Sanyo DSR-3000P Instruction Manual

DSR-3000P Instruction Manual English GB Bedienungsanleitung Deutsch D Manuel d’instructions Français F Manual de Instrucciones Español E Manuale di Istruzioni Italiano I About this manual Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference. Über diese Anleitung Lesen Sie bitte diese Bedienungsanleitung vor der Installation und der Verwendung des Gerätes sorgfältig durch. Bewahren Sie die Anleitung zum späteren Nachschlagen auf. À propos de ce manuel Avant d’installer et d’utiliser cet appareil, veuillez lire ce manuel attentivement. Assurez-vous de le garder à portée de la main pour référence ultérieure. Acerca de este manual Antes de instalar y usar este aparato, lea detenidamente este manual. Asegúrese de guardarlo a mano para futuras referencias. Nota su questo manuale Leggere attentamente questo manuale prima di passare all’installazione ed all’uso di questo apparecchio. Conservare il manuale in un posto sicuro per riferimenti futuri.

ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. If the power supply cord (AC power cord) of this appliance is damaged, it must be replaced. Return to a SANYO Authorised Service Centre for replacement of the cord. Location For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. Install the unit in a horizontal position only. Avoid locations subject to strong vibrations. Avoid moving the unit between cold and hot locations. Do not place the unit directly on top of a monitor TV, as this may cause playback or recording problems. Avoiding Electrical Shock and Fire Do not handle the power cord with wet hands. Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug. If any liquid is spilled on the unit, unplug the power cord immediately and have the unit inspected at a factory-authorised service centre. Do not place anything directly on top of this unit. SERVICE This unit is a precision instruments and if treated with care, will provide years of satisfactory performance. However, in the event of a problem, the owner is advised not to attempt to make repairs or open the cabinet. Servicing should always be referred to your dealer or Sanyo Authorized Service Centre. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacture’s instructions. English 1

4 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PART NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Front panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Basic connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 System control connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connecting a remote control circuit . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Digital multiplexer connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Digital series connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 BUILT-IN HARD DISK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Recording speed tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Operating display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 RECORDING IMAGES IN THE NORMAL RECORDING AREA . . . 12 Normal recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Timer recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 RECORDING IMAGES IN THE ALARM RECORDING AREA . . . . . 15 Alarm recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Pre-alarm recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PLAYING BACK IMAGES RECORDED IN THE NORMAL RECORDING AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 SEARCHING FOR RECORDED IMAGES. . . . . . . . . . . . . . . . . . . . . 23 SAVING (COPYING) RECORDED IMAGES . . . . . . . . . . . . . . . . . . . 32 Copying images to the hard disk archive area . . . . . . . . . . . . . . . . . . 32 Copying images from archive area to a CompactFlash card . . . . . . 33 CompactFlash recording area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Copying to a DDS (Digital Data Storage) drive. . . . . . . . . . . . . . . . . . 35 MENU FLOW CHART AND MENU OPERATIONS. . . . . . . . . . . . . . 38 MENU flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Basic menu screen operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Operations while a sub-menu screen is displayed . . . . . . . . . . . . . . 39 LANGUAGE/CLOCK SET SETTINGS . . . . . . . . . . . . . . . . . . . . . . . 40 Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 CLOCK SET settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 SUMMER TIME SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 EXT. CLOCK SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 VIDEO INPUT SET SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 MULTIPLEXER setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 VIDEO INPUT setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 RECORDING AREA SET SETTING . . . . . . . . . . . . . . . . . . . . . . . . . 43 TOTAL CAPACITY display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Resetting each recording area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 AREA FULL RESET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 2 English

Recording settings for digital series connection (maximum 3 units). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Setting NORMAL RECORDING AREA OVERWRITE and REMAINING DISK WARNING on the operating display section . . . . 46 NORMAL REC MODE SET SETTING. . . . . . . . . . . . . . . . . . . . . . . . 47 NORMAL REC MODE SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 TIMER SET SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 TIMER SET setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Timer reservations every day at the same time with the same image quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Timer reservations spanning more than 24 hours . . . . . . . . . . . . . . . 50 HOLIDAY SET SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 HOLIDAY SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 ALARM REC MODE SET SETTING . . . . . . . . . . . . . . . . . . . . . . . . . 52 ALARM REC MODE SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Pre-alarm recording setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Alarm trigger setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Built-in motion sensor settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 DISPLAY SET SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 DISPLAY SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 VIDEO LOSS SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 RS-232C/RS-485 SET SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 RS-232C/RS-485 SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 RS-232 Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 RS-485 Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 BUZZER SET SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 SECURITY LOCK SET SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Operating privileges and security lock . . . . . . . . . . . . . . . . . . . . . . . . 61 A Administrator password setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 B User password setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 C Recording and playback operating privilege setting . . . . . . . . . . . . 63 D Security lock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 NETWORK SET SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 NETWORK SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 PASSWORD SETTING setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 HDD SET SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 HDD SET setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Adding a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 POWER FAILURE/USED TIME DISPLAY . . . . . . . . . . . . . . . . . . . . 68 INTERFACE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 English 3

a monitoring camera onto its built-in hard disk. • Equipped with a large-capacity 3.5-inch hard disk drive. • Recording and playback of images can be carried out using digital signals from a multiplexer. • Playback can be carried out at the same time as recording. • Alarm recording tracks movements of suspicious individuals. • Timer recording lets you record different sessions each day. • Pre-alarm recording records the images immediately before an alarm. • Audio recording and playback is also possible. • Has a built-in motion detector function that can trigger alarm recording when movement is detected. • Recorded images can be copied using CompactFlash cards. • Includes a variety of search functions.  Alarm searching using an alarm event list or thumbnail alarm images  Time and date searches based on recording date and time  Motion sensor detecting by searching for the movement of a suspicious individual • A zoom function allows images being monitored or played back to be enlarged for display. • Images can be captured by field or by frame. • The image quality mode can be selected from five modes for both field and frame. • Three levels of security lock are available. • A PCMCIA-compatible network card can be used to carry out network control. • Includes an RS-232C interface for computer control. • Connection to a system controller (sold separately) is possible using an RS-485 interface. • A PCMCIA-compatible SCSI card can be used for backups to DDS (DAT) drives. Setting-up environment Leave a space of at least 5 cm between the digital video recorder and other nearby objects. Ventilation holes are located at both sides and on the base of the digital video recorder. Do not allow these ventilation holes to be covered when setting up the recorder. Furthermore, avoid using the digital video recorder in places with poor ventilation. ACCESSORIES Power cord Ferrite core Fixer power cord tie Hard disk protection If any hard disk format errors are found when the power is turned on, the whole hard disk is checked automatically. If any further problems are found with the hard disk, the POWER indicator flashes. Please contact the place of purchase if you need to reformat the hard disk or make backups of any images. The hard disk is very sensitive to dust, vibration and shocks, and it should not be used in places near sources of magnetic fields. Be sure to observe the following points in order to prevent any loss of data. • Do not subject the digital video recorder to shocks. • Do not use the digital video recorder in places where it will be subjected to vibration or places which are unstable. • Do not disconnect the power cord while recording or playback is in progress. • Do not use in places which are subject to rapid changes in temperature (changes of around 10°C in an hour). • If the digital video recorder is moved to a place with a large difference in temperature or a high level of humidity, condensation may form. If the digital video recorder is used with condensation inside it, operating problems may occur. • Do not install the digital video recorder in places which are constantly vibrating, such as vehicles or trains. The hard disk and cooling fan are consumables. • These parts should generally be replaced after 2 years of use (for the hard disk) or 3 years of use (for the cooling fan) at normal temperatures of 25°C. These periods of time are intended as guides only, and are not a guarantee of product performance. For important recordings • Always check whether a recording has been recorded properly. • In case a recording was not recorded properly with this unit because of faulty connections with other equipment or a correct playback is not possible, any claims for compensation will be declined. • For important recordings, it is recommended to make a periodical backup copy for protection against loss from any malfunction or accident. 4 English

Illuminates when the power cord plug is inserted into a wall outlet. Flashes when there is a problem with the hard disk or fan. 2 FULL indicator Flashes when the remaining space in the normal recording area of the hard disk drops to 1%*. (* This can be changed using the menu settings.) 3 ALARM FULL indicator Flashes when the remaining space in the alarm recording area of the hard disk drops to 1%*. (* This can be changed using the menu settings.) 4 LOCK indicator Illuminates when the security lock is engaged and operations are locked. If a button is pressed while the lock is engaged, the buzzer sounds and the indicator illuminates. 5 ALARM indicator Illuminates during pre-alarm recording. Flashes during alarm recording. 6 MENU button and indicator Used to display the menu screens (setting screens). 7 ZOOM button and indicator Used to display the zoom screen during monitoring and playback. The indicator illuminates when the zoom screen is displayed. This does not operate when a multiplexer is connected digitally in series. 8 CHANNEL button and indicator If the digital video recorder is connected to a Sanyo multiplexer that allows decoding of channel information (camera numbers), channels can be specified so that only those channels are played back. The indicator illuminates during playback. The CHANNEL button can only be used during still mode. 9 REC/STOP button and indicator Use to start normal recording. The indicator illuminates during recording. If the button is pressed for 2 seconds or more during recording, recording stops and the indicator switches off. F EXIT/OSD button and indicator • When a menu screen is displayed The main menu or sub-menu is exited. • During recording or playback When the button is pressed during recording or playback, superimposed information such as time and date and alarm status changes in the following order: Displayed at top-left → Displayed at bottom-left → Displayed at top-right → Displayed at bottom-right → Off. The indicator illuminates while information is displayed. G SEARCH FRAME/FIELD button and indicator • During recording or when stopped When the button is pressed during recording or when the digital video recorder is stopped, the indicator illuminates and search playback is possible. • During playback When the button is pressed during playback, the indicator illuminates and the mode change to frame/field playback mode. H COPY button and indicator Used to copy images to the archive area of the hard disk or to a CompactFlash card or microdrive. The indicator illuminates during copying. I TIMER button and indicator When the button is pressed when recording is stopped, the digital video recorder switches to timer recording standby mode, and when the setting time is reached, timer recording starts. J PLAY/STOP button and indicator When the button is pressed, the indicator illuminates and playback of images in the normal recording area starts. If pressed during playback, playback stops. K STILL button and indicator When this button is pressed during playback, the indicator illuminates and playback pauses. If it is pressed again, playback resumes. L SHUTTLE HOLD button and indicator This locks the speed for playback and frame advance. The indicator illuminates while locked. M ALARM buttons (û ALARM ù) When these buttons are pressed during playback, playback skips to the previous or next alarm recording. N Jog (inner) and shuttle (outer) dials • During playback The jog dial changes the playback speed. The shuttle dial fast-forwards and rewinds. • Menu screens The jog dial moves the cursor and changes settings. The shuttle dial accepts settings. O CompactFlash card slot Insert a CompactFlash card or microdrive here. P MENU RESET button Reinitializes menu settings. POWER FULL ALARM FULL LOCK ALARM MENU EXIT/OSD PLAY/STOP ZOOM SEARCH FRAME/FIELD STILL CHANNEL COPY SHUTTLE HOLD REC/STOP TIMER ALARM JOG SHUTTLE E N T E R C L E A R 1 2 3 4 5 7 8 6 FGJK N 9 IH M L O P English 5

Connect a network card or SCSI card (sold separately) here. 2 MIC IN terminal 3 AUDIO IN terminal 4 AUDIO OUT terminal 5 S-VIDEO IN terminal 6 S-VIDEO LOOP OUT terminal 7 S-VIDEO OUT terminal 8 VIDEO IN terminal Images being input to the S-VIDEO IN terminal take priority. 9 VIDEO LOOP OUT terminal F VIDEO OUT terminal G DIGITAL VIDEO IN terminal H DIGITAL VIDEO OUT terminal I DIGITAL VIDEO SUB IN terminal J DIGITAL VIDEO SUB OUT terminal K RS-232C terminal L ALL RESET button M RS-485 termination switch N Control connector Pin Signal C Ground A RS-485 connector* B RS-485 connector* C Ground REMOTE Remote control input C Ground NC Spare NC Spare C Ground SW OUT Switching output C Ground * Used for twisted-pair cable connection. O Alarm connector Pin Signal C Ground ALARM IN Alarm input ALARM RESET Alarm reset input ALARM OUT Alarm output NON REC OUT Non-rec output C Ground CLOCK ADJUST IN Clock sync input (See page 41.) CLOCK ADJUST OUT Clock sync output (See page 41.) WARNING OUT Hard disk error warning output FULL Hard disk space warning output ALARM OUT Alarm recording area space warning output P AC power socket (AC IN~) Securely insert the accessory power cord here. Q Power cord holder Secure the power cord to the holder using the accessory cord tie as shown in the illustration. AC IN RS232C ALARM FULL SW OUT WARNING OUT FULL OUT IN ALARM OUT CLOCK ADJUST C C C NC C NON REC OUT ALARM IN ALARM RESET NC C C OFF ALL RESET RS485 TERMINATE B A ON C RS485 REMOTE SUB OUT OUT DIGITAL VIDEO AUDIO S-VIDEO SUB IN IN OUT OUT LOOP OUT LOOP OUT IN OUT IN MIC IN IN EJECT PC Card SLOT 2 3 4 O P N M L K J I H G F 9 8 7 6 5 1 Q 6 English

If the connections are incorrect, smoke or operating malfunctions may result. Basic connections System control connections Use a twisted-pair cable (sold separately) to connect a system controller to control terminals A, B and C (ground) of the digital video recorder. Connect signal A to signal A and signal B to signal B. Connecting a remote control circuit If a remote control circuit is constructed as shown in the illustration and connected to the REMOTE control input terminals of the control connector, the digital video recorder can be operated by remote control. AC IN RS232C ALARM FULL SW OUT WARNING OUT FULL OUT IN ALARM OUT CLOCK ADJUST C C C NC C NON REC OUT ALARM IN ALARM RESET NC C C OFF ALL RESET RS485 TERMINATE B A ON C RS485 REMOTE SUB OUT OUT DIGITAL VIDEO AUDIO S-VIDEO SUB IN IN OUT OUT LOOP OUT LOOP OUT IN OUT IN MIC IN IN EJECT PC Card SLOT AUDIO IN Microphone input Video camera (sold separately) TV monitor (sold separately) VIDEO IN connector TV monitor (sold separately) S-VIDEO IN connector Computer 32C SW OUT C C NC NC C C OFF ALL RESET RS485 TERMINATE B A ON C RS485 REMOTE Push and insert cables Twisted-pair cable Ground To signal A To signal B System controller (sold separately) RS-485 connector SW OUT C C NC NC C C OFF ALL RESET RS485 TERMINATE B A ON C RS485 REMOTE SW 1: REC STOP SW 2: PLAY STOP SW 3: PAUSE SW 4: SEARCH SW 5: CHANNEL SW 6: PLAY SW 7: REC SW 8: MENU SW 9 : EXIT/OSD SW 14 : ZOOM SW 15 : COPY SW 16 : TIMER 220Ω 220Ω 300Ω 360Ω 470Ω 680Ω 820Ω 1.2kΩ 1.8kΩ 2.2kΩ 3.3kΩ 4.7kΩ 7.5kΩ 13kΩ 27kΩ 68kΩ SW: Switch The remote control cable should be no more than 5 m long. Note: SW 10 : JOG j SW 11 : JOG l SW 12 : SHUTTLE c SW 13 : SHUTTLE d English 7

Connect to a multiplexer (MPX-CD163P or CD93P) that allows digital connections. Digital series connections Up to three digital video recorders can be connected digitally for recording images in series. Note: When digital video recorders are connected digitally in series, the digital input and output terminals can be used to transmit video signals, control signals and switching signals. However audio signals cannot be transmitted in the same way, so if audio signals also need to be recorded, connect the audio input terminals via an amplifier as shown in the connection diagram. AC IN RS232C ALARM FULL SW OUT WARNING OUT FULL OUT IN ALARM OUT CLOCK ADJUST C C C NC C NON REC OUT ALARM IN ALARM RESET NC C C OFF ALL RESET RS485 TERMINATE B A ON C RS485 REMOTE SUB OUT OUT DIGITAL VIDEO AUDIO S-VIDEO SUB IN IN OUT OUT LOOP OUT LOOP OUT IN OUT IN MIC IN IN EJECT PC Card SLOT C IN S-VIDEO 6 2 10 14 5 1 9 13 7 3 11 15 8 4 12 16 TV monitor (sold separately) Multiplexer (sold separately) Alarm input Alarm output DIGITAL IN DIGITAL OUT Ground (C) ✱ Cable (straight-type CAT-5, 3 m or less) AC IN RS232C ALARM FULL SW OUT WARNING OUT FULL OUT IN ALARM OUT CLOCK ADJUST C C C NC C NON REC OUT ALARM IN ALARM RESET NC C C OFF ALL RESET RS485 TERMINATE B A ON C RS485 REMOTE SUB OUT OUT DIGITAL VIDEO AUDIO S-VIDEO SUB IN IN OUT OUT LOOP OUT LOOP OUT IN OUT IN MIC IN IN EJECT PC Card SLOT AC IN RS232C ALARM FULL SW OUT WARNING OUT FULL OUT IN ALARM OUT CLOCK ADJUST C C C NC C NON REC OUT ALARM IN ALARM RESET NC C C OFF ALL RESET RS485 TERMINATE B A ON C RS485 REMOTE SUB OUT OUT DIGITAL VIDEO AUDIO S-VIDEO SUB IN IN OUT OUT LOOP OUT LOOP OUT IN OUT IN MIC IN IN EJECT PC Card SLOT AC IN RS232C ALARM FULL SW OUT WARNING OUT FULL OUT IN ALARM OUT CLOCK ADJUST C C C NC C NON REC OUT ALARM IN ALARM RESET NC C C OFF ALL RESET RS485 TERMINATE B A ON C RS485 REMOTE SUB OUT OUT DIGITAL VIDEO AUDIO S-VIDEO SUB IN IN OUT OUT LOOP OUT LOOP OUT IN OUT IN MIC IN IN EJECT PC Card SLOT Multiplexer (sold separately) Digital video recorder (main) Digital video recorder (sub 1) Digital video recorder (sub 2) 6 2 10 14 5 1 9 13 7 3 11 15 8 4 12 16 TV monitor (sold separately) Amplifier (sold separately) Amplifier (sold separately) 8 English

Hard disk Recording areas The recording areas on the hard disk (normal recording area: 80%, alarm recording area: 19%, archive area: 1%) are established automatically when the power for the digital video recorder is turned on. Images are recorded in the normal recording area when the REC/STOP button is pressed, and they are recorded in the alarm recording area when an alarm occurs. This is called the default condition, and the following detailed settings can be confirmed in the sections on “RECORDING IMAGES IN THE NORMAL RECORDING AREA” and “RECORDING IMAGES IN THE ALARM RECORDING AREA” which are explained later. Furthermore, settings such as the recording areas and picture quality can be changed using the menu screens. A Normal recording area • When the REC/STOP button is pressed while monitoring is in progress, images are recorded in the normal recording area. • When start and end times are entered for each day of the week and are then enabled, timer recording is automatically carried out in the normal recording area between the times that have been set. B Alarm recording area ALARM REC MODE SET menu settings are required. • Alarm recording is enabled when ALARM RECORDING is set. When a suspicious person is detected by the switch or motion sensor that is connected to the alarm input terminal, an alarm is recorded in the alarm recording area. • Pre-alarm recording is enabled when PRE-ALARM RECORDING is set. Pre-alarm recording repeatedly records the same images as for normal recording in the alarm recording area, and overwrites these images after the set time interval, until an alarm is detected. When pre-alarm recording is set, the image immediately before an alarm occurred can be recorded. C Archive area This is the area for copying important images from the normal recording area and the alarm recording area. The size of the archive area can be set to a maximum of 12 GB (15% of total capacity when using an 80-GB hard disk) by changing the size of the normal recording area or the alarm recording area. Archive area C Normal recording area Normal recording area Normal recording area A Alarm Alarm recording area Alarm recording area B Hard disk recording areas 1% 1% 80% 80% 19% 19% 1% 80% 19% Menu screen (initial setting) This can be displayed by pressing the MENU button. 1 Picture quality: ENHANCED Picture quality can be selected from five options. The recording speed changes in accordance with the picture quality selected. 2 Recording method: Can be set to FRAME or FIELD. The recording speed changes in accordance with the method selected. 3 Audio recording: Can be set to ON or OFF. 4 Recording speed: Shows the recording interval and the recording time. Refer to the recording speed table for further details. 5 Alarm recording setting: Can be set to ON or OFF. When alarm recordings are to be made, select a setting such as MODE1 for the OFF setting. The recording speed and alarm duration will be displayed A Setting screen for normal recording area picture quality, recording speed, etc. B Setting screen for alarm recording area picture quality, recording speed, etc. TOTAL CAPACITY : 80GB NORMAL RECORDING AREA : 80 % AREA FULL RESET -> ALARM RECORDING AREA : 19 % AREA FULL RESET -> ARCHIVE AREA : 1 % AREA FULL RESET -> CAUTION : WHEN THE AREA SETTING IS CHANGED. THE WHOLE AREA WILL BE INITIALIZED ! A B A B C PICTURE QUALITY : ENHANCED FRAME/FIELD RECORDING : FIELD AUDIO RECORDING : OFF REC CYCLE : 0.12SEC ( 65H) 1 23 4 PICTURE QUALITY : ENHANCED FRAME/FIELD RECORDING : FIELD AUDIO RECORDING : OFF ALARM RECORDING : OFF REC CYCLE : 0.12SEC. DURATION: 1SEC PRE-ALARM RECORDING : ¤¤¤ REC CYCLE : ¤¤¤ SEC. DURATION: ¤¤¤ => (55682 ALARMS CAN BE RECORDED) ALARM TRIGGER : ALARM MOTION SENSOR -> 1 23 54 English 9

Recording speed tables These recording speed tables show the recording times for various picture quality and frame/field settings when recording in the normal recording area of the hard disk (80 GB). They do not include audio recording settings. The setting times for the normal recording area and the alarm recording area represent the picture quality values given in the recording speed tables, multiplied by the percentages for the normal recording area and alarm recording area that have been set using the recording area setting menu commands. When recording with an 80-GB hard disk at 100% capacity Field recording Recording Rate (field/sec) Recording Cycle (SEC) PICTURE QUALITY BASIC NORMAL ENHANCED FINE SUPER FINE 15 kB 22 kB 30 kB 42 kB 56 kB 50.00 0.02 25H 18H 13H 9H 7H 25.00 0.04 51H 36H 27H 19H 14H 16.67 0.06 76H 54H 40H 29H 22H 12.50 0.08 102H 72H 54H 39H 29H 8.33 0.12 153H 108H 81H 59H 44H 6.25 0.16 204H 144H 108H 78H 59H 5.00 0.20 255H 180H 135H 98H 74H 4.17 0.24 306H 217H 162H 118H 89H 3.57 0.28 357H 253H 189H 138H 104H 3.13 0.32 408H 289H 217H 157H 119H 2.78 0.36 459H 325H 244H 177H 134H 2.50 0.40 510H 361H 271H 197H 149H 2.27 0.44 561H 397H 298H 217H 164H 1.92 0.52 663H 470H 352H 256H 194H 1.67 0.60 765H 542H 406H 295H 224H 1.47 0.68 868H 614H 461H 335H 254H 1.32 0.76 970H 687H 515H 374H 284H 1.19 0.84 1072H 759H 569H 414H 314H 1.09 0.92 1174H 831H 623H 453H 344H 1.00 1 1276H 904H 678H 493H 374H 0.50 2 2553H 1808H 1356H 986H 748H 0.33 3 3829H 2712H 2034H 1479H 1122H 0.25 4 5106H 3616H 2712H 1972H 1496H 0.20 5 6382H 4521H 3390H 2466H 1870H 0.10 10 12765H 9042H 6781H 4932H 3741H 0.05 20 25531H 18084H 13563H 9864H 7483H 0.03 30 38296H 27126H 20345H 14796H 11224H Frame recording Recording Rate (frame/sec) Recording Cycle (SEC) PICTURE QUALITY BASIC NORMAL ENHANCED FINE SUPER FINE 15 kB 22 kB 30 kB 42 kB 56 kB 25.00 0.04 25H 18H 13H 9H 7H 12.50 0.08 51H 36H 27H 19H 14H 8.33 0.12 76H 54H 40H 29H 22H 6.25 0.16 102H 72H 54H 39H 29H 4.17 0.24 153H 108H 81H 59H 44H 3.13 0.32 204H 144H 108H 78H 59H 2.50 0.40 255H 180H 135H 98H 74H 2.08 0.48 306H 217H 162H 118H 89H 1.79 0.56 357H 253H 189H 138H 104H 1.56 0.64 408H 289H 217H 157H 119H 1.39 0.72 459H 325H 244H 177H 134H 1.25 0.80 510H 361H 271H 197H 149H 1.14 0.88 561H 397H 298H 217H 164H 0.96 1.04 663H 470H 352H 256H 194H 0.83 1.20 765H 542H 406H 295H 224H 0.74 1.36 868H 614H 461H 335H 254H 0.66 1.52 970H 687H 515H 374H 284H 0.60 1.68 1072H 759H 569H 414H 314H 0.54 1.84 1174H 831H 623H 453H 344H 0.50 2 1276H 904H 678H 493H 374H 0.25 4 2553H 1808H 1356H 986H 748H 0.17 6 3829H 2712H 2034H 1479H 1122H 0.13 8 5106H 3616H 2712H 1972H 1496H 0.10 10 6382H 4521H 3390H 2466H 1870H 0.05 20 12765H 9042H 6781H 4932H 3741H 0.03 40 25531H 18084H 13563H 9864H 7483H 0.02 60 38296H 27126H 20345H 14796H 11224H The tables below are recording speed tables provided for reference if the total capacity of the hard disk has been increased to 160 GB. Contact the place of purchase for details on increasing the capacity of the hard disk. When recording with a 160-GB hard disk at 100% capacity Field recording Recording Rate (field/sec) Recording Cycle (SEC) PICTURE QUALITY BASIC NORMAL ENHANCED FINE SUPER FINE 15 kB 22 kB 30 kB 42 kB 56 kB 50.00 0.02 51H 36H 27H 19H 14H 25.00 0.04 102H 72H 54H 39H 29H 16.67 0.06 153H 108H 81H 59H 44H 12.50 0.08 204H 144H 108H 78H 59H 8.33 0.12 306H 217H 162H 118H 89H 6.25 0.16 408H 289H 217H 157H 119H 5.00 0.20 510H 361H 271H 197H 149H 4.17 0.24 612H 434H 325H 236H 179H 3.57 0.28 714H 506H 379H 276H 209H 3.13 0.32 816H 578H 434H 315H 239H 2.78 0.36 919H 651H 488H 355H 269H 2.50 0.40 1021H 723H 542H 394H 299H 2.27 0.44 1123H 795H 596H 434H 329H 1.92 0.52 1327H 940H 705H 512H 389H 1.67 0.60 1531H 1085H 813H 591H 448H 1.47 0.68 1736H 1229H 922H 670H 508H 1.32 0.76 1940H 1374H 1030H 749H 568H 1.19 0.84 2144H 1519H 1139H 828H 628H 1.09 0.92 2348H 1663H 1247H 907H 688H 1.00 1 2553H 1808H 1356H 986H 748H 0.50 2 5106H 3616H 2712H 1972H 1496H 0.33 3 7659H 5425H 4069H 2959H 2244H 0.25 4 10212H 7233H 5425H 3945H 2993H 0.20 5 12765H 9042H 6781H 4932H 3741H 0.10 10 25531H 18084H 13563H 9864H 7483H 0.05 20 51062H 36168H 27126H 19728H 14966H 0.03 30 76593H 54253H 40690H 29592H 22449H Frame recording Recording Rate (frame/sec) Recording Cycle (SEC) PICTURE QUALITY BASIC NORMAL ENHANCED FINE SUPER FINE 15 kB 22 kB 30 kB 42 kB 56 kB 25.00 0.04 51H 36H 27H 19H 14H 12.50 0.08 102H 72H 54H 39H 29H 8.33 0.12 153H 108H 81H 59H 44H 6.25 0.16 204H 144H 108H 78H 59H 4.17 0.24 306H 217H 162H 118H 89H 3.13 0.32 408H 289H 217H 157H 119H 2.50 0.40 510H 361H 271H 197H 149H 2.08 0.48 612H 434H 325H 236H 179H 1.79 0.56 714H 506H 379H 276H 209H 1.56 0.64 816H 578H 434H 315H 239H 1.39 0.72 919H 651H 488H 355H 269H 1.25 0.80 1021H 723H 542H 394H 299H 1.14 0.88 1123H 795H 596H 434H 329H 0.96 1.04 1327H 940H 705H 512H 389H 0.83 1.20 1531H 1085H 813H 591H 448H 0.74 1.36 1736H 1229H 922H 670H 508H 0.66 1.52 1940H 1374H 1030H 749H 568H 0.60 1.68 2144H 1519H 1139H 828H 628H 0.54 1.84 2348H 1663H 1247H 907H 688H 0.50 2 2553H 1808H 1356H 986H 748H 0.25 4 5106H 3616H 2712H 1972H 1496H 0.17 6 7659H 5425H 4069H 2959H 2244H 0.13 8 10212H 7233H 5425H 3945H 2993H 0.10 10 12765H 9042H 6781H 4932H 3741H 0.05 20 25531H 18084H 13563H 9864H 7483H 0.03 40 51062H 36168H 27126H 19728H 14966H 0.02 60 76593H 54253H 40690H 29592H 22449H Reference: 24H = 1 day, 168H = 1 week, 720H = 1 month, 8760H = 1 year 10 English

Operating display When the power for the digital video recorder is turned on, the operating display appears in the upper-left corner of the monitor screen. This operating display shows information which is essential for operation, such as the date, time, picture quality and recording speed. 1 Camera number display Connect the digital video recorder to a multiplexer that is capable of decoding Sanyo’s channel information (camera number) and press the CHANNEL button. The number of the specified camera appear in the display during playback. 2 Date display When the digital video recorder is first turned on, the date appears as 01-01-01 (day, month, year). Make sure that you use the menus to set the correct date. 3 Operating symbol display These symbols appear during recording and playback. a : Recording e : Fast forward c : Playback f : Rewind d : Reverse playback h : Stopped hc : Slow playback dh : Slow reverse playback Note: If recording and playback are being carried out at the same time, the playback symbol (c) appears. 4 Amount of recording area remaining If overwriting has been disabled (OVERWRITE: OFF) in the normal recording area or alarm recording area, the amount of space remaining appears as a percentage. You can change the amount of recording area remaining using the RECORDING CONDITIONS SET menu item. (See page 45.) 5 Alarm display and alarm number display When an alarm setting is made using the ALARM REC MODE SET menu item, The following display appears in the alarm display. However, the PRE display appears when pre-alarm recording has been set. When an alarm occurs, the PRE is replaced by ALARM and the number of alarms also appears. The alarm display shows the cumulative number of alarms. • If ALARM RECORDING is set: ALARM appears. ALARM flashes while an alarm is being recorded. • If PRE-ALARM RECORDING is set: PRE appears. • When playing images from the archive area: ARCHIV appears. 6 Time display When the digital video recorder is first turned on, the time appears as 00:00:00, and the time starts counting after the date has been set. The digital video recorder uses the date and time to control recording and playback, so if the date and time have not been set, the correct images cannot be retrieved. Make sure that you use the menus to set the correct time. 7 Picture quality display This shows the picture quality for images that are recorded on the hard disk. The default setting is EN (Enhanced). The display changes when the picture quality is changed using the NORMAL REC MODE SET menu item. • BA: Basic • NO: Normal • EN: Enhanced • FI: Fine • SF: Super Fine 8 Recording speed display This displays the recording speed for images that are recorded on the hard disk. The default setting is 0.12 SEC (during field recording). The display changes when the picture quality and recording method are changed using the NORMAL REC MODE SET menu item. 01-01-01 ALARM 0000 00:00:00 EN 0.12SEC 4CH 100% 01-01-01 ALARM 0000 00:00:00 EN 0.12SEC 1 6 2 3 4 5 7 8 Note: During recording with this unit, playing back, copying and transferring pictures is possible. However, because of the recording priority the response of the other operations becomes slower. English 11

NORMAL RECORDING AREA Normal recording Images can be recorded in the normal recording area while they are being monitored. Insert the power cord into a wall outlet and turn on the power. The POWER indicator illuminates, and after approximately 15 seconds, the EXIT/OSD indicator illuminates. The camera images appear on the monitor, and the operating display appears in the top-left corner of the screen. Note: The operating display can be moved or switched off by pressing the EXIT/OSD button repeatedly. See page 11 for details of the operating display. Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and time. After the setting has been made, press the EXIT/OSD button, the date and time appear in the operating display. (See page 40.) Press the REC/STOP button. “a” appears in the operating display and the images being monitored are recorded in the normal recording area. Recording onto the hard disk proceeds automatically (default setting) according to the following settings. The settings can be changed between long-period recording and high-quality recording in five steps. (See page 47.) • Hard disk recording areas: Normal recording area: 80% Alarm recording area: 19% Archive area: 1% • Picture quality: EN (Enhanced) • Recording method: Field • Recording speed: 0.12 seconds (65H) Note: Playback is possible during recording. When the PLAY/STOP button is pressed during recording, “c” appears in the operating display and images are played back from the point where recording began. (See page 19.) Press and hold the REC/STOP button for 3 seconds or more. The “a” in the operating display disappears and recording stops. Note: When the remaining area in the normal recording area drops below the set amount, the FULL indicator on the front panel flashes. If recording continues under these conditions, the recording area becomes full and recording stops. In the RECORDING AREA SET settings, carry out the AREA FULL RESET operation for the normal recording area. Recording will then be possible from the beginning again. (See page 44.) POWER EXIT/OSD 1 Operating display 01-01-01 00:00:00 EN 0.12SEC MENU 2

1.LANGUAGE/CLOCK SET -> 2.VIDEO INPUT SET -> 3.RECORDING AREA SET -> 4.RECORDING CONDITIONS SET -> ENGLISH 01-01-2001 MON 00:00:00 S S REC/STOP 3 26-10-01 10:48:38 EN 0.12SEC 26-10-01 11:02:28 EN 0.12SEC Recording start time REC/STOP 4 POWER FULL ALARM FULL LOC Monitored images are recorded. 12 English

Timer recording The monitored images can be recorded automatically by setting start and end times for each day of the week. Insert the power cord into a wall outlet and turn on the power. The POWER indicator illuminates, and after approximately 15 seconds, the EXIT/OSD indicator illuminates. The camera images appear on the monitor, and the operating display appears in the top-left corner of the screen. Note: The operating display can be moved or switched off by pressing the EXIT/OSD button repeatedly. See page 11 for details of the operating display. 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and time. After the setting has been made, press the EXIT/OSD button, the date and time appear in the operating display. (See page 40.) 2 Set the timer. Press the MENU button to display the TIMER SET menu, and then set the start and end times for timer recording. (See page 48.) Then press the EXIT/OSD button. Press the TIMER button. The TIMER indicator illuminates and the digital video recorder switches to timer recording standby mode. Note: • If SET in the TIMER SET menu is not set to “ON”, or if the timer settings are not made correctly, an alarm will sound when the TIMER button is pressed. • The TIMER indicator illuminates when the timer setting has been made correctly. • When the timer setting time is reached, the TIMER indicator and the REC indicator illuminate and timer recording starts. • If you press the TIMER button during timer recording, the TIMER indicator and the REC indicator switch off and timer recording stops. POWER EXIT/OSD 1 Operating display 01-01-01 00:00:00 EN 0.12SEC MENU 2

1.LANGUAGE/CLOCK SET -> 2.VIDEO INPUT SET -> 3.RECORDING AREA SET -> 4.RECORDING CONDITIONS SET -> ENGLISH 01-01-2001 MON 00:00:00 S S

1.LANGUAGE/CLOCK SET -> 2.VIDEO INPUT SET -> 3.RECORDING AREA SET -> 4.RECORDING CONDITIONS SET -> 5.NORMAL REC MODE SET -> 6.TIMER SET -> WEEK START STOP REC CYCLE SET SUN --:-- --:-- 0.12SEC ( 65H) OFF MON --:-- --:-- 0.12SEC ( 65H) OFF TUE --:-- --:-- 0.12SEC ( 65H) OFF WED --:-- --:-- 0.12SEC ( 65H) OFF TIMER 3 10-05-01 17:30:25 EN 0.12SEC English 13

reached. “a” appears in the operating display and the images being monitored are recorded in the normal recording area. Recording onto the hard disk proceeds automatically (default setting) according to the following settings. The settings can be changed between long-period recording and high-quality recording in five steps. (See page 47.) • Hard disk recording areas: Normal recording area: 80% Alarm recording area: 19% Archive area: 1% • Picture quality: EN (Enhanced) • Recording method: Field • Recording speed: 0.12 seconds (65H) Note: Playback is possible during recording. When the PLAY/STOP button is pressed during recording, c appears in the operating display and images are played back from the point where recording began. (See page 19.) Timer recording stops when the set end time is reached. The TIMER indicator swithes off and the recording symbol (a) disappears from the operating display and recording stops. Note: • Press the TIMER button to stop timer recording. Timer recording then stops. • When the remaining area in the normal recording area drops below the set amount, the FULL indicator on the front panel flashes. If recording continues under these conditions, the recording area becomes full and recording stops. In the RECORDING AREA SET settings, carry out the AREA FULL RESET operation for the normal recording area. Recording will then be possible from the beginning again. (See page 44.) 4 10-05-01 19:30:00 EN 0.12SEC TIMER 5 POWER FULL ALARM FULL LOC 14 English

ALARM RECORDING AREA Alarm recording Insert the power cord into a wall outlet and turn on the power. The POWER indicator illuminates, and after approximately 15 seconds, the EXIT/OSD indicator illuminates. The camera images appear on the monitor, and the operating display appears in the top-left corner of the screen. Note: The operating display can be moved or switched off by pressing the EXIT/OSD button repeatedly. See page 11 for details of the operating display. 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and time. After the setting has been made, press the EXIT/OSD button, the date and time appear in the operating display. (See page 40.) 2 Set alarm recording. • Press the MENU button to display the ALARM REC MODE SET menu from the MAIN MENU screen. Then change the ALARM RECORDING setting to the desired alarm recording setting (MODE1, 2, 3 or 4) and change the ALARM TRIGGER setting. (See page 52 – 54.) • Press the MENU button, to display the BUZZER SET menu from the MAIN MENU 2 screen, and change the ALARM setting to “ON”. (See page 60.) • Press the EXIT/OSD button to return to the normal screen. Suspicious person detection When an alarm occurs, “ALARM” appears in the operating display, the ALARM indicator flashes and alarm recording (a symbol) starts. Alarm images are recorded in the alarm recording area. Furthermore, the number of alarms in the operating display is increased by one each time an alarm occurs. Note: Normal recording and timer recording stop when an alarm occurs during normal recording or timer recording. Ending alarm recording Recording ends after the end of the alarm duration period (default setting: 1 sec). The “a” and ALARM displays stop flashing and recording stops. Note: When the remaining area in the alarm recording area reaches 1%, the ALARM FULL indicator on the front panel flashes. If recording is continued under these conditions, the recording area is filled and the recording stops. In the RECORDING AREA SET settings, carry out the AREA FULL RESET operation for the alarm recording area. Overwriting will be canceled and recording will be possible from the beginning again. (See page 44.) POWER EXIT/OSD 1 Operating display 01-01-01 00:00:00 EN 0.12SEC MENU 2

1.LANGUAGE/CLOCK SET -> 2.VIDEO INPUT SET -> 3.RECORDING AREA SET -> 4.RECORDING CONDITIONS SET -> ENGLISH 01-01-2001 MON 00:00:00 S S PICTURE QUALITY : ENHANCED FRAME/FIELD RECORDING : FIELD AUDIO RECORDING : OFF ALARM RECORDING : MODE1 REC CYCLE : 0.12SEC. DURATION: 1SEC PRE-ALARM RECORDING : ¤¤¤ REC CYCLE : ¤¤¤ SEC. DURATION: ¤¤¤ => (55682 ALARMS CAN BE RECORDED) ALARM TRIGGER : ALARM MOTION SENSOR -> ALARM 3 10-05-01 ALARM 0001 18:10:25 EN 0.12SEC The number of alarms is counted. 4 POWER FULL ALARM FULL LOC Alarm images are recorded English 15

RECORDING AREA Pre-alarm recording Insert the power cord into a wall outlet and turn on the power. The POWER indicator illuminates, and after approximately 15 seconds, the EXIT/OSD indicator illuminates. The camera images appear on the monitor, and the operating display appears in the top-left corner of the screen. Note: The operating display can be moved or switched off by pressing the EXIT/OSD button repeatedly. See page 11 for details of the operating display. Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and time. After the setting has been made, press the EXIT/OSD button, the date and time appear in the operating display. (See page 40.) Set pre-alarm recording. Press the MENU button to display the ALARM REC MODE SET menu. Set ALARM RECORDING to the desired alarm recording setting (example: MODE1). The *** setting for PRE-ALARM RECORDING will be set to “OFF”, so change it to “ON”. (See page 54.) Press the EXIT/OSD button to return to the normal screen. “PRE” appears in the operating display, the ALARM indicator illuminates and pre-alarm recording starts (the a mark does not appear). The same monitored image as in the normal recording area is recorded repeatedly in the alarm recording area. Recording onto the hard disk proceeds automatically (default setting) according to the following settings. The settings can be changed between long-period recording and high-quality recording in five steps. (See page 47.) • Hard disk recording areas: Normal recording area: 80% Alarm recording area: 19% Archive area: 1% • Picture quality: EN (Enhanced) • Recording method: Field • Recording speed: 0.12 seconds (65H) POWER EXIT/OSD 1 Operating display 01-01-01 00:00:00 EN 0.12SEC MENU 2

1.LANGUAGE/CLOCK SET -> 2.VIDEO INPUT SET -> 3.RECORDING AREA SET -> 4.RECORDING CONDITIONS SET -> ENGLISH 01-01-2001 MON 00:00:00 S S REC/STOP ALARM 3 PICTURE QUALITY : ENHANCED FRAME/FIELD RECORDING : FIELD AUDIO RECORDING : OFF ALARM RECORDING : MODE1 REC CYCLE : 0.12SEC. DURATION: 1SEC PRE-ALARM RECORDING : ¤¤¤ REC CYCLE : ¤¤¤ SEC. DURATION: ¤¤¤ => (55682 ALARMS CAN BE RECORDED) ALARM TRIGGER : ALARM MOTION SENSOR -> 10-05-01 PRE 0000 18:10:25 EN 0.12SEC Pre-alarm images are recorded Monitored images are recorded 16 English

When an alarm is received, pre-alarm recording stops automatically and the alarm images are recorded. The “PRE” disappears from the operating display, “ALARM” flashes and the ALARM indicator flashes. Note: When the remaining area in the alarm recording area reaches 1%, the ALARM FULL indicator on the front panel flashes. If recording is continued under these conditions, the recording area is filled and the recording stops. In the RECORDING AREA SET settings, carry out the AREA FULL RESET operation for the normal recording area. Recording will then be possible from the beginning again. (See page 44.) ALARM 4 10-06-01 ALARM 0000 09:30:15 EN 0.12SEC POWER FULL ALARM FULL LOC English 17

THE NORMAL RECORDING AREA The digital video recorder can play back recorded images in the normal recording area (normal recording, timer recording). Playback operations Normal playback • When playing back recordings for the first time: The recorded images will be played back from the beginning. • When playing back for the second or subsequent time: Playback will start from the point where the last playback session ended. (Starting point for first playback) Ending point (Starting point for second playback) Ending point (Starting point for third playback) Ending point PLAY/STOP SEARCH ALARM FRAME/FIELD STILL ZOOM SHUTTLE HOLD SHUTTLE HOLD b Skipping to the previous or next alarm (See page 24.) b Switching between frame and field (See page 22.) b Still image (See page 21.) b Zooming images (See page 20.) b Playback (See page 19.) b Frame advance (forward/reverse) (See page 21.) b Slow playback (See page 19.) Normal recording area Fast forward/fast rewind playback (See page 19.) Locking speed for fast forward/rewind playback (See page 19.) Releasing speed lock 18 English

RECORDING AREA Playback Press the PLAY/STOP button. c appears in the operating display and the images recorded in the normal recording area are played back. Note: • Image playback starts from the point (time) that the recording started. If there is no starting position, or if a reset has been made, the oldest recorded image is played back. • When playback is finished, playback mode is automatically paused. The pause (h) symbol appears in the operating display and the STILL indicator illuminates. • If playback has been carried out at least once, playback will start from the position where the last playback session ended. Press the PLAY/STOP button again. Playback stops. Note: If playback is started just as recording is being carried out, recording will have priority, so that the playback images may be paused momentarily. Fast forward/rewind playback Turn the shuttle dial clockwise (or counterclockwise) during playback. When the shuttle dial is turned clockwise, e appears in the operating display and fast forward playback starts. If it is turned counterclockwise, f appears in the operating display and rewind playback starts. When you release the shuttle dial, normal playback resumes. PLAY/STOP 1 26-10-01 11:02:50 EN 0.12SEC PLAY/STOP 2 20-11-01 04:00:00 EN 0.12SEC 1 17-11-01 02:38:00 EN 0.12SEC 2 SHUTTLE HOLD Changing the playback speed (Fast forward/slow playback) 1 Turn the jog dial clockwise. Fast forward playback starts and e appears in the operating display. 2 Turn the jog dial counterclockwise. Slow playback starts and hc appears in the operating display. 3 Return to normal playback. Turn the jog dial clockwise. c appears in the operating display. (Rewind/slow playback) 1 Turn the shuttle dial counterclockwise (fix at rewind). d will be displayed, so press the SHUTTLE HOLD button. The SHUTTLE HOLD indicator will illuminate and the rewind playback speed will be fixed at the current speed. 2 Turn the jog dial counterclockwise. The speed becomes faster than for normal rewind playback, and f appears in the operating display. 3 Turn the jog dial clockwise. Slow rewind playback starts and dh appears in the operating display. 4 Return to normal playback. Turn the jog dial counterclockwise. c appears in the operating display. English 19

RECORDING AREA Zooming the image during playback Press the ZOOM button during playback. The zoom frame (blue) appears in the center of the screen. Move the zoom frame to the position where the image is to be enlarged. • Turn the jog dial clockwise to move the zoom frame to the right. Turn it counterclockwise to move the zoom frame to the left. • Turn the shuttle dial clockwise to change to vertical movement. Then turn the jog dial clockwise to move the zoom frame upward and turn it counterclockwise to move the zoom frame downward. Move the zoom frame to the position to be enlarged. Turn the shuttle dial. The area inside the zoom frame is enlarged (2x). Press the ZOOM button (to cancel zooming). The image zooming is canceled and normal playback continues. Note: • The display cannot be enlarged even while monitoring a camera image. • The ZOOM button cannot be selected, when a multiplexer is used as a video input. • The picture quality becomes coarser when the image is zoomed. ZOOM 1 2 3 17-11-01 02:36:00 EN 0.12SEC ZOOM 4 17-11-01 02:36:00 EN 0.12SEC 20 English

RECORDING AREA Viewing still images Press the STILL button during playback. h appears in the operating display and a still image is displayed. Press the STILL button once more. Still mode is canceled. Frame advance (forward/reverse) Turn the jog dial clockwise (or counterclockwise) in still mode. Turn the jog dial clockwise to advance the still image by one frame (one field). Turn it counterclockwise to rewind the still image by one frame (one field). Note: If the jog dial is turned quickly, the frame feed speed also increases. STILL 1 17-11-01 02:38:00 EN 0.12SEC STILL 2 17-11-01 02:38:20 EN 0.12SEC 1 17-11-01 02:50:08 EN 0.12SEC During the following operations the picture may appear distorted or momentarily frozen. This is normal and not a malfunction. • During the continuous playback from the normal and the alarm recording area, the picture may be distorted when the recording area is switched. • When playing back during an alarm recording, during continuous playback from the normal and alarm recording area, during normal playback or when using the fast forward/rewind playback the picture may appear momentarily frozen. English 21

RECORDING AREA Selecting a camera image channel for playback When the digital video recorder has been connected to a multiplexer (sold separately) and camera images have been recorded, you can specify the channel (camera number) for the images recorded and play them back. Press the CHANNEL button while playback is paused. The screen for selecting the camera number for cameras connected to the multiplexer appears. Use the jog dial to specify the channel (example: camera 4). Turn the shuttle dial clockwise. “c” appears in the operating display, and playback of images from the specified channel starts. Note: • If the digital video recorder is not connected to a multiplexer that allows decoding of channel information (camera numbers), channels can not be specified for playback. • When this operation is carried out, only the specified channel is played back, and so other channels are not displayed. • When a channel is selected, the multiplexer title information and date information may not be fully displayed in some cases. Switching between frame and field playback Press the SEARCH FRAME/FIELD button while frame recording images are being played back. The screen changes between frame and field playback each time the button is pressed. Note: • Switching between frame and field playback is only possible when images that have been recorded in frame mode are being played back. • When playing back of frame recording images that contain rapid movement, instability may occur in the images. CHANNEL 1 PLEASE SELECT CHANNEL -- CHANNEL CHANGE WITH JOG. SET WITH SHUTTLE 2 PLEASE SELECT CHANNEL 4 CHANNEL CHANGE WITH JOG. SET WITH SHUTTLE 3 CH4 27-10-01 13:38:33 SF 0.03SEC SEARCH FRAME/FIELD 1 22 English

Images that have been recorded in the alarm recording area and in the archive area can be played back. Furthermore, images can also be searched for by recording date and time, and you can also search for moving objects that have been detected by a motion sensor during image playback. SEARCH FRAME/FIELD 0109 0108 0107 0106 0105 0104 0103 0102 0101 NO DATE TIME TOTAL ALARM 0108 13-12 11:13 0234 0107 13-12 11:15 0106 13-12 15:19 0105 15-12 10:13 0104 16-12 16:13 0103 16-12 11:13 0102 19-12 14:23 0101 20-12 05:37 MOVE:JOG SELECT:SHUTTLE RECORDING TOP : 15-12-00 08:00 RECORDING END : 22-12-00 17:00 SEARCH : DATE TIME 20-12-00 05:37 PREVIEW -> VIEW -> CHANGE:JOG SET:SHUTTLE NO DATE START CAPACITY 0108 13-12 11:13 TOTAL - 1024MB 0107 13-12 11:15 USED - 400MB 0106 13-12 15:19 0105 15-12 10:13 0104 16-12 16:13 0103 16-12 11:13 0102 19-12 14:23 0101 20-12 05:37 MOVE:JOG SELECT:SHUTTLE ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> MOVE:JOG SELECT:SHUTTLE - - - - - - - - - - - - - - - - - - - - - - - ú ú ú - - - - - - - ú ú ú - - - - - - - ú ú ú - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - LEVEL : 6 EXIT SEARCH FROM : NORMAL / CHANNEL : 4 START : 28-10-01 08:00 END : 28-10-01 20:00 MOTION SENSOR -> PREVIEW -> VIEW -> MOVE:JOG SELECT:SHUTTLE SEARCH FROM : NORMAL / CHANNEL : 4 START : 28-10-01 10:00 END : 28-10-01 20:00 MOTION SENSOR -> PREVIEW -> VIEW -> MOVE:JOG SELECT:SHUTTLE a Alarm search (See page 24.) a Alarm image thumbnail search (See page 25.) a Time/date search (See page 26.) a Archive area search (See page 28.) a Motion detection search (See page 29.) Preview display Single-screen display Single-screen display Single-screen display Single-screen display Motion sensor setting Single-screen display Thumbnail display Preview display Preview display Date/time search of an image for motion detection Preview display Archive area Alarm recording area Alarm image search and playback Playing back images saved (copied) in the archive area Searching and playing back recorded images by date/time Alarm image thumbnail search and playback Searching for and playing back moving objects detected by a motion sensor English 23

Alarm search All alarm recording images in the alarm recording area can be searched for and played back. If pre-alarm images have is recorded, the images immediately before the alarms can also be played back. Press the SEARCH FRAME/FIELD button during recording or when the digital video recorder is stopped. The SEARCH screen appears. Use the jog dial to select ALARM SEARCH and then turn the shuttle dial clockwise. The ALARM SEARCH screen appears. 1 NO: Alarm number appears. 2 DATE/TIME: The date and time that the alarm was received and the images were recorded appears. 3 TOTAL ALARM: The total number of alarm images recorded appears. Use the jog dial to move the cursor in order to select the images to be played back. The selected alarm image appears in the preview screen. Note: • Up to eight items of alarm information can be displayed on the ALARM SEARCH screen. When the jog dial is turned, the previous or next alarm information screen appears. • To end this search mode, press the SEARCH FRAME/FIELD button. Turn the shuttle dial clockwise. The preview image appears in a single-screen display and playback starts. Note: • You can also use the shuttle dial or jog dial to carry out operations such as pausing and fast-forward playback. • Alarm search starts playback from the image that was recorded at the instant the alarm occurred, so if you are viewing pre-alarm images, use the shuttle operations to carry out rewind playback. Alarm search 2 Press an ALARM skip button during playback. • If you press the û button, playback skips to the previous alarm image. • If you press the ù button, playback skips to the next alarm image. Note: When playing back using alarm search, the playback will pause at the start and at the end of each alarm recording. Use the ALARM skip buttons to play back previous and subsequent alarm recordings. SEARCH FRAME/FIELD 1 ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> MOVE:JOG SELECT:SHUTTLE 2 NO DATE TIME TOTAL ALARMS 008 13-12 11:13 0010 007 13-12 11:15 006 13-12 15:19 005 15-12 10:13 004 16-12 16:13 003 16-12 11:13 002 19-12 14:23 001 20-12 05:37 MOVE:JOG SELECT:SHUTTLE 1 2 3 3 NO DATE TIME TOTAL ALARM 008 13-12 11:13 0234 007 13-12 11:15 006 13-12 15:19 005 15-12 10:13 004 16-12 16:13 003 16-12 11:13 002 19-12 14:23 001 20-12 05:37 MOVE:JOG SELECT:SHUTTLE 4 18-11-01 ALARM 0004 25:03:12 EN 0.12SEC ALARM 1 18-11-01 ALARM 0004 25:03:12 EN 0.12SEC 24 English

Alarm thumbnail search Alarm images can be searched for and played back from thumbnails. All alarm images recorded in the alarm recording area are displayed as thumbnails. Press the SEARCH FRAME/FIELD button during recording or when the digital video recorder is stopped. The SEARCH screen appears. Use the jog dial to select ALARM THUMBNAIL SEARCH and then turn the shuttle dial clockwise. The last nine alarm recording images recorded appear. The alarm number appears with each alarm recording image, and the alarm number of the currently-selected alarm image flashes. Use the jog dial to move the cursor in order to select the images to be played back. The alarm number of the currently-selected alarm image flashes. Note: • Up to nine items of alarm information including thumbnails can be displayed. When the jog dial is turned, the previous or next alarm information screen appears. • To end this search mode, press the SEARCH FRAME/FIELD button. Turn the shuttle dial clockwise. The selected image appears in a single-screen display and playback starts. Note: • You can also use the shuttle dial or jog dial to carry out operations such as pausing and fast-forward playback. • Only the contents of each alarm can be played back, in the same way as for alarm searching. Use the ALARM skip buttons to play back previous and subsequent alarm recordings. SEARCH FRAME/FIELD 1 ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> MOVE:JOG SELECT:SHUTTLE 2 ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> MOVE:JOG SELECT:SHUTTLE SEARCH:EXIT 0109 0108 0107 0106 0105 0104 0103 0102 0101 3 0109 0108 0107 0106 0105 0104 0103 0102 0101 4 18-11-01 ALARM 0003 25:02:00 EN 0.12SEC English 25

Time/date search The recording date and time for images in the normal recording area (normal recording and timer recording images) and in the alarm recording area of the hard disk can be specified and the images can be played back. Press the SEARCH FRAME/FIELD button during recording or when the digital video recorder is stopped. The SEARCH screen appears. Use the jog dial to select TIME/DATE SEARCH and then turn the shuttle dial clockwise. The TIME/DATE SEARCH screen appears. 1 RECORDING TOP: The date and time of the first recorded image is displayed. 2 RECORDING END: The date and time of the latest (most recently) recorded image is displayed. 3 SEARCH: Enter the date and time to be displayed in this area. 4 PREVIEW: A preview image appears. 5 VIEW: The selected image appears on the monitor as a single-screen image. Example: To search for 8 pm on 26 October 2001 1 Turn the jog dial clockwise, and then use the jog dial to change “25” to “26”. 2 Turn the shuttle dial clockwise and select “10”. 3 Turn the shuttle dial clockwise and select “01”. 4 Turn the shuttle dial clockwise, and then use the jog dial to change “08” to “20”. 5 Turn the shuttle dial clockwise and select “00”. Then turn the shuttle dial. The cursor moves to PREVIEW. SEARCH FRAME/FIELD 1 ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> MOVE:JOG SELECT:SHUTTLE 2 ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> MOVE:JOG SELECT:SHUTTLE RECORDING TOP : 25-10-01 08:00 RECORDING END : 28-10-01 17:00 SEARCH : DATE TIME 25-10-01 08:00 PREVIEW -> VIEW -> CHANGE:JOG SET:SHUTTLE 1 2 3 4 5 3 RECORDING TOP : 25-10-01 08:00 RECORDING END : 28-10-01 17:00 SEARCH : DATE TIME 26-10-01 20:00 PREVIEW -> VIEW -> CHANGE:JOG SET:SHUTTLE 26 English

Turn the shuttle dial clockwise. A search display appears while searching is in progress, and then a preview screen showing the date and time entered appears. Note: If there are no images that match the time exactly, the image closest to the selected time range is displayed. 5 Use the jog dial to select VIEW, and then turn the shuttle dial clockwise. The preview image is displayed and played back in a single-screen. Note: • A single-screen image can be displayed when date and time are entered and VIEW is selected, even without displaying a preview. • You can also use the shuttle dial or jog dial to carry out operations such as pausing and fast-forward playback. 4 RECORDING TOP : 15-12-00 08:00 RECORDING END : 22-12-00 17:00 SEARCH : DATE TIME 17-11-01 02:36:10 PREVIEW -> VIEW -> CHANGE:JOG SET:SHUTTLE 17-11-01 02:36:10 EN 0.12SEC English 27

Archive area search You can play back images that have been saved (copied) in the archive area. Press the SEARCH FRAME/FIELD button during recording or when the digital video recorder is stopped. The SEARCH screen appears. Use the jog dial to select ARCHIVE AREA SEARCH and then turn the shuttle dial clockwise. The ARCHIVE AREA SEARCH screen appears. 1 NO: The archive number is displayed. 2 DATE: The date of the recorded image is displayed. 3 TIME: The start time of the recorded image is displayed. 4 TOTAL: The total capacity of the archive area is displayed. 5 USED: The recorded part of the archive area is displayed. Use the jog dial to move the cursor in order to select the images to be played back. The selected alarm image appears in the preview screen. Note: • Up to eight items of information can be displayed in the ARCHIVE AREA SEARCH screen. When the jog dial is turned, the previous or next archive screen appears. • To end this search mode, press the SEARCH FRAME/FIELD button. Turn the shuttle dial clockwise. The selected image appears in a single-screen display and playback starts. Note: • A single-screen image can be displayed when the cursor is moved to the image to be played back and the shuttle dial is turned clockwise, even without displaying a preview. • You can also use the shuttle dial or jog dial to carry out operations such as pausing and fast-forward playback. SEARCH FRAME/FIELD 1 ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> MOVE:JOG SELECT:SHUTTLE 2 ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> MOVE:JOG SELECT:SHUTTLE SEARCH:EXIT NO DATE TIME CAPACITY 0108 13-12 11:13 TOTAL - 1024MB 0107 13-12 11:15 USED - 400MB 0106 13-12 15:19 0105 15-12 10:13 0104 16-12 16:13 0103 16-12 11:13 0102 19-12 14:23 0101 20-12 05:37 MOVE:JOG SELECT:SHUTTLE 1 2 3 45 3 NO DATE TIME CAPACITY 0108 13-12 11:13 TOTAL - 1024MB 0107 13-12 11:15 USED - 400MB 0106 13-12 15:19 0105 15-12 10:13 0104 16-12 16:13 0103 16-12 11:13 0102 19-12 14:23 0101 20-12 05:37 MOVE:JOG SELECT:SHUTTLE 4 18-11-01 ALARM 0004 25:03:12 EN 0.12SEC 28 English

Motion detection search When a motion sensor is set for images recorded in the normal recording area (normal recording and timer recording images) or for images recorded in the alarm recording area of the hard disk, you can search for images that have changed because of the entry of a suspicious person, for instance, and play back only those images. Note: • If carrying out motion detection searches of multiplexer images, change the setting for MULTIPLEXER in the VIDEO INPUT SET menu to something other than “NO USE”. • If the digital video recorder is connected to a Sanyo multiplexer that allows decoding of channel information (camera numbers), channels can be specified so that only images from those channels are searched for. If any other type of multiplexer is connected, this setting is not possible. Press the SEARCH FRAME/FIELD button during recording or when the digital video recorder is stopped. The SEARCH screen appears. Use the jog dial to select MOTION DETECTION SEARCH and then turn the shuttle dial clockwise. The MOTION DETECTION SEARCH screen appears. Use the jog dial to select SEARCH FROM and then turn the shuttle dial clockwise. The ALARM display flashes. Use the jog dial to select the recording area (example: NORMAL), and then turn the shuttle dial clockwise. The cursor moves to CHANNEL. Note: If the setting for MULTIPLEXER in the VIDEO INPUT SET menu is set to “NO USE”, the cursor will move to START PREVIEW. Examples of recording area selection: • ALARM: Only images in the alarm recording area are searched. • NORMAL: Only images in the normal recording area are searched. • ALARM & NORMAL: Images in both the alarm recording area and the normal recording area are searched. Turn the shuttle dial clockwise, use the jog dial to select the camera number (example: 4), and then turn the shuttle dial clockwise. The cursor moves to START PREVIEW. SEARCH FRAME/FIELD 1 ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> MOVE:JOG SELECT:SHUTTLE 2 ALARM SEARCH -> ALARM THUMBNAIL SEARCH -> TIME/DATE SEARCH -> ARCHIVE AREA SEARCH -> MOTION DETECTION SEARCH -> 3 SEARCH FROM : ALARM START : -------- --:-- END : -------- --:-- CHANNEL : -- START PREVIEW -> MOVE:JOG SELECT:SHUTTLE 4 SEARCH FROM : NORMAL START : 28-10-01 08:00 END : 28-10-01 20:00 CHANNEL : -- START PREVIEW -> MOVE:JOG SELECT:SHUTTLE 5 SEARCH FROM : NORMAL START : 28-10-01 08:00 END : 28-10-01 20:00 CHANNEL : 4 START PREVIEW -> MOVE:JOG SELECT:SHUTTLE English 29

Turn the shuttle dial clockwise. The screen changes and the preview screen for camera number 4 appears. 1 START: The date and time for the first image in the selected recording area appears. You can also select the screen which has a motion sensor set. 2 END: The date and time for the last image in the selected recording area appears. One hour is added to the time that is displayed. You can also select the screen which has a motion sensor set. 3 MOTION SENSOR: The motion sensor appears. 4 PREVIEW: The selected start point appears. If you turn the shuttle dial clockwise, you can check the images up until the end point. 5 VIEW: The selected image appears on the monitor as a single-screen image in a normal screen. Turn the shuttle dial clockwise. Use the jog dial to set the START date and time (example: 10.00 am on the current day) for the motion sensor setting, and then turn the shuttle dial clockwise. The image for the specified time appears in the preview screen, and the cursor moves to the END date and time setting location. Turn the shuttle dial clockwise. Use the jog dial to set the END date and time (example: 8.00 pm on the current day) for the motion sensor setting, and then turn the shuttle dial clockwise. The cursor moves to MOTION SENSOR. Turn the shuttle dial clockwise. The motion sensor setting screen appears. Set the motion sensor to cover the area where you would like movement to be observed. Move the cursor to EXIT and turn the shuttle dial clockwise. The display returns to the MOTION DETECTION SEARCH screen. Refer to page 56 for details on motion sensor settings. 6 SEARCH FROM : NORMAL START : 28-10-01 08:00 END : 28-10-01 20:00 CHANNEL : 4 START PREVIEW -> SEARCHING MOVE:JOG SELECT:SHUTTLE SEARCH FROM : NORMAL / CHANNEL : 4 START : 28-10-01 08:00 END : 28-10-01 10:00 MOTION SENSOR -> PREVIEW -> VIEW -> MOVE:JOG SELECT:SHUTTLE 1 2 3 4 5 7 SEARCH FROM : NORMAL / CHANNEL : 4 START : 28-10-01 08:00 END : 28-10-01 20:00 MOTION SENSOR -> PREVIEW -> VIEW -> MOVE:JOG SELECT:SHUTTLE SEARCH FROM : NORMAL / CHANNEL : 4 START : 28-10-01 10:00 END : 28-10-01 20:00 MOTION SENSOR -> PREVIEW -> VIEW -> MOVE:JOG SELECT:SHUTTLE 8 SEARCH FROM : NORMAL / CHANNEL : 4 START : 28-10-01 10:00 END : 28-10-01 20:00 MOTION SENSOR -> PREVIEW -> VIEW -> MOVE:JOG SELECT:SHUTTLE 9 - - - - - - - - - - - - - - - - - - - - - - - ú ú ú - - - - - - - ú ú ú - - - - - - - ú ú ú - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - LEVEL : 6 EXIT 30 English

Use the jog dial to move the cursor to PREVIEW, and then turn the shuttle dial clockwise. The screen showing the motion sensor settings appear in the preview screen each time the shuttle dial is turned. Note: If no motion sensor settings have been made, “NOT FOUND” appears, so make sure that the motion sensor settings have been made correctly. To view a motion sensor setting in a single-screen display, use the jog dial to move the cursor to VIEW and then turn the shuttle dial clockwise. The display changes from the specified image to normal playback. Note: When using a multiplexer and the camera number has been specified as a channel when carrying out motion detector searches, only images for the specified camera number will be played back. For playback of all cameras the playback has first to be switched off and then switched on again. Furthermore, the multiplexer title information and date information may not be fully displayed at this time in some cases. 10 1 2 SEARCH FROM : NORMAL / CHANNEL : 4 START : 28-10-01 10:00 END : 28-10-01 20:00 MOTION SENSOR -> PREVIEW -> VIEW -> MOVE:JOG SELECT:SHUTTLE 11 1 2 English 31

Important images that have been recorded onto the normal recording area or alarm recording area can be copied to a CompactFlash card or to the archive area of the hard disk. Note: • Copied images are stored as a single picture. • If you are downloading images to a CompactFlash card, the images are automatically saved in the archive area, and they are then copied from the archive area to the CompactFlash card. • If the archive area has become full, use the AREA FULL RESET setting for the archive area in the RECORDING AREA SET menu to delete unneeded images. Copying images to the hard disk archive area Play back the images in the normal recording area or alarm recording area that is to be copied, and pause playback at the image that is to be copied. (See page 21.) Example: To copy 10 seconds of images starting from a selected image While the image to be copied is displayed as a still image, press the COPY button. The copy screen appears. Use the jog dial to select COPY TO and then turn the shuttle dial clockwise. The ARCHIVE AREA display flashes. Important recorded images can be selected for copying. Hard disk CF card or microdrive Images can be copied to the archive area of the hard disk. Images can be copied to a CompactFlash card or to a microdrive. STILL 1 PLAY/STOP COPY 2 COPY TO : ARCHIVE AREA HOW MANY : 1 PICTURES START -> CHANGE WITH JOG. SET WITH SHUTTLE 3 COPY TO : ARCHIVE AREA HOW MANY : 1 PICTURES START -> CHANGE WITH JOG. SET WITH SHUTTLE 32 English

4 Use the jog dial to select ARCHIVE AREA and then turn the shuttle dial clockwise. The cursor moves to HOW MANY. 5 Turn the shuttle dial clockwise, use the jog dial to change the setting to “10”, and then turn the shuttle dial clockwise. The cursor moves to PICTURES. 6 Use the jog dial to select the SECONDS setting, and then turn the shuttle dial clockwise. • PICTURES: Specify the number of images to be copied. • SECONDES: Specify the number of seconds of images to be copied. • MINUTES: Specify the number of minutes of images to be copied (up to 60 minutes). The cursor moves to START. 7 Turn the shuttle dial clockwise. Copying of images to the archive area starts. When copying is complete, “COPY FINISHED” appears. Note: If you press the COPY button while copying is in progress, copying is canceled. Copying images from archive area to a CompactFlash card 1 Insert a CompactFlash card into the CompactFlash slot on the front panel. When inserting the CompactFlash card, make sure that the direction of insertion is correct. A microdrive can also be used for copying images. Display an image from the archive area as a still image, and then press the COPY button. The copying screen appears. Refer to page 28 for details on playing back images from the archive area. Use the jog dial to select COPY TO and then turn the shuttle dial clockwise. The ARCHIVE AREA display flashes. COPY TO : ARCHIVE AREA HOW MANY : 1 PICTURES COPY TO : ARCHIVE AREA HOW MANY : 10 PICTURES COPY TO : ARCHIVE AREA HOW MANY : 10 PICTURES START -> 1 2 3 2 1 3 (Inserting) (Removing) COPY 2 COPY TO : ARCHIVE AREA HOW MANY : 1 PICTURES START -> CHANGE WITH JOG. SET WITH SHUTTLE 3 COPY TO : ARCHIVE AREA HOW MANY : 1 PICTURES START -> CHANGE WITH JOG. SET WITH SHUTTLE English 33

4 Use the jog dial to select COMPACIT FLASH and then turn the shuttle dial clockwise. The cursor moves to HOW MANY. 5 Turn the shuttle dial clockwise, use the jog dial to change the setting to “10”, and then turn the shuttle dial clockwise. The cursor moves to PICTURES. 6 Use the jog dial to select the SECONDS setting, and then turn the shuttle dial clockwise. • PICTURES: Specify the number of images to be copied. • SECONDES: Specify the number of seconds of images to be copied. • MINUTES: Specify the number of minutes of images to be copied (up to 60 minutes). Note: • The limit to the number of images that can be copied to CompactFlash is 1000. Copying ends when 1000 images have been copied. • When copying alarm recordings, they can only be copied one at a time. 7 Turn the shuttle dial clockwise. The COPY indicator illuminates, the COPY TO : COMPACT FLASH screen appears and copying of images to the CompactFlash card starts. When copying is complete, “COPYING COMPLETE” appears. Note: • If copying images directly from the normal recording area or alarm recording area to a CompactFlash card, the same images will also be copied to the archive area. • If you press the COPY button while copying is in progress, copying is canceled. COPY TO : COMPACT FLASH HOW MANY : 1 PICTURES COPY TO : COMPACT FLASH HOW MANY : 10 PICTURES COPY TO : COMPACT FLASH HOW MANY : 10 SECONDES COPY TO : COMPACT FLASH HOW MANY : 10 SECONDES START -> CompactFlash recording area 1 A SANYO folder is created in the root directory. 2 Sub-folders for holding the copied images are created in sequence in the SANYO folder. 3 The images are copied as JPEG files into the sub-folders, with filenames starting from 00000001.JPG. HTML files called INDEX.HTM containing the number of files that have been copied to a folder are also copied to each folder at this time. 4 To view the file listing using a computer, use a browser such as Internet Explorer 5.0 or later to open the INDEX.HTM files. The JPEG files can be played back as a slideshow. Note: • When frame recording images are copied to a CompactFlash card, the images are copied separately as two field images, so that frame playback is not possible when viewing these images using a computer. • Images that have been copied onto a CompactFlash card contain codes for detecting file tampering, and these codes can be recognized by computer software applications that can detect file tampering. Contact the place of purchase for details. • JPG images are recorded as field images, so that when they are viewed using the normal image viewer, they are compressed by 1/2 in the vertical direction. Make sure that you view them using the index.htm file. COMPACT FLASH SANYO 00000001 00000001.JPG 00000002.JPG INDEX.HTM 00000001.JPG 00000002.JPG 00000003.JPG 00000004.JPG INDEX.HTM 00000002 1 2 3 4 2 3 4 34 English

Copying to a DDS (DAT) drive 1 Insert an SCSI card (sold separately) for connecting the DDS (DAT) drive into the PC card slot at the rear of the digital video recorder. Images from the archive area can be copied to the DDS (DAT) drive, and images recorded on the DDS (DAT) drive can also be copied to the archive area. Note: • Check that the direction of insertion is correct wehn inserting the SCSI card. • If an SCSI card or DDS (DAT) drive other than the ones recommended is used, correct operation cannot be guaranteed. • DDS (Digital Data Strage)/DAT (Digital Audio Tape). Backing up All of the data in the archive area can be backed up on a DDS (DAT) drive. Press the COPY button during recording or when the digital video recorder is stopped. The ARCHIVE SET screen appears. Use the jog dial to select BACK UP and then turn the shuttle dial clockwise. “ARCHIVING TO DDS(DAT) !” appears, and copying then starts. • If you press the COPY button while copying is in progress, copying is canceled. • When copying is completed, “ARCHIVE FINISHED!” appears. Press any button to return to the normal screen. Note: • When data is converted for storage on a DDS (DAT) drive, the conversion process may result in an increase in the size of the data. If copying images onto a 12 GB tape, it may only be possible to copy about 10 GB of data. • It will take approximately 4 hours to copy 10 GB of data onto a DDS (DAT) drive. 1 1 2 3 2 3 (Installed) (Removed) You can slide the knob to lock the card. Return the knob after unlocking. • Recommended SCSI card Manufacturer: ADAPTEC Model No.: Slim SCSI 1460 • Recommended DDS-3 type DDS (DAT) drive Manufacturer: Hewlett Packard Model No.: Super Store dat 24e Be sure to attach the accessory ferrite core to the SCSI card connection cable. COPY 2 BACK UP -> RESTORE -> ERASE -> 3 01-01-01 00:00:00 EN 0.12SEC ARCHIVING TO DDS(DAT) ! English 35

Reading data from a DDS (DAT) drive into the archive area Note: All of the previously recorded images in the archive area are deleted when images are transferred in this way. Press the COPY button during recording or when the digital video recorder is stopped. The ARCHIVE SET screen appears. Use the jog dial to select RESTORE and then turn the shuttle dial clockwise. The message “LISTING DATA !” appears. When playback is complete, the RESTORE FROM DDS (DAT) screen appears. Use the jog dial to select the data to be read into the archive area, and then turn the shuttle dial clockwise. Reading of data starts. The RESTORE FROM DDS (DAT) screen appears. The image data on the DDS (DAT) drive is then saved into the archive area. When all data has been read into the archive area, “RESTORE FINISHED!” appears. When you play back the images in the archive area, the image data that has been read can be played back. COPY 1 BACK UP -> RESTORE -> ERASE -> 2 01-01-01 08:00:00 EN 0.12SEC LISTING DATA ! 3 NO DATE TIME SIZE 0001 13-12-2001 11:13 3.0GB 0002 15-12-2001 10:15 2.0GB 0003 17-12-2001 10:15 2.0GB STORED DATA ON HDD WILL BE ERASED ! 01-01-01 08:00:00 EN 0.12SEC RESTORING FROM DDS(DAT) ! 36 English

Deleting DDS (DAT) drive image data Press the COPY button during recording or when the digital video recorder is stopped. The ARCHIVE SET screen appears. Use the jog dial to select ERASE and then turn the shuttle dial clockwise. The WARNING screen appears. Use the jog dial to change “NO” to “YES”, and then turn the shuttle dial clockwise. “ERASING MEDIUM!” appears, and when erasing of data from the tape has been completed, “ERASING FINISHED!” appears. COPY 1 BACK UP -> RESTORE -> ERASE -> 2 STORED DATA ON DDS(DAT) WILL BE ERASED ! ARE YOU SURE ? NO CHANGE WITH JOG, SET WITH SHUTTLE 3 01-01-01 08:00:00 EN 0.12SEC ERASING MEDIUM ! English 37

OPERATIONS Menu flow

1.LANGUAGE/CLOCK SET -> 2.VIDEO INPUT SET -> 3.RECORDING AREA SET -> 4.RECORDING CONDITIONS SET -> 5.NORMAL REC MODE SET -> 6.TIMER SET -> 7.HOLIDAY SET -> 8.ALARM REC MODE SET -> TO MAIN MENU 2 -> MOVE LINES WITH JOG. SELECT WITH SHUTTLE ENGLISH 01-01-2001 MON 00:00:00 MODE : USE WEEK MONTH TIME ON LST-SUN 03 02:00 OFF LST-SUN 10 02:00 ADJUST.TIME 01:00

Basic menu screen operations 1 Press the MENU button. The MAIN MENU 1 screen appears. If you press the MENU button once more, the MAIN MENU 2 screen appears. Note: If you repeatedly press the MENU button, the screen toggles between MAIN MENU 1 and MAIN MENU 2. Furthermore, you can also select “TO MAIN MENU 2” or “TO MAIN MENU 1” in the respective menu screens to display the other menu screen. 2 Turn the jog dial to the left or right to move the cursor to the menu items. The selected item is highlighted. 3 Turn the shuttle dial clockwise. The sub-menu appears. 4 Press the EXIT/OSD button. The display returns to the normal screen. Operations while a sub-menu screen is displayed If you press the MENU button while a sub-menu screen is displayed, you can check the settings in the sub-menu screens. Note: You can display menus even while images are being recorded in one of the recording areas. In such cases, the recording symbol appears on the screen. The menus can only be displayed at this time; the settings cannot be changed. MENU

1.LANGUAGE/CLOCK SET -> 2.VIDEO INPUT SET -> 3.RECORDING AREA SET -> 4.RECORDING CONDITIONS SET -> 5.NORMAL REC MODE SET -> 6.TIMER SET -> 7.HOLIDAY SET -> 8.ALARM REC MODE SET -> TO MAIN MENU 2 -> MOVE LINES WITH JOG. SELECT WITH SHUTTLE

1.DISPLAY SET/VIDEO LOSS SET -> 2.RS-232C/RS-485 SET -> 3.BUZZER SET -> 4.SECURITY LOCK SET -> 5.NETWORK SET -> 6.HDD SET -> 7.POWER FAILURE/USED TIME -> TO MAIN MENU 1 -> MOVE LINES WITH JOG. SELECT WITH SHUTTLE MENU

1.LANGUAGE/CLOCK SET -> 2.VIDEO INPUT SET -> 3.RECORDING AREA SET -> 4.RECORDING CONDITIONS SET -> 5.NORMAL REC MODE SET -> 6.TIMER SET -> 7.HOLIDAY SET -> 8.ALARM REC MODE SET -> TO MAIN MENU 2 -> MOVE LINES WITH JOG. SELECT WITH SHUTTLE