Samsung Techwin Operation & User’s Manual
Text of the manual
Configure, fix and wire
Basic speed dome operation
Programming the speed dome
Using the speed dome features
Parts and dimensions
Wiring schematic
Specifications
Installer notes
1
2
3
6
7
13
14
15
16
17
·Installation should be carried out only by qualified personnel and in accordance with
any wiring regulations in force at the time.
·The speed dome is heavy and could cause injury if not correctly mounted in
accordance with these instructions. Use only the fittings supplied with the speed
dome and ensure that all lanyard safety cables
Up to 127 sets of positional and zoom level information can be stored as
presets. These can be called manually by the operator, automatically by an
alarm input, or grouped to form a sequence of actions to run automatically.
Each preset can also be programmed with the following:
Pattern tours
Any dome movement can be recorded - and subs
Configure, fix and wire
1. Remove the foam packing pieces
3. Reassemble the speed dome
Protocol & Baud rate DIP switch table
Speed dome ID DIP switch table
2. Change protocol, baud rate and ID if required
Before proceeding with installation, the speed dome foam packing
pieces must be removed. Remove the outer dome cover with the tool
supplied and carefully
