TRENDnet TK-204K Operation & User’s Manual

TRENDnet TRENDware, USA What's Next in Networking TK-204K/TK-404KR Version 11.30.04 2/4 port DVI-KVM Switch User’s Guide Guide de l'utilisateur du Switch audio DVI-KVM à 2/4 ports Diese Benutzeranleitung 2/4-facher DVI-KVM-Umschalter mit Audiofunktion Esta guía del usuari Conmutador con audio DVI-KVM de 2/4 puertos

English ...................................................................................................... Specifications ............................................................................................ Troubleshooting ........................................................................................ 1 1 2 3 7 4 8 1. Prepare for Installation ...................................................................... 2. Introduction ....................................................................................... 3. Installation ......................................................................................... 4. Operation ..........................................................................................

Switch. This guide will help you set up your KVM switch. Following the installation instructions should be quick and easy. If you run into problems, please refer to the Troubleshooting section of this guide. If you need further technical support, please visit www.TRENDNET.com or call technical support by phone. Verify Package Contents Please make sure you have everything in the box: The TK-204K/404KR 2/4-Port DVI KVM Switch with Audio is compatible with virtually all computers and operating systems. You only need to have one set LCD monitor, PS/2 keyboard, PS/2 mouse, microphone and speakers. 1 1. Prepare for Installation English UG English TK-204K or 404KR User’s Guide Power Adapater (DC 9V 1A) 2 or 4 DVI KVM cables with audio TRENDnet TRENDware, USA What's Next in Networking TK-204K/TK-404KR Version 11.30.04 2/4 port DVI-KVM Switch User’s Guide Guide de l'utilisateur du Switch audio DVI-KVM à 2/4 ports Diese Benutzeranleitung 2/4-facher DVI-KVM-Umschalter mit Audiofunktion Esta guía del usuari Conmutador con audio DVI-KVM de 2/4 puertos

multimedia-enabled computers. The TK-204K/404KR allows you to operate 2/4 computers using only one monitor, PS/2 keyboard, PS/2 mouse, set of speakers, and microphone. Hardware Support The TK-204K/404KR DVI-KVM Switch is compatible with the PC platform. The TK-204K/404KR is also compatible with virtually all PS/2 mice, including Microsoft Intellimouse, IntelliMouse Explorer, Microsoft Optical Mouse and Logitech Net Mouse. Software Support The TK-204K/404KR DVI-KVM Switch does not require any drivers or software. It is compatible with the following operating systems: Windows 98SE/ME/2000/XP, Linux, and others. Plug-N-Play The TK-204K/404KR DVI-KVM Switch connects to your computers via the PS/2 interface for convenient Plug-and-Play functionality. Front-panel buttons and Hot-Key Commands There are two methods to control your KVM Switch for PC selection. You can use the front-panel push buttons or the Hot-Key commands to switch between your computers quickly and easily. With full-sized features crammed into a space-conserving size, TRENDnet's TK-204K/404KR KVM Switch is perfect for use at home or in the office. English

2. Connect the Power Adapter to your TK-204K/404KR DVI-KVM switch. 3. Connect the shared keyboard, monitor, mouse, speakers and microphone to their respective ports on the KVM switch. The TK-204K/404KR’s inputs are color-coded for your convenience. 4. Connect each set of integrated KVM cables to each computer's video, PS/2 keyboard, PS/2 mouse, speakers, and microphone connectors. 5. Turn on both computers. After the computers boot up completely, you may begin operating the KVM switch. Installation is now complete. English 4 4 2 3

commands. Hot-Key Commands A keyboard hot-key command consists of three keystrokes: Please see the next page for more detail. Hot-Key command = ScrLk + ScrLk + Command key(s) After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. If you do not press a key within 2 seconds, the switch will exit hot-key mode. For complete Hot-Key commands, please see reverse page. 4. Operation English

Select PC Channel (Joint-select PC port/hub port control/ audio&mic, if binding is enabled) Select Audio&Mic Channel (Joint-select PC port & audio/mic, if binding is enabled) Previous PC channel Bind PC & Audio/Mic Switching [Default] Unbind PC & Audio/Mic Switching Autoscan Beep Sound On/Off Next lower PC channel Autoscan Autoscan with Programmable Delay Time Reset Console Mouse Next higher PC channel Stop Autoscan ScrLk ScrLk X + + (x is a top-row number key) x = 1~2 / x = 1~4 for PC channel number ScrLk ScrLk + + (Arrow up) ScrLk ScrLk + + (Arrow down) ScrLk ScrLk + + (Back Space) ScrLk ScrLk + + B ScrLk ScrLk + + S ScrLk ScrLk + + End Press any key on keyboard Press the corresponding button to select the active PC channel Select the active Audio&Mic channel (Joint-select PC & audio&mic channel, if binding is enabled) Select the active PC channel (Joint-select PC port /audio& mic , if binding is enabled) Toggle between the previous channel and current channel Enable the binding of PC port and audio&mic switching. (Once this feature is enabled, any pc and/or audio&mic switching is bound together) [Factory Default] Disable the binding of PC port and audio&mic switching Toggle on/off the beep sound for switching confirmation while autoscanning Select the next lower connected channel Autoscan through every connected channel for quick screen browsing of each channel (default delay time = 5 sec ) Autoscan with a user-defined delay time within a range of 5 ~ 100 seconds Reset mouse on the console side Select the next higher connected channel Terminate Autoscan. Press the push button to switch to the next channel English ScrLk ScrLk + + + S X x = 0~9 1>10” ; 2>20” ; 3>30” ; 4>40” ; 5>50” 6>60” ; 7>70” ; 8 >80” ; 9>90” ; 0>100” Fy = F5~F6/Fx=F5~F8 (Fy is a function key) y = 1~2 / y = 1~4 for audio/mic channel number ScrLk ScrLk + + Fy ScrLk ScrLk + + Q ScrLk ScrLk + + W - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

keyboard, hotkey feature is disabled. 2. Note that (x) denotes a number key for the selected port number (x = 1 or 2). Currently only the top row number keys are available for hotkeys. Do not use the number pad for hotkey commands. 3. When binding the PC ports, port binding is enabled by the hotkey sequence: ScrLk + ScrLk + Q. All PC ports are bound together. To remove this binding, use the hotkey sequence: ScrLk + ScrLk + W. 4. Normally, you should have no problems with mouse hot-plugging on a Plug- and-Play OS. However, a non-PnP OS only performs hardware detection while booting up - that is why the mouse will lock sometimes. Mouse Troubleshooting on a non-PnP OS (Linux, Windows NT 4.0): If you experience mouse lock when hot-plugging mouse on a non-PnP OS such as Linux or WinNT 4.0, just hit one of the following hotkey commands for mouse reset according to your mouse configuration on the non-PnP OS: Hot-Key convention: The hotkey notation for example (ScrLk + ScrLk + X.) denotes that you should hit the individual key consecutively one at a time, not simultaneously.

KVM Cable: 2 sets of integrated 1.2M (ft) DVI-KVM Cables with Audio. (TK-204K) 4 sets of integrated 1.8 M (5.9ft) DVI-KVM Cables with Audio. (TK-404KR) Console Port Connectors: 1 x PS/2 keyboard 6-pin mini din female 1 x PS/2 mouse 6-pin mini din female 1 x DVI-I Single Link female 1 x 3.5mm audio jack 1 x 3.5mm microphone jack PC Port Connectors: 2 x PS/2 keyboard 6-pin mini din female (TK-204K) 2 x PS/2 mouse 6-pin mini din female (TK-204K) 2 x DVI-I Single Link female (TK-204K) 4 x PS/2 keyboard 6-pin mini din female (TK-404KR) 4 x PS/2 mouse 6-pin mini din female (TK-404KR) 4 x DVI-I Single Link female (TK-404KR) Port Selection: Digital Display Resolution: Push Button and Hot-Key Commands 1600 x 1200 Auto-Scan Intervals: 5 seconds Power Type: PS/2 Optional 9V DC, 1A Adapter Dimensions: 140 x 86 x 45 mm (5.51 x 3.38 x 1.77inches)(TK-204K) 220 x 100 x 45mm (8.66 x 3.94 x 1.77 inches)(TK-404KR) Weight: Approx. 520g (1.8 Oz) (TK-204K) Approx. 1000g (35.2 Oz) (TK-404KR) 0º ~ 40ºC (32º ~104º F) Operating Temperature: -20º ~ 60ºC (-4º ~ 140º F) Storage Temperature: 0%~90%, Non-Condensing Humidity: FCC and CE Certifications:

7:00AM ~ 6:00PM, Monday through Friday Pacific Standard Time (except holidays) Contact Technical Support Telephone: +1-310-626-6252 Fax: +1-310-626-6267 Website: www.TRENDNET.com E-mail: [email protected] Troubleshooting Q1: A1: Q2: A2: Q3: A3: Q4: A4: I have the KVM switch connected properly but my keyboard and mouse doesn't function. Why? Make sure that the following connections are properly made: 1. Connection of PS/2 mouse and PS/2 keyboard to the DVI-KVM switch. 2. Connection of DVI-KVM cables to the DVI-KVM switch. 3. Connection of DVI-KVM cables to the PCs. Can I connect and disconnect the PS/2 cables while the computers are turned on? Yes, you can connect or disconnect the PS/2 cables while the computers are turned on because the PS/2 interface is Plug-and-Play. Will the KVM switch restore the keyboard settings when switching between computers? Yes, the KVM switch will restore the custom keyboard settings for each computer. (Cap lock, Num key, etc.) How do I switch from one computer to another with the KVM switch? The TK-204K/TK-404KR supports Push button and Hot-Key commands, so you can switch PCs by pressing the Push button on the KVM switch or by using the Hot-Key commands listed on the reverse side of this page. If you have further questions, please contact Trendware's Technical Support Department. Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.

TRENDnet TRENDware, USA What's Next in Networking @ Product Warranty Registration Please take a moment to register your product online. Go to TRENDware’s website at http://www.TRENDNET.com TRENDware International, Inc. 3135 Kashiwa Street Torrance, CA 90505 http://www.TRENDNET.com