Samsung YP-60 Manual 

1 Connect a USB cable to the USB port on the computer. 2 Connect the opposite end of the USB cable to the USB cable port on the right side of the yepp. ● If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly. 3 The USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed. 4 Upon installation of the USB driver "SAMSUNG YP-60” will appear in the [Start] →[Settings] →[Control Panel] → [System Properties] →[Device Manager]. ➤Before connecting the yepp to PC, make sure to install yepp Studio. Location of Controls Turning Power On and Off Playing Music Pausing Music 2 1 YP-60 Quick Guide ENC/NAVI. Button Move to Track/ Speed Search Button Volume Button MENU/ Loop Repeating Button Sports Function Button Play/Stop/Pause On/Off Button Display Hold Switch Reset Hole USB Cable Connection Port ENC Jack Earphone Jack Heart Rate Measurement Sensor ●Power On : Press and hold the button to turn on the power. ●Power Off : Press and hold the button to turn off the power. Press the button. ●Playback starts. Press the button to pause playback. ●While in Pause mode, briefly press again to resume playback. ●If the device won’t respond even after pressing the buttons, reboot it by pressing the Reset Hole with a pin. USB connect cable

2 Select the file you wish to download from the Play List Window or File List Window. ●If the Play List Window is empty, use the [Open Files] button on the main window or drag-and-drop the desired files from the File List Window to the Play List Window. 3 Drag-and-drop the selected files to the Music folder in the yepp window or click the [Transmit to yepp] button to move the files. NNoottee ●Refer to Help for more detailed information about using yepp Studio. ●When running the yepp Studio for the first time, input the serial number listed on the back of the yepp when the Product Number Registration Window appears. ●You cannot use yepp Studio while Fitness Manager is running. Viewing Help on yepp Studio 3 4 AH68-01563A (Rev 0.0) : [Open Files] button : [Transmit to yepp] button Run yepp Studio and press F1. ●Help will appear. Move the arrow to the top of yepp Studio and right click on the mouse. The following selection window will appear. ●Click on Help and the Help window will appear. N