Samsung LA15S51BP Owner's Instructions Manual

please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PC DISPLAY TELETEXT This device is a Class B digital apparatus. Register your product at www.samsung.com/global/register Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE SOUTH AFRICA TAIWAN THAILAND U.A.E VIETNAM Customer Care Center 1300 362 603 800-810-5858, 010- 6475 1880 2862 6001 3030 8282, 1600 1100 11 0800-112-8888 0120-327-527 1800-88-9999 1800-10-SAMSUNG (7267864) 1800-SAMSUNG (7267864) 0860 7267864 (SAMSUNG) 0800-329-999 1800-29-3232, 02-689-3232 800SAMSUNG (7267864) 1 800 588 889 Web Site www.samsung.com/au www.samsung.com.cn www.samsung.com/hk www.samsung.com/in www.samsung.com/id www.samsung.com/jp www.samsung.com/my www.samsung.com/ph www.samsung.com/sg www.samsung.com/za www.samsung.com/tw www.samsung.com/th www.samsung.com/mea www.samsung.com/vn BN68-01013B-00 BN68-01013B-X0Cover.qxd 2/16/06 3:33 AM Page 1

Gambar diam dapat menyebabkan kerusakan permanen pada layar TV. • Jangan menampilkan gambar diam pada panel LCD lebih dari 2 jam karena dapat menyebabkan penyimpanan gambar layar. Penyimpanan gambar ini juga dikenal sebagai "layar terbakar". Untuk menghindari penyimpanan gambar tersebut, kurangi tingkat kecerahan dan kontras pada layar apabila menampilkan gambar diam. • Menyaksikan TV LCD pada format 4:3 dalam waktu lama dapat meninggalkan bekas garis tepi di bagian kiri,kanan dan tengah layar yang disebabkan oleh perbedaan pancaran cahaya pada layar. Memutar DVD atau konsol game dapat menyebabkan efek yang serupa pada layar. Kerusakan yang disebabkan oleh efek di atas tidak dicakup dalam Garansi. • Menampilkan gambar diam dari Video game dan PC lebih lama dari jangka waktu tertentu dapat menghasilkan jejak potongan gambar. Untuk mencegah efek ini,kurangi ‘brightness ('terang)'dan ‘contrast (kontras)' apabila menampilkan gambar diam.

List of Parts .............................................................. 2 How to Adjust the Stand .......................................... 2 How to Adjust the Angle of the TV ...................... 3 Installing the Wall Mount Kit .................................... 3 Installing VESA compliant mounting devices .......... 3 Viewing the Control Panel ........................................ 4 Viewing the Connection Panel.................................. 5 Viewing the Remote Control .................................... 6 Installing Batteries in the Remote Control................ 6 Switching On and Off................................................ 7 Placing Your Television in Standby Mode ................ 7 Plug & Play .............................................................. 7 SETTING THE CHANNELS Storing Channels Automatically................................ 8 Storing Channels Manually ...................................... 9 Editing the Channels ................................................10 Sorting the Stored Channels ....................................10 Assigning Channels Names .................................... 11 Fine Tuning Channel Reception .............................. 11 SETTING THE PICTURE Changing the Picture Standard ................................12 Adjusting the Custom Picture ..................................12 Changing the Colour Tone........................................13 SETTING THE SOUND Changing the Sound Standard ............................13 Adjusting the Volume Automatically ....................13 SETTING THE TIME Setting and Displaying the Current Time..............14 Setting the Sleep Timer........................................14 Switching the Television On and Off Automatically......................................15 SETTING THE OTHERS Choosing Your Language ....................................15 Setting the Blue Screen Mode..............................16 Selecting the Source ............................................16 Editing the Input Source Names ..........................16 USING THE TELETEXT FEATURE Teletext Decoder ..................................................17 Displaying the Teletext Information ......................17 Selecting a Specific Teletext Page ......................18 Using Fastext to Select a Teletext Page ..............18 Storing Teletext Pages..........................................18 SETTING THE PC Setting up Your PC Software (Based on Windows XP) ......................................19 Display Modes......................................................19 Setting the PC ......................................................20 RECOMMENDATIONS FOR USE Troubleshooting: Before Contacting Service Personnel ..................21 Technical and Environmental Specifications ......21 Symbol Press Important Note One-Touch Button

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Remote Control & Batteries (AAA x 2) Power Cord Wall Mount kit Owner’s Instructions  Warranty card  Service Network Card  Safety Guide  Registration Cards How to Adjust the Stand 1. Place the front of the TV onto a soft cloth or cushion on a table as in Figure (1). - Align the TV bottom along the table edge. 2. Press on the center of the TV back. Adjust the stand as in Figure (2) while pressing the “PUSH” button on the back of the stand. 3. Place the TV on the table so that the TV sits safely. When you adjust the stand, press the “PUSH" button on the back of the stand. Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations) 17” 15”, 20” (1) (2) PUSH button The product colour and shape may vary depending on the model.

1. Figure (1) shows the adjustment angle (0°~13°) when you use the LCD on its stand . Excessive tilting can turn the LCD TV over which may cause damage. 2. Figure (2) shows the adjustment angle (13°~80°) when you convert the LCD from stand-based use to wall-mount. 3. Figure (3) shows the adjustment angle (0°~10°) when you mount the LCD TV to a wall. You will hear a “Click ” sound when changing the angle from 1 to 2 or 3 to 2. When you adjust the stand, press the “PUSH" button on the back of the stand. (1) Angle adjustment when using the TV on its stand. (2) Angle adjustment when converting from Stand to Wall mount (1 3, 3 1) (3) Angle adjustment when LCD TV is wall-mounted Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Installing the Wall Mount Kit The product colour and shape may vary depending on the model. The product colour and shape may vary depending on the model. Installing VESA compliant mounting devices (2) (3) When you adjust the stand, press the “PUSH" button on the back of the stand. 1. Place the TV faced down on a soft cloth or cushion on a table. 2. Adjust the stand, pressing the "PUSH" button on the back of the stand. 3. Align the mounting interface pad (not supplied) with the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases (not supplied). Mounting pad (sold separately) PUSH button

SOURCE Toggles between all the available input sources (TV - AV - S-Video - Component - PC). In the on-screen menu, use this button as you use the ENTER button on the remote control. MENU Press to see an on-screen menu of your TV’s features. Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the  and  buttons on the remote control Press to change channels. In the on-screen menu, use the buttons as you use the and buttons on the remote control. (Without the Remote Control, You can turn on the TV by using the Channel buttons.) POWER Press to turn the TV on and off. Speakers (Headphone Jack) Connect a set of external headphones to this jack for private listening. Remote Control Sensor Aim the remote control towards this spot on the TV. Power Indicator Blinks and turns off when the power is on and lights up in stand-by mode. The product colour and shape may vary depending on the model. LA15S51BP LA20S51BP LS17M24CP

Power Input Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. The product colour and shape may vary depending on the model. Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network Connecting External A/V Devices - Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables (optional) to “L - AUDIO - R” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. Connecting Component Devices (DTV/DVD) - Connect component video cables (optional) to component connector (“Y”, “PB”, “PR”) on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD. - If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (“Y”, “PB”, “PR”) on your set. - The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. - Connect RCA audio cables (optional) to “L - AUDIO - R” on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD. Connecting Computer - Connect the D- Sub cable (optional) to “PC IN” on the rear of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable (optional) to “PC AUDIO IN” on the rear of your set and the other end to “Audio Out” of the sound card on your computer. Kensington Lock - The Kensington lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The place of the Kensington Lock may be different depending on its model.

2. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.) If the remote control doesn’t work, check the following: 1. Is the TV power on? 2. Are the plus and minus ends of the batteries reversed? 3. Are the batteries drained? 4. Is there a power outage, or is the power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby? Installing Batteries in the Remote Control English-6 Television Standby button Number buttons for direct channel access One/Two-digit channel selection : Volume increase : Volume decrease Temporary sound switch-off Selects the TV mode directly Displays the main on-screen menu Sound effect selection Previous channel P : Next channel P : Previous channel Available source selection Use to see information on the current broadcast Exit the on-screen menu Control the cursor in the menu Automatic Power-off Picture effect selection Sound mode selection Teletext Functions Teletext hold Exit from the teletext display Teletext index Teletext sub page Teletext display/mix both teletext information and the normal broadcast Fastext topic selection P : Teletext next page P : Teletext previous page Teletext mode selection (LIST/FLOF) Teletext reveal Teletext store Teletext size selection The performance of the remote control may be affected by bright light. For details, refer to further instructions. Viewing the Remote Control

1. Plug the mains lead into an appropriate socket. The standby indicator lights up on the lower-right panel or right side of the panel. 2. Press the POWER button on the lower-right panel. The programme that you were watching last is reselected automatically. 3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control (or press button on the lower-right panel or right side of the panel.) When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed. 4. To switch your set off, press the POWER button again. Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1. Press the POWER button on the remote control. The screen is turned off and a standby indicator appears on the lower-right panel. 2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel up/down ( / ) button again. Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. Switching On and Off Placing Your Television in Standby Mode When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. 1. Press the POWER button on the remote control. The message “Start Plug & Play” is displayed with “OK” selected. 2. Select the appropriate language by pressing the  or  button. Press the ENTER button to confirm your choice. 3. The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER button. Please check that the antenna cable is connected correctly. 4. Select the appropriate country by pressing the  or  button. Press the ENTER button to confirm your choice. Plug & Play English-7

 Area: Select your country.  Auto Store: Automatically scans for and stores channels available in the local area.  Clock Set: Sets the current time for the TV clock. If you want to reset this feature... 1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button. 2. Press the  or  button to select “Plug & Play”, then press the ENTER button. 3. The message to “Start Plug & Play” is displayed. 5. The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER button. The channel search will start and end automatically. After all the available channels are stored, the “Clock Set” menu appears. Press the ENTER button at any time to interrupt the memorization process. 6. Press the ENTER button. Select the “Hour” or “Minute” by pressing the  or  button. Set the “Hour” or “Minute” by pressing the  or  button. You can also set the hour and minute by pressing the number buttons on the remote control. 7. Press the ENTER button to confirm your setting. You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button. 2. Press the ENTER button to select “Area”. 3. Select the appropriate country by pressing the  or  button. Press the ENTER button to confirm your choice. 4. Press the  or  button to select “Auto Store”, then press the ENTER button. 5. Press the ENTER button. The TV will begin memorizing all of the available channels. Press the ENTER button at any time to interrupt the memorization process and return to the “Channel” menu. 6. After all the available channels are stored, the “Sort” menu appears. Storing Channels Automatically

networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button. 2. Press the  or  button to select “Manual Store”, then press the ENTER button. 3. Press the ENTER button to select “Programme”. 4. To assign a programme number to a channel, find the correct number by pressing the  or  button and then press the ENTER button. You can also set a programme number by pressing number buttons on the remote control. 5. Press the  or  button to select “Colour System”, then press the ENTER button. 6. Select the colour standard required by pressing the  or  button, then press the ENTER button. 7. Press the  or  button to select “Sound System”, then press the ENTER button. 8. Select the sound standard required by pressing the  or  button, then press the ENTER button. If there is an abnormal sound or no sound, re-select the sound system required. 9. If you know the number of the channel to be stored, press the  or  button to select “Channel”. Press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel. Select the required number by pressing the  or  button and then press the ENTER button. Channel mode: P (Programme mode) C (Air channel mode) S (Cable channel mode) You can also set a programme number by pressing number buttons on the remote control. 10. If you do not know the channel numbers, press the  or  button to select “Search”. Press the ENTER button. Search by pressing the  or  button and then press the ENTER button. 11. Press the  or  button to select “Store”, then press the ENTER button. Press the  or  button to select “OK”, then press the ENTER button. 12. Repeat steps 3 to 11 for each channel to be stored.  Programme: Selects a program number for the channel.  Colour System: Sets the colour supporting system.  Sound System: Sets the sound supporting system.  Channel: Selects a channel.  Search: Scans for the frequency value for the channel.  Store: Saves your settings. Storing Channels Manually

scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1. Use the number buttons to directly select the channel that will be added or deleted. 2. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button. 3. Press the  or  button to select “Add/Delete”, then press the ENTER button. 4. Repeatedly pressing the ENTER button will alternate between add channel and delete channel. 5. Press the P or P buttons to switch to the appropriate channel, then repeat above. 6. Press the EXIT button to exit. You can view any channel (including an erased channel) by using the number buttons on the remote control. Editing the Channels You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. Give easily remembered numbers to the channels that you watch most often. 1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button. 2. Press the  or  button to select “Sort”, then press the ENTER button. 3. Press the ENTER button to select “From”. Press the  or  button until the channel number that you wish to change is displayed. Press the ENTER button. 4. Press the  or  button to select “To”, then press the ENTER button. Press the  or  button until the new number by which you wish to identify the channel is displayed. Press the ENTER button. 5. Press the  or  button to select “Store”, then press the ENTER button. Press the  or  button to select “OK”, then press the ENTER button. The selected channel is exchanged with the one previously stored to the chosen number. 6. Repeat steps 3 to 5 for another channel to be sorted. 7. Press the EXIT button to exit. Sorting the Stored Channels

is broadcast. These names can be changed, allowing you to assign new names. 1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button. 2. Press the  or  button to select “Name”, then press the ENTER button. 3. If necessary, select the channel to be assigned to a new name by pressing the  or  button. Press the ENTER button. 4. The characters available are : Letters of the alphabet (A~Z) Numbers (0~9) Special characters ( -, space) 5. Repeat steps 3 to 4 for each channel to be assigned to a new name. 6. Press the EXIT button to exit. Assigning Channels Names To... Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name Then... Press the  or  button Press the  button Press the  button Press the ENTER button Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. And the channel number turns red. To reset the fine-tuning, select “Reset” by pressing the  or  button and then press the ENTER button. Use fine tuning to manually adjust a particular channel for optimal reception. 1. Use the number buttons to directly select the channel that you want to fine tune. 2. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button. 3. Press the  or  button to select “Fine Tune”, then press the ENTER button. 4. Press the  or  button to adjust the fine tuning. Press the ENTER button. 5. Press the EXIT button to exit. Fine Tuning Channel Reception

viewing requirements. 1. Press the MENU button to display the menu. Press the  or  button to select “Picture”, then press the ENTER button. 2. Press the ENTER button to select “Mode”. 3. Press the  or  button to select the desired picture effect. Press the ENTER button. 4. Press the EXIT button to exit.  Dynamic: Selects the picture for high-definition in a bright room.  Standard: Selects the picture for optimum display in a normal environment.  Movie: Selects the picture for comfortable display in a dark room.  Custom: Select to view your favorite display settings. (Refer to “Adjusting the Custom Picture”) You can also press the P.MODE button on the remote control to select one of the picture settings. The Picture mode must be adjusted separately for each input source. If you make any changes to these settings, the picture mode is automatically switched to “Custom”. In PC Mode, Only “Contrast” and “Brightness” can be adjusted. Changing the Picture Standard  Contrast: Adjusts the lightness and darkness between objects and the background.  Brightness: Adjusts the brightness of the whole screen.  Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.  Colour: Adjusts the colours, making them lighter or darker.  Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look. Your set has several settings which allow you to control picture quality. 1. Press the MENU button to display the menu. Press the  or  button to select “Picture”, then press the ENTER button. 2. Press the  or  button to select “Custom”, then press the ENTER button. 3. Press the  or  button to select a particular item. Press the ENTER button. 4. Press the  or  button to decrease or increase the value of a particular item. Press the ENTER button. 5. Press the EXIT button to exit. Adjusting the Custom Picture

easy for you to adjust the volume every time the channel is changed. This feature let you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button. 2. Press the  or  button to select “Auto Volume”, then press the ENTER button. 3. Press the  or  button to select “On” or “Off”. Press the ENTER button. 4. Press the EXIT button to exit. Adjusting the Volume Automatically You can select the type of the special sound effect to be used when watching a given broadcast. 1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button. 2. Press the ENTER button to select “Mode”. 3. Press the  or  button to select the desired sound effect. Press the ENTER button. 4. Press the EXIT button to exit.  Standard: Selects the normal sound mode.  Speech: Emphasizes voices over other sounds. Changing the Sound Standard You can also select these options by simply pressing the S.MODE button on the remote control. You can select the most comfortable colour tone to your eyes. 1. Press the MENU button to display the menu. Press the  or  button to select “Picture”, then press the ENTER button. 2. Press the  or  button to select “Colour Tone”, then press the ENTER button. 3. Press the  or  button to select the desired colour tone setting. Press the ENTER button. 4. Press the EXIT button to exit. Changing the Colour Tone  Cool 2: Makes the colour temperature bluer than “Cool 1” menu.  Cool 1: Makes whites bluish.  Normal: Keeps whites white.  Warm1: Makes whites reddish.  Warm2: Makes the colour temperature redder than “Warm1” menu.

you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. 1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button. 2. Press the ENTER button to select “Time”. 3. Press the ENTER button to select “Clock Set”. 4. 5. Press the EXIT button to exit. If you disconnect the power cord, you have to set the clock again. You can also set hour and minute by pressing the number buttons on the remote control. To... Move to “Hour” or “Minute” Set the “Hour” or “Minute” Press the ENTER button. Press the...  or  button.  or  button. Setting and Displaying the Current Time You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button. 2. Press the ENTER button to select “Time”. 3. Press the  or  button to select “Sleep Timer”, then press the ENTER button. 4. Press the  or  button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180). Press the ENTER button. The TV automatically switches to standby mode when the timer reaches 0. 5. Press the EXIT button to exit. Setting the Sleep Timer Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears.

Switch on automatically and tune to the channel of your choice at the time you select. Switch off automatically at the time you select. 1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button. 2. Press the ENTER button to select “Time”. 3. Press the  or  button to select “On Timer”, then press the ENTER button. 4. Press the  or  button to adjust “Hour”, then press the  button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return. 5. Press the  or  button to select “Off Timer”, then press the ENTER button. 6. Press the  or  button to adjust “Hour”, then press the  button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return. 7. Press the EXIT button to exit. The first step is to set the television’s clock. (refer to “Setting and Displaying the Current Time” on page 14) You can also set hour and minute by pressing the number buttons on the remote control. The "Activation" setting must be set to "On" in order for the timers to work. Switching the Television On and Off Automatically When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. 1. Press the MENU button to display the on-screen menu. Press the  or  button to select “Setup”, then press the ENTER button. 2. Press the  or  button to select “Language”, then press the ENTER button. 3. Select a particular language by pressing the  or  button repeatedly. Press the ENTER button. You can choose one of two languages. 4. Press the EXIT button to exit. Choosing Your Language

automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off". 1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button. 2. Press the  or  button to select “Blue Screen” then press the ENTER button. 3. Press the  or  button to select “On” or “Off”. Press the ENTER button. 4. Press the EXIT button to exit. Setting the Blue Screen Mode You can select among external sources connected to your TV’s input jacks. 1. Press the MENU button to display the menu. Press the ENTER button to select “Input”. 2. Press the ENTER button to select “Source List”. 3. Select the required device by pressing the  or  button. Press the ENTER button. Selecting the Source Press the SOURCE button on the remote control to toggel between all the available source. TV mode can be selected by pressing the TV or P / button on the remote control but you cannot select it by pressing the SOURCE button. Name the device connected to the input jacks to make your input source selection easier. 1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”. 2. Press the  or  button to select “Edit Name”, then press the ENTER button. 3. Press the  or  button to input select input source that you wish to edit. Press the ENTER button. 4. Press the  or  button to select the required device. Press the ENTER button. 5. Press the EXIT button to exit. Editing the Input Source Names

information that provide information such as: Television programme times. News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing. The teletext pages are organized according to six categories: Part A B C D E F Contents Selected page number. Broadcasting station identity. Current page number or search status. Date and time. Text. Status information. Teletext Decoder You can display teletext information at any time, but signal reception must be good. Otherwise: Information may be missing. Some pages may not be displayed. To activate the teletext mode and display the contents page: 1. Using the P ( ) or P ( ) button, select the channel providing the teletext service. 2. Press the TTX/MIX ( ) button to activate the teletext mode. The contents page is displayed. It can be redisplayed at any time by pressing the MENU ( ) button. 3. Press the TTX/MIX ( ) button again. The actual broadcast will be displayed simultaneously with the teletext page on the screen. 4. Press the TV( ) button to exit from the Text display. If any broken character appears while Text is being viewed, make sure that the Text language is identical with the language in the “Setup” menu mode. If both languages are different, select the same language with the Text language on the “Setup” menu. Displaying the Teletext Information

number directly: 1. Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. 2. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the ( ). Press the ( ) button again to resume. 3. Using the various display options: To display... Both teletext information and the normal broadcast Hidden text (answers to quiz games, for example) The normal screen A secondary page, by entering its 4-digit number The next page The previous page Double-size letters in the:  Upper half of the screen  Lower half of the screen Normal screen Press the... TTX/MIX ( ) INFO ( ) INFO ( ) DUAL I-II ( ) P ( ) P ( ) ( )  Once  Twice  Three times Selecting a Specific Teletext Page The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. 1. Display the teletext contents page by pressing the TTX/MIX ( ) button. 2. Press the coloured button corresponding to the topic that you wish to select (The available topics are listed on the status information line). 3. Press the Red button to display the previous page. Press the Green button to display the next page. 4. Press the TV ( ) button again to exit from the Text display. Using Fastext to Select a Teletext Page You can store up to four teletext pages to display them later at leisure. 1. Select the LIST mode using the SOURCE ( ) button. The SOURCE ( ) button is used to switch between the LIST and FLOF modes. 2. Press the coloured button corresponding to the page that will be replaced. 3. Enter the new page number using the numeric buttons. 4. Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time. 5. Press the SLEEP ( ) button until the corresponding blocks blink. Storing Teletext Pages

may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on “Control Panel” on the Windows start menu. 2. When the control panel window appears, click on “Appearance and Themes” and a display dialog-box will appear. 3. When the control panel window appears, click on “Display” and a display dialog-box will appear. 4. Navigate to the “Settings” tab on the display dialog-box. The correct size setting (resolution): Optimum LA15S51BP: 1024 X 768 LA20S51BP: 800 X 600 LS17M24CP: 1280 X 1024 If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box. Setting up Your PC Software (Based on Windows XP) The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported) Mode VGA SVGA XGA LA15S51BP LS17M24CP SXGA LS17M24CP Resolution 720X400 640X480 640X480 800X600 800X600 1024X768 1024X768 1280X1024 1280X1024 Horizontal Frequency (kHz) 31.469 31.469 37.500 46.875 37.879 48.363 60.023 63.981 79.976 Vertical Frequency (Hz) 70.087 59.940 75.000 75.000 60.317 60.004 75.029 60.020 75.025 Pixel Clock Frequency (MHz) 28.322 25.175 31.500 49.500 40.000 65.000 78.750 108.000 135.000 Sync Polarity (H/V) - / + - / - - / - + / + + / + - / - + / + +,- / -,+ + / +

Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the fre- quency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1. Preset: Press the SOURCE button to select PC mode. 2. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button. 3. Press the  or  button to select “PC”, then press the ENTER button. 4. Press the ENTER button to select “Image Lock”. 5. Press the  or  button to select “Coarse” or “Fine”, then press the ENTER button. 6. Press the  or  button to adjust the screen quality. Press the ENTER button. 7. Press the EXIT button to exit. Changing the Image Position (Position): Adjust the PC’s screen positioning if it does not fit the TV screen. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the  or  button to select “Position”, then press the ENTER button. 3. Press the  or  button to adjusting the Vertical-Position. Press the  or  button to adjust the Horizontal-Position. Press the ENTER button. 4. Press the EXIT button to exit. Initializing the Image Settings (Image Reset): You can replace all image settings with the factory default values. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the  or  button to select “Image Reset”, then press the ENTER button. 3. Press the EXIT button to exit. Adjusting the PC Screen Automatically (Auto Adjustment): Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the  or  button to select “Auto Adjustment”, then press the ENTER button. 3. Press the EXIT button to exit.

No sound or picture Normal picture but no sound No picture or black and white picture Sound and picture interference Blurred or snowy picture, distorted sound Remote control malfunctions “Check signal cable.” message is displayed. On PC mode, “Not Supported Mode.” message is displayed. The TFT LCD panel uses a panel consisting of sub pixels (LA15S51BP - 2,359,296, LA20S51BP - 1,440,000, LS17M24CP - 3,932,160) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.  Check that the mains lead has been connected to a wall socket.  Check that you have pressed the POWER buttons on the lower-right panel.  Check the picture contrast and brightness settings.  Check the volume.  Check the volume.  Check whether the MUTE button has been pressed on the remote control.  Adjust the colour settings.  Check that the broadcast system selected is correct.  Try to identify the electrical appliance that is affecting the set and move it further away.  Plug your set into a different mains socket.  Check the direction, location and connections of your aerial. This interference is often due to the use of an indoor aerial.  Replace the remote control batteries.  Clean the upper edge of the remote control (transmission window).  Check the battery terminals.  Check that the signal cable is firmly connected to the PC or video sources.  Check that the PC or video sources are turned on.  Check the maximum resolution and the frequency of the video adaptor.  Compare these values with the data in the Display Modes. Troubleshooting: Before Contacting Service Personnel Model Name Screen Size (diagonal) Power Supply Power Consumption PC Resolution Sound Output Dimension (WxDxH) Body With stand Weight With stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity LA15S51BP 15 inch AC100V-240V 50/60 Hz 40W 1024 x 768 @ 60 Hz 3W + 3W 496.0 x 82.0 x 333.0 mm 496.0 x 170.0 x 359.0 mm 4.0 kg (8.81 lbs) 10 °C to 40 °C (50 °F to 104 °F) 10 % to 80 %, non-condensing -20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing LA20S51BP 20 inch AC100V-240V 50/60 Hz 55 W 800 x 600 @ 60 Hz 3W + 3W 607.0 x 94.0 x 436.0 mm 607.0 x 215.0 x 464.0 mm 7.8 kg (17.19 lbs) 10 °C to 40 °C (50 °F to 104 °F) 10 % to 80 %, non-condensing -20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing LS17M24CP 17 inch AC100V-240V 50/60 Hz 45 W 1280 x 1024 @ 60 Hz 3W + 3W 416.7x 71.8 x 392.9 mm 416.7 x 192.9 x 423.8 mm 4.95 kg (10.91 lbs) 10 °C to 40 °C (50 °F to 104 °F) 10 % to 80 %, non-condensing -20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing