Samsung UN32C4000 Operation & User’s Manual

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model _____________Serial No. _____________

Product design and specifications may be changed without notice. Important Warranty Information Regarding Television Format Viewing ✎See the warranty card for more information on warranty terms. Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned- in images, are not covered by your Samsung limited warranty. • SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only. The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables. For the location of a SAMSUNG Authorized Service Center, please call toll-free: – In the United States : 1-800-SAMSUNG (1-800-726-7864) – In Canada : 1-800-SAMSUNG Still image warning Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause uneven wear of the screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations: • Avoid displaying the same TV channel for long periods. • Always try to display a full screen image. • Reducing brightness and contrast will help to avoid the appearance of after-images. • Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details. Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. ✎When using a stand or wall-mount, use parts provided by Samsung Electronics only.  If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling. ✎The appearance may differ depending on the product. Installation with a stand Installation with a wall-mount 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches

 Accessories .............................................................. 4  Install the Stand ........................................................ 5  Viewing the Control Panel ......................................... 6  Viewing the Remote Control ...................................... 7  Connecting to an Antenna ........................................ 8  Plug & Play (Initial Setup) ........................................... 8 Connections  Connecting to an AV Device ...................................... 9  Connecting to an Audio Device ............................... 11  Connecting to a PC ................................................ 12  Changing the Input Source ..................................... 13 Basic Features  How to Navigate Menus .......................................... 13  Channel Menu ........................................................ 14 Seeing Channels 14 Using Favorite Channels 14 Memorizing Channels 14 Editing Channels 15 Other Features 15  Picture Menu .......................................................... 16 Changing the Preset Picture Mode 16 Adjusting Picture Settings 16 Economical Solutions 16 Changing the Picture Options 17 Setting up the TV with Your PC 18  Sound Menu ........................................................... 19 Changing the Preset Sound Mode 19 Adjusting Sound Settings 19 Sound Settings 19  Setup Menu ............................................................ 20 Setting the Time 20 Using the Sleep Timer 21 Setting the On/Off Timer 21 Locking Programs 21 Other Features 23 Picture In Picture (PIP) 24  Support Menu ......................................................... 24  Media Play .............................................................. 26 Connecting a USB Device 26 Screen Display 27 Playing Multiple Files 30 Media Play - Additional Functions 30  Anynet+ .................................................................. 32 Setting Up Anynet+ 33 Switching between Anynet+ Devices 33 Recording 34 Listening through a Receiver 34 Troubleshooting for Anynet+ 35 Other Information  Assembling the Cables ........................................... 36  Installing the Wall Mount ......................................... 37  Anti-theft Kensington Lock ...................................... 38  Securing the TV to the Wall ..................................... 39  Troubleshooting ...................................................... 40 License 42  Specifications ......................................................... 43  Dimensions ............................................................. 44  Index ...................................................................... 45 Check the Symbol!  This function can be used by pressing the TOOLS button on the remote control. Note Indicates additional information. Step by Step Guide Check here for instructions on how to open the relevant submenu within the OSD (on screen display). TOOLS

 Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.  Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 26).  Self Diagnosis: You can check to make sure picture and sound operate normally (p. 24). Accessories ✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎The items' colors and shapes may vary depending on the models.  Remote Control (BN59-00996A) & Batteries (AAA x 2)  Owner’s Instructions  Warranty Card / Safety Guide / Quick Setup Guide  Cleaning Cloth (BN63-01798B)  Power Cord Holder-Wire Stand Cable Tie Holder-Wire (3EA) (BN61-05491A) (BN61-05596A) (BN61-05373A) Blanking Bracket TV-Holder & Screw (X1) Holder-Ring (4EA) (BN63-06542B) (BN96-10788B) (BN61-05280A) Power Cord Clamp (AA65-30023A) ✎For best cable connection to this product, be sure to use cables with a maximum thickness as below:  Maximum thickness - 0.55 inches (14mm) M4 X L8 M8 X L19

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA Install the Stand See separate guide for installing the stand. s s s s s Stand (1EA) Guide Stand (1EA) Screws (10EA) Follow the steps below to connect the TV to the stand. s s s s 1 s s 2 1. Connect the Guide Stand to the Stand using four screws (M4 X L12) as shown. 2. With your TV upright, connect the TV to the Stand as shown. 3. Fasten three screws (M4 X L8) at position , and then fasten three screws (M4 X L8) at position . ✎NOTE  Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.  Make sure that at least two persons lift and move the LED TV.  Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to one side. s s s s s Top view Rear Guide Stand Screws (M4 X L12) Stand (A) (B) 5EA (M4 X L12) 5EA (M4 X L8)

✎The product color and shape may vary depending on the model. Remote control sensor Aim the remote control towards this spot on the TV. SOURCE Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER button on the remote control. MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.  Adjusts the volume. In the OSD, use the  buttons as you would use the  and  buttons on the remote control.  Changes the channels. In the OSD, use the  buttons as you would use the  and  buttons on the remote control. Power Indicator Blinks and turns off when the power is on and lights up in standby mode.  (Power) Turns the TV on or off. Standby mode Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord. Remote control sensor Speakers Power Indicator

✎This is a special remote controlfor the visually impaired and has Braille points on the Power, Channel and Volume buttons. Installing batteries (Battery size: AAA) ✎NOTE  Use the remote control within 23 feet from the TV.  Bright light may affect the performance of the remote control. Avoid use when nearby fluorescent lights or neon signs.  The color and shape may vary depending on the model. CH LIST MUTE POWER PRE-CH HDMI MENU TOOLS RETURN MEDIA.P FAV.CH S.MODE P.MODE P.SIZE CC SLEEP A B C D MTS EXIT INFO SOURCE Turns the TV on and off. Returns to the previous channel. Cuts off the sound temporarily. Displays the channel list on the screen (p. 14). Changes channels. Displays and selects the available video sources (p. 13). Displays Favorite Channel Lists on the screen (p. 14). Displays information on the TV screen. Selects the on-screen menu items and changes the values seen on the menu. Exits the menu. S.MODE: Press to select the sound mode (p. 19). SLEEP: Automatically shuts off the TV at a preset time (p. 21). MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast) (p. 19). P.MODE: Press to select the picture mode (p. 16). P.SIZE: Selects the picture size (p. 17). CC: Controls the caption decoder (p. 23). Selects the HDMI mode directly. Press to directly access channels. Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”. Adjusts the volume. Brings up the OSD. Displays Media Play (USB) (p. 26). Quickly select frequently used functions. Returns to the previous menu. Buttons used in the Channel list, Media Play (USB) menu, etc. Use these buttons in Media Play (USB) and Anynet+ (HDMI-CEC) modes (p. 26, 32) (: Controls recording for Samsung recorders that have the Anynet+ feature)

When the TV is initially powered on, basic settings proceed automatically. ✎Connecting the power cord and antenna. ✎If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly. Plug & Play (Initial Setup) When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWER button. Plug & Play is available only when the Setup source is set to TV. ✎To return to the previous step, press the Red button. 1 Selecting a language Press the  or  button, then press the ENTER button. Select the desired OSD (On Screen Display) language. P POWER 2 Selecting Store Demo or Home Use Press the  or  button, then press the ENTER button.  Select the Home Use mode. Store Demo Mode is for retail environments.  To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec. 3 Selecting an antenna Press the  or  button, then press the ENTER button. Select Air, Cable or Auto. 4 Selecting a channel Press the  or  button, then press the ENTER button. Select the channel source to memorize. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel  Auto Program (p.15). ✎Press the ENTER button at any time to interrupt the memorization process. 5 Setting the Clock Mode Set the Clock Mode automatically or manually.  Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.  Manual: Allows you to manually set the current date and time (p. 20). 6 Viewing the HD Connection Guide. The connection method for the best HD screen quality is displayed. 7 Enjoy your TV Press the ENTER button. If You Want to Reset This Feature...  MENU  Setup  Plug & Play  ENTER ANT OUT VHF/UHF Antenna       Power Input or Cable

Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p) Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver ✎HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN  When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.  If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal color).  If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade.  It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur. W R HDMI OUT DVI OUT R AUDIO L AUDIO OUT Device Device         !         

Available devices: Digital Audio System, Amplifier, Home Theater ✎COMPONENT IN / AV IN: When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow). ✎To obtain the best picture quality, the Component connection is recomended over the A/V connection. ✎If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly. Using an EX-Link Cable Connection Available Devices: External devices that support EX-Link EX-LINK: Connector for service only. R G B W R W R R G B Y Y W R W AUDIO OUT R AUDIO L VIDEO OUT Y W R R G B W R AUDIO OUT R AUDIO L PR PB COMPONENT OUT        "  # $ %&  Device Device !      '          

Using an Optical (Digital) or Audio (Analog) Cable Connections Available devices: Digital Audio System, Amplifier, DVD home theater ✎DIGITAL AUDIO OUT (OPTICAL)  When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.  5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.  When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater. ✎AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.  When connecting, use the appropriate connector.  When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control. R AUDIO L AUDIO IN OPTICAL W R Amplifier / DVD home theater Digital Audio System         ( )    

Using an HDMI/DVI cable or a D-sub cable Display Modes (D-Sub and HDMI/DVI Input) Optimal resolution is 1360 x 768 @ 60 Hz. Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.322 +/- -/+ MAC 640 x 480 832 x 624 35.000 49.726 66.667 74.551 30.240 57.284 -/- -/- VESA CVT 720 x 576 1280 x 720 35.910 56.456 59.950 74.777 32.750 95.750 -/+ -/+ VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 720 1360 x 768 31.469 37.500 37.861 37.879 46.875 48.077 48.363 56.476 60.023 45.000 47.712 59.940 75.000 72.809 60.317 75.000 72.188 60.004 70.069 75.029 60.000 60.015 25.175 31.500 31.500 40.000 49.500 50.000 65.000 75.000 78.750 74.250 85.500 -/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ +/+ VESA GTF 1280 x 720 52.500 70.000 89.040 -/+ ✎NOTE  For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.  The interlace mode is not supported.  The set might operate abnormally if a non-standard video format is selected.  Separate and Composite modes are supported. SOG(Sync On Green) is not supported.  !     *          AUDIO OUT DVI OUT AUDIO OUT PC OUT

Source List Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.  MENU  Input  Source List  ENTER ■ TV / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB ✎You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted. ✎In the Source List, PC is always activated. Edit Name  MENU  Input  Edit Name  ENTER ■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. ✎When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set to DVI PC or DVI Devices mode under Edit Name. SOURCE Basic Features How to Navigate Menus Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions. TOOLS MEDIA P FAV.CH A B C D INFO 4 1 2 3 MENU RETURN EXIT  MENU button: Displays the main on-screen menu.  ENTER / Direction button: Move the cursor and select an item. Confirm the setting.  RETURN button: Returns to the previous menu.  EXIT button: Exits the on-screen menu. How to Operate the OSD (On Screen Display) The access step may differ depending on the selected menu. 1 MENU The main menu options appear on the screen: Picture, Sound, Channel, Setup, Input, Application, Support. 2  /  Select an icon with the  or  button. 3 ENTER  Press ENTER to access the sub-menu. 4  /  Select the desired submenu with the  or  button. 5  /  Adjust the value of an item with the  or  button. The adjustment in the OSD may differ depending on the selected menu. 6 ENTER  Press ENTER to confirm the selection. 7 EXIT Press EXIT.

the program guide for digital broadcasts.  MENU  Channel  Channel List  ENTER Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the  /  and ENTER buttons. Then you can watch the selected channel. ■ All Channels: Shows all currently available channels. ■ Added Channels: Shows all added channels. ■  Favorite: Shows all favorite channels. ■ Programmed: Shows all currently reserved programs. ✎Using the color buttons with the Channel List  Red (Antenna): Switches to Air or Cable.  B Green (Zoom): Enlarges or shrinks a channel number.  Yellow (Select): Selects multiple channel lists. Select desired channels and press the Yellow button to set all the selected channels at the same time. The mark appears to the left of the selected channels.   (Page): Move to next or previous page.   (Tools): Displays the Channel List option menu. (The options menus may differ depending on the situation.) Channel Status Display Icons Icons Operations A channel selected. A channel set as a Favorite.  A reserved Program.  Using Favorite Channels  MENU  Channel  Channel List  ENTER Add to Favorite / Delete from Favorite  Set channels you watch frequently as Favorites. 1. Select a channel and press the TOOLS button. 2. Add or delete a the channel using the Add to Favorite or Delete from Favorite menu respectively. To show all Favorite channels, click on the button shown on the rignt.  Memorizing Channels  MENU  Channel  ENTER Antenna (Air / Cable)  Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). FAV.CH 6 Air 6 1 * TV #6 7 Air 8 Air 9 Air 9 1 * TV #9 10 Air 10 1 * TV #10 11 1 * TV #11 &   B,'   ) -. /2    2 6 Air 6 1 * TV #6 7 Air 8 Air 9 Air 9 1 * TV #9 10 Air 10 1 * TV #10 11 1 * TV #11 &   B,'   ) -. /2    2   34& /' &! $.  ' 5   ) 

■ Cable: Cable antenna signal. ■ Auto: Air and Cable antenna. ✎NOTE  When selecting the Cable TV system: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.  After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.  Editing Channels  MENU  Channel  Channel List  ENTER Channel Name Edit 1. Select a channel and press the TOOLS button. 2. Edit the channel name using the Channel Name Edit menu. ■ Channel Name Edit (analog channels only): Assign your own channel name.  Other Features  MENU  Channel  ENTER Clear Scrambled Channel This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. How to Stop Searching Scrambled Channels 1. Press the ENTER button to select stop. 2. Press the  button to select Yes. 3. Press the ENTER button. ✎This function is only available in Cable mode. Channel List Channel List Option Menu Set each channel using the Channel List menu options (Add / Delete, Timer Viewing, Select All / Deselect All). Option menu items may differ depending on the channel status. 1. Select a channel and press the TOOLS button. 2. Select a function and change its settings. ■ Add / Delete: Delete or add a channel to display the channels you want. ✎NOTE  All deleted channels will be shown on the All Channels menu.  A gray-colored channel indicates the channel has been deleted.  The Add menu only appears for deleted channels.  Delete a channel from the Added Channels or Favorite menu in the same manner. ■ Timer Viewing: You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function. 1. Press the  /  /  /  buttons to select the desired channel in Channel List. 2. Press the TOOLS button, then select Timer Viewing. 3. Scroll up or down to adjust the settings in the box, or use the numeric buttons on your remote for entering the date and time. ✎If you selected Once, Every Week, or Every Day in Repeat, you can enter the date you want. 4. Select OK, then press the ENTER button when done. ✎NOTE  Only memorized channels can be reserved.  Reserved programs will be displayed in the Programmed menu.  When a digital channel is selected, press the  button to view the digital program. ■ Select All: Select all the channels in the channel list. ■ Deselect All: Deselect all the selected channels. ✎You can only select Deselect All when one or more channels are selected.

You can view, modify or delete a show you have reserved to watch. Programmed timer viewing is displayed here. Highlight a program and press the TOOLS button to display Options. ■ Change Info: Change a show you have reserved to watch. Begin with step 3 of “Timer Viewing,” above. ■ Cancel Schedules: Cancel a show you have reserved to watch. ✎This deletes the highlighted or selected program(s). ■ Information: Display a show you have reserved to watch. (You can also change the reservation Information.) ✎Alternatively, you can view Information by highlighting a program and pressing the ENTER button. ■ Select All / Deselect All: Select or deselect all reserved programs. Fine Tune (analog channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. ✎Settings are applied to the channel your currently watching. ✎Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. ✎To reset the fine-tuning, select Reset. Picture Menu  Changing the Preset Picture Mode  MENU  Picture  Mode  ENTER Mode Select your preferred picture type. ■ Dynamic: Suitable for a bright room. ■ Standard: Suitable for a normal environment. ■ Movie: Suitable for watching movies in a dark room.  Adjusting Picture Settings  MENU  Picture  ENTER Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) Your television has several setting options for picture quality control. ✎NOTE  When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.  In PC mode, you can only make changes to Backlight, Contrast and Brightness.  Settings can be adjusted and stored for each external device connected to the TV.  Lowering picture brightness reduces power consumption.  Economical Solutions Eco Solution  MENU  Picture  Eco Solution  ENTER ■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto): This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button to turn on the screen again. ■ No Signal Power Off (Off / 15 min / 30 min / 60 min) To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal. ✎Disabled when the PC is in power saving mode. P.MODE

Advanced Settings  MENU  Picture  Advanced Settings  ENTER (Advanced Settings are available Standard / Movie mode) Compared to previous models, new Samsung TVs have a more precise picture. ✎In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance. ■ Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. ■ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. ■ Shadow Detail (-2~+2): Increase the brightness of dark images. ■ Gamma: Adjust the primary color intensity. ■ RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation. ■ Color Space (Auto / Native / Custom): Adjust the range of colors available to create the image. To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom. ■ White Balance: Adjust the color temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each color's (red, green, blue) brightness. Reset: Resets the White Balance to it's default settings. ■ Flesh Tone: Emphasize pink “Flesh Tone.” ■ Edge Enhancement (Off / On): Emphasize object boundaries. Picture Options  MENU  Picture  Picture Options  ENTER ✎In PC mode, you can only make changes to the Color Tone, Size and Auto Protection Time. ■ Color Tone (Cool / Normal / Warm1 / Warm2) ✎Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. ✎Settings can be adjusted and stored for each external device connected to an input on the TV. ■ Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. 16:9: Sets the picture to 16:9 wide mode. Zoom: Use for moderate magnification. Zoom2: Use for a stronger magnification. Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen. ✎Available for HD 1080i / 720p signal in 16:9 mode. 4:3: Sets the picture to basic (4:3) mode. ✎Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention(screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.    ")7/ :(;;  <')  &2 : ' $  := %'' := %"(< :(;; &) : 4  ")  4 5 & &   &/ :&'  > :?@:F . 2 3 & :  -5%2 3 & :  ")7H 4  :&' 3' :(;;  -& ) /' :J&2 4 5 & &

1. Press the  button to select Position. 2. Press the ENTER button. 3. Press the  or  button to move the picture up or down. 4. Press the ENTER button. 5. Press the  button to select Reset. 6. Press the ENTER button to reset the picture to its default position.  After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture: 1. Press the  or  button to select Position. 2. Press the ENTER button. 3. Press the , ,  or  button to move the picture. 4. Press the ENTER button. 5. Press the  or  button to select Reset. 6. Press the ENTER button.  HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)  Settings can be adjusted and stored for each external device you have connected to an input on the TV. Input Source Picture Size ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3 DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) 16:9, 4:3, Wide Fit, Screen Fit PC 16:9, 4:3 ■ Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. ✎When the signal is weak, try other options until the best picture is displayed. Auto Visualization: When changing analog channels, displays signal strength. ✎Only available for analog channels. ✎When bar is green, is that the best possible signal. ■ MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality. ■ HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth. ✎Available only in HDMI mode. ■ Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality. ✎Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i). ■ Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off): Set the time the screen remains idle with a still image until the screen saver is activated. The Screen Saver prevents the formation of ghost images on the screen. Picture Reset (OK / Cancel) Resets your current picture mode to its default settings.  Setting up the TV with Your PC Set the input source to PC.  MENU  Picture  ENTER Auto Adjustment  Adjust frequency values/positions and fine tune the settings automatically. ✎Not available when connecting with an HDMI/DVI cable. Screen ■ Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine- tune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen. ■ Position: Adjust the PC’s screen positioning if it does not fit the TV screen. Press the  or  button to adjust the Vertical-Position. Press the  or  button to adjust the Horizontal-Position. ■ Image Reset: Resets the image to default settings.

Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on “Control Panel” on the Windows start menu. 2. Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear. 3. Click on “Display” and a display dialog box will appear. 4. Navigate to the “Settings” tab on the display dialog-box.  The correct size setting (resolution) [Optimum: 1360 x 768 pixels]  If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box. Sound Menu  Changing the Preset Sound Mode  MENU  Sound  Mode  ENTER Mode  ■ Standard: Selects the normal sound mode. ■ Music: Emphasizes music over voices. ■ Movie: Provides the best sound for movies. ■ Clear Voice: Emphasizes voices over other sounds. ■ Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.  Adjusting Sound Settings  MENU  Sound  Equalizer  ENTER Equalizer Adjusts the sound mode (standard sound mode only). ■ Balance L/R: Adjusts the balance between the right and left speaker. ■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. ■ Reset: Resets the equalizer to its default settings.  Sound Settings  MENU  Sound  ENTER Virtual Surround (Off / On) (standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology. Dialog Clarity (Off / On) (standard sound mode only) This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. Preferred Language (digital channels only) Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). ✎You can only select a language among the ones being broadcasted. Multi-Track Sound (MTS) (analog channels only) ■ Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal. ■ Stereo: Choose for channels that are broadcasting in stereo. ■ SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation. ✎Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.

To equalize the volume level on each channel, set to Normal. ■ Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. Speaker Select (External Speaker / TV Speaker) A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. ✎When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. ✎When Speaker Select is set to External Speaker.  TV Speaker: Off, External Speaker: On ✎When Speaker Select is set to TV Speaker.  TV Speaker: On, External Speaker: On ✎If there is no video signal, both speakers will be mute. SPDIF Output SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as an A/V Receiver/Home theater. ■ Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital. ■ Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms). Sound Reset (OK / Cancel) Reset all sound settings to the factory defaults. Setup Menu  Setting the Time  MENU  Setup  Time  ENTER Time ■ Clock: Setting the clock is for using various timer features of the TV.  The current time will appear every time you press the INFO button. ✎If you disconnect the power cord, you have to set the clock again. Clock Mode (Auto / Manual) – Auto: Set the current time automatically using the time from a digital channel. ✎The antenna must be connected in order to set the time automatically. – Manual: Set the current time manually. ✎Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Clock Set: Set the Day, Month, Year, Hour, Minute and am/pm manually. ✎Available only when Clock Mode is set to Manual. ✎You can set the Month, Day, Year, Hour, and Minutel directly by pressing the number buttons on the remote control. DST (Daylight Saving Time) (Off / On): Switches the Daylight Saving Time function on or off. ✎This function is only available when the Clock Mode is set to Auto. Time Zone: Select your time zone. ✎This function is only available when the Clock Mode is set to Auto.

 MENU  Setup  Time  Sleep Timer  ENTER ■ Sleep Timer  : Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). ✎To cancel the Sleep Timer, select Off.  Setting the On/Off Timer  MENU  Setup  Time  Timer 1  ENTER ■ Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first. On Time / Off Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.) Volume: Set the desired volume level. Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select Air or Cable. Channel (when the Source is set to TV): Select the desired channel. Contents (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically. ✎NOTE  If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly.  When there is only one photo file in the USB, the Slide Show will not play.  If a folder name is too long, the folder cannot be selected.  Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. ✎The mark indicates the day is selected. ✎Auto Power Off (available only when the TV is turned on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.  Locking Programs  MENU  Setup  Security  ENTER Security ■ V-Chip: The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identification number) before any of the V-Chip restrictions are set up or changed. ✎NOTE  V-Chip is not available in HDMI, Component or PC mode.  The default PIN number of a new TV set is “0-0-0-0”.  Allow All: Press to unlock all TV ratings.  Block All: Press to lock all TV ratings. V-Chip Lock (Off / On): You can block rated TV Programs. TV Parental Guidelines: You can block TV programs depending on their rating. This function allows you to control what your children are watching. 10 TV Air 1 00 00 am 00 00 am ▲ ▼   (/' (;;/' !' ) 4 ) 4   /   / 3&  () &)       4 S2 5 & &

TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience – ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog ✎The V-Chip will automatically block certain categories dealing with more sensitive material. For example, if you block the TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TVPG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked. MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children. – G: General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No children under age 17. / X: Adults only. / NR: Not rated. ✎The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the PG-13 category, then R, NC-17 and X will automatically be blocked. Canadian English: You can block TV programs depending on their Anglophone Canadian rating. – C: Programming intended for children under age 8. / C8+: Programming generally considered acceptable for children 8 years and over to watch on their own. / G: General programming, suitable for all audiences. / PG: Parental Guidance. / 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14. / 18+: Adult programming. ✎The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the G category, then PG, 14+ and 18+ will automatically be blocked. Canadian French: You can block TV programs depending on their French Canadian rating. – G: General / 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. / 13 ans+: Programming may not be suitable for children under the age of 13. / 16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming restricted to adults. ✎The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also. Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels. ✎NOTE  If information is not downloaded from the broadcasting station, the Downloadable U.S. rating menu is deactivated.  Parental restriction information is automatically downloaded while watching DTV channels. It may take several seconds.  The Downloadable U.S. rating menu is available for use after information is downloaded from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use.  Parental restriction levels differ depending on the broadcasting station. The default menu name and Downloadable US rating change depending on the downloaded information.  Even if you set the on-screen display to another language, the Downloadable U.S. Rating menu will appear in English only.  The rating will automatically block certain categories that deal with more sensitive material.  The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc) may differ depending on the broadcasting station. ■ Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Confirm New PIN screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized.

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: This channel is blocked by V-Chip. Please enter the PIN to unblock. ✎If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to “0-0-0-0” : POWER (off)  MUTE  8  2  4  POWER (on).  Other Features  MENU  Setup  ENTER Menu Language Set the menu language. 1. Select Menu Language and press the ENTER button. 2. Choose desired language and press the ENTER button. ✎Choose between English, Español and Français. Caption (On-Screen Text Messages) ■ Caption (Off / On): You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. ✎The Caption feature doesn’t work in Component, HDMI or PC modes. ■ Caption Mode: You can select the desired caption mode. ✎The availability of captions depends on the program being broadcast. Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.) Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions function works with digital channels. ✎Service1~6 may not be available in digital caption mode depending on the broadcast. ■ Digital Caption Options: (digital channels only) Size: Options include Default, Small, Standard and Large. The default is Standard. Font Style: Options include Default and Styles 0 to 7. The default is Style 0. Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White. Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black. Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing. Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing. Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default. ✎NOTE  Digital Caption Options are available only when Default and Service1 ~ Service6 can be selected in Caption Mode.  The availability of captions depends on the program being broadcasted.  The Default setting follows the standards set by the broadcaster.  The Foreground and Background cannot be set to have the same color.  You cannot set both the Foreground Opacity and the Background Opacity to Transparent. General ■ Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game mode. ✎NOTE  Precautions and limitations for game mode – To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. – If you display the TV menu in Game Mode, the screen shakes slightly.  Game Mode is not available when the input source is set to TV or PC.  After connecting the game console, set Game Mode to On to prevent poor picture quality.  If Game Mode is On: Picture mode is set to Standard and Sound mode is set to Movie.  Selecting Reset after adjusting the equalizer returns the equalizer to its default settings.

Transparency of the menu. ■ Melody (Off / Low / Medium / High): Set so that a melody plays when the TV is turned on or off.  Picture In Picture (PIP) PIP  You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.  MENU  Setup  PIP  ENTER ✎NOTE  For PIP sound, refer to the Sound Select instructions.  If you turn the TV off while watching in PIP mode, the PIP window will disappear.  You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.  While V-Chip is in operation, the PIP function cannot be used.  PIP Settings Main picture Sub picture Component, HDMI1/DVI, HDMI2, HDMI3, HDMI4, PC TV ■ PIP (Off / On): Activate or deactivate the PIP function. ■ Air/Cable (Air / Cable): Select either Air or Cable as the input source for the sub-screen. ■ Channel: Select the channel for the sub-screen. ■ Size ( / ): Select a size for the sub-picture. ■ Position ( /  /  / ): Select a position for the sub-picture. ■ Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode. Support Menu  MENU  Support  ENTER Self Diagnosis ■ Picture Test: Use to check for picture problems. Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG). No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual. ■ Sound Test: Use the built-in melody sound to check for sound problems. ✎If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. ✎The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button. Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG). No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual. ■ Signal Information: (Digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. ■ Troubleshooting: If the TV seems to have a problem, refer to this description. ✎If none of these troubleshooting tips apply, contact the Samsung customer service center.

latest firmware from “www.samsung.com,” to a USB memory device. Current Version - the software already installed in the TV. ✎Software is represented as “Year/Month/Day_Version”. Installing the Latest Version ■ By USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www. samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade. ■ Alternative Software (Not available) HD Connection Guide Refer to this information when connecting external devices to the TV. Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software. TV Rear Panel USB Drive    "<X"   & 4 ; $& 4 5 & & &&  ! &2 J=?=Z=?Z?[\=====?

1. Turn on your TV. 2. Connect a USB device containing photo, music and/or movie fi les to the USB (HDD) jack on the side of the TV. 3. When USB is connected to the TV, popup window appears. Then you can select Media Play . ✎ It might not work properly with unlicensed multimedia files. ✎ Need-to-Know List before using Media Play (USB)  MTP (Media Transfer Protocol) is not supported.  The file system supports FAT16, FAT32 and NTFS.  Certain types of USB Digital camera and audio devices may not be compatible with this TV.  Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.  Before connecti ng your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.  Connect a USB HDD to the dedicated port, USB 1 (HDD) port.  Do not disconnect the USB device while it is loading.  The higher the resolution of the image, the longer it takes to display on the screen.  The maximum supported JPEG resolution is 15360X8640 pixels.  For unsupported or corrupted files, the “Not Supported File Format” message is displayed.  If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.  MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.  If more than 2 PTP devices are connected, you can only use one at a time.  If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.  If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.  If the TV has been no input during time set in Auto Protection Time , the Screensaver will run.  The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. MEDIA.P Enjoy photos, music and/or movie fi les saved on a USB Mass Storage Class (MSC) device.  MENU   Application  Media Play (USB)  ENTER  TV Rear Panel USB Drive SUM . 4) ! $ 4) 25 & & -< ! 2

played. ✎Supports the View Devices and Home in Media Play homepage. Videos Playing Video 1. Press the  or  button to select Videos, then press the ENTER button in the Media Play menu. 2. Press the /// button to select the desired video in the file list. 3. Press the ENTER button or  (Play) button. – The selected file is displayed on the top with its playing time. – If video time information is unknown, play time and progress bar are not displayed. – During video playback, you can search using the  and  button. ✎In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself.  Supported Subtitle Formats Name File extension Format MPEG-4 time-based text .ttxt XML SAMI .smi HTML SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .txt string-based Movie 01 avi 00 04 03 / 00 07 38 1/1 SUM -2 c'/2 & Information: You can ascertain the selected file name and the number of files and page. Sort List Section: Displays the sorting standard. ✎The sorting standard is different depending on the contents. Operation Buttons Red (Change Device): Selects a connected device. B Green (Preference): Sets the file preference. (not supported in Basic view) Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol. Blue (Sorting): Selects the sort list.  Tools: Displays the option menu. ✎Using the  (REW) or  (FF) button, file list can move to next or previous page. File List Section: You can confirm the files and groups that are sorted by category. Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 /Movie 01.avi 1/1 Movie 01.avi SUM Movie 03.avi Movie 05.avi Movie 07.avi Movie 09.avi Movie 02.avi Movie 04.avi Movie 06.avi Movie 08.avi Movie 10.avi    ) & ./2 ! 2 -. . 4)

File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbsp) Audio Codec *.avi *.mkv AVI MKV Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8 MP3 / AC3 / LPCM / ADPCM / DTS Core XviD 1920x1080 6 ~ 30 8 H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 *.asf ASF Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8 MP3 / AC3 / LPCM / ADPCM / WMA XviD 1920x1080 6 ~ 30 8 H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 *.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA *.mp4 MP4 H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MP3 / ADPCM / AAC MPEG4 SP / ASP 1920x1080 6 ~ 30 8 XVID 1920x1080 6 ~ 30 8 *.3gp 3GPP H.264 BP / MP / HP 1920x1080 6 ~ 30 25 ADPCM / AAC / HE-AAC MPEG4 SP / ASP 1920x1080 6 ~ 30 8 *.vro VRO VOB MPEG1 1920x1080 24 / 25 / 30 30 AC3 / MPEG / LPCM MPEG2 1920x1080 24 / 25 / 30 30 *.mpg *.mpeg PS MPEG1 1920x1080 24 / 25 / 30 30 AC3 / MPEG / LPCM / AAC MPEG2 1920x1080 24 / 25 / 30 30 H.264 1920x1080 6 ~ 30 25 *.ts *.tp *.trp TS MPEG2 1920x1080 24 / 25 / 30 30 AC3 / AAC / MP3 / DD+ / HE-AAC H.264 1920x1080 6 ~ 30 25 VC1 1920x1080 6 ~ 30 25 Other Restrictions ✎NOTE  If there are problems with the contents of a codec, the codec will not be supported.  If the information for a Container is incorrect and the file is in error, the Container will not be able to play correctly.  Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.  If the Index Table is in error, the Seek (Jump) function is not supported. Video Decoder Audio Decoder • Supports up to H.264, Level 4.1 • H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. • GMC is not supported. • H.263 is not supported. • Supports up to WMA 7, 8, 9, STD • WMA 9 PRO does not support 2 channel excess multi channel or lossless audio. • WMA sampling rate 22050Hz mono is not supported.

If you exit the playing movie function, the movie can be played later from the point where it was stopped. 1. Select the movie file you want to play continuously by pressing the  or  button to select it from the file list section. 2. Press the  (Play) / ENTER button. 3. Select Play Continuously (Resume Play) by pressing the Blue button. The Movie will begin to play from where it was stopped. ✎The Blue button is available when resuming play. ✎If the Continuous Movie Play Help function is set to On in the Settings menu, a pop-up message will appear when you resume play a movie file. Music Playing Music 1. Press the  or  button to select Music, then press the ENTER button in the Media Play menu. 2. Press the /// button to select the desired Music file in the file list. 3. Press the ENTER button or  (Play) button. – During music playback, you can search using the  and  button. –  (REW) and  (FF) buttons do not function during play. ✎Only displays the files with MP3 and PCM file extension. Other file extensions are not displayed, even if they are saved on the same USB device. ✎If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.) Photos Viewing a Photo (or Slide Show) 1. Press the  or  button to select Photos, then press the ENTER button in the Media Play menu. 2. Press the /// button to select the desired photo in the file list. 3. Press the ENTER button or  (Play) button. – While a photo list is displayed, press the  (Play) / ENTER button on the remote control to start the slide show. – All files in the file list section will be displayed in the slide show. – During the slide show, files are displayed in order. ✎Music files can be automatically played during the Slide Show if the Background Music is set to On. ✎The BGM Mode cannot be changed until the BGM has finished loading. 3/15 I Love you Jhon Music 1 No Singer Music 2 No Singer Music 3 No Singer Music 4 No Singer Music 5 No Singer I Love You Jhon 1st Album Pop 2010 4.2MB 01:10 / 04:02 SUM -2 c'/2 & -<2 Image1024.jpg 1024x768 2010/2/1 3/15 SUM -2 -& 42Z j /2 & &' Movie 01 avi 00 04 03 / 00 07 38 1/1 SUM Play continuouslyPauseJumpToolsReturn  2' 2<.;&'  2 4 $  2)  k -<) 2<

Playing selected video/music/photo files 1. Press the Yellow button in the file list to select the desired file. 2. Repeat the above operation to select multiple files. ✎NOTE  The mark appears to the left of the selected files.  To cancel a selection, press the Yellow button again.  To deselect all selected files, press the TOOLS button and select Deselect All. 3. Press the TOOLS button and select Play Selected Contents. Playing the video/music/photo file group 1. While a file list is displayed, move to any file in the desired group. 2. Press the TOOLS button and select Play Current Group.  Media Play - Additional Functions Sorting the file list Press the Blue button in the file list to sort the files. Category Operation Videos Music Photos Basic View Displays the whole folder. You can view the photo by selecting the folder. Title Sorts and displays the file title in Symbol/Number/Alphabet/Special order. Preference Sorts and displays the file by preference. You can change the file preference in the file list section using the Green button. Latest Date Sorts and shows files by the latest date. Earliest Date Sorts and shows files by the earliest date. Artist Sorts the music file by artist in alphabetical order. Album Sorts the music file by album in alphabetical order. Genre Sorts music files by the genre. Mood Sorts music files by the mood. You can change the music mood information. Monthly Sorts and shows photo files by month. 1/1 /Movie 01 avi SUM Movie 01 avi Jan 10 2010 Jan 10 2010 Jan 10 2010 Jan 10 2010 Jan 10 2010 Jan 10 2010 Jan 10 2010 Jan 10 2010 Jan 10 2010 Jan 10 2010 Movie 03 avi Movie 05 avi Movie 07 avi Movie 09 avi Movie 02 avi Movie 04 avi Movie 06 avi Movie 08 avi Movie 10 avi . 4)   ) & ./2 ! 2 Jl 22  )  -.

During file playback, press the TOOLS button. Category Operation Videos Music Photos Title You can move the other file directly. Repeat Mode You can play movie and music files repeatedly. Picture Size (Mode1 / Mode2 / Original) You can adjust the picture size to your preference. Picture Setting You can adjust the picture setting. (p. 16, 17, 18, 19) Sound Setting You can adjust the sound setting. (p. 19, 20) Subtitle Setting You can play the video with Subtitles. This function only works if the subtitles are the same file name as the video. Stop Slide Show / Start Slide Show You can start or stop a slide Show. Slide Show Speed You can select the slide show speed during the slide show. Background Music You can set and select background music when watching a slide Show. Zoom You can zoom into images in full screen mode. Rotate You can rotate images in full screen mode. Information You can see detailed information about the played file. Settings Using the Setup Menu ■ Continuous Movie Play Help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie playback. ■ Get DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using Media Play, the registration is completed. ✎For more information on DivX® VOD, visit “www.DivX.com.” ■ Get DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated. ■ Information: Select to view information about the connected device.

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to a Samsung Home Theater 1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. 2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. ✎NOTE  Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theater.  When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theater’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home Theater, not the TV.  You can connect only one Home Theater.  You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.  Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.  Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. TV Rear Panel Home Theater Anynet+ Device 1 Anynet+ Device 2, 3, 4 HDMI cable (Not Supplied) HDMI cable (Not Supplied) HDMI cable (Not Supplied) Optical Cable (Not Supplied)

Anynet+ Menu Description View TV Changes Anynet+ mode to TV broadcast mode. Device List Shows the Anynet+ device list. (device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that support the recording function.) Stop Recording: (*recorder) Stops recording. Receiver Sound is played through the receiver. If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).  Setting Up Anynet+  MENU  Application  Anynet+ (HDMI-CEC)  ENTER ■ Setup Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. ✎When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off. ✎The active source on the TV must be set to TV to use the Anynet+ function. ✎Even if an external device is still recording, it may turn off.  Switching between Anynet+ Devices 1. Anynet+ devices connected to the TV are listed. ✎If you cannot find a device you want, press the Red button to refresh the list. 2. Select a device and press the ENTER button. You can switch to the selected device. ✎Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.  Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.  If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

1. Select Recording. ✎When there are more than two recording devices  When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List. ✎When the recording device is not displayed, select Device List and press the Red button to search devices. 2. Press the EXIT button to exit. ✎You can record the source streams by selecting Recording: (device_name). ✎Pressing the  (REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded. ✎Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.  Listening through a Receiver You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. ✎If your receiver supports audio only, it may not appear in the device list. ✎The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. ✎When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. ✎If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again. ✎NOTE  You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.  The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.  The Anynet+ functions do not operate with other manufacturers’ products.

Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Only one receiver (home theater) can be connected. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connections. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Check whether the TV remote control is in TV mode. • Check whether the remote control is Anynet+ compatible. • Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play (USB) or Plug & Play (initial setup), etc.) • When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. • Check if the Anynet+ Function of Anynet+ device is set on. I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View TV in the Anynet+ menu. • Press the SOURCE button on the TV remote control and select a non- Anynet+ device. • Press , PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) The message “Connecting to Anynet+ device...” appears on the screen. • You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. • Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. • You cannot use the play function when Plug & Play (initial setup) is in progress. The connected device is not displayed. • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Search Anynet+ devices again. • You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. • If connection is terminated because there has been a power interruption or the HDMI cable has been disconnected, please repeat the device scan. The TV Program cannot be recorded. • Check whether the antenna jack on the recording device is properly connected. The TV sound is not output through the receiver. • Connect the optical cable between TV and the receiver.

Stand Type Enclose the cables in the Cable Tie so that the cables are not visible through the transparent stand. 1 2 3 1 3 2 Wall-Mount Type ✎Do not pull the cables too hard when arranging them. This may cause damage to the product’s connection terminals.

Assembling the Blanking Bracket When installing the TV onto a wall, attach the Blanking Bracket as shown. Assembling Power-Cord When Installing the TV onto a wall, attach the Power-Cord as Shown. 1 2 3 1. Remove the screw shown in the first picture above. 2. Attach the power cord clamp to the power cord. 3. Mount the power cord clamp to the TV, using the removed screw, as shown. Preparing before installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring. Installing the Wall Mount Kit The wall mount kit (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Blanking Bracket

✎The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. ✎NOTE  Standard dimensions for wall mount kits are shown in the table below.  When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.  Do not use screws that do not comply with the VESA standard screw specifications.  Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.  For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.  Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.  Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.  Do not mount the TV at more than a 15 degree tilt.  Always use two people to mount the TV to a wall. Product Family inches VESA Spec. (A * B) Standard Screw Quantity LED TV [Ultra-Slim] 19~22 75 X 75 M4 4 23~29 200 X 100 M8 32~37 200 X 200 40~55 400 X 400 56~65 600 X 400 Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. ✎Please find a “” icon on the rear of the TV. A kensington slot is beside the “” icon. 1. Insert the locking device into the Kensington slot on the LED TV and turn it as shown . 2. Connect the Kensington Lock cable . 3. Fix the Kensington Lock to a desk or a heavy stationary object. ✎The locking device has to be purchased separately. ✎The location of the Kensington slot may be different depending on the TV model. 1 2 3

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. Accessories TV-Holder Screw (M8 X L19) To prevent the TV from falling 1. Remove the screw attached to the back of your TV, then connect the Holder-TV to the TV with the screw. ✎Make sure to only use the supplied screw. 2. Firmly fasten the screw to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screw fastened on the wall or cabinet so that the TV is fixed. ✎Only the screw needed to attach the holder to the TV is supplied. The screw to attach the Holder to the wall or cabinet must be purchased separately. We recommend purchasing a size M4xL20 wood screw. ✎Purchase the screws to be used on the wall or cabinet separately. ✎Install the TV close to the wall so that it does not fall. ✎When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes. ✎Check the cord occasionally to make sure it is secure. ✎Before moving the TV, separate the connected cord first. 3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

apply, visit “www.samsung.com,” then click on Support, or call Samsung customer service at 1-800-SAMSUNG. Issues Solutions and Explanations Poor picture First of all, please perform the Picture Test and confirm that your TV is properly displaying the test image. (go to MENU - Support - Self Diagnosis - Picture Test) (p. 24) If the test image is properly displayed, the poor picture may be caused by the source or signal. The TV image does not look as good as it did in the store. • If you have an analog cable/satellite box, upgrade to an HD digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. • Cable/Satellite subscribers: Try HD stations from the channel line up. • Antenna connection: Try HD stations after performing Auto program. ✎ Many HD channels are upscaled from SD(Standard Definition) contents. • Adjust the Cable/Sat box video output resolution to 1080i or 720p. The picture is distorted: macroblock error, small block, dots, pixelization. • Compression of video contents may cause picture distortion, especially in fast moving pictures such as sports and action movies. • Low signal level can cause picture distortion. This is not a TV problem. Color is wrong or missing. • If you’re using Component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause color problems or a blank screen. There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture mode / Color / Brightness / Sharpness) (p. 16) • Adjust Energy Saving option in the TV menu. (go to MENU - Picture - Eco Solution - Energy Saving) (p. 16) • Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset) (p. 18) There is a dotted line on the edge of the screen. • If the picture size is set to Screen Fit, change it to 16:9 (p. 17). • Change cable/satellite box resolution. The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV. When changing channels, the picture freezes or is distorted or delayed. • If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes) • Set the output resolution of the cable box to 1080i or 720p. Sound Problem First of all, please perform the Sound Test to confirm that your TV audio is properly operating. (go to MENU - Support - Self Diagnosis - Sound Test) (p. 24) If the audio is OK, the sound problem may caused by the source or signal. There is no sound or the sound is too low at maximum volume. • Please check the volume the of device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV. The picture is good but there is no sound. • Set the Speaker Select option to TV Speaker in the sound menu. (p. 20) • If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. • If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV). • If you are using a DVI to HDMI cable, a separate audio cable is required. • If your TV has a headphone jack, make sure there is nothing plugged into it. • Reboot the connected device by reconnecting the device’s power cable. The speakers are making an inappropriate noise. • Check the cable connections. Make sure a video cable is not connected to an audio input. • For antenna or Cable connections, check the signal strength. Low signal level may cause sound distortion. • Perform the Sound Test as explained above. No Picture, No Video The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV. • Make sure the wall outlet is working. • Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work” below. The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Setup menu (p. 21). • If your PC is connected to the TV, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the TV. • When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal.

There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and external devices). • Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. • Make sure your connected devices are powered on. • Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control. • Reboot the connected device by reconnecting the device’s power cable. RF(Cable/Antenna) Connection The TV is not receiving all channels. • Make sure coaxial cable is connected securely. • Please try Auto Program to add available channels to the channel list. Go to MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options (STD, HRC and IRC) (p. 15). • Verify the Antenna is positioned correctly. No Caption on digital channels. • Check Caption Setup menu. Try changing Caption Mode Service1 to CC1 (p. 23). • Some channels may not have caption data. The picture is distorted: macroblock error, small block, dots, pixelization. • Compression of video contents may cause picture distortion, especially with fast moving pictures such as sports and action movies. • A low signal can cause picture distortion. This is not a TV problem. PC Connection A “Mode Not Supported” message appears. • Set your PC’s output resolution so they match the resolutions supported by the TV (p. 12). “PC” is always shown on the source list, even if a PC is not connected. • This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected. The video is OK but there is no audio. • If you are using an HDMI connection, check the audio output setting on your PC. Others Purple/green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection. • Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box has a grounding issue. Replace the Component video cables with an HDMI connection. The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3) contents. • Black bars on the Top & Bottom will appear during movies that have aspect ratios different from your TV. • Adjust the picture size options on your external device or TV to full screen. The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction. • Clean the sensor’s transmission window on the remote. • Try pointing the remote directly at the TV from 5~6 feet away. A ‘Mode Not Supported’ message appears. • Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to the resolution settings on page 12 of this manual. Caption on TV menu is greyed out. • Caption can not be selected in the TV menu when connected via HDMI or Component (p. 23). • Caption must be activated on the external device (p. 23). There is a plastic smell from the TV. • This smell is normal and will dissipate over time. The TV Signal Information is unavailable in the Self Diagnostic Test menu. • This function is only available with digital channels from an Antenna/RF/Coax connection (p. 24). The TV is tilted to the side. • Remove the base stand from the TV and reassemble it. The channel menu is greyed out (unavailable). • The Channel menu is only available when the TV source is selected. Your settings are lost after 30 minutes or every time the TV is turned off. • If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the SOURCE button to select TV mode, and go to MENU  Setup  Plug & Play  ENTER (p. 8).

You have intermittent loss of audio or video. • Check the cable connections and reconnect them. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90 degree connectors. You see small particles when you look closely at the edge of the frame of the TV. • This is part of the product’s design and is not a defect. The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3) contents. • Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. • Adjust the picture size options on your external device or TV to full screen. POP (TV’s internal banner ad) appears on the screen. • Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8). ✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.  License Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved. DivX Certified to play DivX video up to HD 1080p, including premium content. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on- Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Pat. 7,295,673; 7,460,688; 7,519,274 Open Source License Notice In the case of using open source software, Open Source Licenses are available on the product menu.

Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 50°F to 104°F (10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F (-20°C to 45°C) 5% to 95%, non-condensing Stand Swivel (Left / Right) -20˚ ~ 20˚ Model Name UN32C4000 Screen Size (Diagonal) 32 inches (31.5 inches measured diagonally) Sound (Output) 10 W X 2 Dimensions (WxDxH) Body With stand 30.5 X 1.2 X 19.4 inches (774.6 X 29.9 X 491.8 mm) 30.5 X 10.0 X 21.6 inches (774.6 X 255.0 X 549.1 mm) Weight Without Stand With Stand 18.5 lbs (8.4 kg) 20.3 lbs (9.2 kg) ✎Design and specifications are subject to change without prior notice. ✎This device is a Class B digital apparatus. ✎For information about power supply, and more about power consumption, refer to the label attached to the product.

(Unit: inch) Model name       UN32C4000 30.5 27.5 15.5 18.4 19.4 21.6 1.2 10.0 ■ Jack panel detail / Rear view (Unit: inch) Model name        UN32C4000 7.9 7.9 27.6 2.8 11.1 2.9 2.6 10.3 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2010 Samsung Electronics America, Inc             

12 Connecting to an Audio Device 11 D DIGITAL AUDIO OUT 11, 32 DivX® VOD 31 D-sub 12 Dynamic 16 Dynamic Contrast 17 E Edit Name 13 Editing Channels 15 Energy Saving 16 Equalizer 19 External Speaker 20 F FAV.CH button 7, 14 Favorite Channel 14 Film Mode 18 Fine Tune 16 Frequency 12 H HDMI 9, 32 Home theater 11, 32 I Installation Space 2 L Language 23 License 42 M Media Play 26 Melody 24 Menu Transparency 24 Mono 19 Music 29 N Navigate 13 O Optimal resolution 12 P Photos 29 Picture Size 17, 31 PIP (Picture In Picture) 24 Plug & Play 8 Power Indicator 6 R Receiver 34 Recording 34 Remote Control 7 Repeat Mode 31 RGB Only Mode 17 Rotate 31 S Select All 15 Self Diagnosis 24 Sharpness 16 Signal Information 24 Sleep Timer 21 Slide Show 29 Software Upgrade 25 Source List 13 Speaker Select 20 Specifications 43 Standby mode 6 Symbol 3 T Timer 21 Title 30 Tools 3 Troubleshooting 40 TV Speaker 20 U USB Drive 25, 26 V Video Formats 28 Videos 27 Virtual Surround 19 Volume 6 W Wall Mount 37 Warm 17 White Balance 17

     (""!" #( ) '  '(  !"#$%"&% " !*!"" #+" *" $ %&' )    "*  ),  $ %&-../0 111'' 2)"'#)   ")$#34 5/ )" $26)3   $ %&-../0 111'' )'7 .8'7"$9' #'.  )')!!$#,$:" $;,'< %' '  $ %&-../0 111'' 2#'  ) 5"5"="79#>.

I'Iu\I&PIr, ~ 1Itrni:Mn9 - orve- " _.~ -----~----- - - .".... -, .ea. ~ ~ 1"'1 Plu<.l&P1d' .,~,~,",~ c=J , " 4 The TV IT'lllfT'OI1Zes the avadabIe chamels, Ths process C'n. '=2=•• Quick Setup Guide 1 ~~~~,,~ :.'":~~ Stand uslog Iotx saews (M4 X ~ . L12) as s!'"oo'wl1. '- To nstal bananas Jllo you: l'OOlOte COl1tro1. foIow these steps' 1. Ufi the cover on the back 01 the IlllTIOle~ as soown Jl the ligue 10 the right. 2. Install two AM batteries, ~ Make SlX810 match the + and - ends o! the ballerl9S to the diagr

Remote Control Buttons and Functions ~ ThIS is a speaal remote contfollor the VIsually Impaired and has Braille pl)nts on the Power, Channel and Volume buttons Adjust the vok..me by~ the voune button +I~ ~It'-= II Olange the channels by pressing the Chamel bvnoo on the rEmOte. on the remota. I:' C!J "1·1 ~ Hyour -r:' IS 3nach&d. 10 acable or sateU'le boK. change the chameI USlOQ ~ the box s remote - ~ You can also change the chaMels by press.ng the V CH A button on the front panel 01 your TV aroer adjuslthe YOIWte by pres$II'lQ the - VOL+ OOllon. DesCri lion BrIghtens P1ClOOl. For a VIbrant, Erllanced mage 111 bngtlW lit or """~ Fer a bright. det8IIed pcture 111 a I'lOrITIatt iii room. """ s........ ~~~.~1~~9..~~.~. ~i~~l!~_.~~~... yOU" TV has three preset Picture Modes WIth laetory oo,.med setllOQS, each deSIgned to grye you an excellent pictlJ'll I.Jlder specific cordtlOnS To change the Picture mode. press the P.MODE button on you remote, The lIrs 1lme you press n, you TV

TV from shipping box Installing the TV Stand o Components When installing the stand, use the provided components and parts. OO~T .. . 1 EA • M @~ @S'- SEA (M4 X L12) SEA(M4 X L8) Stand (depending on the model) Guide Stand Screws ....•. ~~ ":"j ~ -------_... ~_--------- ---------- -- ----- : '. : : : I • I I : ~. : I 8 ~'--, : I : ~,. • • I, I r-,' 4 • ~,' ~; 1 --~-)~ ~ ~ ~,', . I I : I\~} : : 1 ~~~~~ Top View ®.~ ... : .. . . ., ,. 6 @4EA @lEA--· e o Caution,:, » Make sure to distinguish between the front and back of each component when assembling them.- ,... » Make sure that at least two persons)i~and move the TV. » Stand the product up and fasten the screws. If you fasten the screws with therv placed down, it may lean to one side.

retirer Ie televiseur de la boite Installation du support de televiseur • Elements •........ Pour installer Ie support, utiliser les pieces et elements fournis. (IJ~ : .. . 1 EA • • ~ S-- ~t- 5EA (M4 X L12) 5EA(M4X L8) Support (Selon Ie modele) Guide de support Vis --------",.~::]~~~..~..._-- -- ----- : At: : : • • I I : : rn. ~ ..--, : • I • ' ............ \ I • :: ~'\~I~' I • . . ' I I _..., - • ~=-' ~,~, • : I\~,~~ L ~: e Vue de dessus T ~-_.-.... ~ .. --=='=--.- 1J4EA o Attention >- Assurez-vous de bien distinguer Ie devantet l'endos de chaque elementlorsde 1'l3S$emblage. >- Assurez-vous qu'au moins deux personnesSoulElVent eid~placent Ie t6Ievl$eur. . - . .... .. >- Placez I'appareil ala verticale puis resserrez lEis vis. Si Itouslesvissez alorsque leteleviseur est tion horizontale, iI pourrait penche{d\in COte. - - 00 °o_••••~ ••0000 - 0 • 0.' • '0 - .0 0 0 •• ._0

el TV del embalaje Instalacion del soporte del TV • Componentes L..... Cuando instale el soporte, use los componentes y partes incluidas. ~~ . ~ .. . 1 PZ • M ~ S-- ~S- 5 PZS (M4 X L12) 5 PZS (M4 X L8) Soporte (Segun el modelo) Guia del Soporte Tornillos ...,.. . ",::'( ~ --------" ~•.I._.•_.._ -•..•..... .- ----- · .. . • I I I I • I • : : :-m. ",-.." : · " '~\. · : : \~ .."'"": I I __ " - ~ ~=-' ~'.:a., , : ~~,' : ~----~~~~~ e Vista superior til 4 PZS o :>- A~egute~ de distinguir entrela partEl.cjelantera y posterior de cada componente al momento de ensamblarles. . .". >- Asegurese de que al menos dosP~r$Onaslevanten ymuevan el TV. POrler de pie el proCluc1oyasegurelOs femilles. Si aprieta los tornfllos sin levcmtar;e1TV, este puede inclinarsehacia uno de loslados.

: : !.~ ~ 0121011:: 0llI.j~ ~~1!';21 A11~X1I£ Af§61:<1 'MOI~Ail£l.. : .-------------------------------------------------------------------. :, A Use only the clean water to clean it. :, .. Don't use any chemical cleaner to clean this kind of : English Samsung crystal (Toe) product. : .-------------------------------------------------------------------. ,A N'utilisez que de I'eau pour nettoyer la surface exteme du Samsung Crystal (Matieres ' : organiQues totales). : , , , N'utilisez jamais de produils de nettoyage ou de produits chimiques autres que de I'aau. I : FranltSis N'uWisez que de !'eau comma produit de nettoyage. : .-------------------------------------------------------------------< :, A Utilizzare solo acqua per la pulizia della superficie esterna di Samsung Crystal (Toe). :, .. Non utilizzare mai soluzioni 0 sostanze chimiche per la pulizia; utilizzare solo acqua. : Italiano Come sostanza pulente, utilizzare solo acqua. : ,- --------------i :, A Utilize apenas agua como soluyao de limpeza para limpar a superficie exterior do :, .. Samsung Crystal (Toc). Utilize sempre agua e nunca outras solu¢es de limpeza nem : PortuguAs quimicos. Utilize apenas agua como solu~o de limpeza. : ___________________________________________________________________ i AJUI ~HCTKH BHewHeH noeepxHocTH Samsung Crystal (Toc) Hcnonb3yHTe B KCNeCTBe : ~HCTALllero paCTeopa TOl1bKO BOAY. : He nOl1b3YHTecb ~HCTSU1~HMH q>eACTBaMH H paCT90paMH, ICpOMe BOAbl. ' ~~~ ' '1......... V1cnol1b3yMTe AflA ~HCTKH TonbKo BOAY. , ___________________________________________________________________ i Verwenden Sie a's Reinigungsmittel bitte nur reines Wasser, wenn Sie die AuBenflachen : von Samsung Kristall (Toe) reinigen. : Verwenden Sie auBer Wasser keine anderen Reinigungsmittel und Chemikalien. , Deutsch Verwenden Sie nur Wasser als Reinigungsmittel. : • -------------_i :, A Utilice unicamente agua para limpiar la superficie del Samsung Crystal (Toc). :, .. No utilice productos quim;cos ni soluciones de limpieza aparte del agua. : Espa~1 Limpie unicamente con agua. : • i I Do czyszczenia zewOl~trznych powierzchni ur2C\.dzenia Samsung Crystal (Toc) nalezy , :A uzywa¢ wylC\.cznie wody. : I Nie wolno uzywa¢ zadnych innych srodk6w czyszczC\.cych lub chemikali6w. I : Polski Jedynym odpowiednim ~rodkiem czyszczC\.cym jest woda. : , - i Temizlemek ic;;in yalnlzca temiz su kutlanln. : Bu c;;e~it bir Samsung kristal (ToC) GrGnGnG temizlerken hemangi bir kimyasal temizleyici ', TOr1

_CIbiofl,"_""'_""""~_"_.""_."'6"be-: :!ROI ~ ~t ~~ .'PI8I2!! v.ol1Hl'* ~ : EIlliJIIIIh ........tOlll..,._~.v. _..abNt.._""'_: : ....._~~e~ ......a. : ._' : •........................_-------------.---.- ~ _._-~#_--------------.- - __ - : ce~I.II.... ..,'- ' I: $ , Lll _ ... 55 ' ' $ _ _ ..... i A =':"'"=;1: II. 7 ',pow 'e ,t '.' 1 A ~r":"__ 5":'~ t. II '''.$. :.. __ ~......'*'f.r.idt.d«...lIunl_.~lId11M.~ .. '.... I .".....__.'." .'IIdl..........."Si!ft_1lIir9n : ....,....-...-._m -.dtn'ldolr.,.Itd«""blPnL&; p'" _~._"',luIl"""'''''Aw''t "_"',SilbinI..._ i F...... =t:=-..:::::~dn_............It,-...... Deutectl ~:,l,~~.:==:==-.===.. : t h_ l' VIii S .._" .='. hi I •• nn_n f!:'. P.F ••9 ~ :",,'I~ '.~.a:-""I 0 :.dte,et;:..,,,=,c:- ',: ~",; ._~__ 4$ :..:..: :Z~1.' :-:,-r:t~ . , A ' ......d1f11_lopoMdII -lp ~chol_•• 7 , • •b.-1iI : 9mine1o.,' '.'deIP1O'lDN,.iJtld _ lac:sjl.m tllo fII*'....pAlalopsIW..-dII =b ~d1""""'I_bnilI:l.: QIIlIlwal........-clI!qllf......_, l*'!Oy....IDIIldI: . "-'leno cho ~.o d1....... .11I '0:.-...0 ,6__citl*'riob. "'••11'I_" 'i'\ft.OI'lp.lBcitImP-IoQjl. ua'Irico*---OopoIo~~llIIl:iopsr_...RXlodl"""':"""-- ~aideh '....pon:eioo*"'lo~. . e-I' ",.5 : F' e, _ ................................ ~ £. __..In f _ : ,. I I ,..... __ ' , ~5 1 _ •• I T_F I lS_. II I I, Ill. I••' tt ....., I : " I I'll utu,,; ' , _ "*-__ 1 : I. __ , I, ~" ....." : A ,h" ... ;'''_ 1.11';1 A • I',.: t :.. SoQICIoop6do_lo..llIddo......hpar.QlaPuropaacko."'-"dt .. l'l'ISdP'lT"d ."do -..-,....,....bNd....... l(j : poN.........,.,._dt• ..-u Opol'lOb'o:cIG>,'; ,.. Il'NSIIlDo.",...l"ao ~.....,IIIr*.;'zL lLIjmMIkL : Poi." huI, , h••,..odo...._._ ~Drsolsd.."'CI...._ Pogeld ~~....,............lIIOdt:l' "'IP .p:..Jt~C t od )od¥a , .....poI'IO_ 1C1io1do"""'*"'l'"'I_l~ , klInr*u.JItI.... """"l" iIo~. j, l"'lUChcI. , :..n.n ~.j !~.:, ~!.!.i!!'.~!..! 1 :..,.'±:::.~!I' __L!_I ~..!!.. __~}_ _'f_e_~.~ J n I ''''__".,."C'.C. t :. __ ~ • I 1__ """11. I ' , , I '''4« I...... ' IC.......-". ' I.101'..... , I 5:.. I II. /IopI;...-............C__C_,; '_"'_ A 00llibL...,* ,t,.Ilro:IL ~ baIa~ 'w 'Ioloo ...... __"-~.. ;"_'" ..,._ $ ;. .....00_.," ; ~ botbe 6 ~ ,......~ilIO;· ----__,,-.,;. TCRQa ~ l'6N'I_iIIIIIIpI l;:;:iII17 ,_........ "_; Ilooo__,",""""-,,_-,,, lcln ..... ..........::..._.. Z':01_":O~ .':O::'!!!'.~.!~:'1: h._.._... _~ __ n .. !u_:!__..)_:..!::.~.t.:... !.~!.L.. __..nn ..n_m_ ~llV'a.ftPf~ . lIlIU•. IllHIItMJl!"..,tl:U=, :I_Mit. -.RU5MfI!I*"". JtnJtill~.Mft : .~~-~...~.......~~ : ,RH~lJkM1"lI. : " ---------_.--------- . ( I

REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. ----~~,.~--'---------------. --~. ~------ This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. -----""-."..........~--~-~--- -----~-----_._-_....~ ~y._~---~-~ ..... o The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered. - Do not cover the slots and openings with a cloth or other materials. - Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface. - Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. - Install the product keeping the specified distance from the wall (see the information below.) * DLP TVs, Direct View Type TVs, and Projectors ~ IDcm * Products with 32" or larger display s ~ Scm * Other products ~ 4cm o Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight. o Do not place a water containing vessel (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock. o Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning. o This appratus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information. o Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock. o Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance. o To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges. o Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corrsponds to the local electrical supply. o Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock. o To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus. o Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands. o If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center. o Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house). - Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate. o Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set. o Use only a properly grounded plug and receptacle. - An improper ground may cause electric shock or equipment damage. (Class I Equipment only.) • To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. o Do not allow children to hang onto the product. o Store the accessories (battery, etc.) in a location safely out of the reach ofchildren. • Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration. • Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service center. o Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product. o Apparatus shall not be exposed to dripping or splashing. o Do not dispose of batteries in a fire. o Do not short circuit, disassemble or overheat the batteries. ~ o Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. o WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY , FROM THIS PRODUCT AT ALL TIMES. - English -

RETIREZ PAS LE CAPOT (NI LE PANNEAU ARRIERE). A L'fNTERIEUR DE L'APPAREIL. AUCUNE PIECE NE PEUT ETRE REPAREE PAR L'UT1L1SATEUR. POUR TOUT DEPANNAGE, ADRES5EZ·VOUS A UN SPECIALISTE. Ce symbole indique qu'une tension elevee est presente it l'interieur de I'appareil. Tout contact avec une piece situee it I'intcrieur de eet appareil est dangereux. Ce symbole vallS previcnt qu'une documentation importante relative au fonctionnement et a !'enlrctien est foumie avec Ie produit. ... . PRECAUClON: PARA REDUCIR EL PELIGRO DE DESCARGA ELECTRICA. NO RETIRE LA CUBIERTA. NO HAY PIEZAS EN EL INTERIOR QUE PUEDA REPARAR EL USUARIO. . CONSULTE AL PERSONAL CALIFICADO DE SERVICIO TECNICO. Este simbolo indica la presencia de alto voltaje en eI interior. Es peligroso entrar en contacto con cualquier pieza interior de este produclo. Este simbolo Ie alerta de que con este producto se incluye documentaci6n importante correspondiente al funcionamiento y mantenlmiento. • Les fentes et les ouvertures menagees dans Ie boitier ainsi qu'a l'arriere et au-dessous de I'appareil assurent la ventilation de ce dernier. Afin de garantir Ie bon fonctionnement de I'appareil et eviler les risques de surchauffe, ces fentes et ouvertures ne doivent ctre ni obstruees ni couvertes. - Ne couvrez pas les fentes et les ouvertures avec un morceau de tissu ou tout autre objet. - Ne les obstruez pas non plus en plal;am I'appareil sur un lit, un canape, un tapis au toute autre surface apparentee. - Ne placez pas I'appareil dans un environnement c10s tel qu'une bibliotheque ou une annoire encastree, saufsi une ventilation adequate est prevue. - Installez Ie produit en maimenant une distance eorrecte avec Ie mur (voir infonnations ci-dessous). *Televiseurs DLP, televiseurs de type Direct View et projeeteurs ---+ 10 em *Appareils dotes d'un eeran 32" ou plus ---+ 5 cm *Autres produits --+ 4 em • Ne placez pas I'appareil aproximite ou au-dessus d'un radiateur ou d'une bouche d'air chaud, de meme que dans un endroit expose ala lumiere directe du solei!. • Ne placez aucun recipient (vases etc.) d'eau sur I'appareil car cela represente un risque d'incendie ou de decharge electrique. • N'exposez pas I'appareil ala pluie et ne Ie placez pas aproximite d'une source d'eau, par exemple une baignoire, un lavabo, un evier, un bac de lavage, un sous-sol humide, une piscine, etc. Si I'app arcH vient actre mouille par accident, debranchez-Ie et contactcz immediatement un revendeur agree. Assurez-vous que Ie cordon d'alimentation est debranche avant de nettoyer Ie produit. • Cet appareil peut fonctionner sur piles. Dans un souci de preservation de I'environnement, la reglementation locale prevoit peut-etre des mesures specifiques de recuperation des piles usagees.Veuillez donc contacter les autorites competentes afin d'obtenir des infonnations sur la mise au rebut ou Ie recyclage des piles. • Evitez de surcharger les prises murales, les rallonges et les prises mult iples car cela entraine un risque d'incendie ou de decharge electrique. • Les cordons d'alimemation doivent etre deroutes de sorte qu'aucun objct place sur ou contre cux ne les chevauche ou les pince. Accordez une attention particuliere aux cordons au niveau des fiches, des prises et de la sortie de I'appareil. • En cas d'orage, ou bien lorsque vous vous absentez ou n'utilisez pas votre appareil pendant une longue periode, debranchez celui-ci de la prise murale et debranchez egalement Ie cable d'antenne ou Ie cordon de connexion au reseau cible. Ces precautions eviteront que I'appareil ne soit endornmage par la foudre ou par des surtensions. • Avant de raecorder Ie cordon d'alirnentation CA aIa prise de I'adaptateur CC, verifiez que la tension indiquee sur ce demier correspond bien ala tension delivree par Ie reseau electrique local. • N'inserez aucun objet metallique dans les ouvertures de I'appareil. vous risqueriez de recevoir une decharge electrique. • Afin d'eviter tout risque d'electrocution, ne rnettezjamais les doigts aI'interieur de l'appareil. Seul un technicien qualifie est habilite aouvrir Ie boitier de I'appareil. • Assurez-vous de bien braneher Ie cordon d'alimentation. Assurez-vous de bien lenir la prise en main lorsque vous la debranchez. Ne touchez en aucune circonstance Ie cordon d'alimentation avec les mains mouillees. • Si I'appareil ne fonetion ne pas normalement. en particulier s'i1 ernet des odeurs eudes sons anonnaux, debranchez-Ie immediatement et contactez un revendeur ou un centre de depannage agree. • Veillez abien debrancher Ie cordon d'alimentation si la television doit restee inutilisee, ou lorsque VOllS quittez votre domicile, pendant une periode assez longue (et plus specialement si des enfants, des personnes agees ou des majeurs incapables doivent rester seul avotre domicile). - L'accumulation de poussieres peut provoquer une electrocution, une peI1e d'energie, ou un incendie induit par Ie cordon d'alimentation, dii ades variations de tension, une surchauffe ou une deterioration de I'isolation. • Veillez it contacter un centre de services homologue lorsque vous installez votre televiseur dans un endroit tres poussiereux, humide, expose ades temperatures elevees ou faibles ou ades produits chimiques, ou s'il fonctionne sans interruption, par exemple dans les aeroports, les gares, etc. Si vous ne Ie faites pas, vous risquez d'endommager gravement votre tcleviseur. • Utiliser uniquement des prises corrcctement reliees ala terre. -Un sol inadapte peut causer un ehoc electrique ou un incendie. (Appareils de CLASSE I uniquement.) • Pour deconnecter I'appareil du secteur, la prise doit etre debranchee de la prise electrique du secteur. Par consequent, la prise du secteur doit etre en etat de marche. • Utiliser uniquement des prises correctement reliees ala terre. • Rangez les aceessoires (batterie, etc.) dans un endroit sur, hors de la portee des enfants. • N'installez pas Ie produit sur une surface instable telle qu'une etagere chancelante, un sol non horizontal ou un endroit soumis ades vibrations. • Ne faites ni tomber, ni subir de choc au produit. Si Ie produit est endommage, deeonncctez Ie cordon d'alimentation et contactez un centre de services. • Debranchez Ie cordon d'alimentation de la prise secteur et essuyez Ie produit it I'aide d'lln chiffon doux et sec. N'utilisez pas de produit chimique, tels que de la eire, du benzene, de I'akool, du diluant, de I'insecticide, du desodorisant, du lubrifiant ou du detergent. Cela peut endommager I'aspect ou effacer Jlimpression sur I'appareil. • L'appareH ne doit pas etre expose it I'humidite ni aux eclaboussures. • Ne jetez pas les batteries au feu. • Ne courl-circuitez pas ni ne desassemblez les batteries et ne les soumettez pas a une chaleur excessive. ~ • Un risque d'explosion survient si la batterie est replacee de maniere incorrecte. Ne la remplacez qu'avec une batterie du memetype. • AVERTISSEMENT - POUR EVITER TOUT RISQUE D'INCENDlE, VEILLEZ AGARDER CE PRODUIT LOIN DE BOUGIES OU D'AUTRES SOURCES DE FEU. • Las ranuras y aberturas existentes en la unidad y en la parte trasera 0 inferior se faeilitan para proporcionar la ventilacion necesaria. Para garantizar el funcionamiento fiable de este aparato, y para protegerlo frente a sobrecalentamiento, estas ranuras y aberturas nunca deben bloquearse ni cubrirse. - No cubra las ranuras y aberturas con un pano 0 con cualquier otro material. - No bloquee las ranuras ni aberturas eolocando este aparato sobre la cama, sofa, alfombra 0 superficie similar. - No coloque este aparato en un espacio cerrado, como una libreria, 0 un armario empotrado, a menos que se proporcione una ventilacion correcta. - Instale el producto conservando la distancia especificada respecto a la pared (vea la infonnacion siguiente). *Televisores DLP, televisores tipo visualizacion directa y proyectores ---+ 10 cm • Aparatos con una pantalla de 32" 0 mayor ~ 5 em * Otros productos --+ 4 em • No coloque este aparato cerca 0 sobre un radiador 0 una rejilla de aire caliente, 0 en lugares expuestos a luz solar directa. • No coloque recipientes con agua sobre este aparato (jarros, etc.), ya que podria representar riesgo de incendio 0 descarga electrica. • No exponga este aparato a la lIuvia ni 10 eoloque cerea de agua (cerca de una banera, lavabo, fregadero 0 lavadero, en un sotano humedo ni cerca de una piscina 0 similar). Si este aparato accidentalmente se moja, desenchufelo y pongase en contaeto inmediatamente con un tecnico autorizado. Antes de limpiar el producto desconecte el cable de alimentacion de la toma de corriente. • Este aparato utiliza baterias. En su comunidad puede que existan nonnativas que requieran la disposicion de estas baterias de forma adecuada bajo consideraciones ambientales. P6ngase en contacto con las autoridades locales para obtener infonnacion sobre desecho y reciclaje. • No sobrecargue las tomas murales, los alargadores ni los receptaculos correspondientes por encima de su capacidad, ya que esto puede generar incendios 0 deseargas electricas. • Los cables de alimentacion y proteccion deben colocarse de forma que no puedan pisarse ni quedar atrapados por objetos encima 0 contra ellos, poniendo especial atencion en los cables cerca del enchufe, los receptaculos de los electrodomesticos y el punto en el que salen del aparato. • Para proteger este aparato durante una tormenta electrica 0 cuando no 10 utilice durante largos periodos de tiempa, desenchUfelo de la torna de la pared y desconecte la antena 0 el cable del sistema. Esto evitanl. que el equipo se dane par rayos 0 picos de tension de la linea electrica. • Antes de coneclar el cable de alimenlaci6n de CA a la toma del adaptador de CC, asegurese de que la designacion del voltaje del adaptador de CC corresponde a la fuente electrica local. • Nunca inserte nada metalico en las aberturas del aparato. Hacerlo asi puede crear peligros de descarga eleetrica. • Para evitar descarga electrica, no toque nunea el interior de este aparato. Solo un tecnico calificado debe abrir el alojamiento del aparato. • Cuando conecte el cable de alimentacion compruebe que el enchufe este finnemente insertado. Para desenchufar el cable de alimentacion, sujetelo por el enchufe y tire de este para sacarlo de la toma de corriente. Nunca toque eI cable de alimentacion can las manos mojadas. • Si este aparato no funciona nonnalmente, en concreto, si emite sonidos extranos 0 desprende olores desde el interior, desenchUfelo inmediatamente y p6ngase en contacto con el distribuidor autorizado 0 el centro de servicio tecnico. • Asegurese de desconectar el enchufe de alimentacion de la torna de corriente si la TV ha dejado de utilizarse, 0 desea salir de casa, durante un largo periodo de tiempo (especialmente cuando sea necesario dejar solos en casa a ninos, aneianos 0 personas incapacitadas). - EI palvo acumulado puede provocar una descarga electrica, un cortocircuito 0 un fuego, haciendo que el cable electrico genere chispas y calor, 0 deteriorando la funda protectora. • Pongase en contacto con un centro de servicio tecnico autorizado cuando instale el aparato en un lugar expuesto a gran cantidad de polvo, temperaturas extremas, alto nivel de humedad y produetos quimicos, y en lugares donde se vaya a utilizar las 24 horas del dla, como aeropuertos, estaciones, etc. EI incumplimiento de estas indicaciones puede causar serios desperfectos en el aparato. • Cuando instale el equipo, procure guardar una distancia de mas de 10 em desde la pared para facilitar la ventilacion. • Use solamente conectores y receptaculos apropiados para hacer la conexion a tierra. -Una conexion a tierra inapropiada podria causar una descarga electrica 0 una averia en el equipo. (Solo equipo de Clase !.) • Para desconectar el aparato de la corriente, debe desenchufar el cable de la toma principal, por 10 que el enchufe principal debe estar siempre facilmente accesible. • No permita que los ninos jueguen con el producto. • Guarde los accesorios (pilas, etc.) en un lugar seguro fuera del alcance de los ninos. • No coloque el producto en un lugar inestable, inclinado 0 expuesto a vibraciones. • No 10 deje caer ni Ie de golpes. Si el producto se estropea, desenchufe el cable de alimentacion y pongase en contacto con un centro de servicio. • Desconecte el cable de alimentacion de la toma de corriente y seque el aparato con un pano suave y seco. No utilice ningun producto quimico como cera, benzol, alcohol, disolventes, insecticida, ambientador de aire, lubricante 0 detergente. Se puede danar el aspecto 0 borrar las estampaciones del producto. • Evite que cualquier Iiquido salpique el aparato 0 gotee sobre e1. • No tire las pilas al fuego. • No cOrlocircuite, desmonte ni sobrecaliente las pilas. ~ • Si la pila no se coloca correctamente se corre el riesgo de una explosion. Reemplace la pila solo por una igual 0 de especificaciones equivalentes. • ADVERTENCIA - PARA IMPEDIR QUE EL FUEGO SE PROPAGUE, MANTENGA LAS VELAS U OTRAS . LLAMAS EXPUESTAS SIEMPRE ALEJADAS DE ESTE PRODUCTO. - Espanal-

User must use shielded signal interface cables to maintain FCC compliance for the product. Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL Listed personal computer with similar configuration. Before making the connection, make sure the voltage rating of Ihe computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal or exceeds the monitor voltage rating. For 120 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type (parallel blades) plug cap. For 240 Volt applications use only UL Listed detachable power supply cord with NEMA configuration 6-15P type (tandem blades) plug cap. This television receiver provides display of television closed captioning in accordance with Section 15.119 of the FCC rules. (TV broadcast receivers with picture screens 13 inches or larger in diameter models only) Changes or modifications not expressly approved by the party responsible for compliance could void Ihe user's authority to operate the equipment. If necessary, consult with your dealer or an experienced radio/television technician for additiona suggestions. You may find the booklet called How to Identify and Resolve RadiolTV Interference Problems helpful. This booklet was prepared by the Federal Communications Commission. It is available from the U.S. Government Printing Office Washington, DC 20402, Stock Number 004-000-00345-4. The party responsible for product compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the follOWing two conditions: 1. This device m.ay not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, il not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radiolTV technician for help. User Information SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive Suite #290, Irvine, CA92612 USA - Federal Communications Commission (FCC) - USA - Industry Canada Equipment Standard for Digital Equipment (ICES-OOJ) - Canada - Voluntary Control Council for Interference (VCCI) - Japan - Bureau of Standards Metrology and Inspection (BSMI) - Taiwan • Korea Communications Commission (KCC) - Republic of Korea • Italian Post Ministry (Homologation) - Italy FCC Class A Notice FCC Class 8 Notice This device complies with part 15 ofthe FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, inclUding interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when Ihe equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Este simbolo indica a existencia de alta tensao no interior do televisor. EPerigoso toear em qualquer parte no interior do produto. Este simbolo infonna-o de que este produto inclui literaturaimportante sobre 0 respectivo funcionamenlo e manutenc;ao. ... :. .. •• • • CUIDADO: PARA REDUZIR 0 RISCO DE CHOQUE ELECTRICO, NAo RETIRE ATAMPA (NEM A PARTE TRASEIRA). NO INTERIOR DO TELEVISOR NAo EXISTEM PE<;AS QUE POSSAM SER REPARADAS PELOUTILlZAOOR. A ASSISTENCIA s6 PODE SER EFECTUADA POR TECNICOS QUALIFICAOOS. • As ranhuras e aberturas na eaixa e na parte posterior ou inferior pennitem a ventilac;ao necessaria. Para garantir 0 funcionamento correeto do aparelho e para 0 proteger do sobreaquecimento, nunca deve bloquear ou tapar estas ranhuras e aberturas. - Nao tape as ranhuras e aberturas com panos ou outros materiais. - Nao bloqueie as ranhuras e aberturas colocando 0 aparelho numa carna, sofa, tapete au outra superftcie semelhante. - Nao coloque este aparelho num espac;o fechado, como uma estante ou urn anmirio embutido, a menos que tenha ventilac;ao adequada. - Instale 0 produto, mantendo a distincia da parede especificada (consulte as informa,oes abaixo.) * Televisores DLP, Televisores do Tipo Direct View e Projectores _ 10 em * Produtos com visores de 32 polegadas ou maiores ~ 5 cm * Outros produtos - 4 em • Nao eoloque este aparelho perto ou por cima de urn radiador, sistema de aquecimento au num local em que esteja exposto aincidencia directa dos raios solares. • Nao coloque recipientes com agua em cima do aparelho (jarras etc.), porque pade provocar urn incendio ou choque electrico. • Nao exponha 0 aparelho achuva nem coloque em locais perto de agua (perto de uma banheira, lavatorio, lava-Ioi,a, tubo da maquina de lavar a loic;a, piscina ou numa cave com humidade). Se molhar acidentalmente 0 aparelho, desligue-o da ficha e contacte de imediato 0 revendedor autorizado. Retire sempre 0 cabo de alimenta,ao da tomada antes de limpar 0 produto. • Este aparelho tem pilhas. Oeite fora as pilhas adequadamente de acordo com as considerac;5es ambientais existentes no seu pais. Contacte as autoridades locais para obter infonnac;oes sobre a destruic;ao ou reciclagem de pilhas. • Nao sobrecarregue tomadas de parede, extensoes nem receptaculos, porque pode provocar urn incendio ou choque electrico. • Deve colocar os cabos de alimentar;ao de fonna a nao serem pisados nem entalados por objectos, tendo em especial atenc;ao os cabos ligados a fichas, a receptaculos e ao ponto de onde os cabos saem do aparelho. • Para proteger 0 aparelho de trovoadas, ou quando nao for utiliza-Io durante longos periodos de tempo, desligue 0 aparelho da tomada de parede e desligue a antena ou 0 sistema de televisao por cabo. Oeste modo, 0 aparelho nao sofre eventuais danos provocados por raios e descargas em cabos de alta tensao. • Antes de ligar 0 cabn de alimenta,ao de CAatomada do transformador de CC, certifique-se de que a designa,ao de tensao do tninsfonnador de CC corresponde aalimentar;ao electrica local. • Nunca introduza objectos metalicos nas aberturas do aparelho. Se 0 fizer, pode provocar choques electricos. • Para evitar choques electricos, nunca toque no interior do aparelho. Acaixa do aparelho s6 deve ser aberta por tecnicos qualificados. • Introduza 0 cabo de alimenta,ao completamente ate ao fim. Quando retirar 0 cabo de alimenta,ao, certifique-se de que 0 segura pela ficha quando puxar a mesma da tomada. Nao toque no cabo de alimenta,ao com as maos molhadas. • Se 0 aparelho nao funcionar nonnalmente - em particular, se 0 aparelho emitir midos ou cheiros invulgares - desligue 0 aparelho de imediato e contacte 0 revendedor autorizado ou centro de assistencia tecnica. • Certifique-se de que retira a ficha de alimentar;30 da tomada se 0 aparelho de televisao nao for utilizado ou se 0 utilizador nao estiver em casa durante urn periodo de tempo longo (especialmente quando crianr;as, idosos ou pessoas com deficiencias forem deixadas sozinhas em casa). - Poeira acumulada pode provocar urn choque electrico, uma fuga electrica ou urn incendio, fazendo com que 0 fio de alimentac;ao produza faiscas e aque,a ou deteriore 0 isolamento. • Contacte urn centro autorizado de assistencia tecnica quando instalar 0 produto em locais sujeitos a poeiras excessivas, locais sujeitos a temperaturas altas ou baixas, locais com muita humidade, locais onde se utilizem substancias quimicas e locais onde 0 monitor esteja a funcionar 24 horas por dia como em aeroportos, estac;oes de comboio, etc. Se nao 0 fizer, pode provocar serios danos no produto. • Utilize uma ficha e uma tomada devidamente Iigadas aterra. -Uma liga,ao de terra deficiente pode causar choque electrico ou danos no equipamento. (So equipamento de classe I.) • Deve puxar a ficha da tomada para desligar 0 aparelho da corrente, de fonna a deixar a ficha pronta a ser utilizada. • Nao deixe as crianps mexer no produto. • Guarde os acess6rios (bateria, etc.) num local seguro fora do alcance das crianc;as. • Nao instale 0 produto num local instavel, como uma prateleira inclinada, urn chao desnivelado ou urn local exposto avibrar;ao. • Nao deixe cair ou provoque qualquer embate no produto. Se 0 produto estiver danificado, desligue 0 cabo de alimentar;30 e contacte urn ccntro de assistencia. • Oesligue 0 cabo de alimentar;ao da tomada e utilize urn pano seco e macio para limpar 0 produto. Nao utilize quaisquer produtos quimicos como cera, benzina, alcool, diluentes, insecticida, ambientador, lubrificante ou detergente. Tal pode danificar 0 aspecto do produto ou eliminar a impressao do mesmo. • Nao deixe cair gotas ou salpicos em cima do aparelho. • Nao destrua as pilhas atraves de fogo. • Nao provoque curto-circuito, nern desfay8 ou sobreaquer;8 as pilhas. • Existe perigo de explosao se a pilha for substituida incorrectamente. Substitua-a apenas pelo mesmo tipo de pilha ou pOT G;) uma equivalente. • AVISO· PARA EVITAR 0 ALASTRAR DE UM INcENDlO, MANTENHA SEMPRE AS VELAS OU OUTRO TIPO DE CHAMA LONGE DESTE PRODUTO. . - Portugues- ·5·

ICES-003 Class A Notice - Avis NMB-003, Classe A This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la c1asse A est conforme a la norme NMB-003 du Canada. ICES-003 Class B Notice - Avis NMB-003, Classe B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe Best conforme ala norme NMB-003 du Canada. VCCI Class A Notice ;: (1)~iilt, !ftfR~JI~lI:<1it;~Ill'i'l3~m$tJ~iI(VCC!) (1)~lJl::~-:5 elf: lL'lIi t) tJk~'~ l el' ~ ~', CCC Class A notice - China Jlt1;JAmi'"JI,. i'Er.itIfJjtcp. ~i'"rfl, DJ~t4::'x/[!lX7C~El!,'fm. a~W~~T, DJ•••mpn~'fm*.i;JJ~DJff~m•• BSMI Class A Notice The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliance label. ~~j~m~ : i§~Ej3~~~T\~i11i"'b . :tE1i!f{1!.iV:Jl:ep~fflll;f , CJ~t~ffinX:~illjj~1i' ' :tEi§f!·!tii5ff ' ~ffl~~*.*~~~~~~~~m· ( E European Notice(Europe Only) Products with the CE marking comply with the EMC Directive(2004/108/EC) and the Low Voltage Directive(2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: - EN55022: Radio Frequency Interference - EN55024: Electromagnetic Immunity of Information Technology Equipment - EN61000-3-2: Power Line Harmonics - EN61000-3-3: Voltage Fluctuations - EN55013: Radio disturbance characteristics of broadcast receivers and associated equipments - EN55020: Electromagnetic immunity of broadcast receivers and associated equipments European Class A Warning (If the user manual declares the product as Class A, following statement applies.) This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. gj.!¥§ ~~{!7/7/AEP/7/ (KGG Glass A Notice) 01 71711'0 \:l-w:M~).££ ~;l:lllf~~~~ E! 71710I.2.Ll1:t0Wl:f Of.1'o AI§;l:fE 0I ~~ -";'£)3fAl7ll:Jf"-fOj, 7~2j£) ;l:1\!lOlIAi A~<5rE ~~ ~~.2.£ gJ-L1c~. 7~§ ~~{!7/7/ BEP/71 (KGG Glass B Notice) 0171711= 7~~ElE})££ ~Afll~~:3~~ E! 7171£).i -";'£ 7~0I1Ai AI§3fE~~...:t££31Ol, .'i'.EAI\!lOlIAi AI§~ *~tgLlq. Italian Homologation Notice Questo apparecchio e fabbricato in conformita al D.M.28.08.95 n.548 ed in particolare a quanto specificato nell Art.2, comma 1. Questo apparecchio e fabbricato nella U.E. in conformita al D.M.28.08.95 n.548 Art.2, comma 1 ed al D.M.26.03.92 Art.1 -. For products produced in countries except European Community Questo apparecchio e fabbricato in conformita al D.M.28.08.95 n.548 ed in particolare a quanto specificato nell Art.2, comma 1. For products produced in European Community Questo apparecchio e fabbricato nella U.E. in conformita al D.M.28.08.95 n.548 Art.2, comma 1 ed al D.M.26.03.92 Art.1 - 6- I) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. II) Only use attachments/accessories specified by the manufacturer. 12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped: WARNING: To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture. • Ventilation . . Do not place the apparatus in a rack or bookcase. Ensure that there is adequate ventilation and that you've followed that manufacturer's instructions for mounting and installation. • ENERGYSTAR qualified model only - Your Samsung TV is ENERGYSTAR qualified in its factory default settings. ._•• , :"., Change to certain features, settings and functionality in this TV can change the power ~; " consumption, possibly beyond the limits required for ENERGYSTAR qualification. - As an ENERGY STAR Partner, SamsulJ9 has determined that this product or product models meets the ENERGY STAR guidelines for energy efficiency. Contains Mercury, Dispose According to Local, State or Federal Laws -7 -

LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: (90 Days Parts and Labor for Commercial Use) Categories Parts Labor Size Service LCD TV I Year I Year 37" and Lager Carry-In or In Home 32" and Smaller Carry-In Projection Television Plasma Display I Year I Year All Carry-In or In Home DLP Projection TV I Year 25" and Smaller Carry-In or In Home Color Television (Excluding Picture Tube *) I Year Under 26" Carry-In Projector 2 Year 2 Year All Carry-In or In Home (Excluding Lamp **) LED Pocket Projector I Year I Year All Carry-In *2 Years Picture Tube (CRT) on Analog Color TV ** 180 Days after Purchasing and 600 Hours of Use Lamp on Projector This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. Certain products are eligible for In-home service at Samsung's discretion. To receive in-home service, the product must be unobstructed and accessible to service personnel. If during in-home service repair can not be completed, it may be necessary to remove, repair and return the product. If in-home service is unavailable, SAMSUNG may elect, at our option, to providefor transportation of our choice to and from a SAMSUNG authorized service center. Otherwise, and for 25" and smaller television (for LCD TV, 32" and smaller), transportation to and from the SAMSUNG authorized service center is the responsibility ofthe purchaser. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems; picture tube (CRT) brightness related to normal aging, or burned-in images. SAMSUNG does not warrant uninterrupted or error-free operation ofthe product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG at: Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 1-800-SAMSUNG (7267864) - www.samsung.com 1-800-749-0260: Only Projector

Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format fuD- motion video. The images displayed on them should primarily be in the standard 4:3 ratio fonnat and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% ofthe total television viewing per week. Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format fuD- motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen ifyour model offers this feature, and constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on non-expanded standard format television video and programming, should be limited to no more than 15% ofthe total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying any stationary images that exceed the above guidelines can cause uneven aging ofpicture tubes (CRTs) or Plasma Display Panels that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On television models that offer picture sizing features, use these controls to view the different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven CRT or Plasma Display Panels aging as a result of format selection and use, as weD as other burned-in images, is not covered by your Samsung limited warranty. 1111111111111111111111111111111111111111111 BP68-00263E-OO