Lock ► Position ► Auto Adjustment ► Image Reset ► TV Move Enter Return Auto Adjustment in Progress. Please Wait Setup ▲More Blue Screen : Off ► Melody : Off ► PC ► Home theater PC : Off ► Energy Saving : Off ► HDMI Black Level :Normal ► ▼ More TV Move Enter Return Image Lock Coarse 50 Fine 0 TV Move Enter Return 50 ▲ Coarse ▼ Move Adjust Return

Changing the Screen Position 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "PC", then press the ENTER button. Change to the PC mode first. 2. Press the ▲ or ▼ button to select "Position", then press the ENTER button. 3. Press the ▲ or ▼ button to adjust the V-Position. Press the ◄ or ► button to adjust the H-Position. Press the ENTER button. Press the EXIT button to exit. Initializing the Screen Position or Color Settings You can replace all image settings with the factory default valuse. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "PC", then press the ENTER button. Change to the PC mode first. 2. Press the ▲ or ▼ button to select "Image Reset", then press the ENTER button. Press the EXIT button to exit. PC Image Lock ► Position ► Auto Adjustment ► Image Reset ► TV Move Enter Return TV Adjust Enter Return Position ▲ ▲ ▲ ▲ PC Image Lock ► Position ► Auto Adjustment ► Image Reset ► TV Move Enter Return Image Reset is completed. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select “Home Theater PC”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “On” or "Off", then press the ENTER button.  Off: Turns off the settings for screen-related functions in PC input mode.  On: Turns on the settings for screen-related functions in PC input mode to provide more dynamic scenes. Press the EXIT button to exit. This function is available only in PC mode. Setting the Home Theater PC This function enables you to view higher quality pictures while in PC Mode. After setting the Home Theater PC function to On, you can go into the Detailed Settings menu and make adjustments without affecting settings in the regular TV mode. Setup ▲More Blue Screen : Off ► Melody : Off ► PC Home Theater PC : Off ► Energy Saving : Off ► HDMI Black Level :Normal ► ▼ More TV Move Enter Return Setup ▲More Blue Screen : Off Melody : Off PC Home theater PC : Off Energy Saving : Off HDMI Black Level :Normal ▼ More TV Move Enter Return Off On

Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "Time", then press the ENTER button. 2. Press the ENTER button to select "Clock". 3. Press the ENTER button to select “Clock Mode”. Press the ▲ or ▼ button to select “Manual”, then press the ENTER button. 4. Press the ▲ or ▼ button to select “Clock Set”, then press the ENTER button. 5. Press the ◄ or ► button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”, or “am/pm”. Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER button. Press the EXIT button to exit. The current time will appear every time you press the INFO button. You can set the month, day, year, hour, and minute directly by pressing the number buttons on the remote control. Time Setting Time Clock ► Sleep Timer : Off ► Timer 1 : Inactivated ► Timer 2 : Inactivated ► Timer 3 : Inactivated ► TV Move Enter Return - - / - - / - - - - / - - : - - - - Clock Clock Mode : Manual ► Clock Set ► Time Zone ► DST ► TV Move Enter Return Clock Set Set Current date and time. TV Move Adjust Return Month ▲ ▼ Day Year Hour Minute am/pm Clock Set Set current data and time. TV Month ▲ ▼ Day Year Hour Minute am/pm 1 1 2007 12 00 am Move Adjust Return Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Exit

Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "Time", then press the ENTER button. 2. Press the ENTER button to select "Clock". 3. Press the ENTER button to select “Clock Mode”. Press the ▲ or ▼ button to select “Auto”, then press the ENTER button. 4. Press the ▲ or ▼ button to select “Time Zone”, then press the ENTER button. 5. Press the ▲ or ▼ button to highlight the time zone for your local area, then press the ENTER button. 6. Press the ▲ or ▼ button to select “DST” (Daylight Saving Time), then press the ENTER button. Press the ▲ or ▼ button to select “On” or “Off”, then press the ENTER button. Press the EXIT button to exit. Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually. The Antenna or cable must be connected in order to set the time automatically. Time Clock ► Sleep Timer : Off ► Timer 1 : Inactivated ► Timer 2 : Inactivated ► Timer 3 : Inactivated ► TV Move Enter Return - - / - - / - - - - / - - : - - - - Clock Clock Mode : Manual ► Clock Set ► Time Zone DST : Off TV Move Enter Return Manual Auto Clock Clock Mode : Auto ► Clock Set ► Time Zone ► DST : Off ► TV Move Enter Return Move Enter Return Select the time zone in which you live. Time Zone Newfoundland Atlantic Eastern Central Mountain Pacific Alaska Hawaii Clock Clock Mode : Auto ► Clock Set ► Time Zone ► DST : Off ► TV Move Enter Return Clock Clock Mode : Auto Clock Set Time Zone DST : Off TV Move Enter Return On Off Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return

Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "Time", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER button. 3. Press the ▲ or ▼ button to adjust “Minute”. 4. Press the ► button to select “Activation”. Press the ▲ or ▼ button to select “On”, then press the ENTER button. Press the EXIT button to exit. Simply press the SLEEP button on the remote control for a Quick way to access the sleep timer setting. Time Clock ► Sleep Timer : Off ► Timer 1 : Inactivated ► Timer 2 : Inactivated ► Timer 3 : Inactivated ► TV Move Enter Return 1/ 1/ 2007/ 12 : 00 am Sleep Timer Set Sleep Timer. TV Move Adjust Return Minute ▲ ▼ Activation 30 On Sleep Timer Set Sleep Timer. TV Move Adjust Return Minute ▲ ▼ Activation Off

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "Time", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Timer 1,Timer 2,Timer 3 ", then press the ENTER‑button. 3. Press the ▲ or ▼ button to adjust “Hour”, then press the ► button to move to the next step. Set other items using the same method as above. Activate or Inactivate Press the ▲or▼ button Repeat Select Once, Everyday, Mon-Fri, Mon-Sat, Sat-Sun Sets the desired day(s) of the week you want the TV to turn on. Press the ▲or▼ button Volume Select the desired turn on volume level. Press the ▲or▼ button Contents When the On Timer is active, you can turn on a specific channel or play back contents such as photo or audio files. (Make sure that an USB device is connected to your TV.) Press the ▲or▼ button You can set the hour, minute and channel by pressing the number buttons on the remote control. Auto Power Off When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time. Press the EXIT button to exit. Setting the On/Off Timer Time Clock ► Sleep Timer : Off ► Timer 1 : Inactivated ► Timer 2 : Inactivated ► Timer 3 : Inactivated ► TV 1/ 1/ 2007/ 12 : 00 am Move Enter Return Selecting a Menu Language 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "Language", then press the ENTER button. 2. Press the ▲ or ▼ button to select “English”, “Español” or “Français”. Press the ENTER button. Press the EXIT button to exit. Function Description Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return Timer 1 On Time ▲ ▼ 12 00 am Inactivate Off Time 12 00 am Inactivate Repeat Once Contents Volume 10 TV Air 3 : : Move Adjust Return Contents Source ▲ ▼ TV Antenna Music Photo None None Air Channel 3 Move Adjust Return Setup Plug & Play Language : English Time Game Mode : Off V-Chip Caption Menu TransParency : High ▼More TV Move Enter Return English Español Français

Using the Game Mode When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting connecting to a game console such selecting the game menu. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Game Mode", then press the ENTER button. 3. Select "On" or "Off" by pressing the ▲ or ▼ button, then press the ENTER button. 4. Press the EXIT button to exit. Restrictions on "Game mode" (Caution) • To disconnect the game console and connect another external device, set "Game" to Off in the setup menu. • If you display the TV menu in "Game mode", the screen shakes slightly. • The mark ( ) appears on the screen which means that "Game Mode" is on with the selected source. If "Game Mode" is On • Picture Mode is automatically changed to "Standard" and users cannot change the mode. • Sound Mode is automatically changed to" Custom" and users cannot change the mode. Adjust the sound using the equalizer. • The "Reset" in the Sound menu is activated. "Reset" function initializes the "Equalizer" settings to the factory default setting. "Game Mode" is not available in regular TV/Antenna mode. If the picture is poor when external device is connected to TV, check if "Game Mode" is On. Set "Game Mode" to Off and connect external devices. Setup Plug & Play ► Language : English ► Time ► Game Mode : On ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return Setup Plug & Play Language : English Time Game Mode : Off V-Chip Caption Menu TransParency : High ▼More TV Move Enter Return Off On Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off" 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Blue Screen", then press the ENTER button. 3. Press the ▲ or ▼ button to select "On" or "Off" then press the ENTER button. Press the EXIT button to exit. Blue Screen is displayed when there is no signal from an external device, regardless of the Blue Screen Setting. Setup ▲More Blue Screen : Off ► Melody : Off ► PC ► Home theater PC : Off ► Energy Saving : Off ► HDMI Black Level :Normal ► ▼ More TV Move Enter Return Setup ▲More Blue Screen : Off Melody : Off PC Home theater PC : Off Energy Saving : Off HDMI Black Level :Normal ▼ More TV Move Enter Return Off On AV1 Game Mode

The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 3. Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to select “On”, then press the ENTER button. 4. Press the ▲ or ▼ button to select “Caption Mode”, then press the ENTER button. Press the ▲ or ▼ button to select submenu (Default, CC1~CC4 or Text1~Text4) you want, the press the ENTER button. Press the EXIT button to exit. • The default is “CC1”. • CC1: The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame. • CC2: The Special Non-Synchronous Use Captions. This channel carries data that is intended to augment information carried in the program. • CC3: Secondary Synchronous Caption Service. Alternate program-related caption data, typically second language captions. • CC4: Special Non-Synchronous Use Captions. Similar to CC2. • Text1: First Text Service. This may be various non-program related data. • Text2: Second Text Service. Additional data, usually not program related. • Text3/Text4: Third and Fourth Text Services. These data channels should be used only if Text1 and Text2 are not sufficient. The Caption feature doesn’t work in Component, HDMI or PC modes. The availability of captions depends on the program being broadcast. Press the CAPTION button on the remote control to select "On" or " Off". Viewing Closed Captions (On-Screen Text Messages) - Analog Caption Caption : Off Caption Mode : Default Caption Options TV Move Enter Return Off On Caption Caption : Off ► Caption Mode : Default ► Caption Options ► TV Enter Return Caption Caption : On ► Caption Mode : Default ► Caption Options ► TV Move Enter Return Setup Plug & Play ► Language : English ► Time ► Game Mode : On ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return Caption Caption : On Caption Mode : Default Caption Options : Off TV Move Enter Return Default CC1 CC2 CC3 CC4 Text1 Text2 Text3 Text4

The Digital Captions function operates on digital channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 3. Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to select “On”, then press the ENTER button. 4. Press the ▲ or ▼ button to select “Caption Mode”, then press the ENTER button. Press the ▲ or ▼ button to select submenu (Default, Service1~Service6, CC1~CC4 or Text1~Text4) you want, then press the ENTER button. 5. Press the ▲ or ▼ button to select “Caption Options”, then press the ENTER button. “Caption Options” are available only when “Service1~Service6” can be selected in “Caption Mode”. Service1~6 in digital caption mode may not be available depending on the broadcast. 6. Press the ▲ or ▼ button to select “Size”, then press the ENTER button. Press the ▲ or ▼ button to select the desired Caption option, then press the ENTER button. Press the ▲ or ▼ button to select the desired sub-menu options (see options below), then press ENTER . Press the EXIT button to exit. The availability of captions depends on the program being broadcast. “Default” means to follow the standard set by the broadcaster. Foreground and Background cannot be set to have the same color. Foreground Opacity and Background Opacity cannot be both set to Transparent. • Size: This option consists of “Default”, “Small”, “Standard”, and “Large”. The default is “Standard”. • Font Style: This option consists of “Default”, “Style0 ~ Style 7”. You can change the font you want. The default is “Style 0”. • Foreground Color: This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”, “Magenta”, and “Cyan”. You can change the color of the letter. The default is “White”. • Background Color: This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”, “Magenta”, and “Cyan”. You can change the background color of the caption. The default is “Black”. • Foreground Opacity: This option consists of “Default”, “Transparent”, “Translucent”, “Solid”, and “Flashing”. You can change the opacity of the letter. • Background Opacity: This option consists of “Default”, “Transparent”, “Translucent”, “Solid”,and “Flashing”. You can change the background opacity of the caption. • Return to Default: This option sets each of “Size”, “Font Style”, “Foreground Color”, “Bakcground color”, “Foreground Opacity”, and “Background Opacity” to its default. Press the CAPTION button on the remote control to select "On" or " Off". Viewing Closed Captions (On-Screen Text Messages) - Digital Caption Caption : Off Caption Mode : Default Caption Options TV Move Enter Return Off On Caption Caption : On ► Caption Mode : Default ► Caption Options ► TV Move Enter Return Caption Caption : On Caption Mode : Default Caption Options : Off TV Move Enter Return Default Service1 Service2 Service3 Service4 Service5 Service6 CC1 Caption Caption : On ► Caption Mode : Default ► Caption Options ► TV Move Enter Return Caption Options Size : Default ► Font Style : Default ► Foreground Color : Default ► Background Color : Default ► Foreground Opacity : Default ► Background Opacity : Default ► Return to Default TV Move Enter Return ▼

Menu Transparency Level Adjusts the transparency of the menu screen. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select “Menu Transparency”, then press the ENTER button. 3. Press the ▲ or ▼ button to select level, then press the ENTER button. Press the EXIT button to exit. Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return Setup Plug & Play Language : English Time Game Mode : Off V-Chip Caption Menu TransParency : Medium ▼More TV Move Enter Return High Medium Low Opaque Using the Energy Saving Feature This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving " mode option to "High" to reduce eye fatigue as well as power consumption. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Energy Saving", then press the ENTER button. Select the required option (Off, Low, Medium, High, Auto) by pressing the ▲ or ▼ button. Press the ENTER button. • Off: Turns off the energy saving function. • Low: Sets the TV to low energy saving mode. • Medium: Sets the TV to medium energy saving mode. • High: Sets the TV to high energy saving mode. • Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes. Press the EXIT button to exit. Setup ▲More Blue Screen : Off ► Melody : Off ► PC Home Theater PC : Off ► Energy Saving : Off ► HDMI Black Level :Normal ► ▼ More TV Move Enter Return Move Enter Return TV Setup ▲More Blue Screen : Off Melody : Off PC Home Theater PC : Off Energy Saving : Off HDMI Black Level :Normal ▼ More Off Low Medium High Auto Move Enter Return

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ▲ or ▼ button to select "Digital NR", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Off", "Low", "Medium", "High", "Auto". Press the ENTER button.  Off: Turns the screen noise reduction function off.  Low: Reduces screen noise at a low level.  Medium: Reduces screen noise at a medium level.  High: Reduces screen noise at a high level.  Auto: Automatically recognizes and reduces screen noise. Press the EXIT button to exit. Digital Noise Reduction Move Enter Return ▲More Color Tone : Cool2 ► Detailed settings ► Size : 16 : 9 ► Digital NR : Low ► Active Color : On ► DNle : On ► Reset : OK ► Picture TV Move Enter Return ▲More Color Tone : Cool2 Detailed settings Size : 16 : 9 Digital NR : Off Active Color : Off DNle : Off Reset : OK Picture TV Off Low Medium High Auto 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select “Function Help”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “On”, then press the ENTER button. Press the EXIT button to exit. The predetermined value of the function help is On. Setting the Function Help Displays help on the menu functions. Setup ▲ More Film Mode : Off ► Wall-Mount Adjustment ► PIP ► Function Help : Off ► SW Upgrade ► TV Move Enter Return Setup ▲ More Film Mode : Off Wall-Mount Adjustment PIP Function Help : Off SW Upgrade TV Move Enter Return Off On

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number. The default PIN number of a new TV set is “0-0-0-0”. 3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “Change PIN”, then press the ENTER button. The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the “Confirm new PIN” screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized. Press the EXIT button to exit. If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off. → Mute → 8 → 2 → 4 → Power On. Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. When the V-chip feature is activated, the PIP features do not function. Setting Up Your Personal ID Number (PIN) U.S.A Only This product is covered by the following U.S.patents :US4,930,158,US4,930,160 Move Enter Return V-Chip Lock : Off ► TV Parental Guidelines ► MPAA Rating ► Canadian English ► Canadian French ► Downloadable U.S. Rating ► Change PIN ► V-Chip TV Enter New PIN Confirm New PIN Change PIN TV Enter PIN Return Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return V-Chip Enter PIN TV * * * * Enter PIN Return

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number. 3. The “V-Chip” screen will appear. To enable the V-Chip feature, press the ENTER button so that the “V-Chip Lock” field is “On”. (Pressing the ▲ or ▼ button will alternate between “On” and “Off”.) Press the ENTER button. Press the EXIT button to exit. How to Enable/Disable the V-Chip Move Enter Return V-Chip Lock : off TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN V-Chip TV Off On 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number. How to Set up Restrictions Using the “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating. V-Chip Enter PIN TV * * * * V-Chip Enter PIN TV * * * * Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return Move Enter Return V-Chip Lock : On ► TV Parental Guidelines ► MPAA Rating ► Canadian English ► Canadian French ► Downloadable U.S. Rating ► Change PIN ► V-Chip TV Enter PIN Return Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return Enter PIN Return

3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “TV Parental Guidelines”, then press the ENTER button. 4. The “TV Parental Guidelines” screen will appear. Press the ▲ or ▼ button to select one of the six aged based categories: • TV-Y: Young children • TV-Y7: Children 7 and over • TV-G: General audience • TV-PG: Parental guidance • TV-14: Viewers 14 and over • TV-MA: Mature audience 5. At this point, one of the TV-Ratings is selected. Press the ENTER button. Depending on your existing setup, the “ ” symbol will be selected. (Blank = Unblocked, = Blocked) While “ ” is selected, press the ENTER button to block or unblock the category. To select a different TV-Rating, press the ▲ or ▼ button and then repeat the process. Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings. The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional options. See the next step to change any of the following sub-ratings: FV: Fantasy violence / D: Sexually Suggestive Dialog / L: Adult Language / S: Sexual situation / V: Violence The V-Chip will automatically block certain categories that are “more restrictive”. For example, if you block “TV-Y” category, then TV-Y7 will auto matically be blocked. Similarly, if you block the TV-G category, then all the cat egories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14, and TV-MA). The sub-ratings (D, L, S, V) work together similarly. (See next section.) 6. How to set the FV, D, L, S and V sub-ratings. First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA (See Step 4, on previous page), and press the ► button. The “ ”symbol will be displayed for each sub-rating. While “ ” is selected, press the ENTER button to go to a sub rating. Press ENTER to block the sub rating. To select a different TV-Rating, press the ▲ or ▼ button and then repeat the process. The V-chip will automatically block certain categories that are “More restrictive”. For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will automatically be blocked. 7. Press the EXIT button to clear all the screens. (Or proceed to the next section, and set up additional restrictions based on the MPAA codes.) These categories consist of two separate groups: TV-Y and TV-Y7 (young children through age 7), and TV-G through TV-MA (everybody else). The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV guidelines must be set up separately for each age group. (See next step.) Move Enter Return V-Chip Lock : On ► TV Parental Guidelines ► MPAA Rating ► Canadian English ► Canadian French ► Downloadable U.S. Rating ► Change PIN ► V-Chip TV Move Enter Return TV-Y TV-Y7 TV Parental Guidelines TV TV-G TV-PG TV-14 TV-MA ALL FV V S L D Allow All Block All Move Enter Return TV-Y TV-Y7 TV Parental Guidelines TV TV-G TV-PG TV-14 TV-MA ALL FV V S L D Allow All Block All

How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number. 3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “MPAA Rating”, then press the ENTER button. 4. The “MPAA Rating” screen will appear. Repeatedly press the ▲ or ▼ button to select a particular MPAA category. Pressing the ▲ or ▼ button will cycle through the MPAA categories: • G: General audience (no restrictions). • PG: Parental guidance suggested. • PG-13: Parents strongly cautioned. • R: Restricted. Children under 17 should be accompanied by an adult. • NC-17: No children under age 17. • X: Adults only. • NR: Not rated. Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings. While a particular category is selected, press the ENTER button to activate it. The “ ” symbol will be displayed. Press the ENTER button to block or unblock the category. The V-Chip will automatically block any category that is “more restrictive”. For example, if you block the “PG-13” category, then “R”, “NC-17” and “X” will automatically be blocked also. Press the EXIT button to exit. Move Enter Return V-Chip Lock : On ► TV Parental Guidelines ► MPAA Rating ► Canadian English ► Canadian French ► Downloadable U.S. Rating ► Change PIN ► V-Chip TV Move Enter Return MPAA Rating TV G PG PG-13 R NC-17 X NR Block Allow All Block All Move Enter Return MPAA Rating TV G PG PG-13 R NC-17 X NR Block Allow All Block All V-Chip Enter PIN TV * * * * Enter PIN Return Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return

How to Set up Restrictions Using the ‘Canadian English’ 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number. 3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “Canadian English”, then press the ENTER button. 4. Press the ▲ or ▼ button to select a appropriate restriction. Press the ENTER button to activate the restriction selected. The “ ” symbol is indicated. Press the EXIT button to exit. Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings. • C: Programming intended for children under age 8. • C8+: Programming generally considered acceptable for children 8 years and over to watch on their own. • G: General programming, suitable for all audiences. • PG: Parental Guidance. • 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14. • 18+: Adult programming. The V-Chip will automatically block any category that is “more restrictive”. For example, if you block G category, then PG, 14+ and 18+ will automatically be blocked also. Move Enter Return V-Chip Lock : On ► TV Parental Guidelines ► MPAA Rating ► Canadian English ► Canadian French ► Downloadable U.S. Rating ► Change PIN ► V-Chip TV Move Enter Return Canadian English TV C C8+ G PG 14+ 18+ Block Allow All Block All Move Enter Return Canadian English TV C C8+ G PG 14+ 18+ Block Allow All Block All V-Chip Enter PIN TV * * * * Enter PIN Return Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return

How to Set up Restrictions Using the ‘Canadian French’ 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number. 3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “Canadian French”, then press the ENTER button. 4. Press the ▲ or ▼ button to select an appropriate restriction. Press the ENTER button to activate the restriction selected. The “ ” symbol is indicated. Press the EXIT button to exit. Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings. • G: General • 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. • 13 ans+: Programming may not be suitable for children under the age of 13. • 16 ans+: Programming is not suitable for children under the age of 16. • 18 ans+: Programming restricted to adults. The V-Chip will automatically block any category that is “more restrictive”. For example, if you block 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also. Move Enter Return V-Chip Lock : On ► TV Parental Guidelines ► MAPP Rating ► Canadian English ► Canadian French ► Downloadable U.S. Rating ► Change PIN ► V-Chip TV Move Enter Return Canadian French TV G 8 ans+ 13 ans+ 16 ans+ 18 ans+ Block Allow All Block All Move Enter Return Canadian French TV G 8 ans+ 13 ans+ 16 ans+ 18 ans+ Block Allow All Block All V-Chip Enter PIN TV * * * * Enter PIN Return Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number. 3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “Downloadable U.S. Rating”, then press the ENTER button. If information is not downloaded from the broadcasting station, the Downloadable U.S. rating menu is deactivated. Parental restriction information is automatically downloaded while watching DTV channels. It may take several seconds. The Downloadable U.S. rating menu is available for use after information is downloaded from the broadcasting station. However, depending on the infor mation from the broadcasting station, it may not be available for use. 4. Press the ▲ or ▼ button to select a appropriate restriction. Press the ENTER button to activate the restriction selected. The “ ” symbol is indicated. Press the EXIT button to exit. Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings. Parental restriction levels differ depending on the broadcasting station. The default menu name and Downloadable US rating changes depending on the downloaded information. Even if you set the On-screen display to your desired language, the "Downloadable U.S. Rating" menu will appear in English only. The rating will automatically block certain categories that are more restrictive. The rating titles(For example: Humor Level..etc) and TV ratings(For example: DH,MH,H..etc) may differ depending on the broadcasting station. Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. Move Enter Return Downloadable U.S. Rating TV DH MH H VH EH Humor Level Allow All Block All 41/2 Rating title The number of current rating title The number of all rating title V-Chip Enter PIN TV * * * * Enter PIN Return Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► V-Chip ► Caption ► Menu TransParency : High ► ▼More TV Move Enter Return Move Enter Return V-Chip Lock : On ► TV Parental Guidelines ► MPAA Rating ► Canadian English ► Canadian French ► Downloadable U.S. Rating ► Change PIN ► V-Chip TV 1. Enter your PIN. To resume normal viewing, tune to a different channel using CH or CH button. Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, use the V-Chip function for an “emergency escape”: 2. Press the MENU button. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 3. Press the ▲ or ▼ button to select "V-Chip", then press the ENTER button. 4. Enter your PIN, then press the ENTER button and press the ▲ or ▼ button to temporarily disable the V-Chip Lock. If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off. → MUTE → 8 → 2 → 4 → Power On. How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: Channel Is Locked by TV-PG [ S ] Use the NUMBER buttons to enter your pin number to unlock all channels. Press EXIT to clear PIN. Press MENU for main menu. Channel Is Locked by TV-PG [ L ] Use the NUMBER buttons to enter your pin number to unlock all channels. Press EXIT to clear PIN. Press MENU for main menu.

1. Insert a USB drive containing the firmware upgrade into the WISELINK port on the side of the TV. 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 3. Press the ▲ or ▼ button to select Software upgrade, then press the ENTER button. 4. Press the ENTER button. The message "Scanning for USB... It may take up to 30 seconds." is displayed. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will shut off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. Upgrading the Software Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on located on the side of your TV. SW Upgrade Scanning for USB... It may take up to 30 seconds. Setup ▲ More Film Mode : Off ► Wall-Mount Adjustment ► PIP ► Function Help : Off ► SW Upgrade ► TV Move Enter Return TV Side Panel USB Drive

WISELINK Using the WISELINK Function This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class (MSC) device. Press the POWER button on the remote control or front panel. Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack (USB jack) on the side of the TV. Using the Remote Control Button in WISELINK Menu Button Operations Move the cursor and select an item Select the currently selected item. Play or pause the Slide Show or MP3 file. Return to the previous menu Run various functions from the Photo and Music menus. Stop the current slide show or MP3 file. Page Up or Down (file list item) Stop the current function and return to the previous high-level menu. If you enter the WISELINK mode with no USB device connected. the message “There is no device connected” will appear. In this case, insert the USB device, exit the screen by pressing the WISE LINK button on the remote control and enter the WISELINK screen again. Photo and audio files must be named in English, French, or Spanish. If not, the files can not be played. Change the file names to English, French,or Spanish if necessary. The file system only supports FAT16/32 (The NTFS file system is not supported) Certain types of USB devices may not be compatible with this TV. Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.) Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. Recommended image resolution for Wiselink is 600 mega pixels. Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB Compatibility problem. Only MP3 and JPEG file formats are supported. We recommend the sequential jpeg format. Progressive jpeg uses a lot of memory and decoding may fail. Do not disconnect the USB device while it is “loading.” Neither PTP (Picture Transfer Protocol) nor MTP (Media Transfer Pprotocol) is supported. The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of the file The higher the resolution of the image, the longer it takes to display on the screen. If the horizontal resolution of an image is higher than 5000, it cannot be decoded. If the vertical resolution of an image is higher than 4000, it cannot be decoded. TV Side Panel USB Drive

1. Press the MENU button. Press the ▲ or ▼ button to select “Input”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER button. 3. Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press the ENTER button. The WISELINK menu differs depending on the USB Memory Device connected to TV. 4. Press the ◄ or ► button to move to an icon, then press the ENTER button. To exit WISELINK mode, press the WISELINK button on the remote control. Press the WISELINK button on the remote control to display a WISELINK menu. Using the WISELINK Menu Input Source List : TV ► Edit Name ► WISELINK Anynet+ (HDMI-CEC) TV Move Enter Return XTICK 861MB/994MB Free Move Enter Return Move Enter Exit Generio STORAGE DEVICE STORAGE DEVICE STORAGE DEVICE STORAGE DEVICE

1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. 3. Press the ▲, ▼, ◄ and ► buttons to select a file, then press the ENTER button. • Pressing the ENTER button over a photo icon shows the currently selected photo in full screen. • Pressing the ENTER button over a folder icon shows the JPEG files included in the folder. To exit WISELINK mode, press the WISELINK button on the remote control. Moving to a photo may take a few seconds to load the file. At this point, the icon will appear at the top left of the screen. This menu only shows files whose file extension is jpg. Files of other formats such as bmp or tiff will not be displayed. The files are displayed on a page. 15 thumbnail photos are displayed per page. The thumbnails are numbered from left to right and from top to bottom, from 1 to 15. Certain types of USB Digital camera and audio devices may not be compatible with this TV. Folders are displayed first and they are followed by all JPEG files in the current folder. The folders and JPEG files are sorted in alphabetical order. If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen. It takes time to show JPEG files as Thumbnail images. Using the PHOTO (JPEG) List This menu shows JPEG files and folders saved on an USB memory device. : Folder icon : Photo icon : Move to the previous folder stage icon Select INFO Photo Move View Return Up Folder Forder1 Photo 0001 Photo 0001 None File 4 File 5 File 6 File 7 File 8 File 9 File 10 File 11 File 12 File 13 Move Enter Return XTICK 861MB/994MB Free

Selecting a Photo and Slide Show 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. 3. Press the INFO button to display “Start Slide Show” or “Deselect All”. 4. Press the ▲ or ▼ button to select “Start Slide Show”, then press the ENTER button. During the slide show, files are displayed in order from the currently shown file. MP3 files can be automatically played during the Slide Show if the Default Background Music is set to On. To enable this function, MP3 files and other photo files must be located in the same folder on the USB Memory Device. 5. Press the INFO button during the slide show to set the following options (Slide show Speed, Background Music, Background Music Setting, List). Press the ▲ or ▼ button to select the option, then press the ENTER button. • After setting the option press the ENTER button to make a change. Move Enter Return XTICK 861MB/994MB Free Up Folder Forder1 Photo 0001 Photo 0001 None File 4 File 5 File 6 File 7 File 8 File 9 File 10 File 11 File 12 File 13 INFO Exit Start Slide Show Deselect All INFO Exit Slide show Speed Background Music Background Music Setting List

Using the Menu during a Slide Show Slide Show Speed: Select to control the slide show speed. You can select Slow, Normal, or Fast. Background Music: Select to choose whether you want to play an MP3 file during a slide show. You can select Music "ON" or "OFF". Background Music Setting: While the slide show is in progress, MP3 files and folders under the same directory are displayed. Select a folder using the ▲ or ▼ button and press the ENTER button. The selected folder will be highlighted. Press the RETURN button again to return to the slide show screen. The selected background music is played. If you turn Off the Background Music, even if the Background Music Settings have been set up, the background music will not be played. List: The file information is displayed as a folder or JPEG file. To exit WISELINK mode, press the WISELINK button on the remote control. OFF Fast Select INFO Photo Move View Return Up Folder Forder1 Photo 0001 Photo 0001 None File 4 File 5 File 6 File 7 File 8 File 9 File 10 File 11 File 12 File 13 Move Open Return ◄◄ 1/1/Page ►► Background Music Setting Choose files for background music

Slideshow function information icon (Displayed at the top left of the screen). Icon Current OSD Function (Photo) SlideShow Photo SlideShow is in progress. Photo Pause You are able to pause a SlideShow and Music by pressing the PLAY/PAUSE button on the remote control during a SlideShow. To resume the SlideShow, press the PLAY/PAUSE button on the remote control again. Move to Next Photo Pressing the (right) direction button on the remote control allows you to move to the next photo. Move to Previous Photo Pressing the (left) direction button on the remote control allows you to move to the previous photo When selecting a photo file, the photo file information is displayed on the left side of the TV screen, such as the resolution, the date modified and the order of the file in the current directory (e.g. 10th out of 15). Photo 108 x 81 Dec20. 2006 4/25 Such as the resolution Order of the file in the current directory Date modified Select INFO Photo Move View Return Up Folder Forder1 Photo 0001 Photo 0001 None File 4 File 5 File 6 File 7 File 8 File 9 File 10 File 11 File 12 File 13 Play Pause

Rotating 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. 3. Press the ▲, ▼, ◄ and ► button to select a file, then press the ENTER button. Pressing the button over a photo thumbnail displays the photo in full screen. 4. Press the INFO button to display the option(Start Slide Show, Rotate, Zoom, List). Press the ▲ or ▼ button to select “Rotate”, then press the ENTER button. • The INFO button, the Rotate option and Enter must be pressed each time you want to rotate the picture. For example, from 90 to 180 degrees. To rotate a photo, press the INFO button to open the options window, select the “Rotate” option and press the ENTER button. Whenever you do this, the photo on the screen is rotated. (90°, 180°, 270°, 0°) To exit WISELINK mode, press the WISELINK button on the remote control. The rotated file is not saved. The Zoom/Start Slide Show option is disabled when the Rotate option is selected. The Rotating function information icon (Displayed at the top left of the screen). Icon Current OSD Function Rotating (90°) This rotates a photo by 90 degrees Rotating (180°) This rotates a photo by 180 degrees Rotating (270°) This rotates a photo by 270 degrees Rotating (0°) This rotates a photo to its original position Move Enter Return XTICK 861MB/994MB Free INFO Exit Start Slide Show Rotate Zoom List Select INFO Photo Move View Return Up Folder Forder1 Photo 0001 Photo 0001 None File 4 File 5 File 6 File 7 File 8 File 9 File 10 File 11 File 12 File 13

Zooming-in 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. 3. Press the ▲, ▼, ◄ and ► buttons to select a file, then press the ENTER button. Pressing the button over a photo thumbnail displays the photo in full screen. 4. Press the INFO button to display the option(Start Slide Show, Rotate, Zoom, List). Press the ▲ or ▼ button to select “Zoom”, then press the ENTER button. The enlarged photo image appears on the screen. To enlarge a displayed photo, press the INFO button to open the Options window, select the “Zoom” option and press the ENTER button. Whenever you do this, the following zoom options are applied in sequence. • The INFO button, the Rotate option and Enter must be pressed each time you want to Zoom the picture. For example, from x 2 to x 4. • Zoom(x 2): Zoom-in to the photo x2. • Zoom(x 4): Zoom-in to the photo x4. • Zoom(x 1): Restore the photo to its original size. To pan up/down/left/right, press the ▲, ▼, ◄ and ► buttons. Images with a resolution larger than 1280 X 720 are not supported. To exit WISELINK mode, press the WISELINK button on the remote control. Move Enter Return XTICK 861MB/994MB Free INFO Exit Start Slide Show Rotate Zoom List Select INFO Photo Move View Return Up Folder Forder1 Photo 0001 Photo 0001 None File 4 File 5 File 6 File 7 File 8 File 9 File 10 File 11 File 12 File 13 x 1

Zoom function information icon (Displayed at the top left of the screen). Icon Current OSD Function Zoom (x 2) Zoom-in to a photo x2. Zoom (x 4) Zoom-in to a photo x4. Zoom (x 1) Restore a photo to its original size. Pan Down Pan down to view the lower part of a zoomed-in photo. Pan Up Pan up to view the upper part of a zoomed-in photo. Pan Right Pan right to view the right side of a zoomed-in photo. Pan Left Pan left to view the left side of a zoomed-in photo. Pan Down (END) Pan to the bottom of a zoomed-in photo. Pan Up (END) Pan to the top of a zoomed-in photo. Pan Right (END) Pan to the right-most part of a zoomed-in photo. Pan Left (END) Pan to the left-most part of a zoomed-in photo. The Rotate/Start Slide Show option is disabled when the Zoom option is selected. x 1 x 4 x 2

Using the MP3 List This menu shows MP3 files from among the files saved on a USB memory device. Move Enter Return : Folder icon : Music note icon : Move to the previous folder stage icon 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Music”, then press the ENTER button. The saved file information is displayed as a folder or file. 3. Press the ▲ or ▼ button to select a file, then press the ENTER button. To select all files or a file, press the INFO button to display the Music menus. Press the ENTER button to select “Play”, “Repeat Music”, or “Deselect All”. • Pressing the ENTER button over a musical note icon immediately plays the music file. • Pressing the ENTER button over a folder icon shows the music files included in the folder. To select a file on the next page, press the REW ◄◄ or FF ►► button to move to the next page. 4. Press the PLAY/PAUSE button while playing an MP3 file to pause the file. Press the STOP ▄ button to exit Play mode. To exit WISELINK mode, press the WISELINK button on the remote control. This menu only shows files with the MP3 file extension. Files with other file extensions are not displayed,even if they are saved on the same USB device. The selected file is displayed on the top with its playing time. To adjust the music volume, press the VOL+ or VOL- button on the remote control. To mute the sound, press the MUTE button on the remote control. FF ►► or REW ◄◄ button does not function during the play. Music function information icon (Displayed at the top left of the screen). Icon Current OSD Function (Music) One When a music file is being played. (Music) Play/Pause When pressing the PLAY/PAUSE button on the remote control while music is playing. The music stops and the ‘Play’ text appears at the top of the screen. (Music) Stop When pressing the STOP ▄ button on the remote control when music is stopped. The music resumes and the ‘Stop’ text appears at the top of the screen. Upper Folder 00:04:01 00:04:28 00:04:12 00:05:39 00:04:30 00:04:30 00:03:54 00:05:25 Folder 1 001 Swan Song feat.TBNY 002 Beatles-Yesterday 003 Fall in Love 004 Tom Waits-Time 005 Chuk Mangione-Feel So good 007 Ryuichi Sakamoto-Rain 008 Bon jovi-This ain’t a love song 006 Nat King Cole-Fly me to the moon Nat King Cole-Fly me to the moon 00:04:00 Exit Exit Play Repeat Music Deselect All Exit INFO

Repeat Music 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Music”, then press the ENTER button. The saved file information is displayed as a folder or file. 3. Press the ▲ or ▼ button to select a file, then press the ENTER button. Press the INFO button to display the Music menus. Press the ENTER button to select “Play”, “Repeat Music” or “Deselect All”. 4. Press the ENTER button to select “Repeat Music”. Select to repeatedly play MP3 files in the current folder. You can select On or Off • On: Plays back a music file or all music files repeatedly • Off: Doesn’t play back the music files repeatedly. To exit WISELINK mode, press the WISELINK button on the remote control. Upper Folder 00:04:01 00:04:28 00:04:12 00:05:39 00:04:30 00:04:30 00:03:54 00:05:25 Folder 1 001 Swan Song feat.TBNY 002 Beatles-Yesterday 003 Fall in Love 004 Tom Waits-Time 005 Chuk Mangione-Feel So good 007 Ryuichi Sakamoto-Rain 008 Bon jovi-This ain’t a love song 006 Nat King Cole-Fly me to the moon Nat King Cole-Fly me to the moon 00:04:00 Exit Play Repeat Music Deselect All Exit INFO Move Enter Return XTICK 861MB/994MB Free Upper Folder 00:04:01 00:04:28 00:04:12 00:05:39 00:04:30 00:04:30 00:03:54 00:05:25 Folder 1 001 Swan Song feat.TBNY 002 Beatles-Yesterday 003 Fall in Love 004 Tom Waits-Time 005 Chuk Mangione-Feel So good 007 Ryuichi Sakamoto-Rain 008 Bon jovi-This ain’t a love song 006 Nat King Cole-Fly me to the moon Nat King Cole-Fly me to the moon 00:04:00 Exit Play Repeat Music Deselect All Exit INFO On

1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Setup”, then press the ENTER button. 3. Press the ▲ or ▼ button to select an item you want, then press the ENTER button. 4. Press the ▲ or ▼ button to select the option, then press the ENTER button. continued... Using the Setup Menu Setup displays the user settings of the WISELINK menu. Move Enter Return Slide Show Speed : Fast Background Music : Off Background Music Setting On Repeat Music : On Screen Saver : 5 min Slow Normal Fast Move Enter Return Slide Show Speed : Fast Background Music : Off Background Music Setting Repeat Music : On Screen Saver : 5 min Move Enter Return

Slide Show Speed: Select to control the slide show speed. You can select Slow, Normal or Fast. Background Music : Select to determine whether to play an MP3 file during a slide show. You can select Music On or Music Off. Background Music Setting: You can select the background music to play during a slide show. You can also select the background music while a slide show is playing by pressing the INFO button and selecting the “Background Music Setting” menu. Repeat Music: Select to repeatedly play MP3 files in the current folder. You can select "On" or "Off". On: (Music) All, (Music) One Off: (Music) All, (Music) One Screen Saver: Select to set the waiting time before the screen saver appears. The screensaver will appear when no button is pressed for 1, 3 or 5 minutes. To exit WISELINK mode, press the WISELINK button on the remote control. Move Enter Return Slide Show Speed : Fast Background Music : Off Background Music Setting Repeat Music : On Screen Saver : Off Fast Normal Slow Move Enter Return Slide Show Speed : Fast Background Music : Off Background Music Setting Repeat Music : On Screen Saver : Off On Off Slide Show Speed : Fast Background Music : Off Background Music Setting Repeat Music : On Screen Saver : Off Move Enter Return On Off Slide Show Speed : Fast Background Music : Off Background Music Setting Repeat Music : On Screen Saver : Off Move Enter Return Move Enter Return Move Enter Return 1 min. 3 min. 5 min. Folder 01 Folder 02 Folder 03 Folder 04 Folder 05 Folder 06 Select Move Enter Return ◄◄ 1/1/Page ►► Background Music Setting Choose file for background music

What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. Connecting Anynet+ Devices The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to a TV Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. To connect to Home Theater 1. Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. 2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. Connect the Optical cable between the Digital Audio Out (Optical) jack on your TV and the Digital Audio Input on the Home Theater. Connect only one Home Theater. When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theater's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theater, not the TV. Please see the home theater's user manual for more information. Some HDMI cables may not support Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status. Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. About Anynet+ TV Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3 HDMI 1.3 Cable HDMI 1.3 Cable HDMI 1.3 Cable TV Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3 HDMI 1.3 Cable HDMI 1.3 Cable HDMI 1.3 Cable Optical Cable Home Theater HDMI 1.3 Cable

Setting Up Anynet+ The following settings help set the Anynet+ functions. To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On 1. Press the Anynet+ button. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ENTER button to select "Anynet+ (HDMI-CEC)", then press the ENTER button. 3, Press the ▲ or ▼ button to select "On", then press the ENTER button. The Anynet+ (HDMI-CEC) function is enabled. If you select Off, Anynet+ (HDMI-CEC) is disabled. When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off 2. Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button. 3. Press the ▲ or ▼ button to select "On", then press the ENTER button. The "Auto Turn Off" function is enabled. If you select "Off", the "Auto Turn Off" function is canceled. Press the EXIT button to exit. The active source on the TV remote must be set to TV to use the Anynet+ function. If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off. Scanning and Switching between Anynet+ Devices 1. Press the Anynet+ button. Anynet+ devices connected to the TV are listed. 2. Press the ▲ or ▼ button to select to a particular device and press the ENTER button. It is switched to the selected device. 3. If you cannot find a device you want, press the ▲ or ▼ button to select "Searching Connections", then press the ENTER button. The meassage "Configuring Anynet+ connection..." is displayed. When searching devices completes, the connected devices are listed in the Anynet+ menu. Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. The time required to scan for devices is determined by the number of connected devices. When the device scan is complete, the number of devices found are not displayed. Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices. If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Anynet+ button. Enter Return Move Enter Move Recevier: On Connect Recorder Setup Air 28 Exit Enter Return Move Enter Exit Move Recevier: On Connect Recorder Setup Air 28 Setup Anynet+ (HDMI-CEC) : On ► Auto Turn Off : On ► Searching Connections ► Enter Return Move Anynet+ Setup Anynet+ (HDMI-CEC) : Off Auto Turn Off : Off Searching Connections Off On Anynet+ Setup Anynet+ (HDMI-CEC) : On Auto Turn Off : Off Searching Connections Off On

Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Switches from Anynet+ to TV broadcast mode. Record Starts a recording. (This menu works only for a device supporting recording.) (Device_Name) Menu Shows the menu of the connected device. Example: When a DVD Recorder is connected, the DVD Recorder’s title menu appears. (Device_Name) Operation Shows the play control menu of the connected device. Example: When a DVD Recorder is connected, the play control menu of the DVD Recorder appears. Connect (Device_Name) Your TV connects to the corresponding device. Receiver Sound is output through the receiver (home theater). Setup You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for using Anynet+. TV Remote Control Buttons Available in Anynet+ Mode Device Type Operating Status Available Buttons Anynet+ Device After switching to the device, when the menu of the corresponding device is displayed on the screen. Numeric buttons ▲/▼/◄/►/ENTER buttons Color buttons EXIT button After switching to the device, while playing a file ◄◄ (Backward search) ►►(Forward search) (Stop) ►  (Play/Pause) Device with built-in Tuner After switching to the device, when you are watching a TV program CH ▲/▼ button Audio Device When Receiver is activated VOL +/- button MUTE button The Anynet+ function only works when the active source on the TV remote control is set to TV. The REC button works only while in the recordable state. You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the TV remote control. The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device. The Anynet+ functions do not operate with other manufacturers’ products. The ◄◄, ►► operations may differ depending on the device. Recording You can make a recording of a TV program using a recorder. Press the REC button. Recording begins. (Only when the Anynet+ enabled recording device is connected.) You can record the source streams by selecting "Record" after pressing the Anynet+ button. Pressing the REC button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded. Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording devices users manual.

Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. 1. Press the Anynet+ button. Press the ▲ or ▼ button to select "Receiver", then press the ENTER button. 2. Press the ◄ or ► button to select to "On", then press the ENTER button. Now you can listen to sound through the receiver. 3. Press the EXIT button to exit. When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of the TV. When using the WISELINK feature, sound may not output properly through the receiver. When listening through the receiver, there are restrictions for using the PIP and audio-related(MTS, Preferred language) menus. Troubleshooting for Anynet+ Symptom Solution Anynet+ does not work. ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ■ Connect only one receiver (home theater). ■ Check if the Anynet+ device power cord is properly connected. ■ Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. ■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ■ Check whether the TV remote control is in TV mode. ■ Check whether it is Anynet+ exclusive remote control. ■ Anynet+ doesn’t work at a certain condition. (Searching channels, Operating WISELINK) ■ When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or restart your TV. ■ Check if the Anynet+ Function of Anynet+ device is set on. I want to start Anynet+. ■ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. ■ Press the TV button on the TV remote control to switch to TV. Then press the Anynet+ button to show the Anynet+ menu and select a menu you want. I want to exit Anynet+. ■ Select View TV in Anynet+ menu. ■  Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. ■ Press any of CH, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) The message Connecting to Anynet+ device... appears on the screen. ■ You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. ■ Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. You cannot use the play function when Plug & Play is in progress. The connected device is not displayed. ■ Check whether or not the device supports Anynet+ functions. ■ Check whether or not the HDMI 1.3 cable is properly connected. ■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ■ Search Anynet+ devices again. ■ You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not support Anynet+ functions. The TV program cannot be recorded. Check whether the antenna jack on the recording device is properly connected. The TV sound is not output through the receiver. Connect the optical cable between TV and the receiver. Enter Exit Move Recevier: On Connect Recorder Setup Air 28

Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor picture Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality. Try another channel. Adjust the antenna. No picture or sound. Try another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections. No sound or sound is too low at maximum volume. First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly. Picture rolls vertically. Check all wire connections. The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again. The TV won’t turn on. Make sure the wall outlet is working. Remote control malfunctions Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check the battery terminals. “Check signal cable” message. Ensure that the signal cable is firmly connected to the PC source. “Not Supported Mode” message. Check the maximum resolution and the frequency of the Video Adapter. Compare these values with the data in the Display Modes. Digital broadcasting screen problem. Please check the digital signal strength and input antenna. The image is too light or too dark. Adjust the Brightness and Contrast. Adjust the Fine tuning. Black bars on the screen. Make sure the broadcast you’re receiving is High Definition (HD). HD channels sometimes broadcast Standard Definition (SD) programming, which can cause black bars. Set your cable/satellite box to stretch or widescreen mode to eliminate the bars. Picture has a Red/Green or Pink tint. Make sure the Component cables are connected to the correct jacks. Closed Captioning not working. If you are using a Cable/Satellite box, you must set Closed Captioning on the box, not your TV. Snowy picture Your cable box may need a firmware upgrade. Please contact your Cable company. Ghosting on picture This is sometimes caused by compatibility issues with your cable box. Try connecting Component cables instead. Appendix

Problem Possible Solution Horizontal bars appear to flicker, jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning. Vertical bars appear to flicker, jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning. Screen is black and power indicator light blinks steadily. On your computer check: Power, Signal Cable. The TV is using its power management system. Move the computer's mouse or press any key on the keyboard. Image is not stable and may appear to vibrate when you have a computer connected to the PC input. If the setting is not correct, use your computer utility program to change the display settings. Your TV supports multiscan display functions within the following frequency domain: Horizontal frequency (kHz) 30~60 Vertical frequency (Hz) 60~75 PC Maximum refresh rate (at 60 Hz) 1920 X 1080 Image is not centered on the screen. Adjust the horizontal and vertical position. The screen position must be adjusted on the output source (i.e. STB) with a digital signal. The damaged picture appears in the corner of the screen. If Just Scan is selected in some external devices, the damaged picture may appear in the corner of the screen. This symptom is caused by external devices, not TV. The TFT LCD panel uses a panel consisting of sub pixels (6,220,800) which require sophisticated technology to produce. How- ever, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Installing the Stand Disconnecting the Stand < 2 > < 3 > < 4 > 1. Place the TV face down on a soft cloth or cushion on a table. 2. Remove four screws from the back of the TV. 3. Separate the stand from the TV. 4. Cover the bottom hole with a cap. < 2 > < 3 > 1. Place the TV face down on a soft cloth or cushion on a table. 2. Put the stand into the hole at the bottom of the TV. 3. Insert screw into the hole indicated and tighten.

Wall Mount Adjusment Position1 Adjust Center Exit INFO Position 1 2 3 Setup ▲ More Film Mode : Off ► Wall-Mount Adjustment ► PIP ► Function Help : Off ► SW Upgrade ► TV Move Enter Return Once the auto wall mount is installed, the position of your TV can be easily adjustable. Using the Remote Control Buttons For installation, refer to the Installation Manual provided with the wall mount. For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company. This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer Button Operations Wall-mount angle adjustment Tilt Up, Tilt Down, Move right, Move left Reset Moves to the initial installation position Remembering the position and moving to the remembered position 1. Select the Direction buttons of the remote control. 2. Press the red button (Select Position 1). 3. Adjust the set to a desired position following the wall mount owner's manual. 4. The position you adjusted last is memorized as Position 1. 5. By using the green button (Select Position 2) and the yellow button (Select Position 3), you can save positions according to the procedures above. 6. You can save 3 respective positions. To the red button (Select Position 1), green button (Select Position 2) and yellow button (Select Position 3). If you press a button after saving, the set automatically moves to that saved angle. 7. If you additionally move the set from a saved position, the last position is saved. Auto Wall-Mount Adjustment (Sold separately) Entering the menu 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press the ENTER button. 3. Adjust to the desired position using the ▲,▼,◄,► buttons. 4. Press the EXIT button to exit. If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears. When you turn the power off, your TV moves to the initial installation position. When you turn the power on, your TV moves to the last adjusted position. TV Rear Panel Auto Wall-Mount EX-LINK Cable (Not supplied) red button green button yellow button

Wall Mount Kit Specifications ( VESA ) Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Product Family inch VESA Spec. (A * B) Standard Screw Quantity LCD-TV 23~ 26 200 * 100 M4 4 32 ~ 40 200 * 200 M6 46 ~ 52 600 * 400 M8 57 700 * 400 (No VESA) 57 ~ 70 800 * 400 80 ~ 1400 * 800 PDP-TV 42 ~ 50 600 * 400 M8 4 55 ~ 70 800 * 400 63 No VESA 6 80 ~ 1400 * 800 4 We provided the standard dimensions for wall mount kits as shown in the table above. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. Our 57" and 63" models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model. Do not install your Wall Mount Kit while your TV is turned Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock

1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1) and turn it in the locking direction (Figure 2). 2. Connect the Kensington lock cable. 3. Fix the Kensington lock to a desk or a heavy stationary object. Using the Anti-Theft Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. Figure 2 Figure 1 Cable The location of the Kensington Lock may be different depending on its model.

Specifications Model Name LN-T466F Screen Size (Diagonal) 46 inch PC Resolution 1920 x 1080 @ 60 Hz Sound Output 10W X 2 Dimensions (WxDxH) Body With stand 44.4 x 4.2 x 28.8 inches (1129 x 106 x 732 mm) 44.4 x 12.6 x 31.0 inches (1129 x 320 x 788 mm) Weight With Stand Without stand 78.3 Ibs (35.5 kg) 66.1 Ibs (30.0 kg) Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing Stand Swivel (Left / Right) -20˚ ~ 20˚ Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus. For the power supply and Power Consumption, refer to the label attached to the product.

Dimensions (LN-T466F) TOP VIEW JACK PANEL DETAIL 3.5"H X 9"W FRONT VIEW / SIDE VIEW REAR VIEW NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2007 Samsung Electronics America, Inc.

Contenido Español Información General Listado de características................................................................2 Accesorios.......................................................................................2 Aspecto general del panel de control...............................................3 Aspecto general del panel de conexiones.......................................4 Mando a distancia............................................................................5 Instalación de las pilas en el mando a distancia..............................6 Conexiones Conexión de antenas de VHF y UHF...............................................6 Conexión de TV por cable................................................................7 Conexión de un reproductor de vídeo..............................................8 Conexión de una videocámara........................................................9 Conexión de un reproductor de DVD...............................................9 Conexión a un DVD/receptor de TV digital a través de un HDMI....................................................................................10 Conexión de un DVD o un Decodificador digital mediante DVI.................................................................................10 Conexión de un sistema de audio digital....................................... 11 Conexión de un amplificador/DVD para cine en casa................... 11 Conexión a un PC.......................................................................... 11 Funcionamiento Encendido o apagado del TV.........................................................12 Función Plug & Play.......................................................................12 Cambio de canales........................................................................13 Ajuste del volumen.........................................................................14 Visualización de la pantalla............................................................14 Visualización de los menús............................................................15 Memorización de los canales.........................................................15 Configuración del mando a distancia.............................................17 Códigos del mando a distancia......................................................19 Para seleccionar la fuente.............................................................22 Edición del Nombre de la Fuente de entrada................................22 Control de la Imagen Uso de los parámetros de imagen automáticos.............................23 Ajuste del Color del fondo..............................................................24 Activación de la configuración detallada........................................25 Cambio del tamaño de la pantalla.................................................28 Configuración de Color activo........................................................29 DNIe (Motor de imagen natural digital)..........................................29 Congelación de la imagen.............................................................30 Ajuste de la función Film Mode......................................................30 Configuración del Nivel de negro HDMI.........................................30 Visualización Imagen en imagen...................................................31 Control de Sonido Personalización del sonido............................................................33 Uso de los parámetros de sonido automáticos..............................33 Configuración del TruSurround XT (SRS TS XT)...........................34 Selección de una pista de sonido multicanal (MTS) - Digital.............................................................................................34 Selección de una pista de sonido multicanal (MTS) - Analógico ....................................................................................35 Control automático de volumen.....................................................35 Selección del silencio interno.........................................................36 Ajuste de la melodía de encendido/apagado.................................36 Escuchar el sonido de la sub imagen del PIP................................37 Reajuste de valores de sonido a los valores predefinidos de fábrica.......................................................................................37 Conexión de los auriculares...........................................................37 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Control de los Canales Selección de la antena...................................................................38 Supresión de los canales codificados digitales..............................38 Adición y supresión de canales.....................................................39 Para configurar los canales favoritos.............................................40 Manejo de la Lista de Canales.......................................................41 Visualización de la lista de canales...............................................41 Etiquetado de canales...................................................................42 LNA (Low Noise Amplifier - Amplificador de ruido bajo).................42 Sintonización fina de los canales analógicos.................................43 Comprobación de la potencia de la señal digital...........................43 Pantalla de PC Uso del TV como pantalla de ordenador (PC)...............................44 Modos de visualización..................................................................44 Ajuste del televisor con el ordenador.............................................45 Configuración del PC para Home Cinema.....................................46 Ajuste de la Hora Configuración del Reloj..................................................................47 Descripción de las Funciones Selección del idioma de menú.......................................................50 Ajuste del modo Pantalla Azul.......................................................51 Uso del Modo Juego......................................................................51 Visión de subtítulos (mensajes de texto en pantalla) - Analógico.....................................................................................52 Visión de subtítulos (mensajes de texto en pantalla) - Digital.............................................................................................53 Nivel Transparencia del menú.......................................................54 Uso de la función de ahorro de energía.........................................54 Ajuste de la función de ayuda........................................................55 Reducción digital del ruido.............................................................55 Uso de V-Chip................................................................................56 Guía de actualización del software................................................63 WISELINK Uso de la función WISELINK.........................................................64 Uso del menú WISELINK...............................................................65 Uso de la lista FOTO (JPEG).........................................................66 Uso de la lista MP3........................................................................73 Uso del menú de configuración.....................................................75 Acerca de Anynet+ ¿Qué es Anynet? ..........................................................................77 Conexión de dispositivos Anynet+.................................................77 Configuración de Anynet+..............................................................78 Búsqueda y cambio de dispositivos Anynet+.................................78 Grabación......................................................................................79 Escucha a través de un receptor...................................................80 Compruebe estos puntos antes de solicitar servicio técnico.........80 Apéndice Identificación de problemas...........................................................81 Instalación del soporte...................................................................83 Desconexión del soporte...............................................................83 Ajuste de montaje mural automático (se vende por separado).....84 Especificaciones del equipo de montaje en la pared (VESA)........85 Uso del cierre antirrobo kensington...............................................86 Especificaciones............................................................................87 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Antes de usar el equipo lea este manual para evitar fallas y guarde para futuras referencias. Español - 1 Símbolo Pulse Importante Nota Botón de una pulsación

Accesorios Información General Listado de características  Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor.  Temporizador automático para encender o apagar el televisor.  Temporizador de desconexión especial.  Función V-chip.  Excelente interfaz digital y capacidad de trabajo en red: El sintonizador digital HD incorporado permite ver las emisiones HD que no exigen una suscripción sin que sea necesario disponer de un receptor de televisión por cable/satélite (decodificador).  Conexión HDMI/DVI del PC con este televisor.  Mando a distancia Con el mando a distancia suministrado se puede controlar el televisor, la mayoría de los reproductores de DVD, los receptores de televisión por cable/satélite (decodificadores) y los aparatos de vídeo.  Calidad excelente de la imagen - La tecnología DNIe proporciona imágenes completamente reales.  SRS TruSurround XT - SRS TruSurround XT proporciona un sistema surround Dolby virtual. Compruebe que las opciones siguientes se incluyen con su TV LCD. Si falta alguna opción, póngase en contacto con el proveedor. Mando A Distancia y Pilas (AAA x 2) (BN59-00599A) Cable de alimentación (3903-000144) Paño de limpieza (BN63-01798A) Cubierta inferior (BN63-02624A) Manual de Instrucciones Tarjeta de garantía / Tarjetas de registro / Guía de seguridad (no esta disponible en todas las localidades) El color y la forma de los elementos puede variar según el modelo.

Aspecto general del panel de control 1 SOURCE Cambia entre todas las fuentes de entrada disponibles (TV, AV1, AV2, S-Video1, S-Video2, Componente1, Componente2, PC, HDMI1, HDMI2, HDMI3). En el menú de la pantalla, utilice este botón del mismo modo que el botón ENTER del mando a distancia. 2 MENU Pulse para ver en pantalla un menú con las características del TV. 3 + VOL - Pulse para aumentar o reducir el volumen. En el menú de la pantalla, utilice los botones + VOL - del mismo modo que los botones ◄ y ► del mando a distancia. 4 < CH > Pulse para cambiar de canal. En el menú de la pantalla, utilice estos botones < CH > del mismo modo que los botones ▲ y ▼ del mando a distancia. 5 Altavoces 6 (Encendido) Pulse para encender o apagar el TV. Indicador De Alimentación Parpadea y se apaga cuando se enciende el aparato y se ilumina en el modo en espera. 7 Sensor del mando a distancia Dirija el mando a distancia hacia este punto del TV. Botones de la parte inferior derecha del panel Los botones del panel inferior derecho controlan las funciones básicas del televisor, incluido el menú en pantalla. Para usar las funciones más avanzadas, debe usar el mando a distancia. El color y la forma del producto pueden variar según el modelo.

Aspecto general del panel de conexiones Conectores del panel posterior Se pueden usar para conectar componentes de A/V que estarán conectados permanentemente, como reproductores de vídeo o de DVD. Si precisa información sobre la conexión de equipos, consulte las páginas 6 a 11. 1 AUDIO OUT Permite conectar las tomas de la entrada de audio del amplificador/sistema de Home Cinema. 2 DIGITAL AUDIO OUT (OPTICAL) Se conecta al componente de audio digital. 3 PC IN Permite conectar a las tomas de salida de audio y de vídeo de su PC. 4 HDMI IN 1,2,3 / DVI IN(HDMI1) (AUDIO R/L) Permite conectar a la toma HDMI de un dispositivo que tenga salida HDMI. Use el terminal HDMI IN 1 para conectar el DVI a un dispositivo externo. Use un cable de DVI a HDMI o un adaptador de DVI-HDMI (DVI a HDMI) para la conexión del vídeo, y las tomas "R-AUDIO-L" de DVI IN (HDMI1) para el audio. - No se necesita ninguna conexión de sonido para una conexión de HDMI a HDMI. - Cuando se usa una conexión de cable HDMI/DVI, se debe conectar en el terminal HDMI IN 1. 5 ANT 1 IN/ANT 2 IN Permite conectar a una antena o un sistema de TV por cable. 6 EX-LINK Toma de conexión para un soporte de montaje mural opcional. Permite ajustar el ángulo de visualización del televisor mediante el mando a distancia. 7 COMPONENT IN 1,2 Permite conectar el vídeo/audio de componentes. 8 AV IN 1 / AV IN 2 Entradas de vídeo y audio para dispositivos externos, como una videocámara o un reproductor de vídeo. S-VIDEO Permite conectar la señal de S-Vídeo de una cámara o de un vídeo. 9 Botón de encendido Permite conectar el cable de alimentación suministrado. 0 Bloqueo Kensington El bloqueo Kensington (opcional) es un dispositivo que se utiliza para fijar físicamente el sistema cuando se utiliza en un sitio público. Si desea usar un dispositivo de bloqueo, póngase en contacto con el distribuidor donde adquirió el televisor. La ubicación del “Bloqueo Kensington” puede variar según el modelo. ! AURICULAR Permite conectar unos auriculares externos para audiciones privadas. @ WISELINK Se usa para conectar un dispositivo de almacenamiento masivo USB para ver archivos de fotos (JPEG) y reproducir archivos de audio (MP3). [Tomas del panel lateral]

Mando a distancia Puede utilizar el mando a una distancia de hasta 7 metros del televisor. Al usarlo, apunte directamente al televisor. También puede utilizar el mando a distancia para hacer funcionar el aparato de vídeo, el decodificador de cable, el reproductor de DVD o los receptores de televisión por cable/satélite (decodificadores). Es un mando a distancia especial para personas con discapacidades visuales; presenta puntos Braille en los botones POWER, de canales, de volumen, STOP y PLAY/PAUSE. El exceso de luz puede influir en el rendimiento del mando a distancia. 1 POWER Enciende o apaga el TV. 2 BOTONES NUMERICOS Pulsar para cambiar el canal.. 3 – Pulse este botón para seleccio- nar canales adicionales (digitales y analógicos) emitidos por la misma emisora. Por ejemplo, para eleccio- nar el canal “54-3” pulse “54”, “-” y “3”. 4 CH LIST Muestra el “Gestor canales” en la pantalla. 5 ANTENNA Pulse este botón para seleccionar “AIRE” o “CABLE”. 6 Funciones del vídeo/DVD - Rebobinar - Detener - Reproducir/Pausa - Avance rápido 7 VOL / VOL Pulse para aumentar o reducir el volumen. 8 (MUTE) Pulse para desactivar momentáneamente el sonido. 9 MENU Muestra el menú de pantalla principal. 0 S.MODE Selección del modo de sonido. ! RETURN Vuelve al menú anterior. @ P.MODE Selección de efectos de imagen. # CAPTION Controla el decodificador de subtítulos. $ FAV.CH Pulse este botón para sintonizar sus canales favoritos. % SLEEP Pulse este botón para seleccionar un intervalo prefijado para la desconexión automática. ^ SRS Selecciona el modo SRS TruSurround XT. & SET Permite configurar el mando a distancia para controlar el televisor, el aparato de vídeo, el reproductor de DVD y el receptor de televisión digital o de cable. * TV, DVD, STB, CABLE, VCR Púlselo para controlar el televisor, el reproductor de DVD, el receptor de televisión digital o de cable o el aparato de vídeo. (Consulte las páginas 17 a 21) ( Cuando se pulsa este botón, algunos botones del mando a distancia (como TV, DVD, STB, CABLE, VCR, VOL y CH) se iluminan durante unos segundos y se apagan para ahorrar energía. Esta función es útil cuando se usa el mando a distancia de noche o en una sala a oscuras. ) SOURCE Pulse para visualizar todos las fuentes de vídeo. a PRE-CH Sintoniza el canal anterior. b WISELINK Esta función permite ver y reproducir archivos de fotos (JPEG) y de audio (MP3) desde un dispositivo externo. (Consulte la página 66 (JPEG), 73 (MP3).) c REC Este botón se puede usar para controlar la grabación en los receptores de Samsung.(Consulte la página 79.) d CH / CH Permiten cambiar de canal. e EXIT Pulse el botón para salir. f ARRIBA▲ / ABAJO▼ / IZQUIERDA◄ / DERECHA► / ENTER Sirve para seleccionar los elementos del menú en pantalla y cambiar los valores del menú. g INFO Púlselo para mostrar información en la pantalla del televisor. h Anynet+ Ejecuta las funciones de visualización de Anynet+ y configura los dispositivos de Anynet+. i STILL Pulse para detener la acción durante una escena concreta. Para reanudar la reproducción normal, vuelva a pulsarlo. j P.SIZE Selección del tamaño de la imagen. k PIP Imagen sobre imagen Encendido/ Apagado. l CH / Presenta secuencialmente los canales disponibles. (Estos botones sólo cambian los canales de la ventana PIP). m MTS Pulse para elegir estéreo, mono o pro grama de audio independiente (emisión SAP). n RESET Cuando no funcione el mando a distancia, cambie las baterías y pulse el botón RESET (Reiniciar) durante 2 o 3 segundos antes de poder utilizarlo.

1. Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración. 2. Coloque dos pilas de tamaño AAA. Compruebe que los extremos “+” y “-” de las pilas concuerdan con el diagrama del interior del compartimiento. 3. Vuelva a colocar la tapa. Si no va a usar el mando a distancia durante un largo período de tiempo, extraiga las pilas y guárdelas en un lugar fresco y seco. El mando se puede utilizar hasta una distancia de unos 7 metros del televisor. (Con un uso normal del TV, las pilas duran alrededor de un año). Si el mando a distancia no funciona, haga estas comprobaciones: 1. ¿Está encendido el TV? 2. ¿Están invertidos los polos positivo y negativo de la batería? 3. ¿Se han agotado las baterías? 4. ¿Ha habido un corte de luz o el cable está desconectado? 5. ¿Hay cerca una luz fluorescente o un letrero de neón? Instalación de las pilas en el mando a distancia Conexión de antenas de VHF y UHF Si su antena tiene un conjunto de cables con este aspecto, consulte “Antenas de par de cables planos de 300 Ω” a continuación. Si la antena tiene un cable como el que se muestra en el diagrama de la derecha, consulte “Antenas con cables coaxiales de 75 ohmios”. Si dispone de dos antenas, consulte “Antenas de VHF y UHF independientes”. 1. Coloque los conductores del par de cables bajo los tornillos del adaptador de 300-75 Ω (no incluido). Utilice un destornillador para apretar los tornillos. 2. Conecte el adaptador en el terminal ANT 1 IN (AIR) en la parte posterior del televisor.. ANT 1 IN (AIR) Antenas de par de cables planos de 300 Ω Si utiliza una antena externa (de techo o de “orejas de conejo”) de par de cables planos de 300 Ω, siga las indicaciones siguientes. 1. Conecte el cable de la antena en el terminal ANT 1 IN (AIR) de la parte inferior del panel posterior. Antenas de cable coaxial de 75 Ω ANT 1 IN (AIR) Antenas de VHF y UHF independientes Si dispone de dos antenas independientes para el TV (una de VHF y otra de UHF), debe combinar ambas señales de la antena antes de conectarlas al TV. Este procedimiento precisa un adaptador-combinador especial (disponible en la mayoría de tiendas de electrónica). 1. Conecte ambos cables de antena al combinador. 2. Conecte el combinador en el terminal ANT 1 IN (AIR) de la parte inferior del panel posterior. UHF VHF ANT 1 IN (AIR) UHF VHF Conexiones

Una vez hecha esta conexión, coloque el conmutador A/B en la posición “A” para la visualización normal. Coloque el conmutador A/B en la posición “B” para ver los canales codificados. (Cuando sitúe el conmutador A/B en “B”, deberá sintonizar el TV al canal de salida del decodificador, que normalmente es el canal 3 o 4). Conexión a un decodificador que decodifica algunos canales Si su decodificador sólo decodifica algunos canales (como los canales de pago), siga las instrucciones siguientes. Necesitará un divisor de dos vías, un conmutador de RF (A/B) y cuatro largos de cable RF. Estas opciones se encuentran en la mayoría de tiendas de electrónica). 2. Conecte este cable al divisor de dos vías. 3. Conecte el cable RF entre un terminal OUTPUT(salida) del divisor y el terminal IN (entrada) del decodificador. 4. Conecte el cable RF entre el terminal ANT OUT del decodificador y el terminal B.IN del conmutador A/B. 1. Busque y desconecte el cable que está conectado al terminal ANT IN (entrada de antena) del decodificador. Este terminal puede estar indicado como “ANT IN”, “VHF IN” o “IN”. 5. Conecte otro cable RF entre el otro terminal OUT del divisor y el terminal A.IN del conmutador de RF (A/B). 6. Conecte el último cable RF entre el terminal OUT del conmutador RF (A/B) y el terminal ANT 2 IN (CABLE) en la parte posterior del televisor. Divisor Cable entrante Divisor Servicio de Cable Cable entrante Divisor Servicio de Cable RF (A/B) Conmutador Cable entrante ANT IN Divisor Servicio de Cable Cable entrante RF (A/B) Conmutador Divisor Servicio de Cable Cable entrante Antena del Televisor RF (A/B) Conmutador ANT 2 IN (CABLE) Conexión de TV por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. TV por cable sin decodificador 1. Conecte el cable de entrada en el terminal de la antena ANT 2 IN (CABLE) de la parte posterior del TV. Dado que el TV está preparado para la televisión por cable, no se necesita un decodificador para ver canales de cable no codificados. Conexión al decodificador que decodifica todos los canales 1. Busque el cable conectado al terminal ANT OUT del decodificador. Este terminal puede estar indicado como “ANT OUT”, “VHF OUT” o “OUT”. 2. Conecte el otro extremo del cable en el terminal ANT 2 IN (CABLE) de la parte posterior del TV. ANT OUT ANT IN ANT 2 IN (CABLE) ANT 2 IN (CABLE)

Conexión de un reproductor de vídeo Estas instrucciones presuponen que ya ha conectado el TV a una antena o sistema de TV por cable (siguiendo las instrucciones de las páginas 6 a 7). Si aún no ha conectado el TV a una antena o un sistema de cable, sáltese el paso 1. 1. Desconecte el cable o la antena de la parte posterior del TV. 2. Conecte el cable o la antena en el terminal ANT IN de la parte posterior del reproductor de vídeo. 3. Conecte el cable RF entre el terminal ANT OUT (salida de antena) del reproductor de vídeo y el terminal ANT 1 IN (AIR) o ANT 2 IN (CABLE) del televisor. 4. Conecte un cable de vídeo entre la toma VIDEO OUT del reproductor de vídeo y la toma AV IN 1 (o AV IN 2) [VIDEO] del televisor. 5. Conecte un juego de cables de audio entre los conectores AUDIO OUT del reproductor de VCR y los conectores AV IN 1 (o AV IN 2) [R-AUDIO-L] del TV. Si tiene un reproductor de vídeo “mono” (sin estéreo), use el conector Y (no suministrado) para conectar los conectores de entrada de audio izquierdo o derecho del TV. Si el vídeo es estéreo, tendrá que conectar dos cables. Siga las instrucciones de “Visualización de una cinta de vídeo o de cámara de vídeo” para ver sus cintas.  Cada reproductor de video tiene una configuración distinta en el panel posterior. Cuando conecte un reproductor de video, debe hacer coincidir los colores del terminal de conexión y del cable. Panel posterior del TV Cable RF (No incluido) 3 Panel posterior del VCR 2 Cable de vídeo (No incluido) 4 Cable de Audio (No incluido) 5 ANT 1 IN (AIR) Este televisor Samsung se puede conectar a una señal S-Video procedente de un reproductor de VCR. (Esta conexión ofrece mejor calidad de imagen con relación a un reproductor de VCR normal). 1. Para empezar, siga los pasos 1 a 3 del apartado anterior para conectar la antena o el sistema de cable al reproductor de VCR y al TV. 2. Conecte un cable de S-Vídeo entre la toma de salida de S-VIDEO del reproductor y la toma de entrada AV IN 1 [S-VIDEO] del televisor. 3. Conecte un juego de cables de audio entre los conectores AUDIO OUT del reproductor de VCR y los conectores AV IN 1 [R-AUDIO-L] del TV. Con el aparato de vídeo se puede incluir una conexión S-Vídeo. (En caso contrario, consulte en la tienda de electrónica.) Cada aparato de vídeo tiene una configuración diferente del panel posterior. Cuando conecte un aparato de vídeo, debe hacer coincidir los colores del terminal de conexión y del cable. Panel posterior del VCR Cable RF (No incluido) 1 Cable de Audio(No incluido) 3 Panel posterior del TV Cable de S-Video (No incluido) 2 ANT 2 IN (CABLE) Conexión de S-Vídeo Conexión de vídeo

Conexión de un reproductor de DVD o receptores de televisión por cable/satélite (decodificadores) Las tomas del panel posterior del televisor facilitan la conexión de un reproductor de DVD o un receptor de televisión por cable/ satélite (decodificador) al TV. 1. Conecte un cable de componentes entre las tomas COMPONENT IN (1 o 2) [Y, PB, PR] del televisor y las tomas COMPONENT [Y, PB, PR] del reproductor de DVD o receptor de televisión por cable/satélite (decodificador). 2. Conecte cables de audio entre las tomas COMPONENT IN (1 o 2) [R-AUDIO-L] del televisor y las tomas AUDIO OUT del reproductor de DVD o receptor de televisión por cable/satélite (decodificador). El vídeo Componente separa el vídeo en Y (Luminancia (brillo)), el Pb (azul) y el Pr (rojo) para realzar la calidad del video. Las conexiones de audio y de vídeo componente deben coincidir. Por ejemplo, si se conecta el cable de vídeo a COMPONENT IN, conecte también el cable de audio a la misma entrada. Cada reproductor de DVD o receptor de televisión por cable/satélite (decodificador) tiene una configuración diferente del panel posterior. Cuando conecte un reproductor de DVD o receptor de televisión por cable/satélite (decodificador), debe hacer coincidir los colores del terminal de conexión y del cable. Reproductor de DVD o receptor de televisión por cable/ satélite (decodificador) Panel posterior del TV Cable de Component (No incluido) 1 Cable de Audio (No incluido) 2 Conexión de una videocámara Las tomas del panel lateral del televisor facilitan la conexión de la videocámara. Permiten ver las cintas de la videocámara sin utilizar un aparato de vídeo. 1. Conecte un cable de vídeo (o Cable de S-Vídeo) entre las tomas AV IN 2 [VIDEO] (o S-VIDEO) del televisor y las tomas VIDEO OUT de la videocámara. 2. Conecte un cable de audio entre las tomas AV IN 2 [R-AUDIO-L] del televisor y las tomas AUDIO OUT (Salida de audio) de la videocámara. Videocámara TV(Tomas del panel lateral) Cable de Video (No incluido) 1 Cable de Audio (No incluido) 2 Cada videocamara tiene una configuración distinta en el panel posterior. Cuando conecte una videocamara, debe hacer coincidir los colores del terminal de conexión y del cable. Cable de S-Video (No incluido) 1 o