TRENDnet TE-R4 Product Information

enables you to join Ethernet cable segments to extend the length of the network trunk line. It can also be used to connect more computers to your network. Since there is a limit on the number of computers allowed on each cable segment, you can cut the segment into two, and then join them with an Ethernet Repeater. This will allow more computers to be added to each network segment. The TE-R4 Ethernet repeater auto-partitions each port. If a problem occurs to one of the segments, the TE-R4 will automatically isolate the segment, therefore will not effect the operations of the other segments. TE-R4 4-Port Ethernet Repeater (4 BNC + 4 AUI) Complies with IEEE 802.3 standards Support BNC and AUI connections Automatic partitioning LEDs for easy troubleshooting 10Mbps transfer rate 5 Year Warranty FEATURES PRODUCT INFORMATION TE-R2 2-Port Ethernet Repeater (2 BNC + 2 AUI) TE-R4 4-Port Ethernet Repeater (4 BNC +4 AUI) To Order Please Call: 1-888-326-6061 ORDERING INFORMATION ORDERING INFORMATION SPECIFICATIONS Standards: IEEE 802.3 10Base-2 and 10Base-5 Connectors: 4 BNC and 4 AUI Dimensions: 441mm x 123mm x 45mm • • • TRENDnet TRENDware, USA What's Next in Networking TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit ____________________ http://www.TRENDNET.com © Copyright TRENDware International, Inc. 2004. All Rights Reserved. TRENDware International, Inc. 3135 Kashiwa Street Torrance, CA. 90505. USA Tel: 310-891-1100 Fax: 310-891-1111 Web: Email: [email protected] www.TRENDNET.com