Traxxas TQi 6507 Owner's Manual

Steering and Throttle End Points The TQi transmitter allows you to choose the limit of the servo’s travel range (or its “end point”) independently for left and right travel (on the steering channel) and throttle/brake travel (on the throttle channel). This allows you to fine-tune the servo settings to prevent binding caused by the servo moving steering or throttle linkages (in the case of a nitro model) farther than their mechanical limits. The end point adjustment settings you select will represent what you wish to be the servo’s maximum travel; the Steering Pe ...

Installing Batteries in the TQi Docking Base (Model #6507 Only) Your TQi transmitter uses 4 AA batteries. The battery compartment is located in the base of the transmitter. 1. Remove the battery compartment door by pressing the tab and sliding the door open. 2. Remove the battery holder. Install the batteries in the battery holder. Correct orientation is indicated in the battery holder. Make sure the battery holder is plugged into the transmitter. 3. Reinstall the battery door and snap it closed. 4. Turn on the transmitter and check the “ON” LED for a solid green lig ...

TRANSMITTER AND RECEIVER Steering Trim Steering Trim Multi-Function Knob Multi-Function Knob Throttle Trigger Throttle Trigger Throttle Neutral Adjust Throttle Neutral Adjust Steering Wheel Steering Wheel Receiver Power Switch Power Switch Battery Compartment Battery Compartment Docking Base Standard Base Set Button Set Button Menu Button Menu Button Red/Green Status LED Red/Green Status LED Link Button LED Sensor Expansion Port Models 6507 & 6508 only Models 6508 & 6509 Model 6507 Shift Switch (Channel 3) T-Lock Switch (Channel 4) Models 6507 & 6508 only #6507 - 4-chann ...

LED Color / Pattern Name Notes Solid green Normal Driving Mode Slow red (0.5 sec on / 0.5 sec off) Binding See page 8 for more information on binding. Flashing fast green (0.1 sec on / 0.15 sec off) Throttle Trim Seek Mode Turn the Multi-Function knob right or left until the LED stops flashing. See page 9 for more information. Flashing medium red (0.25 sec on / 0.25 sec off) Low Battery Alarm Put new batteries in the transmitter. See page 5 for more information. Flashing fast red (0.125 sec on / 0.125 sec off) Link Failure / Error Transmitter and receiver are no longer ...