Tripp Lite B021-000-19 Owner's Manual

with 19” Display (for KVM Switch or Server) Model #: B021-000-19 Tripp Lite World Headquarters 1111 West 35th Street, Chicago, IL 60609 USA (773) 869-1234, www.tripplite.com Note: Follow these instructions and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices. Copyright © 2007 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners. The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice. WARRANTY REGISTRATION: register online today for a chance to win a FREE Tripp Lite product— www.tripplite.com/warranty

Introduction ...................................................................................................................................... 3 Front View .................................................................................................................................... 3 Rear View ...................................................................................................................................... 3 Installation ......................................................................................................................................4-7 LCD OSD (On-Screen Display) Configuration ........................................................................ 5-6 Rackmounting ................................................................................................................................ 7 Specifications ...................................................................................................................................... 8 Warranty ............................................................................................................................................ 8 Warranty Registration ........................................................................................................................8 • B021-000-19 1U Rackmount Console • Mounting Hardware • USB Cable Kit with PS/2 Adapter • AC Power Cord • Owner’s Manual Package Content Table of Contents • Rackmount console (19” LCD display, keyboard, touch pad) in an integrated 1U rackmountable housing • Sleep mode when the monitor cover is closed • Supports resolutions of up to 1024 x 768 pixels • Rackmountable in 19" system rack (1U) • Can be used with any device that includes PS/2 or USB console port connectors Overview The B021-000-19 1U Rackmount Console features an integrated LCD panel, full keyboard and touch pad in a 1U rackmountable housing. These consoles are designed for use with a server or a KVM switch with PS/2 or USB console port connectors. Features Include

1. Hide-Away Handle: Pull to slide the module out; push to slide the module in. 2. LCD Monitor: After sliding the module out, flip up the cover to access the LCD monitor, keyboard and touch pad. 3. Keyboard 4. Wrist Rests 5. Slide Release: Mechanism to lock the drawer closed when the console is not in use. Prevents it from accidentally sliding open. To slide the the console out, you must first release it by moving this tab sideways. 6. Rackmounting Brackets: There are rackmounting brackets to secure the chassis to a system rack located at each corner of the unit. See p. 6 for rackmounting details. 7. 3-Button Touch Pad 8. LCD Display Controls: The LCD OSD controls located here control the position and picture settings of the LCD display. See the LCD OSD Configuration on p. 5-6 for details. Also includes a power LED to indicate the status of the LCD panel. 9. Railway Release Tabs: When the drawer is completely pulled out to the end, the railway system will lock. Push these release tabs on both sides to release the drawer so that it can be pushed back in. Introduction Front View Rear View 1. Console Port Section: The cable kit to connect the console to your server or KVM switch plugs in here. 2. Power Socket: The power code plugs in here from the AC power source. 3. Power Switch: On/Off rocker switch. 3. Auto-Detect (Internal): Automatically detects a PS/2 or USB connection. 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 1 2 3 4 1 2 3 9 4

1. Plug the cable kit (provided with this unit) into the port on the B021-000-19. 2. Plug the cable keyboard, monitor and mouse connectors on the other end of the USB cable kit into their corresponding ports on the server or KVM switch. The cable kit includes a PS/2 adapter to accommodate both USB and PS/2 connections. 3. Plug the power cord into the B021-000-19’s power socket and into an AC power source. 4. Power up your server or KVM installation. 5. Turn on the power to the B021-000-19. Note: The example diagram shows the B021-000-19 connecting to a B022-016 KVM switch. If you are connecting to a different model, the console port connectors may be in a different location. Installation 1 2 3 4 5 1 2 3

Left Right Menu/Selection Power Power LED Up Down Exit OSD Menu Controls Function Power "ON/OFF" LED Green = OSD menu "ON" Orange = OSD menu "OFF" (power saving mode) Press this to turn the monitor on or off. Press this to bring up the configuration menu. Also, when scrolling through the menu, press this to select an option. Press these to scroll through the menu options. Press these to increase or decrease the configuration settings. Press this to return to the previous menu screen. Also, press this to perform an auto adjust when not in the menu configuration.