Freecom BLU-RAY COMBO PRO Operation & User’s Manual

Chapter 2: Get to know your Network Drive Pro This chapter describes the lights and mechanical layout of the Network Drive Pro. 2.1 Network Drive Pro connectors, LEDs and buttons Front of the Network Drive Pro The front consists of: 1. On/off switch* 2. Backup switch: immediate start of selected backup tasks 3. LED with drive space capacity indicator 4. USB Unplug switch (2x) 5. USB Host Port Type A (2 x) * Press up to 5 seconds to switch off device. 3. 1. 2. 5. 4. 4. ...

4.1.1 Configure basic settings of your Freecom Network Drive Pro In this screen, you can set an IP address, subnet mask, device name and workgroup name for your Network Drive Pro. With this information, it is easy to locate your Network Drive Pro in the network without the wizard. To change the settings, you have to first enter the administrator password. 4.1.2 Accessing your Network Drive Pro web interface When you click this menu item, the web interface for your Network Drive Pro opens in your default browser. ...

3.8.3 Version Open Information -> Version. This window displays information on the operating system and firmware contained on Network Drive Pro. 3.8.4 Devices Open Information -> Devices. This dialog box displays a list of attached devices. Click 'Refresh' in your browser if one of the connected devices is not displayed on the screen. ...

4.1.1 Configure basic settings of your Freecom Network Drive Pro In this screen, you can set an IP address, subnet mask, device name and workgroup name for your Network Drive Pro. With this information, it is easy to locate your Network Drive Pro in the network without the wizard. To change the settings, you have to first enter the administrator password. 4.1.2 Accessing your Network Drive Pro web interface When you click this menu item, the web interface for your Network Drive Pro opens in your default browser. ...

3.6 Configuration It is possible to save and restore all Network Drive Pro user settings. Note: Please do not save your user settings directly on the Network Drive Pro. 3.6.1 Save configuration Open Configuration -> Save Configuration. In this window, you can save the current configuration file on your computer. After pressing the button, you are asked where you want to save the back-up copy of the configuration file. Select a location and click 'Save Configuration'. ...

Note: You can also use the Freecom Network Storage Assistant for quick installation of your printer in Windows. For detailed instructions on usingthe FNSA, please refer to chapter 4, 'The Freecom Network Storage Assistant'. Mac OS X: Installing a USB printer To install a USB printer, connect the printer to one of the USB host ports on the Network Drive Pro. Check to make sure the Network Drive Pro is on. Then turn the printer on. 1. Connect a USB printer to the Network Drive Pro. 2. Open the Network Drive Pro Configuration page and check whether the pr ...

CE EN 55 022 Declaration of Conformance. This is to certify that the Freecom Network Drive Pro is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class B (CISPR 22). FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including i ...

MacOS X With Macintosh OS 7 and higher, TCP/IP comes preinstalled on the Macintosh. To use DHCP, you need to configure TCP/IP on each Macintosh in the network. 1. Open 'System Preferences' and then 'Network'. 2. If it has not already been selected, click 'Built-in Ethernet' from the configuration list. 3. If this has not been selected, click 'Use DHCP' on the TCP/IP tab. 4. Hit 'Save'. Check the TCP/IP properties (Macintosh) Once your Macintosh has been configured and restarted, you can check the TCP/IP configuration by once again opening TCP/IP System Prefe ...