Tripp Lite B132-004 Owner's Manual

Extender/Splitter Local Unit Model: B132-004 Tripp Lite World Headquarters 1111 W. 35th Street, Chicago, IL 60609 USA (773) 869-1234 • www.tripplite.com Note: Follow these instructions to ensure proper operation and prevent damage to this device and its connected equipment. Copyright © 2009 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners. Español 78 Français 15 15 Warranty Registration: register online today for a chance to win a FREE Tripp Lite product—www.tripplite.com/warranty

• 1 ft. VGA Cable • 12.6V, 3A Power Supply • Owner’s Manual Signal Type................... ��VGA, SVGA, XGA, UXGA and WUXGA (up to 1920 x 1440) Video Amplifier Bandth ��350 Mbps Input DDC Signal �����������0.7 Volts p-p (TTL) Signal Noise Ratio ����������90dB Ports ��������������������������������(x2) HD15 Female, (x4) RJ45 Female Power Supply ������������������Input: 100-240V, 50/60 Hz, 1A; Output: 12.6V, 3A Dimensions (Inches) �������1.1 (H) x 5 (W) x 4 (D) Weight (lbs) ���������������������0.86 Note: Specifications are subject to change without notice. Mass and dimensions are approximate; please take the products as a standard. Product Features • Transmits and extends a single VGA signal to up to 4 monitors using inexpensive Cat5e/6 cable; up to 500 ft (1024 x 768, 3db) from the source • Expand the number of connected monitors by chaining up to 3 B132-004 Extender/Splitters together • Features a HD15 port for local monitor connection • Compatible with VGA, SVGA, XGA, SXGA and UXGA computer resolutions • Supports video resolution up to 1920 x 1440 • Compatible with all operating systems • B132-100 VGA over Cat5 Extender/Splitter Remote Unit • B132-100-WP VGA over Cat5 Extender/Splitter Wallplate • B132-004-RB VGA over Cat5 Extender/Splitter Rackmount Bracket • P502-Series Monitor Cables with RGB Coax, HD15 Male/Male • N002- or N001-Series Cat5e Patch Cables Optional Accessories

2 Local Video-Out Port: HD15 Female. 3 Power LED: LED illuminates when the unit is plugged in and receiving power. 4 Power Jack: 12.6V, 3A power supply connects to the unit here. 5 Output Ports: (x4) RJ45 Female; connect Cat5e/6 cable between each port and a B132-100 VGA Over Cat5 Extender/Splitter Remote Unit (sold separately) or B132-100-WP VGA Over Cat5 Extender/Splitter Wallplate (sold separately). 3 4 5 1 2

through ceilings/walls. 1 Connect your computer to the Source port on the B132-004 using a VGA cable. 2 (Optional) Connect a local monitor to the Local port on the B132-004 using a VGA cable. 3 Connect the power supply to the B132-004 and plug it into an appropriate power source. 4 Connect the B132-004 Local Unit to a B132-100 Remote Unit (sold separately) or B132-100-WP Wallplate (sold separately) using Cat5e/6 cable. One B132-100 or B132-100-WP is required for each Output port on the B132-004 Local Unit. Note: Remote connection methods will vary. (See the B132-100 or B132-100-WP Owner’s Manual for details.) 5 Follow the instructions in the Owner’s Manual that comes with your B132-100 Remote Unit or B132-100-WP Wallplate to complete the installation. B132-100 B132-004 B132-100-WP

local) by cascading B132-004’s together. Follow the instructions below to set up a Cascaded Installation. Note: A B132-004-RB VGA Over Cat5 Extender/ Splitter Rackmount Bracket (sold separately) is recommended for rackmount installations. The B132-004-RB is designed to comfortably fit 3 of the B132- 004 Local Units in 1U of rack space. If you are using a B132-004-RB, attach all of the B132-004 Local Units to the bracket before continuing. 1 Connect your computer to the Source port on the first B132-004 in the installation using a VGA cable. 2 Using the 1 ft VGA cable provided with the B132-004, connect the VGA Output port on the first B132-004 in the installation to the VGA Input port on the second B132-004 in the installation. Repeat this step if you are connecting a third B132-004 Local Unit. 3 Connect the power supplies to all B132-004s in the installation and plug them into an appropriate power source. Source PC Local PC (Optional)

moisture. • Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fire. • Use only recommended accessories to avoid fire, shock or other hazards. • Unplug this product before cleaning. Use a damp cloth for cleaning. Do not use cleaning fluids or aerosols, which could enter the unit and cause damage, fire or electrical shock. • Do not attempt to service the unit. Instead, disconnect it and contact your Authorized Reseller or technician. • Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life sup- port equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide. Cascaded Installation 4 Connect the B132-004 Local Units to the desired number of B132- 100 Remote Units (sold separately) or B132-100-WP Wallplates (sold separately) using Cat5e/6 cable. One B132-100 or B132-100-WP is required for each Output port on the B132-004 Local Units. Note: Remote connection methods will vary. (See the B132-100 or B132-100- WP Owner’s Manual for details.) 5 Follow the instructions in the Owner’s Manual that comes with your B132-100 Remote Unit or B132-100-WP Wallplate to complete the installation.

automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details. 1-YEAR LIMITED WARRANTY Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 1 year from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; USA. Seller will pay return shipping charges. Call Tripp Lite Customer Service at (773) 869-1234 before sending any equipment back for repair. THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction). Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; USA Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice. Made in China. Tripp Lite World Headquarters 1111 W. 35th Street, Chicago, IL 60609 USA (773) 869-1234 • www.tripplite.com 200901106 93-2865