Sanyo DS20930 Service Manual

Television DS20930 (U.S.A.) (CANADA) (MEXICO) ORIGINAL VERSION Chassis No. 20930-00 NOTE: Match the Chassis No. on the unit’s back cover with the Chassis No. in the Service Manual. If the Original Version Service Manual Chassis No. does not match the unit’s, additional Service Literature is required. You must refer to “Notices” to the Original Service Manual prior to servicing the unit. Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 2 Service Adjustments. . . . . . . . . . . . . . . . . . . 3 - 9 Purity and Convergence Adjustments. . . . 10 - 11 Service Hints . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Mechanical Disassemblies . . . . . . . . . . . . . . . 13 Chassis Electrical Parts List . . . . . . . . . . . 14 - 21 Cabinet Parts List . . . . . . . . . . . . . . . . . . . . . . 22 Component and Test Point Locations. . . . 23 - 25 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . 26 Specifications Power Rating . . . . . . . . . . . . . . . . . . . . . . 120V, 60Hz Antenna Input Impedance . . . . . . . . . . . . . . . . . . 75Ω UHF/VHF/CATV Receiving Channel. . . . . . . . . . . . . . . . . . 2-13 (VHF), 14-69 (UHF), 01, 14-94, 95-125 (CATV) Remote Ready . . . . . . . . . . . 26 Key Remote Control Sound Output . . . . . . . . . . . . . . . . . . . . . . . . . 1 W/ch Intermediate Frequency Picture IF Carrier . . . . . . . . . . . . . . . . . . 45.75MHz Sound IF Carrier. . . . . . . . . . . . . . . . . . . 41.25MHz Color Sub Carrier . . . . . . . . . . . . . . . . . . 42.17MHz Picture Tube . . . . . . . . . . . . . . . . . . . . . A51LVG896X Semiconductors Integrated Circuits. . . . . . . . . . . . . . . . . . . . . . . . . 9 Transistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Except within Tuner and RC Pre-Amp. Cabinet Dimensions Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 587mm Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458mm Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486mm REFERENCE No. SM780088 DS20930, C3RK, PRODUCT CODE 111351429 - + CH MENU VOL POWER FILE NO.

SAFETY PRECAUTIONS WARNING: The chassis of this receiver has a floating ground with the potential of one half the AC line voltage in respect to earth ground. Service should not be attempted by anyone not familiar with the precautions necessary when working on this type of equipment. The following precautions must be observed: 1. An isolation transformer must be connected in the power line between the receiver and the AC line before any service is performed on the receiver. 2. Comply with all caution and safety-related notes provided on the side of the cabinet, inside the cabinet, on the chassis, and the picture tube. 3. When replacing a chassis in the cabinet, always be certain that all the protective devices are installed properly, such as control knobs, adjustment covers, shields and barriers. DO NOT OPERATE THIS TELEVISION RECEIVER WITHOUT THE PROTECTIVE SHIELD IN POSITION AND PROPERLY SECURED. 4. Before replacing the back cover of the set, thoroughly inspect the inside of the cabinet to see that no stray parts or tools have been left inside. Before returning any television to the customer, the service technician must perform the following safety checks to be sure that the unit is completely safe to operate without danger of electrical shock. ANTENNA COLD CHECK Remove AC plug from the 220 VAC outlet and place a jumper across the two blades. Connect one lead of an ohmmeter to the jumpered AC plug, and touch the other lead to each exposed antenna terminal (UHF and VHF antenna terminals). The resis- tance must measure 10M ohm or over. Any resistance value below this range indicates an abnormality which requires correc- tive action. LEAKAGE CURRENT CHECK Plug the AC line cord directly into a 220 VAC outlet. (Do not use an isolation transformer for this check.) Use an AC voltmeter, that has 5000 ohms per volt or more sensitivity. Connect a 2000 ohm 10 watt resistor, between a known good earth ground (water pipe, conduit, etc.) and all exposed metal parts of the cabinet (antennas, earphone jack, screwheads, metal overlays, control shafts, etc.). Measure the AC voltage across the 2000 ohm resistor. The AC voltage should not exceed 1400 mV. A reading exceed- ing 1400 mV indicates that a dangerous potential exists. The fault must be located and corrected. Repeat the above test with the receiver power plug reversed. NEVER RETURN A RECEIVER TO THE CUSTOMER WITHOUT TAKING THE NECESSARY CORRECTIVE ACTION. X-RADIATION PRECAUTION The primary source of X-RADIATION in solid-state receivers is the picture tube. The picture tube is specially constructed to limit X-Ray emission. For continued X-RADIATION protection, the replacement tube must be the same type as the original (including the suffix let- ter in the part numbers). Excessive high voltage may produce potentially hazardous X-RADIATION. To avoid such hazards, the high voltage must be maintained within specific limits. Refer to the X- RADIATION WARNING NOTE on the CHASSIS SCHEMATIC in this service manual for specific high voltage limits. If the high volt- age exceeds specified limits, check the components specified on the chassis schematic diagram and take the necessary corrective action. Carefully follow the instructions for the +B Voltage Check and the High Voltage Check to maintain the high voltage within the specified limits. PRODUCT SAFETY NOTICE When replacing components in a receiver, always keep in mind the necessary product safety precautions. Pay special attention to the replacement of components marked with a star (#) in the parts list and in the schematic diagrams. To ensure safe product operation, it is necessary to replace those components with the exact same PARTS. SAFETY INSTRUCTIONS 2000 ohm 10 watt Good earth ground such as a water pipe, conduit, etc. AC OUTLET TELEVISION RECEIVER READING SHOULD NOT EXCEED 1400 mV. AC VOLTMETER (5000 ohms per volt or more sensitivity) To be touched to all of exposed metal parts. Voltmeter Hook-up for Leakage Current Check.

ON-SCREEN SERVICE MENU SYSTEM 1. Enter the Service Menu: SERVICE ADJUSTMENTS — 3 — IC802 (EEPROM) REPLACEMENT When IC802 (EEPROM) is replaced, IC801 (CPU) will automatically write the initial reference data into IC802 for basic TV operation. However, the bus data should be checked and some bus data should be set up before attempting the service adjustments. (See pages 4 ~ 6 for detailed information.) INITIAL BUS DATA SETUP Note: When IC802 (EEPROM) is replaced, the Service Menu NO. 03 HP (H Phase), NO. 07 VLN (V Lin), NO. 28 PRE (Preshoot Adj), NO. 37 AF (Auto Flesh), NO. 57 OPT (SA Option), and NO. 58 OP2 (SA Option 2) should be set up for proper TV oper- ation before attempting the service adjustments. 1. Disconnect the AC power cord (AC 120V line). 2. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 3. Select NO. 23 POS (Pre/Over SW) with L or M key. Adjust the data with + or – key for 1. 4. Select NO. 28 PRE (Preshoot Adj) with L or M key. Adjust the data with + or – key for 2. 5. Select NO. 37 AF (Auto Flesh) with L or M key. Adjust the data with + or – key for 1. 6. Select NO. 57 OPT (SA Option) with L or M key. Adjust the data with + or – key for 100. 7. Select NO. 58 OP2 (SA Option 2) with L or M key. Adjust the data with + or – key for 32. 8. Select NO. 63 SPO (Sub Bright Offset) with L or M key. Adjust the data with + or – key for 6. 9. Press the MENU key to turn off the Service Menu display. NO. DATA XX OPT XXX XXXXXXXX DECIMAL DATA Figure 1. Service Menu Display ITEM NO. TITLE BINARY DATA (8 bit) 2. Service Adjustments: • Press the L or M key to select the desired service menu you want to adjust. (See pages 4 for On-screen Service Menu.) • Use the + or – key to adjust the data. 3. Exit from the Service Menu: • Press the MENU key to turn off the Service Menu display.

FUNCTION DATA DATA 01 HFR 29 29 0~63 Horizontal Frequency 02 AFC 0 0 0,1 AFC Gain & Gate 03 HP 15 15 0~31 Horizontal Phase (Horizontal Centering) 04 VS 64 64 0~127 Vertical Size 05 VPO 5 5 0~63 Vertical Position 06 VSP 0 0 0,1 Vertical Set Up (Sync. Sensitivity) 07 VLN 18 18 0~31 Vertical Linearity 08 CRS 0 0 0~3 Cross B/W 09 GRY 1 1 0,1 Gray Mode 10 VSC 8 8 0~31 Vertical S Correction 11 HBR 3 3 0~7 H BLK R 12 HBL 4 4 0~7 H BLK L 13 CDM 0 0 0, 1 C D Mode 14 VC 7 7 0~7 Vertical Compression 15 RB 0 0 0~255 Red Bias 16 GB 0 0 0~255 Green Bias 17 BB 0 0 0~255 Blue Bias 18 RD 64 64 0~127 Red Drive 19 GD 8 8 0~15 Green Drive 20 BD 64 64 0~127 Blue Drive 21 SBI 48 48 0~127 Sub Bias 22 OSD 3 3 0~3 OSD Contrast 23 POS 0 1* 0,1 Pre/Over SW 24 FLS 1 1 0~7 Filter System 25 CKO 3 3 0~7 Color Killer Operation 26 GYA 0 0 0,1 G-Y Angle 27 CRG 2 2 0~3 Coring Gain 28 PRE 1 2* 0~3 Pre Shoot Adjust 29 WP 1 1 0,1 White Peak Limiter 30 FSW 0 0 0,1 FBP Blanking Switch 31 VBL 0 0 0,1 Vertical Blanking Switch 32 BSG 2 2 0~3 Black Stretch Gain 33 BSS 1 1 0~3 Black Stretch Start 34 DCR 1 1 0~3 DC Reset 35 YGM 1 1 0~3 Y Gamma 36 CBP 0 0 0,1 C Bypass 37 AF 0 1* 0,1 Auto Flesh 38 BAT 4 4 0~7 Brightness ABL Threshold 39 MSD 0 0 0,1 Mid Stop Def. 40 ABL 0 0 0,1 Auto Brightness Limit 41 RYA 2 2 0~15 R-Y/B-Y Angle 42 RAD 15 15 0~63 RF AGC Delay 43 IAS 0 0 0,1 IF AGC 44 FMM 0 0 0,1 FM Mute 45 FL 15 15 0~31 FM Level — 4 — Table 1. ON-SCREEN SERVICE MENU When IC802 (EEPROM) is replaced, check the bus data to confirm they are the same as below. The shaded menu should be checked and be set up or readjusted according to the procedures described in the following pages. Initial Setup Data marked with an * should be changed from Initial Reference Data. (See page 3 for Initial Bus Data Setup.)

FUNCTION DATA DATA 46 VL 4 4 0~7 Video Level 47 EWD 39 39 0~63 EW DC. 48 EWA 30 30 0~63 EW Amp. 49 EWT 34 34 0~63 EW Tilt 50 EWP 7 7 0~7 EW Corner Top 51 EWB 8 8 0~7 EW Corner Bottom 52 HSC 7 7 0~7 Horizontal Size Comp. 53 SB 32 32 0~63 Sub Brightness 54 SCO 7 7 0~31 Sub Color 55 STI 20 20 0~31 Sub Tint 56 SSH 12 12 0~31 Sub Sharpness 57 OPT 0 100* 0~255 Option (See Note 1 page 6.) 58 OP2 0 32* 0~255 Option 2 (See Note 2 page 6.) 59 HR 27 27 0~63 OSD Horizontal Position 60 ATT 7 7 0~63 Input Level 61 WDB 32 32 0~63 Wideband 62 SPC 32 32 0~63 Spectral 63 SBO 5 6* 0~255 Sub Brighatness Offset 64 PCO 40 40 0~63 PIP Color 65 PTI 40 40 0~63 PIP Tint 66 PUV 24 24 0~63 PIP Top Position 67 PDV 147 147 0~255 PIP Bottom Position 68 PLH 40 40 0~63 PIP Left Position 69 PRH 101 101 0~255 PIP Right Position 70 PCN 52 52 0~63 PIP Y level 71 PBS 15 15 0~63 PIP BGP Phase 72 DRV 64 64 0~127 Red Drive Adjustment (See Note 3 page 6.) 64 64 0~127 Blue Drive Adjustment (See Note 3 page 6.) 73 – 0 0 0~255 Red Bias Adjustment (See Note 4 page 6.) – 0 0 0~255 Green Bias Adjustment (See Note 4 page 6.) – 0 0 0~255 Blue Bias Adjustment (See Note 4 page 6.) — 5 — Table 1. ON-SCREEN SERVICE MENU (Continued) When IC802 (EEPROM) is replaced, check the bus data to confirm they are the same as below. The shaded menu should be checked and be set up or readjusted according to the procedures described in the following pages. Initial Setup Data marked with an * should be changed from Initial Reference Data. (See page 3 for Initial Bus Data Setup.)

SERVICE ADJUSTMENTS (Continued) PROGRAM CODES The microprocessor used in this model is a multi-purpose type and is used in several different models. To ensure proper operation and the correct features for your particular model, the Program Codes must be correct. Note 1. Option Data 1 (No. 57 OPT) should be decimal 100 (01100100 binary). See page 3 INITIAL DATA SETUP, step 6, for set up procedure. If this program code is wrong, the TV will not operate properly. Note 2. Option Data 2 (No. 58 OP2) should be decimal 32 (00100000 binary). See page 3 INITIAL DATA SETUP, step 7, for set up procedure. If this program code is wrong, the TV will not operate properly. Figure 2. 1 3 6 9 RD(-) (N/A) RD(+) BD(+) FOR RED DRIVE ADJUSTMENTS DRIVE / BIAS ADJUSTMENTS Note 3. Red/Blue Drive Adjustments in Service Menu No. 72 DRV: Adjust Red and Blue Drive Levels alternately with 1, 3, 7, and 9 keys on the remote control. (See Figure 2.) The Drive Level adjustment data will be rewritten in the Service Menu No. 18 and 20 automatically. (N/A) 2 5 8 (N/A) (N/A) No. 57 OPT BIT FUNCTION DATA 0 1 0,1 TV 00: TV HOTEL 01: HOTEL MONITOR 10: MONITOR 11: INHIBITED (=TV) 2 VIDEO INPUT NONE YES 3,4 CLOCK NOT USED 5 STEREO/MONO MONO STEREO 6,7 SURROUND 00: NONE 01: YES 10: NOT USED 11: NOT USED No. 58 OP2 BIT FUNCTION DATA 0 1 0 V-GUIDE YES NONE 1 COLOR ENHANCER NOT USED 2 INITIAL CHANNEL NOT USED 3 NOT USED NOT USED 4 PIP NOT USED 5 AV1/AV1, AV2 AV1 AV1, AV2 6 TONE/BASS,TREBLE NOT USED 7 GAME KEY NONE YES 4 7 (N/A) BD(-) FOR BLUE DRIVE ADJUSTMENTS Note 4. Red/Green/Blue Bias Adjustments in Service Menu No. 73: Adjust each Bias Level with 1, 3, 4, 6, 7, or 9 key on the remote control. (See Figure 3.) The Bias Level adjustment data will be rewritten in the Service Menu No. 15 ~ 17 automatically. 1 3 6 9 RB(-) (N/A) RB(+) BB(+) FOR RED BIAS ADJUSTMENTS (N/A) 2 5 8 GB(+) (N/A) 4 7 GB(-) BB(-) FOR BLUE BIAS ADJUSTMENTS Figure 3. FOR GREEN BIAS ADJUSTMENTS

ANTENNA CONNECTIONS This receiver is designed for UHF/VHF reception. A 75 ohm terminal is provided for UHF and VHF receptions. When connecting a CATV antenna system, connect the 75 ohm coaxial cable directly to the 75 ohm terminal. For 300 ohm VHF antenna, use the adapter (included with the TV set). CIRCUIT PROTECTION Fuse F601 (4A) is included in the AC line. This fuse must be replaced with the proper fuse. (See Parts List.) FOR CONTINUED PROTECTION AGAINST A RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE 4A, 125V FUSE. ATTENTION: POUR MAINTENIR LA PROTECTION CONTRE LES RISQUES D’ INCENDIE UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE 4A, 125V. +B VOLTAGE CHECK Connect voltmeter + lead to TJ1 130V and – lead to ground (TE7). Connect receiver to AC 120V line. Tune receiver to an active channel. Reset the picture controls to the FACTORY PRESET levels (press remote control RESET key twice). Voltage must measure between +128.0V and +132.0V. If the voltage is out of this range, the power circuit must be checked. No +B adjustment is provided on this chassis. HORIZONTAL CENTERING ADJUSTMENT 1. Tune receiver to an active channel. 2. Check that picture is in the horizontal center of TV screen. If picture is too right or left, perform steps 3 ~ 6. 3. Turn off the receiver and disconnect the AC power cord. 4. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 5. Select No. 03 HP (Horizontal Phase) with L or M key. 6. Adjust the data with + or – key for horizontal center. To turn off the Service Menu display, press the MENU key. VERTICAL SIZE ADJUSTMENT 1. Tune receiver to an active channel. 2. Check the vertical size of the picture. If the vertical size is too large or small, perform steps 3 ~ 6. 3. Turn off the receiver and disconnect the AC power cord. 4. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 5. Select No. 04 VS (Vertical Size) with L or M key. 6. Adjust the data with + or –key for full scan. To turn off the Service Menu display, press the MENU key. VERTICAL CENTERING ADJUSTMENT 1. Tune receiver to an active channel. 2. Check that picture is in the vertical center of TV screen. If picture center is too low, add a cutting wire to R513. VCO ADJUSTMENT Note: VCO must be adjusted after IC101 (Signal Processor), IC802 (EEPROM) or T151 (IF VCO Coil) is replaced. 1. Tune receiver to an active channel. 2. Set the picture controls to the Sports level. 3. Connect digital voltmeter + lead to pin 58 of IC101(TP10) and – lead to ground (TE 7). 4. Confirm a reading of 3.6 ±0.6 VDC. 5. If voltage is out of specifications adjust T151 for 3.6 ±0.6 VDC. RF-AGC ADJUSTMENT 1. Tune receiver to strongest VHF station in your area. 2. Set contrast and brightness controls for maximum. 3. Turn off the receiver and disconnect the AC power cord (120V AC line). 4. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 5. Select No. 42 RAD (RF AGC Delay) with L or M key. 6. Adjust the data with + or – key in the direction which causes snow to appear, then in the opposite direction until the snow just disappears. VIDEO LEVEL 1. Connect color-bar generator to antenna terminal. 2. Turn off the receiver and disconnect the AC power cord (120V AC line). 3. Connect oscilloscope to TP16(Q202 emitter) and ground. 4. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 5. Select No. 46 VL (Video Level) with L or M key. 6. Adjust the + or – key for an oscilloscope reading of 1.0±0.1 Vp-p at TP16. Press the MENU key to turn off the Service Menu display. 1.0 ±0.1 Vp-p Figure 4. 4A 125V CAUTION

SERVICE ADJUSTMENTS (Continued) GRAYSCALE ADJUSTMENT 1. Set the picture controls to the Sports levels or Reset (use MENU key and L or M key or RESET key). 2. Turn off the receiver and disconnect the AC power cord (120V AC line). 3. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 4. Select No. 15 RB (Red Bias), No. 16 GB (Green Bias), and No. 17 BB (Blue Bias) with L or M key and set each data to 0 with + or – key. 5. Select No. 18 RD (Red Drive) and No. 20 BD (Blue Drive) with L or M key and set each data to 64 with + or – key. 6. Set No. 19 GD (Green Drive Reduction) data to 8, No. 53 SB (Sub Brightness) data to 32, NO. 54 SCO (Sub Color ) data to 7, NO. 55 STI (Sub Tint) to 20, and NO. 56 SSH (Sub Sharpness) data to 12 with L or M, and + or – keys. 7. Turn Screen Control (T402) to minimum (fully counterclock- wise). 8. Select the Service Menu No. 73 (Bias Adjustments) with L or M key. 9. Advance Screen Control (T402) clockwise to obtain just visible one color line. If line does not appear, place this control to maximum (fully clockwise). 10. Raise each Bias Level with 3, 6, and 9 keys to obtain just visible white line. (See Figure 5 below.) Figure 5. Remote Control Number keys’ functions in Service Menu No. 73 Figure 6. Remote Control Number keys’ functions in Service Menu No. 72 DRV BRIGHTNESS LEVEL ADJUSTMENT Note:Grayscale, RF AGC, Video Level, and High Voltage Check must be adjusted before attempting Brightness Level Adjustment. 1. Connect a color-bar generator to the antenna terminal. 2. Switch the generator to the crosshatch pattern. 3. Reset the picture controls to the Sports levels. 4. Connect voltmeter (high impedance) + lead to terminal TP51 and – lead to terminal TP50 on main board. Set volt- meter for 1.5V~3.0V range. 5. Turn off the receiver and disconnect the AC power cord (120V AC line). 6. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 7. Select No. 53 SB (Sub Brightness) with L or M key. 8. Adjust the data with + or – key for 650mVDC. 9. Press the MENU key to turn off the Service Menu display. 10. Check brightness level on every active channels, readjust (repeat steps 5~9), if necessary. Note: Do not set to excessive brightness level, otherwise the contrast level will be suppressed. HIGH VOLTAGE HOLD-DOWN TEST Every time the receiver is serviced, the HIGH VOLTAGE HOLD -DOWN circuit must be tested for proper operation by following these steps; 1. Connect receiver to 120V AC line. Tune receiver to active channel. Reset the picture controls to the Sports levels. 2. Check that the voltage measured between TP7 and TE7 (ground side) is within 16.5 VDC to 21 VDC. If the voltage is out of this range, the Hold-Down Circuit must be checked. 3. Connect a DC Voltage supply to TP7 and TE7 through a 100 ohm 1/4W resistor. Adjust the DC voltage to 23VDC. The receiver should shutdown, losing raster and sound. Then the receiver should turn off automatically. This reaction indicates that the Hold-Down circuit is functioning properly. If the receiver goes not shutdown, a malfunction is indicated and its cause must be found and corrected. 4. To obtain picture again, remove the DC Supply and wait a few minutes. Now turn on the receiver. 1 3 6 9 RD(-) (N/A) RD(+) BD(+) FOR RED DRIVE ADJUSTMENTS (N/A) 2 5 8 (N/A) (N/A) 4 7 (N/A) BD(-) FOR BLUE DRIVE ADJUSTMENTS 1 3 6 9 RB(-) (N/A) RB(+) BB(+) FOR RED BIAS ADJUSTMENTS (N/A) 2 5 8 GB(+) (N/A) 4 7 GB(-) BB(-) FOR BLUE BIAS ADJUSTMENTS FOR GREEN BIAS ADJUSTMENTS 11. Select the Service Menu No. 72 DRV (Drive Adjustments) with L or M key. 12. Adjust Red and Blue Drive Levels alternately with 1, 3, 7, or 9 key to produce normal black and white picture in highlight areas. (See Figure 6.) 13. Check for proper grayscale at all brightness levels. To turn off the Service Menu display, press the MENU key. Note: If Grayscale Adjustment is made after picture tube replacement, make Brightness Level Adjustment. FOCUS ADJUSTMENT Adjust focus control (T402) for well defined scanning lines.

SOUND ADJUSTMENT 1. Connect a color-bar generator to the antenna terminal with audio signal of 1KHz at 100% modulated. 2. Set the picture controls to the Sports levels. 3. Connect oscilloscope + lead to TP21 (base Q135) and – lead to ground. 4. Turn off the receiver and disconnect the AC power cord (120V AC line). 5. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 6. Select No. 45 FL (FM Level) with L or M key. 7. Adjust the data with + or – key for an oscilloscope reading of 0.693 ±10% Vp-p at TP21. 8. Press the MENU key to turn off the Service Menu display and disconnect the oscilloscope fromthe chassis. Figure 8. Separation Adjustments SEPARATION ADJUSTMENT 7. Turn off the receiver and disconnect the AC power cord (120V AC line). 8. Connect oscilloscope CH1 to TP317 and CH2 to TP318 and ground. 9. Connect an MTS TV/Stereo generator to antenna terminal. 10. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 11. Select pilot , 300Hz audio frequency and Left modulating signal. 12. Select NO. 61 WDB (Wideband) with L or M key. 13. Adjust the + or – key for minimum low frequencies at TP317.(See Figure 8.) 14. Select 4K Hz audio frequency and Right modulating signal. 15. Select NO. 62 SPC (Spectral) with L or M key. 16. Adjust the + or – key for minimum high frequencies at TP318.(See Figure 8.) Repeat adjustment (steps 11-16) until no further decrease in amplitude can be obtained. Press the MENU key to turn off the Service Menu display. 0.693 ±10% Vp-p 300Hz TP317 (R) Minimize L leakage 4KHz TP318 (L) Minimize R leakage Figure 7. MULTI-SOUND SECTION ADJUSTMENTS Note: Multi-Sound Section must be adjusted after IC101 (Signal Processor), IC3401 (MTS Decoder) or IC802 (EEPROM) is replaced. INPUT LEVEL ADJUSTMENT 1. Connect a signal to the antenna terminal with audio signal of 1KHz at 100% modulated. 2. Turn off the receiver and disconnect the AC power cord (120V AC line). 3. Connect voltmeter (RMS) to TP317 and ground. 4. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear. 5. Select NO. 60 ATT (Attenuation) with L or M key. 6. Adjust the + or – key for a voltmeter reading of 400 ±20 mVrms at TP317.

PURITY AND CONVERGENCE ADJUSTMENTS PURITY ADJUSTMENT 1. When replacing picture tube or deflection yoke, mount deflection yoke and purity-convergence magnets assembly properly. See Figure 1. Position the picture tube facing east or west. Demagnetize the picture tube and receiver using an external degaussing coil. Set receiver to TV Service Menu No. 73 (no vertical sweep) while degaussing. 2. Place the yoke on tube neck fully forward against glass. Place the CPM on the tube neck aligning the center of the purity magnet tabs (2 pole) over center of Focus Gap (G3 & G4). See Figure 2. 3. Connect a color bar generator to the antenna terminal. Switch the generator to a white field. Move yoke backward on the neck until a uniform white field is obtained. 4. Allow 30 minutes warm up on a blank white field (high intensity grayscale). Note: If white field cannot be obtained, check Grayscale Adjustments on page 6. 5. Set the picture controls to the Auto levels. Select a green raster, either with the signal generator or by adjusting the bias controls. If a signal generator is used for this step, Skip to Step 10. If the bias controls will be used, go to step 6. 6. Adjust TV Service Menu No. 15 RB (R-Bias), No. 16 GB (G-Bias), and No. 17 BB (B-Bias) data to 0 each. 7. Select TV Service Menu No. 73 (no vertical sweep). 8. Adjust the screen control counterclockwise until the horizontal scan lines is no longer visible. 9. Select TV Service Menu No. 16 GB (G-Bias) and raise the data to produce green raster. If retrace lines appear, reduce screen control slightly. 10. Pull yoke back on the tube neck to obtain three-color raster (blue, green and red). 11. Adjust the angle between the two purity magnet tabs to center the vertical green belt in the picture tube. Do not rotate tabs. See Figure 3. 12. Slowly slide the deflection yoke forward until a uniform green screen is obtained. 13. Check the purity of the red and blue screens for uniformity. Turn off other colors to check (use bias controls) or use generator. If necessary, readjust the yoke position until all screens are pure. 14. If bias controls and screen control were used to set purity, reset Grayscale. Refer to Grayscale Adjustment on page 6. 15. Confirm that the yoke is not tilted. Tighten the yoke mounting screw. Adjust convergence next. CAUTION: Purity and Convergence adjustments have been made at the factory. Readjustments should be made only after the picture tube or deflection yoke is replaced. Follow the steps below for the necessary readjustments. RUBBER WEDGE DEFLECTION YOKE DEFLECTION YOKE MOUNTING SCREW Figure 1. Deflection Yoke Movement SIX-POLE MAGNET TABS FOUR-POLE MAGNET TABS ANGLE OF TABS PURITY MAGNET TABS 4 3 2 1 FOCUS GAP (G3-G4) Figure 2. Purity and Convergence Magnets MAGNET TABS ANGLE OF MAGNET TABS Figure 3. Adjusting Magnet

1. Connect a crosshatch generator to antenna terminals. 2. Set Contrast control to low level to eliminate Blooming. Reduce Brightness level to obtain black background if necessary. 3. Adjust the angle between the four-pole magnet tabs 1 and 2 (Figure 2), and superimpose the red and blue vertical lines in the center area of the picture screen. See Figure 4. 4. Keeping the tabs at the same angle, rotate them together to superimpose the blue and red horizontal lines in the center area of the picture screen. See Figure 4. 5. Adjust the six-pole magnet tabs 3 and 4 so the converged red/blue line is superimposed on the green line. This is the same procedure used in Steps 3 and 4. See Figure 5. OUTER AREA CONVERGENCE ADJUSTMENT The outer area convergence is performed by positioning of the yoke as follows: 1. Move the top of the yoke toward or away from the picture tube. This movement will affect the vertical lines at the top and bottom and the horizontal lines at the sides. See Figure 6. 2. Check that splits at 12 O’Clock and 6 O’Clock positions are minimized, adjust yoke for best compromise. Secure with wedge at 12 O’Clock position. See Figure 1. 3. Move the side of the yoke toward or away from the picture tube to converge the horizontal lines at the top and bottom and the vertical lines at the sides. See Figure 7. 4. Check that splits at 12 O’Clock and 6 O’Clock are minimized, adjust yoke for best compromise. Secure yoke position with the side wedges. See Figure 1. Note: When reusing the rubber wedges, apply a small amount of silicone rubber adhesive or hot melt to each of the wedges. — 11 — RED GREEN BLUE RED GREEN BLUE Line movement when adjusting top of yoke in and out. BLUE RED Adjust four-pole tabs angle to superimpose blue and red vertical line. Adjust four-pole tabs together to superimpose red and blue horizontal line. BLUE GREEN RED BLUE GREEN RED BLUE GREEN RED BLUE GREEN RED Line movement when adjusting side of yoke in and out. BLUE / RED GREEN Adjust six-pole tabs angle to superimpose red / blue and green vertical line. Adjust six-pole tabs together to superimpose red / blue and green horizontal line. Figure 4. Blue an Red Line Movement Figure 6. Top of Yoke Movement Figure 5. Blue/Red and Green Line Movement Figure 7. Side of Yoke Movement

SERVICE HINTS POWER FAILURE DETECTOR This set is equipped with a Power Failure Detector function included in the CPU which checks for an abnormal condition in the chassis power supplies, including the power supply derived from the Horizontal Output Transformer. If, while the power is on, a failure is caused by any of the following that results in a low voltage supply, the CPU will turn the unit off in 1.5 seconds to prevent unnecessary damage: • Failure within the power supply circuits. • A short circuit in the load side from the supply. • Stoppage of the Horizontal Output Oscillator caused by the X Radiation protection Hold-Down Circuit. If, while the power is off, the power is switched on and any of these failures remains uncorrected, the CPU will shut off the power within three seconds. Check the following if the unit is turned off by the power failure detector. 1. Disconnect the AC power cord (120V AC line) for at least 10 seconds. 2. Connect a DC Voltmeter to the following TEST POINTS. TJ6 5V D429 Cathode 5V 3. Press the power key and check for the proper voltage supplies. 4. If any of these voltages is low, the power failure detector should turn the set off within three seconds. 5. Check all circuits listed above. Note:This unit is equipped with a Power Surge Protection feature included in the CPU. If power Failure occurs three times within 15 minutes, the CPU will automatically stop functioning to help prevent secondary damage. (TV will not turn on by pressing the power key.) To reset the operating programs within the CPU, disconnect the AC power cord for at least 10 seconds.

MECHANICAL DISASSEMBLIES Figure 2. Picture Tube Removal Figure 1. Cabinet Back Removal DEGAUSSING COIL DEGAUSSING COIL HOLDER DEGAUSSING COIL SOCKET To CRT unit ground PICTURE TUBE GROUND LEAD AV2 INPUT S-VIDEO VIDEO (MONO) AUDIO R L UHF / VHF / CATV 75Ω CABINET BACK REMOVAL 1. Refer to Figure 1, remove 8 screws. 2. Pull off cabinet back and remove. CHASSIS REMOVAL 1. Remove cabinet back. 2. Discharge the picture tube anode (2nd anode lead) to the dag coating (picture tube grounding lead). 3. Disconnect Degaussing coil socket (KD), Picture tube socket, Deflection yoke connector (KDY), Speaker connectors (KSP), and 2nd anode lead. 4. Remove chassis completely by sliding it straight back. PICTURE TUBE REMOVAL CAUTION: Do not disturb the deflection yoke or magnet assembly on the picture tube neck. Care must be taken to keep these assemblies intact, unless picture tube is being replaced . Discharge the picture tube to the coating before handling the tube. 1. Remove chassis, referring to Chassis Removal instructions. 2. Place cabinet’s front face down on the soft surface. 3. Remove the screw on each corner of the picture tube and GENTLY lift the picture tube out of the cabinet. 4. Install a replacement picture tube in reverse order. Properly install the degaussing coil and picture tube ground- ing lead on the picture tube. See Figure 2. Note: If the Picture Tube is being replaced, mount the Degaussing Coil on the picture tube. See Figure 2.

CHASSIS ELECTRICAL PARTS LIST CAPACITORS NOTES: Read description of the Capacitor as follows: (Example) CERAMIC 100P K 50V Rated Voltage Tolerance Symbols: less than 10PF A . .Not specified B . .±0.1PF C . .±0.25PF D . .±0.5PF F . .±1PF G . .±2PF R . .+0.25 - 0PF S . .+0 - 0.25PF E . .+0 - 1PF more than 10PF A . .Not specified B . .±0.1% C . .±0.25% D . .±0.5% F . .±1% G . .±2% H . .±3% J . .±5% K . .±10% L . .±15% M . .±20% N . .±30% P . .+100 - 0% Q . .+30 - 10% T . .+50 - 10% U . .+75 - 10% V . .+20 - 10% W .+100 - 10% X . .+40 - 20% Y . .+150 - 10% Z . .+80 - 20% Rated Value: P...Pico Farad U...Micro Farad Material: CERAMIC . . . . . .Ceramic MT-PAPER . . . . .Metalized Paper POLYESTER . . .Polyester MT-POLYEST . . .Metalized Polyester POLYPRO . . . . .Polypropylene MT-POLYPRO . .Metalized Polypropylene COMPO-FILM . .Composite Film MT-COMPO . . . .Metalized Composite STYRENE . . . . .Styrene TA-SOLID . . . . . .Tantalum Solid AL-SOLID . . . . . .Aluminum Solid ELECT . . . . . . . .Electrolytic NP-ELECT . . . . .Non-Polarized Electrolytic OS-SOLID . . . . .Aluminum Solid with Organic Semiconductive Electrolytic C001 403 048 1907 ELECT 0.22U M 50V C002 403 048 1907 ELECT 0.22U M 50V C003 403 155 2408 CERAMIC 5600P K 50V C004 403 155 2408 CERAMIC 5600P K 50V C006 403 215 2201 CERAMIC 0.01U K 50V C010 403 045 7803 ELECT 220U M 25V C011 403 045 7803 ELECT 220U M 25V C012 403 042 7707 ELECT 22U M 16V C015 403 043 6006 ELECT 330U M 16V C101 403 039 3507 ELECT 470U M 6.3V C103 403 215 2201 CERAMIC 0.01U K 50V C106 403 049 9803 ELECT 2.2U M 50V C131 403 049 0008 ELECT 1U M 50V C133 403 215 2201 CERAMIC 0.01U K 50V C134 403 113 3805 CERAMIC 1000P K 50V C136 401 105 7909 MT-GLAZE 0.000 ZA 1/16W C137 403 166 9205 CERAMIC 10P J 50V C141 403 215 2201 CERAMIC 0.01U K 50V C142 403 284 4304 CERAMIC 0.022U K 50V C143 403 215 2201 CERAMIC 0.01U K 50V C146 403 215 2201 CERAMIC 0.01U K 50V C147 403 038 1603 ELECT 100U M 6.3V C151 403 048 6308 ELECT 0.47U M 50V C153 403 048 6308 ELECT 0.47U M 50V C161 403 305 3507 CERAMIC 0.1U Z 50V C211 403 086 2300 NP-ELECT 1U M 50V C212 403 049 9803 ELECT 2.2U M 50V C221 403 086 2300 NP-ELECT 1U M 50V C251 401 105 7909 MT-GLAZE 0.000 ZA 1/16W C252 404 086 6602 POLYESTER 0.047U K 63V 403 062 0306 POLYESTER 0.047U K 50V 403 062 0504 POLYESTER 0.047U K 50V 403 179 0909 POLYESTER 0.047U K 50V C253 403 048 6308 ELECT 0.47U M 50V C256 403 049 0008 ELECT 1U M 50V C257 403 215 2201 CERAMIC 0.01U K 50V CAUTION: To Protect against electrical shock and for continued product safety, refer to SAFETY PRECAUTIONS, X-RADIATION PRECAUTION and PRODUCT SAFETY NOTICE on Page 2. Notes: Parts having Location Number are located on the following boards. Numbers under 700 Series . . . . . . . . . . . . . . . . . . . . . .On the Main Board. Numbers 700 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .On the Picture Tube Socket Board. Numbers 800 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .On the Main Board Numbers 900 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .Out of Board. Numbers 1000 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .On the Main Board. Numbers 1100 series . . . . . . . . . . . . . . . . . . . . . . . . . . .On the Main Board Numbers 1900 series . . . . . . . . . . . . . . . . . . . . . . . . . . .On the Main Board PRODUCT SAFETY NOTICE PRODUCT SAFETY SHOULD BE CONSIDERED WHEN A REPLACEMENT IS MADE IN ANY AREA OF A RECEIVER. COMPONENTS INDICATED BY A STAR (#) IN THIS PARTS LIST AND THE SCHEMATIC DIAGRAM DESIGNATE COMPONENTS IN WHICH SAFETY CAN BE OF SPECIAL SIGNIFICANCE. IT IS PARTICULARLY RECOMMENDED THAT ONLY PARTS DESIGNATED ON THE FOLLOWING PARTS LIST BE USED FOR COMPONENT REPLACEMENT DESIGNATED BY A STAR. NO DEVIATIONS FROM RESISTANCE, WATTAGE, AND VOLTAGE RATINGS MAY BE MADE FOR REPLACEMENT ITEMS DESIGNATED BY A STAR. Schematic Location Part No. Description Schematic Location Part No. Description Note: Schematic part location numbers may not always match with the part descriptions. The part descriptions are correct and should be used.

C258 403 044 1703 ELEC 470U M 16V C272 403 050 6600 ELECT 3.3U M 50V C274 403 041 8804 ELECT 10U M 16V C284 403 043 9106 ELECT 47U M 16V C285 403 215 2201 CERAMIC 0.01U K 50V C401 403 043 1902 ELECT 2200U M 16V C402 403 215 2201 CERAMIC 0.01U K 50V C403 404 086 6800 POLYESTER 6800P J 63V 403 063 0008 POLYESTER 6800P K 50V 403 063 0206 POLYESTER 6800P K 50V 403 179 0305 POLYESTER 6800P K 50V C404 403 157 3601 CERAMIC 100P J 50V C405 403 086 2300 NP-ELECT 1U M 50V C406 403 076 3607 CERAMIC 470P K 500V C407 403 075 9204 CERAMIC 1500P K 500V C408 403 055 0504 ELECT 1U M 160V #C411 404 077 4402 MT-POLYPRO 7200P H 1.5K 403 343 7901 MT-POLYPRO 7200P H 1.5K #C416 404 081 2401 MT-POLYPRO 0.22U M 200V 403 078 9805 MT-POLYPRO 0.22U J 200V 403 346 6901 MT-POLYPRO 0.22U J 250V 403 372 6609 MT-POLYPRO 0.22U J 250V C421 403 038 6301 ELECT 220U M 6.3V C427 403 215 2201 CERAMIC 0.01U K 50V C441 403 215 2201 CERAMIC 0.01U K 50V C471 403 044 1703 ELECT 470U M 16V C473 404 084 5706 MT-POLYEST 47U J 63V 403 166 7706 MT-POLYEST 0.47U J 63V 403 067 7805 MT-COMPO 0.47U J 50V 403 256 0808 MT-COMPO 0.47U J 50V C482 403 115 0802 ELECT 22U M 100V C484 403 051 0607 ELECT 4.7U M 50V C487 403 052 8503 ELECT 1000U M 35V C489 403 043 0202 ELECT 220U M 16V C493 404 056 5307 NP-ELECT 2.2U M 100V 404 045 6605 NP-ELECT 2.2U M 50V C497 403 038 1603 ELECT 100U M 6.3V C502 403 053 2104 ELECT 220U M 35V C503 403 049 9803 ELECT 2.2U M 50V C504 403 045 9807 ELECT 2200U M 25V C505 404 084 5706 MT-POLYEST 0.47U J 63V 403 166 7706 MT-POLYEST 0.47U J 63V 403 067 7805 MT-COMPO 0.47U J 50V 403 256 0808 MT-COMPO 0.47U J 50V C506 403 062 5103 POLYESTER 5600P K 50V 403 062 5301 POLYESTER 5600P K 50V 403 179 0701 POLYESTER 5600P K 50V C508 403 157 3106 CERAMIC 56P J 50V C509 404 084 5706 MT-POLYEST 0.47U J 63V 403 166 7706 MT-POLYEST 0.47U J 63V 403 067 7805 MT-COMPO 0.47U J 50V 403 256 0808 MT-COMPO 0.47U J 50V C510 403 215 2201 CERAMIC 0.01U K 50V #C511 403 260 2300 MT-COMPO 0.15U J 50V C516 403 041 8804 ELECT 10U M 16V #C601 404 071 2404 MT-POLYEST 0.22U K 250V 404 066 2204 MT-POLYEST 0.22U M 275V 404 088 8802 MT-POLYEST 0.22U M 275V C603 403 075 7101 CERAMIC 1000P K 500V C604 403 075 7101 CERAMIC 1000P K 500V C606 404 088 2909 CERAMIC 1000P M 250V 404 088 7102 CERAMIC 1000P M 250V C 608 403 222 1907 CERAMIC 2200P K 1K 403 263 6305 CERAMIC 2200P K 1K C609 404 075 5005 ELECT 470U M 200V 404 089 3509 ELECT 470U M 200V C612 404 084 5102 POLYESTER 0.1U K 63V 403 057 2803 POLYESTER 0.1U K 50V 403 057 3107 POLYESTER 0.1U K 50V 403 181 8207 POLYESTER 0.1U K 50V C613 404 086 6503 POLYESTER 0.047U J 63V 403 062 0306 POLYESTER 0.047U K 50V 403 062 0504 POLYESTER 0.047U K 50V 403 179 0909 POLYESTER 0.047U K 50V C614 404 084 5003 POLYESTER 0.01U J 63V 403 057 0403 POLYESTER 0.01U K 50V 403 057 0601 POLYESTER 0.01U K 50V 403 179 3801 POLYESTER 0.01U K 50V #C625 403 266 4902 CERAMIC 1200P K 1K C626 403 042 4805 ELECT 1000U M 16V C628 404 052 9309 ELECT 220U M 160V C629 403 043 0202 ELECT 220U M 16V #C631 404 088 2909 CERAMIC 1000P M 250V 404 088 7102 CERAMIC 1000P M 250V #C632 404 088 2909 CERAMIC 1000P M 250V 404 088 7102 CERAMIC 1000P M 250V C634 403 043 9106 ELECT 47U M 16V C683 403 043 0202 ELECT 220U M 16V C689 403 305 3507 CERAMIC 0.1U Z 50V C693 403 047 8402 ELECT 0.1U M 50V C701 403 146 0505 CERAMIC 1200P K 50V C711 403 113 3805 CERAMIC 1000P K 50V C721 403 113 3805 CERAMIC 1000P K 50V #C742 403 077 2807 CERAMIC 1000P Z 2K C801 403 215 2201 CERAMIC 0.01U K 50V C806 403 039 3507 ELECT 470U M 6.3V C809 403 157 3601 CERAMIC 100P J 50V C810 403 157 3601 CERAMIC 100P J 50V C811 403 049 0008 ELECT 1U M 50V C822 403 042 7707 ELECT 22U M 16V C829 403 049 0008 ELECT 1U M 50V C835 403 215 2201 CERAMIC 0.01U K 50V C841 403 305 3507 CERAMIC 0.1U Z 50V C842 403 305 3507 CERAMIC 0.1U Z 50V C843 403 305 3507 CERAMIC 0.1U Z 50V C853 403 047 8402 ELECT 0.1U M 50V C854 403 153 9300 CERAMIC 82P J 50V C856 403 049 0008 ELECT 1U M 50V C857 403 157 4202 CERAMIC 220P J 50V C858 403 113 3805 CERAMIC 1000P K 50V C862 403 215 2201 CERAMIC 0.01U K 50V C1001 403 041 8804 ELECT 10U M 16V C1002 403 041 8804 ELECT 10U M 16V C1051 403 042 7707 ELECT 22U M 16V C1052 403 215 2201 CERAMIC 0.01U K 50V C1059 403 041 8804 ELECT 10U M 16V C1071 403 215 2201 CERAMIC 0.01U K 50V C1080 403 305 3507 CERAMIC 0.1U Z 50V Schematic Location Part No. Description Schematic Location Part No. Description

C1081 403 041 8804 ELECT 10U M 16V C1902 403 041 8804 ELECT 10U M 16V C3401 403 047 8402 ELECT 0.1U M 50V C3404 403 086 0108 NP-ELECT 4.7U M 25V C3406 403 215 2300 CERAMIC 0.012U K 50V C3407 403 155 2408 CERAMIC 5600P K 50V C3408 403 048 6308 ELECT 0.47U M 50V C3411 403 048 6308 ELECT 0.47U M 50V C3412 403 043 9106 ELECT 47U M 16V C3413 403 051 0607 ELECT 4.7U M 50V C3414 403 042 2405 ELECT 100U M 16V C3416 403 086 0108 NP-ELECT 4.7U M 25V C3417 403 051 0607 ELECT 4.7U M 50V C3418 403 086 0108 NP-ELECT 4.7U M 25V C3421 403 157 7104 CERAMIC 2700P K 50V C3422 403 356 5109 CERAMIC 0.047U K 50V C3423 403 380 0002 TA-SOLID 3.3U K 10V C3424 403 086 0108 NP-ELECT 4.7U M 25V C3426 403 379 9900 TA-SOLID 10U K 10V C3427 403 049 0008 ELECT 1U M 50V C3431 403 155 2309 CERAMIC 4700P K 50V C3432 403 047 8402 ELECT 0.1U M 50V C3433 403 155 2309 CERAMIC 4700P K 50V C3434 403 284 4304 CERAMIC 0.022U K 50V C3436 403 086 0108 NP-ELECT 4.7U M 25V C3439 403 086 0108 NP-ELECT 4.7U M 25V C3441 403 051 0607 ELECT 4.7U M 50V C3442 403 051 0607 ELECT 4.7U M 50V C3447 403 051 0607 ELECT 4.7U M 50V C3448 403 051 0607 ELECT 4.7U M 50V DIODE D001 407 099 7000 ZENER DIODE MTZJ15B 407 054 5805 ZENER DIODE RD15EB2 408 047 4706 ZENER DIODE MTZJ15B D101 407 100 0204 ZENER DIODE MTZJ36A 407 056 2307 ZENER DIODE RD36EB1 408 047 6205 ZENER DIODE MTZJ36A D351 407 063 8606 ZENER DIODE MTZJ5.1A 407 056 7906 ZENER DIODE RD5.1EB1 408 047 6502 ZENER DIODE MTZJ5.1A D408 407 222 4401 ZENER DIODE 1Z150 #D421 407 158 1307 ZENER DIODE HZ11B2L #D422 407 158 1307 ZENER DIODE HZ11B2L D428 407 099 7109 ZENER DIODE MTZJ15C 407 054 5904 ZENER DIODE RD15EB3 D429 408 008 2406 DIODE 1N4148 407 013 4306 DIODE 1S2076A 407 013 7109 DIODE 1S2473 D471 407 006 4108 DIODE ERB44-04 407 007 7603 DIODE EU2 D481 407 124 6404 DIODE ERA18-04 407 007 6606 DIODE ES1 407 124 5506 DIODE RMPG06G D482 407 011 4407 DIODE TVR1G D483 407 124 6404 DIODE ERA18-04 407 007 6606 DIODE ES1 407 124 5506 DIODE RMPG06G D486 407 099 6102 ZENER DIODE MTZJ10B 407 054 0008 ZENER DIODE RD10EB2 408 047 2306 ZENER DIODE MTZJ10B-52 D487 407 005 7308 DIODE EM01Z 407 005 8602 DIODE ERA15-02 407 088 6502 DIODE MPG06D 407 011 3004 DIODE S5277B 408 009 9404 DIODE 1N4002ID D490 407 063 8903 ZENER DIODE MTZJ5.6C 407 057 0104 ZENER DIODE RD5.6EB3 408 047 7707 ZENER DIODE MTZJ5.6C D501 407 005 7308 DIODE EM01Z 407 005 8602 DIODE ERA15-02 407 088 6502 DIODE MPG06D 407 011 3004 DIODE S5277B 408 009 9404 DIODE 1N4002ID D502 407 118 2207 ZENER DIODE 1Z75 D503 407 100 0303 ZENER DIODE MTZJ36B 407 056 2406 ZENER DIODE RD36EB2 408 047 6205 ZENER DIODE MTZJ36A #D601 407 005 7605 DIODE EM2B 408 008 8606 DIODE GP15G 407 013 3200 DIODE 1S1887A #D602 407 005 7605 DIODE EM2B 408 008 8606 DIODE GP15G 407 013 3200 DIODE 1S1887A #D603 407 005 7605 DIODE EM2B 408 008 8606 DIODE GP15G 407 013 3200 DIODE 1S1887A #D604 407 005 7605 DIODE EM2B 408 008 8606 DIODE GP15G 407 013 3200 DIODE 1S1887A D611 408 008 2406 DIODE 1N4148 407 013 4306 DIODE 1S2076A 407 013 7109 DIODE 1S2473 #D612 407 147 5705 PHOTO COUPLE ON3131S 407 104 2402 PHOTO COUPLE PC817C 407 106 6101 PHOTO COUPLE PC817D 407 175 9904 PHOTO COUPLE TLP621-1-BL D613 407 063 9702 ZENER DIODE MTZJ9.1C 407 057 9800 ZENER DIODE RD9.1EB3 D614 407 006 0100 DIODE ERA91-02 #D624 407 106 2806 DIODE RU3YX #D625 407 211 5808 DIODE FE201-6L43 407 129 7000 DIODE RU4AM LF-L1 D627 408 008 2406 DIODE 1N4148 407 013 4306 DIODE 1S2076A 407 013 7109 DIODE 1S2473 D629 407 099 7208 ZENER DIODE MTZJ16A 407 054 7007 ZENER DIODE RD16EB1 D680 408 008 2406 DIODE 1N4148 407 013 4306 DIODE 1S2076A 407 013 7109 DIODE 1S2473 D683 408 008 2406 DIODE 1N4148 407 013 4306 DIODE 1S2076A 407 013 7109 DIODE 1S2473 D693 407 099 5501 ZENER DIODE MTZJ6.2C 407 057 2801 ZENER DIODE RD6.2EB3 D801 408 008 2406 DIODE 1N4148 Schematic Location Part No. Description Schematic Location Part No. Description

407 013 4306 DIODE 1S2076A 407 013 7109 DIODE 1S2473 D831 407 222 5903 ZD UDZS3.6B-TE-17 D834 407 099 7109 ZENER DIODE MTZJ15C 407 054 5904 ZENER DIODE RD15EB3 408 047 4706 ZENER DIODE MTZJ15B D836 408 008 2406 DIODE 1N4148 407 013 4306 DIODE 1S2076A 407 013 7109 DIODE 1S2473 D843 408 008 2406 DIODE 1N4148 407 013 4306 DIODE 1S2076A 407 013 7109 DIODE 1S2473 D1001 07 099 6102 ZENER DIODE MTZJ10B 407 054 0008 ZENER DIODE RD10EB2 408 047 2306 ZENER DIODE MTZJ10B-52 D1002 407 099 6102 ZENER DIODE MTZJ10B 407 054 0008 ZENER DIODE RD10EB2 408 047 2306 ZENER DIODE MTZJ10B-52 D1051 407 099 6102 ZENER DIODE MTZJ10B 407 054 0008 ZENER DIODE RD10EB2 408 047 2306 ZENER DIODE MTZJ10B-52 D1052 407 099 6102 ZENER DIODE MTZJ10B 407 054 0008 ZENER DIODE RD10EB2 408 047 2306 ZENER DIODE MTZJ10B-52 D1059 407 206 5608 ZENER DIODE UDZS-TE-1710B D1901 407 099 5600 ZENER DIODE MTZJ6.8A 407 057 4003 ZENER DIODE RD6.8EB1 408 047 8605 ZENER DIODE MTZJ6.8A D1902 407 099 6102 ZENER DIODE MTZJ10B 407 054 0008 ZENER DIODE RD10EB2 408 047 2306 ZENER DIODE MTZJ10B-52 INTEGRATED CIRCUITS IC001 409 275 7903 IC LA4525 #IC101 409 491 4809 IC LA76834NM-TBM #IC501 409 449 4103 IC LA78040 #IC601 409 172 8102 IC SE130NH IC681 409 241 8309 IC TA78L05S 409 066 7303 IC UPC78L05J IC801 410 418 8602 IC M37272M6-542FP T4 IC802 409 495 6908 IC CAT24WC02P 409 440 8902 IC M24C02-BN6 409 376 1503 IC ST24C02B6 409 528 8404 IC S524A40X21-DCB0 409 497 0706 IC S524C20D21-DCB0 409 333 3700 IC 24LC02B/P IC1081 409 051 3006 IC TC4053BP IC3401 409 467 1108 IC CXA2134Q-T6 COIL #LF601 645 012 0589 LINE FILTER 645 042 7510 LINE FILTER 645 052 6862 LINE FILTER L164 645 003 9713 INDUCTOR,15U K 645 016 2657 INDUCTOR,15U K L401 645 036 4198 INDUCTOR,1.0U,FILTER L404 645 003 9676 INDUCTOR,100U K 645 016 2565 INDUCTOR,100U K L413 645 036 7441 COIL,LINEARITY L602 645 005 0763 CORE,PIPE L623 652 000 1725 CORE PIPE L625 652 000 1725 CORE PIPE L801 645 008 2894 INDUCTOR,5.6U K 645 016 3098 INDUCTOR,5.6U K L811 645 006 2490 INDUCTOR,1U K 645 016 2404 INDUCTOR,1U K L812 645 006 2490 INDUCTOR,1U K 645 016 2404 INDUCTOR,1U K L821 645 008 2894 INDUCTOR,5.6U K 645 016 3098 INDUCTOR,5.6U K L851 645 008 2894 INDUCTOR,5.6U K 645 016 3098 INDUCTOR,5.6U K #L901 645 059 7763 COIL,DEGAUSSING L1901 645 008 2894 INDUCTOR,5.6U K 645 016 3104 INDUCTOR,5.6U K TRANSISTOR Q001 405 011 8401 TR 2SC1740S-Q 405 011 8500 TR 2SC1740S-R 405 011 8609 TR 2SC1740S-S 405 012 2002 TR 2SC1815-GR 405 012 2101 TR 2SC1815-O 405 012 2309 TR 2SC1815-Y 405 157 0505 TR 2SC536NF-NPA 405 151 8705 TR 2SC536NG-NPA 405 020 7501 TR 2SC945A-PA 405 020 7709 TR 2SC945A-QA 405 020 7907 TR 2SC945A-RA Q005 405 008 4805 TR 2SB764-E 405 008 4904 TR 2SB764-F Q135 405 011 8401 TR 2SC1740S-Q 405 011 8500 TR 2SC1740S-R 405 011 8609 TR 2SC1740S-S 405 012 2002 TR 2SC1815-GR 405 012 2101 TR 2SC1815-O 405 012 2309 TR 2SC1815-Y 405 157 0505 TR 2SC536NF-NPA 405 151 8705 TR 2SC536NG-NPA 405 020 7501 TR 2SC945A-PA 405 020 7709 TR 2SC945A-QA 405 020 7907 TR 2SC945A-RA Q202 406 000 6804 TR 2SA1015-G(SAN)-TPE2 405 001 7407 TR 2SA1015-O(SAN) 405 001 7605 TR 2SA1015-Y(SAN) 405 004 3109 TR 2SA564A-Q(CU) 405 004 3208 TR 2SA564A-R(CU) 405 151 3304 TR 2SA608NF-NPA 405 006 1707 TR 2SA933S-Q 05 006 1806 TR 2SA933S-R Q208 406 000 6804 TR 2SA1015-G(SAN)-TPE2 405 001 7407 TR 2SA1015-O(SAN) 405 001 7605 TR 2SA1015-Y(SAN) 405 004 3109 TR 2SA564A-Q(CU) 405 004 3208 TR 2SA564A-R(CU) 405 151 3304 TR 2SA608NF-NPA 405 006 1707 TR 2SA933S-Q 405 006 1806 TR 2SA933S-R Q401 405 029 7106 TR 2SC2271-D Schematic Location Part No. Description Schematic Location Part No. Description

405 013 6207 TR 2SC2271-D-CTV 405 029 7205 TR 2SC2271-E 405 013 6306 TR 2SC2271-E-CTV #Q402 405 157 1304 TR 2SD2634-YB Q486 405 023 5009 TR 2SD400-E-MP 405 023 5306 TR 2SD400-F-MP Q490 405 023 5009 TR 2SD400-E-MP 405 023 5306 TR 2SD400-F-MP #Q601 405 166 7601 TR 2SK2872 Q611 405 013 6801 TR 2SC2274-E 405 013 7006 TR 2SC2274-F Q612 405 006 6504 TR 2SA984-E 405 006 6702 TR 2SA984-F Q613 405 013 6801 TR 2SC2274-E 405 013 7006 TR 2SC2274-F Q627 405 089 0000 TR 2SA1707-S 405 089 0109 TR 2SA1707-T 405 009 6907 TR 2SB985-S 405 009 7003 TR 2SB985-T Q635 405 011 8401 TR 2SC1740S-Q 405 011 8500 TR 2SC1740S-R 405 011 8609 TR 2SC1740S-S 405 012 2002 TR 2SC1815-GR 405 012 2101 TR 2SC1815-O 405 012 2309 TR 2SC1815-Y 405 157 0505 TR 2SC536NF-NPA 405 151 8705 TR 2SC536NG-NPA 405 020 7501 TR 2SC945A-PA 405 020 7709 TR 2SC945A-QA 405 020 7907 TR 2SC945A-RA Q681 405 011 8401 TR 2SC1740S-Q 405 011 8500 TR 2SC1740S-R 405 011 8609 TR 2SC1740S-S 405 012 2002 TR 2SC1815-GR 405 012 2101 TR 2SC1815-O 405 012 2309 TR 2SC1815-Y 405 157 0505 TR 2SC536NF-NPA 405 151 8705 TR 2SC536NG-NPA 405 020 7501 TR 2SC945A-PA 405 020 7709 TR 2SC945A-QA 405 020 7907 TR 2SC945A-RA Q693 405 011 8401 TR 2SC1740S-Q 405 011 8500 TR 2SC1740S-R 405 011 8609 TR 2SC1740S-S 405 012 2002 TR 2SC1815-GR 405 012 2101 TR 2SC1815-O 405 012 2309 TR 2SC1815-Y 405 157 0505 TR 2SC536NF-NPA 405 151 8705 TR 2SC536NG-NPA 405 020 7501 TR 2SC945A-PA 405 020 7709 TR 2SC945A-QA 405 020 7907 TR 2SC945A-RA Q695 406 000 6804 TR 2SA1015-G(SAN)-TPE2 405 001 7605 TR 2SA1015-Y(SAN) 405 004 3208 TR 2SA564A-R(CU) 405 004 4809 TR 2SA608-F-CTV-NP 405 151 3304 TR 2SA608NF-NPA Q701 406 000 3605 TR 2SC3620(LB-SAN-1) 405 066 4304 TR 2SC2621-C-RA 405 041 6507 TR 2SC2621-D-RA 405 041 6705 TR 2SC2621-E-RA 405 066 9903 TR 2SC2688(1)-K 405 067 0008 TR 2SC2688(1)-L 405 067 0107 TR 2SC2688(1)-M Q711 406 000 3605 TR 2SC3620(LB-SAN-1) 405 066 4304 TR 2SC2621-C-RA 405 041 6507 TR 2SC2621-D-RA 405 041 6705 TR 2SC2621-E-RA 405 066 9903 TR 2SC2688(1)-K 405 067 0008 TR 2SC2688(1)-L 405 067 0107 TR 2SC2688(1)-M Q721 406 000 3605 TR 2SC3620(LB-SAN-1) 405 066 4304 TR 2SC2621-C-RA 405 041 6507 TR 2SC2621-D-RA 405 041 6705 TR 2SC2621-E-RA 405 066 9903 TR 2SC2688(1)-K 405 067 0008 TR 2SC2688(1)-L 405 067 0107 TR 2SC2688(1)-M Q831 405 134 5905 TR 2SA1037AK-T146-R 405 147 2205 TR 2SA1037AK-S-T146 405 002 0308 TR 2SA1037K T146 R 405 002 0407 TR 2SA1037K T146 S 405 002 6706 TR 2SA1179-M6-TB 405 002 6904 TR 2SA1179-M7-TB 405 163 1503 TR 2SA1179N-M6-TB 405 163 2708 TR 2SA1179N-M7-TB 405 173 9605 TR 2SA1235A1E 405 173 9704 TR 2SA1235A1F Q1071 406 000 6804 TR 2SA1015-G(SAN)-TPE2 405 001 7407 TR 2SA1015-O(SAN) 405 001 7605 TR 2SA1015-Y(SAN) 405 004 3109 TR 2SA564A-Q(CU) 405 004 3208 TR 2SA564A-R(CU) 405 151 3304 TR 2SA608NF-NPA 405 006 1707 TR 2SA933S-Q 405 006 1806 TR 2SA933S-R Schematic Location Part No. Description Schematic Location Part No. Description

R001 401 105 1105 MT-GLAZE 12K JA 1/16W R002 401 105 1105 MT-GLAZE 12K JA 1/16W R003 401 105 0504 MT-GLAZE 1K JA 1/16W R004 401 105 0504 MT-GLAZE 1K JA 1/16W R005 401 105 0603 MT-GLAZE 10K JA 1/16W R006 401 014 4105 CARBON 1.5K JA 1/4W R013 401 027 2600 CARBON 5.6K JA 1/6W #R106 401 008 2001 CARBON 18K JA 1/2W R107 401 023 2802 CARBON 8.2K JA 1/4W R131 401 105 4205 MT-GLAZE 33K JA 1/16W R133 401 105 3703 MT-GLAZE 3K JA 1/16W R135 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R137 401 105 0504 MT-GLAZE 1K JA 1/16W R142 401 105 4205 MT-GLAZE 33K JA 1/16W R143 401 105 0504 MT-GLAZE 1K JA 1/16W R151 401 105 4007 MT-GLAZE 330 JA 1/16W R161 401 105 0702 MT-GLAZE 100K JA 1/16W R162 401 105 0702 MT-GLAZE 100K JA 1/16W R163 401 105 0900 MT-GLAZE 120 JA 1/16W R164 401 105 0504 MT-GLAZE 1K JA 1/16W R166 401 105 4502 MT-GLAZE 390 JA 1/16W R167 401 105 1907 MT-GLAZE 180 JA 1/16W R201 401 026 9600 CARBON 470 JA 1/6W R208 401 105 0504 MT-GLAZE 1K JA 1/16W R209 401 105 0405 MT-GLAZE 100 JA 1/16W R212 401 105 6704 MT-GLAZE 680K JA 1/16W R251 401 105 2904 MT-GLAZE 22K JA 1/16W R252 401 025 8208 CARBON 22K JA 1/6W R272 401 105 6605 MT-GLAZE 6.8K JA 1/16W R273 401 105 0603 MT-GLAZE 10K JA 1/16W R274 401 105 6001 MT-GLAZE 5.6K JA 1/16W R276 401 024 9701 CARBON 12K JA 1/6W R281 401 105 0603 MT-GLAZE 10K JA 1/16W R284 401 026 9303 CARBON 47 JA 1/6W R287 401 105 0405 MT-GLAZE 100 JA 1/16W R288 401 105 0405 MT-GLAZE 100 JA 1/16W R289 401 105 0405 MT-GLAZE 100 JA 1/16W R321 401 105 0603 MT-GLAZE 10K JA 1/16W R353 401 024 7400 CARBON 10K JA 1/6W R400 401 024 6700 CARBON 100 JA 1/6W #R401 401 012 4503 CARBON 100 JA 1/4W #R402 401 013 4205 CARBON 120 JA 1/4W R404 401 026 9303 CARBON 47 JA 1/6W R405 401 105 6001 MT-GLAZE 5.6K JA 1/16W R406 401 011 6102 CARBON 8.2K JA 1/2W #R407 401 069 8202 OXIDE-MT 8.2K JA 2W #R411A 402 068 5001 WIRE WOUND 6.8 KA 7W 402 076 0401 WIRE WOUND 6.8 KA 7W R413 401 058 3706 OXIDE-MT 1K JA 1W R416 401 026 3707 CARBON 33 JA 1/6W #R421 401 053 1202 MT-FILM 2.2K FA 1/6W #R422 401 052 6802 MT-FILM 10K FA 1/6W #R423 401 217 3905 MT-GLAZE 3.3K FA 1/16W R426 401 105 6506 MT-GLAZE 680 JA 1/16W R428 401 025 1902 CARBON 15K JA 1/6W R430 401 024 7004 CARBON 1K JA 1/6W R441 401 024 7004 CARBON 1K JA 1/6W R442 401 105 0603 MT-GLAZE 10K JA 1/16W R443 401 026 9907 CARBON 4.7K JA 1/6W R444 401 025 4606 CARBON 18K JA 1/6W R449 401 203 9904 MT-GLAZE 4.7K FA 1/16W #R471 401 006 7701 CARBON 1 JB 1/2W #R472 401 069 5607 OXIDE-MT 8.2 JA 2W #R481 401 010 2600 CARBON 47 JB 1/2W #R482 401 011 9004 CARBON 1 JB 1/4W #R483 401 006 7701 CARBON 1 JB 1/2W R485 401 025 4606 CARBON 18K JA 1/6W #R486 401 069 5607 OXIDE-MT 8.2 JA 2W R487 401 026 6609 CARBON 390 JA 1/6W #R488 401 059 1602 OXIDE-MT 15 JA 1W #R489 401 066 5204 OXIDE-MT 22 JA 2W R491 401 012 5708 CARBON 1K JA 1/4W R492 401 156 8504 MT-FILM 33K FA 1/6W R493 401 019 4001 CARBON 390K JA 1/4W R494 401 018 5801 CARBON 330K JA 1/4W #R495 401 061 1706 OXIDE-MT 33 JA 1W #R497 401 068 1501 OXIDE-MT 4.7 JA 2W R499 401 026 6609 CARBON 390 JA 1/6W R503 401 026 7002 CARBON 3.9K JA 1/6W R504 401 027 2600 CARBON 5.6K JA 1/6W R505 401 006 8104 CARBON 1.2 JA 1/2W R506 401 027 8305 CARBON 820 JA 1/6W R507 401 006 7602 CARBON 1 JA 1/2W R508 401 024 9701 CARBON 12K JA 1/6W R509 401 027 5502 CARBON 6.8K JA 1/6W #R511 401 065 2808 OXIDE-MT 120 JA 2W R517 401 025 4606 CARBON 18K JA 1/6W R518 401 105 2102 MT-GLAZE 18K JA 1/16W #R601 402 083 6106 WIRE WOUND 1 KA 7W Schematic Location Part No. Description Schematic Location Part No. Description RESISTORS NOTES: Read description of the Resistor as follows: (Example) CARBON 4.7K J A 1/4W Rated Wattage Performance Symbols: A..General B...Non-flammable Z...Low noise Other...Temperature coefficient Tolerance Symbols: A...0.05%B...0.1% C...0.25% D...0.5% F...1% G...2% J...5% K...10% M...20% P...+5 -15% Rated Value, ohms: K...1,000 M...1,000,000 Material: CARBON . . . . . . . .Carbon MT-FILM . . . . . . . .Metal Film OXIDE-MT . . . . . . .Oxide Metal Film SOLID . . . . . . . . . .Composition MT-GLAZE . . . . . .Metal Glaze WIRE WOUND . . .Wire Wound CERAMIC RES . . .Ceramic FUSIBLE RES . . . .Fusible

Schematic Location Part No. Description Schematic Location Part No. Description #R602 402 000 1603 SOLID 3.3M MA 1/2W 402 088 1502 RESISTER 3.3M JA 1/2W R603 401 010 9203 CARBON 560K JA 1/2W #R604 401 066 3002 OXIDE-MT 2.2 JA 2W R606 401 019 9709 CARBON 47 JB 1/4W R607 401 016 1508 CARBON 22 JA 1/4W R608 401 105 5509 MT-GLAZE 470K JA 1/16W R609 401 105 2904 MT-GLAZE 22K JA 1/16W R611 401 027 0309 CARBON 47K JA 1/6W #R612 402 001 8502 FUSIBLE RES 10 J- 1/2W #R613 401 180 8402 OXIDE-MT 0.47 JA 2W R614 401 020 0900 CARBON 470 JB 1/4W #R615 401 180 8402 OXIDE-MT 0.47 JA 2W R616 401 105 0603 MT-GLAZE 10K JA 1/16W R617 402 001 8106 FUSIBLE RES 680 J- 1/4W R618 401 012 5807 CARBON 1K JB 1/4W R619 401 105 2904 MT-GLAZE 22K JA 1/16W R627 401 105 0603 MT-GLAZE 10K JA 1/16W R628 401 013 5301 CARBON 1.2K JA 1/4W R629 401 105 0504 MT-GLAZE 1K JA 1/16W #R630 401 060 5002 OXIDE-MT 22K JA 1W R631 401 022 3107 CARBON 6.8K JA 1/4W R632 401 105 0504 MT-GLAZE 1K JA 1/16W R634 401 027 0309 CARBON 47K JA 1/6W R683 401 026 9907 CARBON 4.7K JA 1/6W R691 401 105 0603 MT-GLAZE 10K JA 1/16W R692 401 027 5908 CARBON 68K JA 1/6W R693 401 105 6100 MT-GLAZE 560K JA 1/16W R694 401 024 7400 CARBON 10K JA 1/6W R695 401 105 2904 MT-GLAZE 22K JA 1/16W R701 401 025 3807 CARBON 180 JA 1/6W R703 401 105 7305 MT-GLAZE 820 JA 1/16W R704 401 027 8107 CARBON 82 JA 1/6W R706 401 009 1508 CARBON 2.7K JA 1/2W R707 401 065 4604 OXIDE-MT 12K JA 2W R711 401 025 3807 CARBON 180 JA 1/6W R713 401 105 7305 MT-GLAZE 820 JA 1/16W R714 401 105 7206 MT-GLAZE 82 JA 1/16W R716 401 009 1508 CARBON 2.7K JA 1/2W #R717 401 065 4604 OXIDE-MT 12K JA 2W R721 401 025 3807 CARBON 180 JA 1/6W R723 401 105 7305 MT-GLAZE 820 JA 1/16W R724 401 027 8107 CARBON 82 JA 1/6W R726 401 009 1508 CARBON 2.7K JA 1/2W #R727 401 065 4604 OXIDE-MT 12K JA 2W R803 401 024 6700 CARBON 100 JA 1/6W R804 401 024 6700 ARBON 100 JA 1/6W R806 401 105 5301 MT-GLAZE 4.7K JA 1/16W R807 401 105 0603 MT-GLAZE 10K JA 1/16W R808 401 105 0603 MT-GLAZE 10K JA 1/16W R809 401 105 5301 MT-GLAZE 4.7K JA 1/16W R810 401 105 2904 MT-GLAZE 22K JA 1/16W R813 401 105 0603 MT-GLAZE 10K JA 1/16W R814 401 105 0603 MT-GLAZE 10K JA 1/16W R816 401 105 4007 MT-GLAZE 330 JA 1/16W R823 401 024 6700 CARBON 100 JA 1/6W R829 401 024 6700 CARBON 100 JA 1/6W R831 401 105 0702 MT-GLAZE 100K JA 1/16W R833 401 024 7400 CARBON 10K JA 1/6W R835 401 105 3307 MT-GLAZE 2.7K JA 1/16W R842 401 105 5905 MT-GLAZE 560 JA 1/16W R843 401 105 5905 MT-GLAZE 560 JA 1/16W R844 401 105 5905 MT-GLAZE 560 JA 1/16W R846 401 024 7004 CARBON 1K JA 1/6W R847 401 027 2600 CARBON 5.6K JA 1/6W R848 401 027 2600 CARBON 5.6K JA 1/6W R849 401 027 2600 CARBON 5.6K JA 1/6W R851 401 105 0504 MT-GLAZE 1K JA 1/16W R852 401 105 4700 MT-GLAZE 39K JA 1/16W R853 401 105 8005 MT-GLAZE 1M JA 1/16W R854 401 105 2805 MT-GLAZE 2.2K JA 1/16W R856 401 024 6700 CARBON 100 JA 1/6W R857 401 024 6700 CARBON 100 JA 1/6W R858 401 105 2904 MT-GLAZE 22K JA 1/16W R862 401 105 0405 MT-GLAZE 100 JA 1/16W R864 401 105 1204 MT-GLAZE 120K JA 1/16W R881 401 105 0405 MT-GLAZE 100 JA 1/16W R882 401 105 0405 MT-GLAZE 100 JA 1/16W R883 401 024 6700 CARBON 100 JA 1/6W R884 401 024 6700 CARBON 100 JA 1/6W R886 401 105 0603 MT-GLAZE 10K JA 1/16W R1001 401 113 4402 MT-GLAZE 75 JA 1/16W R1002 401 113 4402 MT-GLAZE 75 JA 1/16W R1003 401 105 0603 MT-GLAZE 10K JA 1/16W R1004 401 105 3406 MT-GLAZE 27K JA 1/16W R1006 401 105 0603 MT-GLAZE 10K JA 1/16W R1007 401 105 3406 MT-GLAZE 27K JA 1/16W R1051 401 113 4402 MT-GLAZE 75 JA 1/16W R1052 401 113 4402 MT-GLAZE 75 JA 1/16W R1053 401 024 7400 CARBON 10K JA 1/6W R1054 401 026 1307 CARBON 27K JA 1/6W R1059 401 024 7004 CARBON 1K JA 1/6W R1071 401 026 6609 CARBON 390 JA 1/6W R1073 401 024 6700 CARBON 100 JA 1/6W R1081 401 105 2904 MT-GLAZE 22K JA 1/16W R1082 401 105 2904 MT-GLAZE 22K JA 1/16W R1083 401 105 3406 MT-GLAZE 27K JA 1/16W R1084 401 105 0603 MT-GLAZE 10K JA 1/16W R1901 401 105 0603 MT-GLAZE 10K JA 1/16W R1902 401 105 0504 MT-GLAZE 1K JA 1/16W R1903 401 025 4200 ARBON 1.8K JA 1/6W R1904 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R1905 401 105 2805 MT-GLAZE 2.2K JA 1/16W R1906 401 105 4601 MT-GLAZE 3.9K JA 1/16W R1907 401 105 6001 MT-GLAZE 5.6K JA 1/16W R1908 401 105 1105 MT-GLAZE 12K JA 1/16W R1909 401 024 7004 CARBON 1K JA 1/6W R1910 401 024 7004 CARBON 1K JA 1/6W R3401 401 105 2706 MT-GLAZE 220 JA 1/16W R3402 401 105 2706 MT-GLAZE 220 JA 1/16W R3406 401 105 0702 MT-GLAZE 100K JA 1/16W R3407 401 105 8005 MT-GLAZE 1M JA 1/16W R3411 401 236 4303 MT-GLAZE 62K FA 1/16W R3421 401 105 4106 MT-GLAZE 3.3K JA 1/16W R3422 401 105 3703 MT-GLAZE 3K JA 1/16W R3426 401 105 4601 MT-GLAZE 3.9K JA 1/16W R3441 401 105 4304 MT-GLAZE 330K JA 1/16W R3442 401 105 0405 MT-GLAZE 100 JA 1/16W

Schematic Location Part No. Description Schematic Location Part No. Description R3443 401 105 4304 MT-GLAZE 330K JA 1/16W R3444 401 105 0405 MT-GLAZE 100 JA 1/16W R3445 401 105 4304 MT-GLAZE 330K JA 1/16W R3446 401 105 0405 MT-GLAZE 100 JA 1/16W R3447 401 105 4304 MT-GLAZE 330K JA 1/16W R3448 401 105 0405 MT-GLAZE 100 JA 1/16W SWITCHES SW1901 645 003 4701 SWITCH,PUSH 1P-1TX1 645 019 4887 SWITCH,PUSH 1P-1TX1 645 027 7382 SWITCH,PUSH 1P-1TX1 SW1903 645 003 4701 SWITCH,PUSH 1P-1TX1 645 019 4887 SWITCH,PUSH 1P-1TX1 645 027 7382 SWITCH,PUSH 1P-1TX1 SW1904 645 003 4701 SWITCH,PUSH 1P-1TX1 645 019 4887 SWITCH,PUSH 1P-1TX1 645 027 7382 SWITCH,PUSH 1P-1TX1 SW1905 645 003 4701 SWITCH,PUSH 1P-1TX1 645 019 4887 SWITCH,PUSH 1P-1TX1 645 027 7382 SWITCH,PUSH 1P-1TX1 SW1906 645 003 4701 SWITCH,PUSH 1P-1TX1 645 019 4887 SWITCH,PUSH 1P-1TX1 645 027 7382 SWITCH,PUSH 1P-1TX1 SW1907 645 003 4701 SWITCH,PUSH 1P-1TX1 645 019 4887 SWITCH,PUSH 1P-1TX1 645 027 7382 SWITCH,PUSH 1P-1TX1 TRANSFORMER T151 645 049 3775 TRANS,OSC 45.75MHZ T401 652 000 1442 TRANS,DRIVE #T402 645 060 1224 TRANS,FLYBACK #T601 645 051 2384 TRANS,POWER,PULSE 645 051 4951 TRANS,POWER,PULSE CRYSTAL/FILTERS X141 421 008 9008 SAW F TSF5235P X161 610 015 2991 TRAP,CERAMIC 4.5MHZ 610 015 3059 TRAP,CERAMIC 4.5MHZ 645 041 1618 TRAP CERAMIC 4.5 MHZ X251 610 204 4195 CRYSTAL OSCILLATOR 610 245 9746 CRYSTAL OSCILLATOR 610 012 0655 CRYSTAL OSCILLATOR 645 050 4464 OSC,CRYSTAL 3.58MHZ X801 645 000 6692 OSC,CERAMIC 8.00MHZ 645 021 5483 OSC,CERAMIC 8.00MHZ MISCELLANEOUS A100 610 306 8190 ASSY,PWB,MAIN C3RK #A101 645 053 7936 TUNER,U/V 645 052 6077 TUNER,U/V 645 052 6084 TUNER,U/V A200 610 306 8213 ASSY,PWB,CTV C3RK A700 610 306 8206 ASSY,PWB,CRT C3RK A1901 645 047 6228 UNIT,REMOCON RECEIVER #F601 423 029 8008 FUSE 125V 4A 423 018 8101 FUSE 125V 4A 423 007 1601 FUSE 125V 4A 423 007 1809 FUSE 125V 4A F601A 645 040 3576 HOLDER,FUSE F601B 645 040 3576 HOLDER,FUSE #K701 645 040 0056 SOCKET,CRT 9P K1001 645 006 3787 JACK,RCA-3 K1011 645 054 9885 JACK,RCA-3 K1051 645 007 1584 SOCKET,DIN 4P #PS601 408 046 5209 TH PTDAA1BF3R0Q100 #Q901 414 012 1601 CRT ASSY A51QDX992X003 Q901A 645 008 8674 MAGNET,CG.PR 610 003 1739 CG PURITY MAGNET Q901B1 610 233 7891 DY SPACER E2HA 610 290 4154 DY SPACER-F8LZ Q901B2 610 233 7891 DY SPACER E2HA 610 290 4154 DY SPACER-F8LZ Q901B3 610 233 7891 DY SPACER E2HA 610 290 4154 DY SPACER-F8LZ #RL601 645 000 4155 RELAY 645 011 2713 RELAY 645 024 7828 RELAY 645 015 8629 RELAY 645 024 7767 RELAY 645 052 5933 RELAY SP901 652 001 0888 SPEAKER,8 SP902 652 001 0888 SPEAKER,8 #W601 645 059 5370 CORD,POWER-2.0MK #W902 610 305 3974 ASSY,WIRE GND CONECTOR C3

CABINET PARTS LIST 1 610 286 4977 ASSY, BUTTON POWER-C2GA 610 286 7770 SPRING COIL-C2GA 2 610 305 0447 DEC IND-C3RK 3 610 305 0188 ASSY, BUTTON UNIT-C3RK 4 610 305 0270 ASSY, CABINET FRONT-C3RK 4-a 610 305 0348 CABINET FRONT-C3RK 4-b 610 305 7392 DOOR-C3RK 5 610 284 7741 DOOR COVER-C2SA 6 610 305 0454 DEC SHEET DOOR-C3RK 7 645 041 7269 BADGE, SANYO 8 610 305 0393 CABINET BACK-C3RK 9 610 305 0652 LABEL RATING-C3RK 10 610 256 7670 HOLDER AC CORD-SGP-D4VA 11 645 059 0252 ASSY, RC TRANSMITTER-JXMRF 12 610 297 3723 RC-BATTERY COVER-JXMRA 610 305 0614 OWNER,S MANUAL-C3RK CABINET PARTS LIST KEY NO. PARTS NO. DESCRIPTION ACCESSORY PARTS LIST KEY NO. PARTS NO. DESCRIPTION - + CH MENU VOL POWER AV2 INPUT S-VIDEO VIDEO (MONO) AUDIO R L UHF / VHF / CATV 75Ω 1 2 3 7 8 10 4-a 4-b 5 9 JXMRF 1- - RESET RECALL INPUT CH SLEEP V-GUIDE SURROUND MUTE POWER DISPLAY CAPTION MENU CH VOL VOL 12 11 6 L-AUDIO-R AV1 INPUT - VIDEO -

COMPONENT AND TESTPOINT LOCATIONS 4A 125V CAUTION FOR CONTINUED PROTECTION AGAINST A RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE 4A, 125V FUSE. ATTENTION: POUR MAINTENIR LA PROTECTION CONTRE LES RISQUES D’ INCENDIE UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE 4A, 125V. MAIN BOARD PARTS SIDE DIP 1 E E E 1 2 3 E E E E E 1 4 5 8 E E E E E 5 E 1 9 8 16 1 4 3 2 1 E E 1 4 5 8 E 16 10 7 1 10 16 B C E 7 1 V B10S0150A TJ6 CPU IVC F-AV V-ADJ.UP V-ADJ.DOWN 1 4 1 4 TJ2 TJ5 TJ3 TJ1 TP113 1 5 B10S01500 NA8A CHASSIS 1 4 *** H-OUT V-OUT TUNER POWER VOL-UP VOL-DN CH-UP CH-DN PRESET TP51 TP50 KD ACK STA TUS CLK DATA GND KTP TP34 TE7 TP7 KY MTS AUDIO OUT POWER AV TP301 TP317 TP318 4A-125V 4A 125V TP132 L R A1901A C258 JW16 JW15 JW14 JW13 JW12 JW11 JW10 JW09 JW08 JW07 JW06 JW05 JW04 JW03 JW02 JW01 C504A KXH6 KXH3 KXH1 R413 J3411 PB100B PB100A J015 J118 R411AH1 R411AH2 J012 C411H2 C411AH2 C411H1 R411A L413H1 L413H2 L413AH1 JP413 R413A L413A L413 R408 C411A J014 IC501H5 IC501H4 T402B J1904 J817 J815 J816 J508 J503 J518 J3405 IC501A Q402H7 Q402 Q402H6 J117 J115 R472 J3410 J3409 J3408 J3407 J3406 J854 J855 J252 KB1 J1903 R1903 SW1901 J3442 J3443 K1011 K1011A KX D001 C609 R634 R430 R107 C604 C603 D408 Q612 R692 R615 L611 R606 L612 C612 Q611 C614 C613 D614 R607 R614 D613 Q613 C611 R611 D611 C608 C608A R612 J602 R618 R617 R613 R603 R604 L602 Q601H1 Q601H2 Q601 IC601 C634 D627 Q635 R630 R631 Q695 D693 R694 Q693 C693 J114 J113 Q001 R006 C012 Q005 R013 J624 J848 J211 J1013 J445 J443 J441 J814 J802 J502 J852 J851 R884 R883 L801 J803 L811 D843 D834 C829 C853 X801 C851 C856 L851 L821 C822 C811 C802 C806 IC802 L863 R848 R849 J843 J842 R847 R846 L812 Q486 C489 R495 R832 D836 L3401 J3471 R489 R511A JP608 JP201 J134 J809 J812 J481 J448 J811 J142 J446 J449 J1006 D472 Q402H5 Q402H2 Q402H4 Q402H3 Q402H1 IC501 IC501H3 IC501H2 IC501H1 J492 R444 R443 R441 R252 J841 J453 C497 R284 R402 R488 D490 R499 Q490 J447 L284 J846 J847 J849 J131 R803 R804 R276 C421 D421 D422 R201 R144 Q208 C221 C211 J216 C426 R401 J141 Q135 C131 C147 C272 C284 C509 C403 R400 C253 C256 C153 C212 X251 X161 T151 L164 Q202 L256 C401 D351 C252 C405 C505 KS J276 L146 X141A X141 L136 C151 R495A C274 J209 J808 R829 R823 R1909 R1910 J144 R833 C1081 J1004 L1001 J1011 D486 R487 R489A R486 J017 C015 J3404 J3402 J3401 C001 C002 J013 J402 Q1071 D806 D801 R421 J3403 C3427 C3435 C3437 C3448 C3447 C3442 KSP C3418 C3416 C3404 C3424 C3432 C3412 C3401 C3414 C3413 C3408 C3441 C3411 C3417 C010 C011 D1002 C1002 R1059 J1052 J1051 D1051 D1052 D1001 C1059 C1001 C1051 IC1081 C106 C101 D101 C102 R106 J601 J401 R683 R686 IC681A C683 IC681 D683 D629 R412 J102 R857 R856 L141 RL601 LF601A LF601B LF601 C601 C601A C601B F601B F601A C631A C631 A2 A1 R602 C606 D602 D601 D603 D612 C632 L625 D625 L623 C627 C624 C626 C632A T601H2 T601H7 C609H1 C609H2 C606A D624 R601H1 R601 R601H3 Q627 Q681 R628 D604 C417A C416A R404 R416 KY1P J1907 D409 C411 J412 J411 R485 R353 J407 C473 R411 IC001 C408 C406 C407 L404 R407 C511 T401 C417 C416 L402 R406 L1901 R511 D1901 C511A Q401 C412 L401 L401A D429 R483 KB R482 D428 C482 KD2P KD1P R492 R481 D483 R497A R422 D482 C484 C493 D481 C481 R497 D487 R493 R494 R491 R428 KT1P KT2P KT3P KT4P KT5P C1902 C412A J409 D503 J1014 C629 C3436 R011 R012 PS601A C1901 J1001 R1054 JP1003 R1073 R1071 C601C R1053 JP1053 R601A R601H2 R510 C414 C628 C633 C633A D1902 C487 C625 R471 D471 C471 J501 R517 C516 R503 R514 R504 R509 R508 C504 R506 C503 C501 R513 R512 R507 R505 D502 C506 D501 C502 L501 R1072 T601A T601 T601AH11 T601AH14 PS601 PS601B D680 C3439 J1083 J1082 J1007 J1081 J493 SW1902 SW1903 SW1904 SW1905 SW1906 SW1907 A101 K1001 K001 K1051 TP-E T402H1 T402H2 T402H3 T402H4 T402H5 T402H6 T402H7 T402H8 T402H10 T402H11 T402H9 T402 T402A T402H12 T402B T402H11B

MAIN BOARD - Foil Side X X X X X X X X X X X X X X X X X X X X X X 1 E E E 1 3 2 3 2 1 E E E E E 42 40 30 22 21 20 10 1 1 4 5 8 E E E E 1 10 20 24 25 30 40 41 50 60 64 65 70 80 E 1 5 E 1 10 12 13 20 24 25 30 36 37 40 48 1 9 8 16 1 4 3 2 1 E E 1 4 5 8 E + + 1 7 10 16 1 7 10 16 TP21 B C E IF TP10 FIXED OUT-L FIXED OUT-R AUX2-V AUX2-L AUX2-R TP16 B10S0150A TP301 4 TJ6 B10S01500 TP51 TP132 5 4 1 TJ2 TJ5 TJ3 TP35 TP36 TJ1 TP113 1 TP50 TE7 TP7 4 POWER VOL-UP VOL-DN CH-UP CH-DN MENU KD TP317 TP318 TB MB PB SCL SDA EN AGC A1901A C258 JW16 JW15 JW14 JW13 JW12 JW11 JW10 JW09 JW08 JW07 JW06 JW05 JW04 JW03 JW02 JW01 C504A KXH6 KXH3 KXH1 R413 J3411 PB100B PB100A J015 J118 R411AH1 R411AH2 J012 C411H2 C411AH2 C411H1 R411A L413H1 L413H2 L413AH1 JP413 R413A L413A L413 R408 C411A J014 IC501H5 IC501H4 T402B J1904 J817 J815 J816 J508 J503 J518 J3405 IC501A Q402H7 Q402 Q402H6 J117 J115 R472 J3410 J3409 J3408 J3407 J3406 J854 J855 J252 KB1 J1903 R1903 SW1901 J3442 J3443 K1011 K1011A KX D001 C609 R634 R430 R107 C604 C603 D408 Q612 R692 R615 L611 R606 L612 C612 Q611 C614 C613 D614 R607 R614 D613 Q613 C611 R611 D611 C608 C608A R612 J602 R618 R617 R613 R603 R604 L602 Q601H1 Q601H2 Q601 IC601 C634 D627 Q635 R630 R631 Q695 D693 R694 Q693 C693 J114 J113 Q001 R006 C012 Q005 R013 J624 J848 J211 J1013 J445 J443 J441 J814 J802 J502 J852 J851 R884 R883 L801 J803 L811 D843 D834 C829 C853 X801 C851 C856 L851 L821 C822 C811 C802 C806 IC802 L863 R848 R849 J843 J842 R847 R846 L812 Q486 C489 R495 R832 D836 L3401 J3471 R489 R511A JP608 JP201 J134 J809 J812 J481 J448 J811 J142 J446 J449 J1006 D472 Q402H5 Q402H2 Q402H4 Q402H3 Q402H1 IC501 IC501H3 IC501H2 IC501H1 J492 R444 R443 R441 R252 J841 J453 C497 R284 R402 R488 D490 R499 Q490 J447 L284 J846 J847 J849 J131 R803 R804 R276 C421 D421 D422 R201 R144 Q208 C221 C211 J216 C426 R401 J141 Q135 C131 C147 C272 C284 C509 C403 R400 C253 C256 C153 C212 X251 X161 T151 L164 Q202 L256 C401 D351 C252 C405 C505 KS J276 L146 X141A X141 L136 C151 R495A C274 J209 J808 R829 R823 R1909 R1910 J144 R833 C1081 J1004 L1001 J1011 D486 R487 R489A R486 J017 C015 J3404 J3402 J3401 C001 C002 J013 J402 Q1071 D806 D801 R421 J3403 C3427 C3435 C3437 C3448 C3447 C3442 KSP C3418 C3416 C3404 C3424 C3432 C3412 C3401 C3414 C3413 C3408 C3441 C3411 C3417 C010 C011 D1002 C1002 R1059 J1052 J1051 D1051 D1052 D1001 C1059 C1001 C1051 IC1081 C106 C101 D101 C102 R106 J601 J401 R683 R686 IC681A C683 IC681 D683 D629 R412 J102 R857 R856 L141 RL601 LF601A LF601B LF601 C601 C601A C601B F601B F601A C631A C631 A2 A1 R602 C606 D602 D601 D603 D612 C632 L625 D625 L623 C627 C624 C626 C632A T601H2 T601H7 C609H1 C609H2 C606A D624 R601H1 R601 R601H3 Q627 Q681 R628 D604 C417A C416A R404 R416 KY1P J1907 D409 C411 J412 J411 R485 R353 J407 C473 R411 IC001 C408 C406 C407 L404 R407 C511 T401 C417 C416 L402 R406 L1901 R511 D1901 C511A Q401 C412 L401 L401A D429 R483 KB R482 D428 C482 KD2P KD1P R492 R481 D483 R497A R422 D482 C484 C493 D481 C481 R497 D487 R493 R494 R491 R428 KT1P KT2P KT3P KT4P KT5P C1902 C412A J409 D503 J1014 C629 C3436 R011 R012 PS601A C1901 J1001 R1054 JP1003 R1073 R1071 C601C R1053 JP1053 R601A R601H2 R510 C414 C628 C633 C633A D1902 C487 C625 R471 D471 C471 J501 R517 C516 R503 R514 R504 R509 R508 C504 R506 C503 C501 R513 R512 R507 R505 D502 C506 D501 C502 L501 R1072 T601A T601 T601AH11 T601AH14 PS601 PS601B D680 C3439 J1083 J1082 J1007 J1081 J493 SW1902 SW1903 SW1904 SW1905 SW1906 SW1907 A101 K1002 K1001 K001 K1051 TP-E T402H1 T402H2 T402H3 T402H4 T402H5 T402H6 T402H7 T402H8 T402H10 T402H11 T402H9 T402 T402A T402H12 T402B T402H11B PB PB D831 C510 J1905 J1050 J850 J1902 R1908 R1902 R1904 R1905 R1906 R1907 R627 R691 R616 R608 R619 R609 R693 R695 R632 JP005 R005 J804 R835 R881 R882 J881 R854 R842 R864 R862 C862 R858 C854 IC801 R831 R807 R808 R852 C858 C852 R851 R816 R813 R801 R814 C857 C801 C821 C807 C808 R853 R806 C810 C809 J813 Q831 C835 R844 R843 R809 R810 R886 R135 R137 C508 R209 R1083 C1071 R449 R272 R274 R273 R134 R423 R167 C152 R208 J217 C441 C404 C135 C138 C804 C161 IC101 R165 R164 R163 R321 R212 R251 R442 C257 C251 R281 C282 R282 R405 R287 R289 R288 C285 C843 C841 C842 C803 R161 R162 C146 R131 R143 C143 C427 R142 C141 R141 C142 C132 C137 C136 R136 C134 C133 R133 R151 R426 C402 PB3 PB2 R211 R221 R166 C1052 R3402 R3401 R1082 R1081 R1004 R1007 R1006 R1003 C3402 C3403 J018 D1059 R3422 IC3401 JP011 JP012 R3407 R3406 R3411 R3426 R002 R3421 C3431 C3433 C3434 C3407 C3406 C3422 C3421 C004 C003 R003 R001 R004 R3443 R3442 R3441 R3444 R1002 R3447 R3448 R1051 R3436 R3434 R3435 R1052 R3437 R1001 R3445 R3446 C103 R103 C812 C813 R629 C689 C800 C883 C884 PB1 D882 D881 D883 D884 R1901 R1084 C1080 C006 PB J021 J414 J1901 JP1002 JP1071 R3433 R3432 J603 C3426 C3423 R518

E E E B10S0150B 1 5 1 4 (-) 9V HEATER +B R G B (-) (-) Q701A Q701 K7Y1 R706 R726 K7U1 C742 Q721A Q711A Q711 Q721 R707 R704 R721 R711 C702 R717 R727 *** SCREEN R701 R724 K7S R716 K7B GND R707A R717A R727A K701 X X X X E E E B10S0150B 1 4 1 5 (-) 9V HEATER +B R G B (-) (-) G1 G SCREEN R H2 H1 B CAUTION HIGH-VOLTAGE AT FOCUS PIN Q701A Q701 K7Y1 R706 R726 K7U1 C742 Q721A Q711A Q711 Q721 R707 R704 R721 R711 C702 K7B R717 R727 R701 R724 K7S R716 K7B R707A R717A R727A K701 R722 R723 R712 R713 R714 C711 R702 R703 C721 C701 C712 C741 PICTURE TUBE SOCKET BOARD - Foil Side

A RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE 4A, 125V FUSE. ATTENTION: POUR MAINTENIR LA PROTECTION CONTRE LES RISQUES D' INCENDIE UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE 4A, 125V. CAUTION 4A 125V BLOCK DIAGRAM 17 42 41 40 39 25 29 3 27 OSD (R) OSD (G) OSD (B) OSD (BLK) RESET AFT S-CURVE POWER FAIL POWER ON/OFF STANDBY MODE ALWAYS +5V CONTROL Q693, Q695 Q635 OVERLOAD PROTECT. D612 PHOTO COUPLER IC601 POWER REG. Q681 12V SW DRIVE IC681 5V REG. RESET D601-D604 FULL WAVE RECTIFIER Q613 ERR. AMP. Q611 Q612 OSC Q601 SW. T601 CONVERTER TRANS. LF601 LINE FILTER PS601 POSISTOR L901 DEGAUSING COIL AC120V 60Hz F601 AC FUSE C601 D627 +130V D624 TJ1 D625 4A 125V +12V Q627 12V SW. Y CV IN MUTE S SW S/COMP SW AV1/AV2 SW 12 13 14 15 8 OSD SW. RGB OUT CONT BRITE COLOR DEMOD SHARP BPA BLACK STRETCH DELAY LINE SYNC SEP. HORIZ. DRIVER VIDEO DET. FM DET. BUS INTERFACE IC101 SIGNAL PROCESS SDA 9 SCL 10 78/79 11 Y 52 Y 54 49 H V BEAM VOLTAGE DETECT. ABL-IN RF AGC 77 ACL X141 SAW FILTER A101 UHF/VHF TUNER WITH PLL & BAND SW IF AGC IC802 EEPROM 6 5 A1901 RC PRE-AMP SW1901-1906 CONTROL KEYS RF AGC BUS SCL BUS SDA IIC SCL IIC SDA RC IN KEY IN X IN X OUT 28 38 34 35 32 4 33 5 31 10 9 19 20 30 2 1 IC801 CPU WITH CAPTION DECODER X 801 ANT C809 C808 IC501 VERT. OUTPUT Q401 HORIZ. DRIVE T401 H-DRIVE TRANS. Q402 HORIZ. OUTPUT HOLD DOWN DETECT. 30 40 17 18 19 HOLD DOWN T402 HORIZ. OUTPUT TRANS. H.V. DEFLECTION YOKE L902 ABL FOCUS SCREEN HEATER V +B LOW +B AUDIO +B +200V VERT +B 6/7 9 5 3 8 4 1 V H 5 H-PULSE ABL Q721 Q711 Q701 -R OUT -G OUT -B OUT G R B Q901 PIX TUBE D483 +26V (7V) D429 D428 (13V) R428 ANODE LEAK DETECT. L164 X161 75 56 36 V-S 37 H-S 33 26 IC001 AUDIO AMP. 7 L 6 R 2 1 SP901 LEFT SPEAKER D482 VIDEO 1 Q486 9V REG. Q490 5V REG. 5V ALWAYS 12V 9V TJ5 35 H-S V-S 5V B6 D801 CAP VIDEO OUT Q1071 BUFF. VIDEO SW. Q831 RESET 15V Q001 POWER OFF NOISE CANCEL D492 D481 RL601 RELAY +12V 4 15 14 INT. VIDEO EXT. VIDEO 9/10 11 V2 13 V1 12 S-Y 1 V1/V2 2 S-C 3 INT-V 5 V Y C H H L L H L 4.5MHz SOUND TRAP Q202 BUFFER Q135 BUFFER 39 38 4 3 LS OUT-R LS OUT-L TV OUT-R TV OUT-L 37 36 13 IC3401 MTS DECODER 5 6 SDL SCL Y C S-SW VIDEO IN-2 AUDIO IN-2 (L) K1001 REAR AV IN (AV2) AND FIXED AUDIO OUT VIDEO IN-2 (R) FIXED AUDIO OUT (L) FIXED AUDIO OUT (R) VIDEO IN-1 AUDIO IN-1 (L) K1011 FRONT AV IN (AV 1) VIDEO IN-1 (R) 34 33 K1051 S-VIDEO IN (AV 2) AUDIO +B Q005 AUDIO +B SWITCH 3 SP902 RIGHT SPEAKER IC1081 MODE SW — 26 —

Printed in U.S.A. For parts or service contact SANYO Fisher Service Corporation 21605 Plummer Street Chatsworth, CA 91311 (U.S.A.) 300 Applewood Crescent, Concord, Ontario L4K 5C7 (CANADA)

SCHEMATIC DIAGRAMS NOTES ON SCHEMATIC DIAGRAM 1. All resistance values in ohms K=1,000 M=1,000,000. 2. Unless otherwise noted on schematic, all capacitor values less than 1 are expressed in µF (Micro Farad), and the values more than 1 are in pF. 3. Unless otherwise noted on schematic, voltage reading taken with VOM from point indicated to chassis ground. Voltage reading taken using color bar-signal on VHF channel 5, all controls at normal. Line voltage at 220 volts. Some voltages may vary with signal strength. 4. Waveforms were taken with color-bar signal and controls set for normal picture. Waveforms marked with an ✽may vary with signal strength. 5. Symbol indicates a fusible resistor, which protects the circuit from possible short circuits. PRODUCT SAFETY NOTICE THE COMPONENTS DESIGNATED BY A STAR (#) ON THIS SCHEMATIC DIAGRAM DESIGNATE COMPONENTS WHOSE VALUES ARE OF SPECIAL SIGNIFICANCE TO PRODUCT SAFETY. SHOULD ANY COMPONENT DESIGNATED BY A STAR NEED TO BE REPLACED, USE ONLY THE PART DESIGNATED IN THE PARTS LIST. DO NOT DEVIATE FROM THE RESISTANCE, WATTAGE AND VOLTAGE RATINGS SHOWN. SERVICE NOTES: 1. When replacing parts on circuit boards, clamp the lead wires to terminals before soldering. 2. When replacing high wattage resistors on circuit board, keep the resistor body 10 mm (3/8”) from circuit board. 3. Keep wires away from high voltage and high temperature components. X-RADIATION WARNING NOTE THIS TV CONTAINS CRITICAL PARTS TO PROTECT AGAINST X-RADIATION. NOMINAL 2ND ANODE VOLTAGE IS 26.5KV AT ZERO BEAM CURRENT AT 120 VOLTS AC LINE, AND MUST NOT EXCEED 28.0KV UNDER ANY OPERATING CONDITION. SEE HIGH VOLTAGE CHECK ON PAGE 8. 1 1 1 1 TOP VIEW SIDE VIEW COUNT TERMINALS IN ARROW DIRECTION MARK E C B A K A K A K A K A K A K INFRARED EMITTING A....ANODE K....CATHODE INTEGRATED CIRCUITS TRANSISTORS 1 DIODES PHOTO COUPLERS B ... BASE C ... COLLECTOR E ... EMITTER E CB E CB E C B E C B E CB E C B E C B E C B 3 2 1 3 2 1 GND (2) IN (1) OUT (3) 1 1 TOP VIEW 1 CHIP TRANSISTORS B C E TOP VIEW B ... BASE C ... COLLECTOR E ... EMITTER CHIP RESISTORS TOP VIEW 123 12 x 10 = 12K ohm 3 CAPACITOR AND RESISTOR CODE CHART CAPACITOR (Example) 500 C K 1500 B D ........................... ±0.5pF T ............................ +50% –10% J ............................ ±5% K ........................... ±10% M ........................... ±20% N ........................... ±30% Characteristics P ........................... +100% –0% Value code Z ........................... +80% –20% Tolerance code C ........................... ±0.25pF Material code C ........................... Ceramic Voltage rating E ........................... Electrolytic F ........................... Polyester N ........................... Polypropylene T ............................ Tantalum K ........................... Ceramic H ........................... MT-Composite P ........................... NP. Electrolytic M ........................... MT-Polypropylene RESISTOR (Example) 6 Y K 4.7 D ........................... ±0.5% F ........................... ±1% G ........................... ±2% J ............................ ±5% Value code K ........................... ±10% Tolerance code M ........................... ±20% Material code F ............................ Fusible Wattage rating N ........................... Metalized Carbon S ........................... Oxide Metalized Y ........................... Wire Wound C ........................... Solid D ........................... Carbon Film W .......................... Wire Wound IC101 pin-17 (R-Output) IC101 pin-18 (G-Output) IC101 pin-19 (B-Output) IC101 pin-52 (Video Input) IC501 pin-5 (Vertical Output) IC501 pin-1 (Inverting Input) Q202-E (TP16) (Inverting Video) T402 pin-9 (Heater) Q401-B (Horizontal Drive) Q402-B (Horizontal Output) Q601-G (Power Switching) WAVEFORMS Note: Voltages were measured with color-bar signal and controls set for normal picture. 3.4Vp-p Horiz. 3.4Vp-p Horiz. 3.4Vp-p Horiz. 1.0Vp-p Horiz. 50.4Vp-p Vert. 0.6Vp-p Vert. 1.0Vp-p Horiz. 1.0Vp-p Horiz. 18.2Vp-p Horiz. 15Vp-p 50KHz 29.6Vp-p Horiz. Device/Pin # Volts/Mode D612-1 POWE ON: POWER OFF 30.0 10.5 D612-2 POWE ON: POWER OFF 29.0 9.4 D612-3 POWE ON: POWER OFF 0.7 0.4 D612-4 POWE ON: POWER OFF 16.0 1.7 IC001-1 6.5 IC001-2 15.2 IC001-3 6.3 IC001-4 GND IC001-5 N.C. IC001-6 1.4 IC001-7 1.4 IC001-8 GND IC101-1 GND IC101-2 GND IC101-3 GND IC101-4 GND IC101-5 GND IC101-6 5.1 IC101-7 2.1 IC101-8 2.7 IC101-9 3.8 IC101-10 3.6 IC101-11 4.3 IC101-12 1.5 IC101-13 1.5 IC101-14 1.4 IC101-15 0.2 IC101-16 8.2 IC101-17 2.5 IC101-18 2.2 IC101-19 2.4 IC101-20 GND IC101-21 GND IC101-22 GND IC101-23 GND IC101-24 GND IC101-25 N.C. IC101-26 2.1 IC101-27 2.6 IC101-28 5.3 IC101-29 2.7 IC101-30 0.4 IC101-31 GND IC101-32 N.C. IC101-33 1.0 IC101-34 1.8 IC101-35 N.C. IC101-36 5.0 IC101-37 4.3 IC101-38 4.7 IC101-39 GND IC101-40 0 IC101-41 GND IC101-42 GND IC101-43 GND IC101-44 2.3 Device/Pin # Volts/Mode IC101-45 3.6 IC101-46 2.1 IC101-47 3.1 IC101-48 GND IC101-49 2.5 IC101-50 GND IC101-51 GND IC101-52 2.6 IC101-53 5.1 IC101-54 2.9 IC101-55 2.6 IC101-56 2.5 IC101-57 GND IC101-58 3.6 IC101-59 4.4 IC101-60 4.4 IC101-61 GND IC101-62 GND IC101-63 GND IC101-64 GND IC101-65 2.4 IC101-66 2.2 IC101-67 2.2 IC101-68 0 IC101-69 3.2 IC101-70 GND IC101-71 GND IC101-72 GND IC101-73 2.3 IC101-74 GND IC101-75 2.2 IC101-76 2.6 IC101-77 2.2 IC101-78 2.9 IC101-79 2.9 IC101-80 GND IC501-1 2.5 IC501-2 26.2 IC501-3 2.4 IC501-4 GND IC501-5 12.8 IC501-6 26.6 IC501-7 2.5 IC601-1 130.0 IC601-2 29.2 IC601-3 GND IC681-1 13.4 IC681-2 GND IC681-3 5.0 IC801-1 4.0 IC801-2 3.9 IC801-3 4.9 IC801-4 0 IC801-5 0 IC801-6 0.3 IC801-7 0 IC801-8 0 IC801-9 0 IC801-10 4.9 Device/Pin # Volts/Mode IC801-11 GND IC801-12 4.8 IC801-13 GND IC801-14 4.9 IC801-15 1.9 IC801-16 0.2 IC801-17 2.1 IC801-18 GND IC801-19 2.2 IC801-20 2.0 IC801-21 GND IC801-22 4.9 IC801-23 GND IC801-24 GND IC801-25 4.8 IC801-26 0.3 IC801-27 POWE ON: POWER OFF 4.9 0 IC801-28 3.9 IC801-29 2.6 IC801-30 0 IC801-31 4.9 IC801-32 3.6 IC801-33 4.9 IC801-34 3.7 IC801-35 4.8 IC801-36 4.9 IC801-37 4.9 IC801-38 4.8 IC801-39 0.2 IC801-40 0 IC801-41 0 IC801-42 0 IC802-1 GND IC802-2 GND IC802-3 GND IC802-4 GND IC802-5 4.9 IC802-6 4.9 IC802-7 GND IC802-8 5.0 IC1081-1 2.5 IC1081-2 2.9 IC1081-3 2.5 IC1081-4 3.0 IC1081-5 2.5 IC1081-6 GND IC1081-7 GND IC1081-8 GND IC1081-9 0 IC1081-10 0 IC1081-11 0 IC1081-12 2.9 IC1081-13 2.5 IC1081-14 2.9 IC1081-15 2.9 IC1081-16 9.3 VOLTAGE CHARTS Note: Voltages were measured with color-bar signal and controls set for normal picture. Device/Pin # Volts/Mode IC3401-1 4.1 IC3401-2 4.1 IC3401-3 4.1 IC3401-4 4.1 IC3401-5 3.6 IC3401-6 3.7 IC3401-7 GND IC3401-8 4.1 IC3401-9 4.1 IC3401-10 4.1 IC3401-11 4.1 IC3401-12 4.9 IC3401-13 4.1 IC3401-14 1.3 IC3401-15 1.3 IC3401-16 0 IC3401-17 GND IC3401-18 3.2 IC3401-19 9.1 IC3401-20 0 IC3401-21 4.1 IC3401-22 4.1 IC3401-23 3.7 IC3401-24 3.9 IC3401-25 4.1 IC3401-26 4.1 IC3401-27 4.1 IC3401-28 1.9 IC3401-29 4.1 IC3401-30 4.1 IC3401-31 2.0 IC3401-32 4.1 IC34101-33 4.1 IC3401-34 4.1 IC3401-35 0 IC3401-36 4.1 IC3401-37 4.1 IC3401-38 4.1 IC3401-39 4.1 IC3401-40 4.1 IC3401-41 4.1 IC3401-42 GND IC3401-43 4.1 IC3401-44 4.1 IC3401-45 4.2 IC3401-46 GND IC3401-47 4.1 IC3401-48 4.1 Q001-B POWER ON: POWER OFF: 0.7 0 Q001-C POWER ON: POWER OFF: 0 6.3 Q001-E GND Q005-B 15.0 Q005-C 15.7 Q005-E 15.8 Q135-B 2.7 Q135-C 5.2 Q135-E 2.0 Device/Pin # Volts/Mode Q202-B 2.3 Q202-C GND Q202-E 3.0 Q208-B 2.5 Q208-C GND Q208-E 3.1 Q401-B 0.3 Q401-C 39.4 Q401-E GND Q402-B 3.2 Q402-C 132.4 Q402-E -0.2 Q486-B 9.9 Q486-C 11.6 Q486-E 9.2 Q490-B 5.9 Q490-C 7.3 Q490-E 5.2 Q601-G POWER ON: POWER OFF: 0.1 0 Q601-D POWER ON: POWER OFF: 163.5 170.0 Q601-S POWER ON: POWER OFF: 5.6 0.5 Q611-B POWER ON: POWER OFF: 4.6 0.8 Q611-C POWER ON: POWER OFF: 15.7 1.7 Q611-E POWER ON: POWER OFF: 5.7 0.4 Q612-B POWER ON: POWER OFF: 5.4 0.8 Q612-C GND Q612-E POWER ON: POWER OFF: 5.7 0.4 Q613-B POWER ON: POWER OFF: 0.2 0.1 Q613-C POWER ON: POWER OFF: 5.4 0.9 Q613-E GND Q627-B POWER ON: POWER OFF: 12.7 8.0 Q627-C POWER ON: POWER OFF: 13.2 0 Q627-E POWER ON: POWER OFF: 13.3 8.1 Q635-B POWER ON: POWER OFF: 4.0 1.3 Q635-C POWER ON: POWER OFF: 29.0 9.0 Q635-E POWER ON: POWER OFF: 4.0 1.3 Q681-B POWER ON: POWER OFF: 0.7 0 Q681-C POWER ON: POWER OFF: 0 8.1 Q681-E GND Device/Pin # Volts/Mode Q693-B POWER ON: POWER OFF: 0.6 6.7 Q693-C POWER ON: POWER OFF: 28.9 7.8 Q693-E POWER ON: POWER OFF: 2.6 6.1 Q695-B POWER ON: POWER OFF: 28.9 8.8 Q695-C GND Q695-E POWER ON: POWER OFF: 28.9 9.2 Q701-B 2.4 Q701-C 145.5 Q701-E 2.3 Q711-B 2.5 Q711-C 146.6 Q711-E 2.3 Q721-B 2.5 Q721-C 140.2 Q721-E 2.4 Q831-B 4.5 Q831-C 5.1 Q831-E 5.1 Q1071-B 2.9 Q1071-C GND Q1071-E 3.6

L1 IN R1 IN 4 1 1 EEPROM VDD SCL SDA VSS <130V> VCC IN OUT GND 1AA0B10S1130A KD ASSY PWB MAIN C3RK 130V RELAY DRI. (800V-1.2A) X4 (400V-1.5A) X4 (400V-1.2A) X4 D601/.../D604 A F.B.T H-OUT 130V 5 1 26V 4 1 130V FIXED AUDIO OUT L OUT R OUT REAR AV IN AV2 FRONT AV IN AV1 R2-IN L2 IN KTP C IN Y IN S-SW S-GND S IN(AV1) VCC AV1/AV2 S SELECT L H AV1/AV2 SW S/COMP SW L L H H V1 IN V2 IN C SW Y SW V2 IN AV SW INT V/C OUT INT V EXT Y EXT C V2 IN V1 IN 9V-REG. TP113 100mA 60mA 19mA 27mA <5V B6> <9.0V B5> R G B <5PIN> <4PIN> <12V> 1AA0B10B2000A 1AA0B10B200AA C417 R497 * * 1SJ4.7 200NM0.22UVB: 250MJ0.22UAP: 250MJ0.22AU POWER REG. SW1901/.../SW1906 KT1P/.../KT5P FO SC AFC HEATER LOW +B HV V+B HS VS POWER FAIL S SELECT AV1/AV2 R G B BLK MUTE ACK STATUS KEY-IN RC IN AVCC HLF RF-AGC AFT S-CURVE ABL-IN IIC DSA BUS SDA IIC SCL BUS SCL VHOLD CVIN CNVSS XIN XOUT VSS VCC RES POWER FS S-SEL FO SC AFC HEATER LOW +B HV V+B BASS-L LSOUT-R LSOUT-L SDA SCL DGND MAININ MAINOUT PCINT1 PCINT2 PLINT AUX1-L NC AUX1-R VCAWGT VCATC VCAIN VEOUT VETC VEWGT VE SAPIN SAPOUT NOISETC STIN SUBOUT NC VCC SAPTC GND NC IREF VGR COMPIN AUX2-R AUX2-L TVOUT-R TVOUT-L NC NC SURRTC TRE-R BASS-R TRE-L TOUT-L VOLIN-L TOUT-R VOLIN-R LIM AMP FM DET A2C PLL VIDEO AMP VIDEO DET SPLL BPF BPF DC VOL SW RF AGC IF AGC VIF AFT BUS ABL CLAMP CLMP CLMP VIDEO SW SW 1ST AMP BPF 2ND AMP BPF DEMO COLOR CLAMP CONTRAST BRIGHT TRAP DELAY LINE PEAKING CORING BLACK STRETCH DC REST RGB MATRIX OSD SW OSD FIX GAIN BRIGHT DRIVE/CUT-OFF E/W VER C/D VER RAMP HDR VCC VER SEP ACC KILLER SYNC SEP APC1 VCO TINT CW KIL X-RAY HDR C/D AFC2 FBP 1/256 HDR VCO PHASE SHIFTER AFC1 HDR OUT 2VP-P 1VP-P 1VP-P CPU RESET FRAME-GND FRAME-GND FRAME-GND FRAME-GND IF-GND IF-VCC NC H-GND H-GND V/C/Vert GND NC V/C/Vert VCC NC NC IF-GND IF-GND +8V +5V 2Vp-p G-OUT R-OUT B-OUT ASSY,PWB,CRT C3RK 1AA0B10S1130B 1 1 4 5 R G B Q701/Q711/Q721 SOCKET L902 SP901 L901 SP901 TP318 TP317 TP51 TP50 TP35 TP36 W601 C800 R856 R857 R1910 R1909 D1901 R1901 R1903 R1904 R1905 R1906 R1907 R1908 SW1902 SW1903 SW1904 SW1905 SW1906 SW1907 C1902 A1901A D1001 C1001 R3448 R3447 C3448 R3445 C3447 R3446 R1001 R3436 R3437 C3437 R3435 R3434 C3435 KSP C683 R289 R288 R287 D629 R629 C835 IC681 F601 D487 R601H3 C106 R505 R404 D806 C421 R423 R485 IC501 D502 C511 R511 C504 D501 C502 C508 C506 R503 C503 R506 R504 R509 R508 R513 R512 C501 R514 C516 R518 R517 IC501H3 R507 KS KB R829 R823 C822 R807 IC802 R854 L1901 C853 R831 D834 R833 D836 R832 R816 R813 D831 C829 C811 R814 D843 C821 R846 R847 R848 R849 R853 C854 R862 L821 Q831 L801 C801 C802 R864 R842 R843 R844 C862 R886 R852 C806 R411 R691 D680 R628 R627 Q627 KD2P KD1P R601H1 A101 C482 T401 C632A C103 KX5P KX4P KX3P KX1P T601AH14 A2 A1 C609H2 C609H1 T402H11 T402H10 T402H8 T402H3 T402H7 T402H6 T402H9 T402H5 T402H2 T402H4 T402H1 C102 D101 T402 R494 R493 R428 D428 D429 C624 D422 R103 R106 C101 L623 L625 C632 D612 C625 D625 C628 D624 C627 C626 D603 D604 D602 D601 C609 LF601 R601 C601 C606 R602 Q681 D683 C011 C493 R497 D503 C487 D483 R483 R481 R482 D482 R491 D481 R492 C484 R421 R683 C416 C417 C473 C411 C412 L402 Q402 L401 C408 R407 R406 C407 C406 Q401 TE7 TP7 R422 D421 C689 R686 IC681A L863 PS601 C010 C631 C631A C629 R416 R408 D409 C812 C813 R808 R806 R809 JP011 JP012 R835 K1011 R3442 C3441 R3441 C3442 R3443 R3444 R851 X801 C858 C856 C851 C852 C857 L851 R883 R884 D881 D882 D883 D884 KT2P KT3P KT4P KT5P KT1P R801 R882 R881 C883 C884 C807 C808 R810 K1051 C1059 D1059 JP1003 R1006 R1003 R1004 R1007 R1082 R1081 D1052 D1051 R1051 R1052 C1051 C1052 IC1081 R1054 R1053 C1081 R1071 C1071 R1059 R1002 C1002 D1002 JP1002 R1083 R1084 K1001 K1002 R858 C481 L501 L1001 L812 L811 IC801 R412 KY1P L401A RL601 C1080 C006 JP1053 Q1071 C1901 C809 C810 T402H12 R3433 R3432 JP1071 R601A R510 C414 C633 C633A D1902 C489 C004 C003 R004 R003 C001 C002 R486 R487 D486 Q486 R489 TP301 C3439 C3436 IC3401 C3416 C3418 C3424 R3426 C3427 C3426 C3423 R3422 R3421 C3422 C3421 C3406 R3406 C3407 R3407 C3404 R3402 R3401 C3434 C3433 C3432 C3431 C3401 R3411 C3408 C3411 C3412 C3413 C3414 C3417 L404 R208 TJ5 C404 R321 C253 Q202 C151 C146 C147 R131 X161 R164 L164 R495 D351 R252 D490 Q490 R499 R488 C505 C401 C402 C252 L256 R163 R201 L136 C136 R136 C138 R282 L146 R272 L284 L141 X141 X141A T151 C143 R143 R142 R144 R141 C141 C142 C132 C134 C133 R133 C137 R151 C152 C153 R165 C257 C258 C212 R212 C256 X251 C251 R251 R426 R441 C441 R442 R443 R444 R449 R353 C282 R281 R400 C405 R405 C403 R401 C509 R284 C285 C284 C841 C842 C843 R273 C272 C804 R804 C803 R803 C161 R161 R162 C131 IC101 D801 C497 R137 R135 Q135 C135 R402 C426 C211 C221 Q208 C427 R166 R221 R274 C274 R211 R167 R134 R002 R001 IC001 C015 R471 D471 C471 R276 TJ1 TJ2 TJ3 JP608 T601 R472 D472 JP201 R1072 R1073 R209 C3402 C3403 TP132 TP21 TP12 TP20 TP11 TP16 T601AH11 R495A L3401 TP34 TJ6 R013 C012 R006 R005 Q005 JP005 Q001 R630 D627 R631 Q635 R632 R634 C634 D693 R694 R692 C693 R693 R695 Q695 Q693 IC601 AT3 AT3 R603 C608A C608 R604 L602 R615 Q601H2 Q601H1 R612 D611 R611 R613 L611 Q601 C611 C612 R608 R607 D614 C613 R616 D613 R614 R618 R617 R619 C614 R606 Q613 R609 Q612 L612 Q611 D408 C603 C604 R430 R107 D001 L413A L413 R413 JP413 C411H1 C411H2 KB1 K1011A KX L413H1 L413AH1 L413H2 R1902 SW1901 R411AH2 R411AH1 Q701 R703 C701 R713 R724 C711 Q711 R723 C721 Q721 R707 R717 R727 R716 R726 R706 C742 K7Y1 C741 R714 R704 R721 R711 R701 C702 K701 Q711A Q721A Q701A K7U1 R722 R712 R702 K7S K7B C712 L70B16800 (TOSHIBA CRT) A10B03600 1AV0 L81B(2470: 2920) A10B03600 SEMI ITC (SAMSUNG CRT) X X X X X X W10B14300 X 100 100 1K 1K DZXLB ZA6.8A 1/16GJ 10KC 1.8K 1/16GZ0C 1/16GJ 2.2KC 1/16GJ 3.9KC 1/16GJ 5.6KC 1/16GJ 12KC X S10B3670J: S10B0900J: S10B5650J S10B3670J: S10B0900J: S10B5650J S10B3670J: S10B0900J: S10B5650J S10B3670J: S10B0900J: S10B5650J S10B3670J: S10B0900J: S10B5650J 16EM 10 LBWA U20B40500 DZXLB ZA10B 16EM 10 LBWA 1/16GJ 100C 1/16GJ 330KC EM4.7 LBWA 1/16GJ 330KC EM4.7 LBWA 1/16GJ 100C 1/16GJ 75C X X X X X X J10EA040N 16EM 220 LBWA 1/16GJ100C 1/16GJ100C 1/16GJ100C RD16EB1 :MTZJ16A 1/16 GJ1KC KK 0.01 LZB UPC78L05J :TA78L05S 4A125V (M:MD:MDK:T) S5277B :ED0445 :MPG06D :ERA15-02 2400010 EM2.2 LBWA 1/2DJ 1.2 47 X 6.3EM 220 1/16GF 3.3KC 18K LA78040 1Z75 FK0.15D: FJ0.15D 2SJ 120 25EM 2200 LBWA S5277B: ED0445: MPG06D: ERA15-02 35EM 220 CJ56CL FK5600 (BF:D) 3.9K EK 2.2AE 560 10K 6.8K 18K X X X J 16EM 10 LBWA 1/16 GJ18KC 18K 2400010 1/2DJ1 J11NA050N J11NA040N 100 100 16EM 22 LBWA 1/16 GJ 10KC ST24C02B6: 24LC02B/P: S524C20D21: CAT24WC02P: M24C02-BN6 1/16GJ 2.2KC L2B95R6KN: L2E15R6KN EM0.1 LBWA 1/16GJ 100KC DZXLB ZA15B 10K R X 1/16 GJ 330C 1/16GJ 10KC UDZS3.6BG EM1 LBWA EM1 LBWA 1/16 GJ 10KC R X 1K 5.6K 5.6K 5.6K 1/16GJ 1MC CJ82 CL 1/16GJ 100C L2B9 5R6KN :L2E1 5R6KN AJ L2B95R6KN :L2E15R6KN KK 0.01 LZB X 1/16GJ120KC 1/16GJ 560C 1/16GJ 560C 1/16GJ 560C KK 0.01 LZB 1/16GJ 10KC 1/16GJ39KC 6.3EM 470 LBWA 7SJ 6.8VC 1/16GJ10KC R DJ1.2K 1/16 GJ10KC 2SB985(S:T) :2SA1707(S:T) J30B0250N: J30B1380N 2400010 F1BAM0246 :F1BAM0280 100EM 22 B4L18 B0050N X KK 0.01 LZB 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 2400010 X DZXLB ZA36A L40B1540 DJ390K DJ390K 15K RD15EB3 :MTZJ15C R X HZ11 B2L X 1/2DJ18K 6.3EM 470 LBWA ZZ0122: B4Z21B 0080N ZZ0122: B4Z21B 0080N 250KM1000 (VBW:VBBW) TLP621-1BL :PC817D :PC817C :ON3131S 1000KK 1200(CTB: CRD) RU4AMLF-L1: FE201-6L43 160EM 220XJ RU3YX X 16EM 1000 EM2B :1S1887A :ED0439 200EM 470VAA F35B0290N: F35B1080N: F35B0890N 7WK1VEA 250GK0.22XD :275GM0.22XB 250KM1000 (VBW:VBBW) 1/2CM 3.3MXU: 1/2XJ 3.3MVA AE R 25EM 220 LBWA 100PM 2.2X 2SJ2.2 DZXLB ZA36A 35EM 1000 ES1 :RMPG06G :ERA18-04 1/2DJ 1B 1/2DJ 47B DJ1B TVR1G DJ1K ES1 :ERA18-04 :RMPG06G 1/6NF 33K EM4.7 LBWA 1/6NF 2.2K 4.7K 200MM0.33UVB: 250MJ0.33 (UAP:AU) 200MM0.22UVB: 250MJ0.22UAP: 250MJ0.22AU 63GJ 0.47 LBZA 1500MH 0.012 (XK:AN) X J 2SD2578YB L26B 2790N 160EM 1BE 2SJ 5.6K 1/2DJ8.2K 500KK 1500A 500KK 470A 2SC2271 (D:E: D-C:E-C) 1/6NF 10K HZ11 B2L KZ0.1 LZF J X J DHXAA EV0068 25EM 220 LBWA 250KM1000 (VBW:VBBW) X 16EM 220 33 X X X X 1/16 GJ 10KC 1/16 GJ 4.7KC 1/16 GJ 4.7KC 1/16 GZ0C 1/16 GZ0C 1/16GJ 2.7KC J12B3321N 1/16GJ 100C EM4.7 LBWA 1/16GJ 330KC EM4.7 LBWA 1/16GJ 330KC 1/16GJ 100C 1/16 GJ 1KC V11B00200: V11B0780N KK 1000 LZB EM1 LBWA X X CJ220CL L2B95R6KN: L2E15R6KN 100 100 X X X X J30B0250N: J30B1380N X 1/16GJ100C 1/16GJ100C X X X X 1/16GJ22KC J11B0610N 16EM 10 LBWA UDZS10BG X 1/16GJ 10KC 1/16GJ 10KC 1/16GJ 27KC 1/16GJ 27KC 1/16GJ22KC 1/16GJ22KC DZXLB ZA10B DZXLB ZA10B 1/16GJ 75C 1/16GJ 75C 16EM 22 LBWA KK0.01LZB TC4053BP 27K 10K 16EM 10 LBWA 390 KK 0.01 LZB 1K 1/16GJ 75C 16EM 10 LBWA DZXLB ZA10B X 1/16GJ 27KC 1/16GJ 10KC J12B0530N X 1/16 GJ 22KC X J J L2E11R0KN: L2B91R0KN L2E11R0KN: L2B91R0KN QXXAVB927P X X X S20B00100: S20B0170N: S20B0171N: S20B0230N: S20B0390N: S20B0680N KZ 0.1LZF KK0.01LZB J AC X CJ100 CL CJ100 CL X X X X X X X X X DZXLB ZA10B 16EM 220 LBWA KK 5600 LZB KK 5600 LZB 1/16GJ 1.8KC 1/16GJ 1.8KC EM0.22 LBWA EM0.22 LBWA 2SJ8.2 390 RD10EB2 :MTZJ10B 2SD400 (E-MP:F-MP) 2SJ22 X 25PM4.7D 25PM4.7D CXA2134QP 25PM4.7D 25PM4.7D 25PM4.7D 1/16 GJ3.9KC EM1 LBWA 10TK 10DR 10TK3.3DR 1/16 GJ3KC 1/16 GJ3.3KC KK0.047 LZB KK2700 LZB KK 0.012 LZB 1/16 GJ 100KC KK 5600 LZB 1/16 GJ1MC 25PM4.7D 1/16GJ 220C 1/16GJ 220C KK 0.022 LZB KK 4700 LZB EM0.1 LBWA KK 4700 LZB EM0.1 LBWA 1/16 GF62KC EM0.47 LBWA EM0.47 LBWA 16EM 47 LBWA EM4.7 LBWA 16EM 100 LBWA EM4.7 LBWA L2B9101KN: L2E1101KN 1/16GJ1KC X CJ100CL 1/16GJ10KC EM0.47 LBWA AC EM0.47 LBWA KK0.01 LZB 6.3EM 100LBWA 1/16GJ33KC F32B0190N: F32B0290N 1/16GJ 1KC L2B9150KN: L2E1150KN 1SJ33 DZXLB ZA5.1A 22K DZXLB ZA5.6C 2SD400 (E-MP: F-MP) 390 1SJ15 63GJ 0.47 LBZA 16EM 470LBWA KK 0.01 LZB 63FK 0.047 LBZB J 1/16GJ 120C 470 X 1/16 GZ0C X X X J 1/16GJ6.8KC J J SF 5235P X L14B1840N KK0.01 LZB 1/16GJ 1KC 1/16GJ 33KC J X KK0.01 LZB KK 0.022 LZB X KK1000 LZB KK0.01 LZB 1/16GJ 3KC CJ10CL 1/16GJ 330C X EM 0.47 LBWA X KK0.01 LZB 16EM 47 LBWA EM2.2 LBWA 1/16GJ680KC EM1 LBWA EX0017 (XC:GC:DC) :V10B5270J 1/16GZ 0C 1/16GJ 22KC 1/16GJ680C 1K KK0.01 LZB 1/16GJ 10KC 4.7K 18K 1/16GF 4.7KC 10K X 1/16GJ10KC 100 PM1 LBZA 1/16GJ 5.6KC 63FJ6800 LBZA DJ100 63GJ 0.47 LBZA 47 KK 0.01 LZB 16EM 47 LBWA KZ 0.1 LZF KZ 0.1 LZF KZ 0.1 LZF 1/16GJ 10KC EM3.3 LBWA X 100 X 100 KZ 0.1 LZF 1/16GJ 100KC 1/16GJ 100KC EM1 LBWA LA76834NMP R 6.3EM 100 LBWA 1/16GJ 1KC 1/16 GZ0C AE X DJ120 X PM1 LBZA PM1 LBZA AC KK0.01 LZB 1/16GJ 390C X 1/16GJ 5.6KC 16EM10 LBWA X 1/16GJ180C X 1/16GJ 8.2KC 1/16GJ 8.2KC LA4525 16EM 330 LBWA 1/2DJ1B EU2: ERB44-04 16EM 470 LBWA 12K X X X X L51B4690N: L51B4710N 2SJ8.2 J X X 100 1/16 GJ100C X X X X X X X X 2400010 X J X X 5.6K 16EM 22 LBWA DJ1.5K 1/16GJ 10KC 2SB764 (E:F) X AE 1SJ22K R DJ6.8K AE 1/16 GJ1KC 47K 16EM 47 LBWA RD6.2EB3 :MTZJ6.2C 10K 68K EM0.1 LBWA 1/16GJ 560KC 1/16 GJ22KC 2SA1015Y :2SA564ARCU :2SA608FCNP AE SE130NH 1/2DJ 560K X 1000KK 2200 (NH:CRD:CTB) 2SJ2.2 Z21B0140B 2SJ 0.47 2400010 2400010 1/2FJ 10 R 47K 2SJ 0.47 ZZ0122 2SK2872 -F82 X 63FJ0.1 LBZB 1/16GJ 470KC DJ22 ERA91- 02 63FJ 0.047 LBZA 1/16 GJ 10KC RD9.1 EB3: MTZJ 9.1C DJ470B DJ1K FJ680P 1/16GJ 22KC 63FJ0.01 LBZA DJ47 2SC2274 (E:F) 1/16 GJ22KC 2SA984 (E:F) ZZ0 122 2SC2274 (E:F) 1Z150 500KK 1000A 500KK 1000A 1K DJ8.2K DZXLB ZA15B X X X J 2400010 2400010 X J31B010_NT J10B0730N 2400010 2400010 2400010 1/16GJ 1KC S10B3670J: S10B0900J: S10B5650J 2400010 2400010 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 J30A 00101 1/16GJ 820C KK 1200 LZB 1/16GJ 820C 82 KK 1000 LZB 1/16GJ 820C KK 1000 LZB 2SC2621 (CRA:DRA:ERA): 2SC2688'1'(K:L:M): QT0229Z 2SJ 12K 2SJ 12K 2SJ 12K 1/2DJ 2.7K 1/2DJ 2.7K 1/2DJ 2.7K 2000KZ 1000HE J30B (0250N: 1380N) X X 1/16GJ 82C 82 180 180 180 X J11B3880N X X X J30B (0250N: 1380N) X X X J11NA 050N J11NA040N X 1 3 2 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 5 2 4 1 3 9 6 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 1 2 3 4 5 6 7 8 9 10 12 12 11 10 9 8 7 6 5 4 3 2 1 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 2 3 1 4 5 6 7 16 14 10 11 12 13 2 3 1 4 5 6 7 16 14 10 11 12 13 1 2 3 9V 12V 9V 5 V 5 V B1 12V B1 B1 B1 9V 5V B6 5V B6 15V 5V B6 15V # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # NOTES; 1. RESISTORS SPECIFIED WITH RESISTANCE VALUE ARE "1/6DJ". 2. RESISTORS SPECIFIED WITH TYPE OF RESISTOR, TOLERANCE AND RESISTANCE VALUE ARE "1/4". 3. ALL CAPACITORS ARE 50WV RATING UNLESS OTHERWISE NOTED. 4. PARTS MARKED WITH ARE RELATED WITH X-RADIATION. 5. THICK LINES ARE 15WATTS SUPPLY LINE. 6. VIEW OF TR & FET & IC. 7. ISOLATION BORDER LINE. COLD SIDE HOT SIDE N 1 TOP VIEW LETTER SIDE E C B E BC C E B 12 3 IN CASE OF TR IN CASE OF IC IN CASE OF FET S D G 8. LIST OF REPLACEABLE DIODES. R (7DD00019) 1S2076, 1S2473, DS442, 1N4148 P (7DD00021) 1S2076A,1S2471, 1N4148 9. LIST OF REPLACEABLE TRANSISTORS. AE (7QT00202) AD (7T200183) AB (7T200181) 2SC945A 2SC1815 2SA564A 2SA1015 R,Q,P Q,P Q,R O,Y,GR O,Y,GR Y,GR 10. "J" : JUMPER WIRE. "X" : PART NOT USED. AC (7T200182) R Y,GR 2SC1740S Q,R,S Q,R,S 2SA933S R Q,R AA (7DD00192) 1S2076, 1S2473, DS442, 1N4148, 1SS133 M (7ED00025) 1SS176, 1SS133, GMA01 IMPORTANT: SCHEMATIC PART LOCATION NUMBERS MAY NOT ALWAYS MATCH THE SCHEMATIC SYMBOLS. THE SCHEMATIC SYMBOLS AND PART DESCRIPTIONS ARE CORRECT AND SHOULD BE USED. THE PART DESCRIPTIONS WILL BE LISTED UNDER THE LOCATION NUMBER IN THE PARTS LIST. CHIP AH (7T200220) AJ (7T200221) 2SA1037K R,S 2SA1179 2SC2812 2SC2412K R,S M6,M7 L6,L7 AT2 ARW ARW # # # # # # # # # # # W902 # # # # # # FOR CONTINUED PROTECTION AGAINST A RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE 4A, 125V FUSE. ATTENTION: POUR MAINTENIR LA PROTECTION CONTRE LES RISQUES D’ INCENDIE UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE 4A, 125V. 4A 125V CAUTION MODEL DS20930 Chassis No. 20930-00