Black Box TS030A Specifications

Specifications

Brand: Black Box
Category: Cable Tester
Model: TS030A (Specifications)
File Type: PDF
File Size: 0.39 Mb
Pages: 3

Read Online

Read the Black Box TS030A Specifications online using the built-in PDF viewer.

Text of the manual

Models available to

test Thin Ethernet, 10BASE-T Ethernet, UTP, Token Ring, and TP-PMD. Provides instant verification of cabling. Works as a standalone unit or works separately for checking cables. Unique slide method of attaching and detaching master unit from remote. Pro Quick Check includes adapter for testing Token Ring Type 1 or 3 cable. T he Ethernet Quick Check (TS030A) was designed specifically for the Ethernet user or technician. BNC and RJ-45 jacks enable continuity testing of the two most popular trans- mission media (10BASE-T and 10BASE2). The unique slide-lock mechanism joins master and remote sections for single- handed patch cord testing. You can separate the units for testing horizontal UTP runs as well as Thin Ethernet coaxial buses. The Multi Quick Check (TS031) provides instant verification of common UTP network wiring schemes following EIA/TIA 568A or B pairing. Ethernet 10BASE-T, Token Ring, and TP-PMD wiring can all be tested with this device. Easy-to-read sequencing LEDs verify good cabling, shorts, opens, and miswires. A unique slide-lock mechanism allows remote and Instantly identify properly wired cables. Key Features QUICK CHECKS (ETHERNET,MULTI,BNCCOAX,PRO) master to interlock for bench testing. With the BNC Coax Quick Check (TS032A), you can bench- test coaxial cabling with BNC connectors. This device tests for shorts and opens. Exclusive circuitry locks onto intermittent shorts (the most common failure in coaxial cabling). Interseries adapters can be used for testing coaxial cabling using connectors other than BNCs. The Pro Quick Check (TS038A) verifies cabling for Ethernet 10BASE-T, Token Ring, and TP- PMD. Sequencing LEDs on the Pro Quick Check verify continuity of 4- pair UTP/FTP cabling that conforms to EIA/TIA568 A or B pair designations. It tests for the presence of shield in Foil Twisted Pair (FTP) or Token Ring Shielded Twisted Pair (STP). It also has a convenient slide- lock mechanism for easy patch cord and premise cable testing. Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: [email protected] © 2005. All rights reserved. Black Box Corporation. 11/2/2005 #14481 Test thin Ethernet buses and patch cords, Ethernet UTP patch cords and horizontal runs, verify UTP wiring schemes, bench-test coaxial cable terminators, or verify UTP/FTP cabling with the model of the Quick Check that’s best for your application. Typical Application

The TS030A tests Thin Ethernet buses and patch cords.

The TS030A can test Ethernet UTP patch cords and horizontal runs. The TS031A provides instant verification of common UTP network wiring schemes following EIA/TIA 568A or B pairing. The TS032A enables bench testing of coaxial cabling terminators with BNC connectors. It tests for shorts and opens. The exclusive circuitry finds intermittent shorts, which are the most common failure in coaxial cabling. Remote Unit Remote Unit Patch Panel Patch Panel Horizontal Runs Horizontal Runs Wall Plate Wall Plate Unshielded Twisted Pairs Unshielded Twisted Pairs Master Unit Master Unit The TS038A’s sequencing LEDs verify continuity and wiring standard of patch cables or horizontal cable runs. Patch Panel Wall plate Master Unit Horizontal Runs Unshielded Twisted Pairs Remote Unit

TS030A: (2) BNC, (2) RJ-45;

TS031A: (2) RJ-45, TS032A: (2) BNC; TS038A: (2) BNC, (2) RJ-45 Indicators — TS030A: (6) LEDs for continuity; TS031A: (5) LEDs for continuity; TS032A: (3) LEDs; TS038A: (5) LEDs on master unit, (2) LEDs on remote unit Power — (1) 9-volt alkaline battery (included) Size — TS030A, TS031A: 2.8"W x 4.8"H x 1"D (7.1 x 12.2 x 2.5 cm); TS032A: 2.3"W x 2.8"H x 1"D (5.8 x 7.1 x 2.5 cm); TS038A: 2.3"W x 6"H x 1"D (5.8 x 15.2 x 2.5 cm) Weight — TS030A, TS031A: 0.5 lb. (0.2 kg); TS032A, TS038A: 0.4 lb. (0.2 kg) Specifications The Quick Checks feature diagnostic LEDs to let you know the status of your cable at a glance. • Sequencing LEDs verify cable continuity (TS030A, TS031A, and TS038A only). • Dual-colored LEDs identify shorted, open, or reversed pairs (TS032A only). The Quick Checks also offer the following features: • Convenient size with exclusive slide-lock mechanism. • Runs on one 9V alkaline battery (included). • Internal circuitry is fully protected against live cable damage. Technically Speaking Ordering Information ITEM CODE Ethernet Quick Check.................................................TS030A Multi Quick Check .......................................................TS031A BNC Coax Quick Check..............................................TS032A Pro Quick Check ..........................................................TS038A

Other Cable Tester Manuals