Sanyo PLC-XL40 Owner's Manual

◆Large Screen in Limited Space Short focus lens allows you to project large images from short distance (p.14). ◆Antitheft Alarm Function This projector is equipped with an Antitheft alarm function which sounds when a vibration is detected. (pp.50 – 52). ◆Security Features The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control or remote control (p.47). PIN code lock functions prevents unauthorized use of the projector (pp.47–48). ◆Logo Function The Logo function allows you to customize the screen logo. The Logo page identifies the owner of the projector (pp.43, 44). ◆Compact Design This projector is designed to be compact in size and weight. It is easy to carry and work anywhere you want to use. ◆Simple Computer System Setting The projector has a Multi-scan system to conform to almost all computer output signals quickly (p.27). ◆Compatibility The projector widely accepts various video and computer input signals including; Computers, 6 Color systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M, or PAL-N), Component video, S-Video and RGB scart. ◆Quick Termination The AC power cord can be unplugged immediately after turning off the projector without waiting for the projector to cool down (p.20). ◆Digital Zoom (for Computer) The digital zoom function allows you to focus on crucial information during a presentation. You can expand the images approx. 16 times the screen size and compress them to approximately a quarter of the screen size (p.34). ◆Blackboard Function A blackboard can be used as a projection screen. (pp.31, 38) *The board color is limited to Green. ◆Multilanguage Menu Display The Operation menu is available in 16 languages: English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese (p.42). ◆Switchable Interface Terminal The projector provides a switchable interface terminal. You can use the terminal as computer input or monitor output conveniently (p.45). ◆Power Management The Power management function reduces power consumption and maintains lamp life (p.45). This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ✔Notes: •The On-Screen Menu and figures in this manual may differ slightly from the product. •The contents of this manual are subject to change without notice.

Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . . . . .2 Table of Contents . . . . . . . . . . . . . . . . . . . . . .3 To the Owner . . . . . . . . . . . . . . . . . . . . . . . . .4 Safety Instructions . . . . . . . . . . . . . . . . . . . .5 Air Circulation 6 Installing the Projector in Proper Position 6 Moving the Projector 6 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . .7 Part Names and Functions . . . . . . . . . . . . . .8 Front 8 Back 8 Bottom 8 Rear Terminal 9 Top Control 10 Antitheft Alarm Setting Buttons 11 Remote Control 12 Remote Control Battery Installation 13 Operating Range 13 Installation . . . . . . . . . . . . . . . . . . . . . . . . . .14 Positioning the Projector 14 Adjustable Feet 14 Connecting the AC Power Cord 15 Connecting to a Computer 16 Connecting to Video Equipment 17 Connecting to Component Video Equipment 18 Basic Operation . . . . . . . . . . . . . . . . . . . . . .19 Turning On the Projector 19 Turning Off the Projector 20 How to Operate the On-Screen Menu 21 Menu Bar 22 Focus Adjustment 23 Keystone Correction 23 Sound Adjustment 24 Remote Control Operation 24 Computer Input . . . . . . . . . . . . . . . . . . . . .26 Input Source Selection 26 Computer System Selection 27 Auto PC Adjustment 28 Manual PC Adjustment 29 Image Level Selection 31 Image Level Adjustment 32 Screen Size Adjustment 33 Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .35 Input Source Selection (Video, S-Video) 35 Input Source Selection (Component, RGB Scart 21-pin) 36 Video System Selection 37 Image Level Selection 38 Image Level Adjustment 39 Screen Size Adjustment 41 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Setting 42 Antitheft Alarm function . . . . . . . . . . . . . . .50 How to Use the Antitheft Alarm Function 50 Maintenance and Cleaning . . . . . . . . . . . . .53 Warning Indicator 53 Cleaning the Air Filters 54 Attaching the Lens Cover 54 Cleaning the Projection Lens 55 Cleaning the Projector Cabinet 55 Lamp Replacement 56 Lamp Replacement Counter 57 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Troubleshooting 58 Menu Tree 60 Indicators and Projector Condition 62 Compatible Computer Specifications 63 Technical Specifications 64 Optional Parts 65 Configurations of Terminals 66 PIN Code Label 67

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in good condition for many years to come. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections, and try the solutions in the “Troubleshooting” section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. Safety Precaution WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. – This projector produces intense light from the projection lens. Avoid staring directly into the lens as much as possible, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam. – Install the projector in a proper position. Otherwise it may result in fire hazard. – Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimensions shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained. – Do not cover the ventilation slot on the projector. Heat build- up can reduce the service life of your projector, and can also be dangerous. – If the projector is unused for an extended time, unplug the projector from the power outlet. 0.7' (20 cm) 1.5' (50 cm) 3' (1 m) 1.5' (50 cm) SIDE and TOP REAR NOTE: This symbol and recycle system are applied only to EU countries and not applied to the countries in the other area of the world. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of- life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in! CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment. READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE. CAUTION ON HANGING FROM THE CEILING When hanging the projector from the ceiling, clean the air intake vents, air filters, and the top of the projector periodically with a vacuum cleaner. If you leave the projector unclean for a long time, the cooling fans can be clogged with dust, and it may cause a breakdown or a disaster. DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR DISASTER. IF THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED.

the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges. Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc... Do not use attachments not recommended by the manufacturer as they may cause hazards. Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating. The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register. This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided. Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector. Do not install the projector near the ventilation duct of air- conditioning equipment. This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it. Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b.If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d.If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation. e.If the projector has been dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition. Voor de klanten in Nederland Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA. NL

When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case. Care must be taken when handling the projector; do not drop, bump, subject it to strong forces, or put other things on the cabinet. Do not tilt the projector more than 20 degrees from side to side. Do not point the projector up to project an image. Do not point the projector down to project an image. Do not put the projector on either side to project an image. Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard. Installing the Projector in Proper Position Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. Air Circulation 20˚ 20˚ Air Intake Vent Exhaust Vent (Hot air exhaust) Exhaust Vent (Hot air exhaust) Air Intake Vent CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. – Do not put any flammable objects or spray can near the projector. Hot air is exhausted from the air vents. – Keep the exhaust vent at least 3’ (1 m) away from any objects. – Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used. – Do not put anything on the projector. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat. Cooling fans are provided to cool down the projector. The fan’s running speed is changed according to the temperature inside the projector. CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR – Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case. – Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer. – Do not put the projector in a case before it is cooled enough.

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted. WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET. The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow ············ Earth Blue ································· Neutral Brown ······························ Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. WARNING: THIS APPARATUS MUST BE EARTHED. ASA The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician. GROUND THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE. AC Power Cord Requirement Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number(s) : PLC-XL40 Trade Name : Sanyo Responsible party : SANYO FISHER COMPANY Address : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818)998-7322

w Focus Lever e Projection Lens r Lens Cover (See page 54 for attaching.) t u !6 !2 !4 !0 !1 CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. e y r t Front Part Names and Functions o i !5 CAUTION Do not turn on the projector with putting the lens cover on. The light beam may damage lens cover and result in fire hazard. Attach the lens cover while the projector is not in use to avoid scratching the lens surface. y Infrared Remote Receiver u Top controls and Indicators i Speaker o Air Intake Vent !0 Power Cord Connector !1 Terminals and Connectors !2 Lamp Cover !3 Air Intake Vents !4 Air Filters !5 Battery Compartment (For Antitheft alarm function) !6 Adjustable Feet w q t Exhaust Vents !3 ✽ ✽Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brands Corporation.

✽RESET button A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. Press the RESET button with a pen, then the projector shuts down and restarts. Do not use the RESET function excessively. Rear Terminal S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTER / COMPONENT AUDIO IN R VIDEO IN L (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 / COMPONENT IN USB SERVICE PORT RESET q w e r t y i u t S-VIDEO IN Connect the S-VIDEO output from video equipment to this jack (p.17). y AUDIO IN Connect the audio output from video equipment connected to t or o to this jack. [When the audio output is monaural, connect it to L (MONO) jack (p.17)]. i COMPUTER/COMPONENT AUDIO IN Connect the audio output (stereo) from a computer or video equipment connected to e or r to this jack (pp.16, 18). o VIDEO IN Connect the composite video output from video equipment to VIDEO jack (p.17). r COMPUTER IN 2/MONITOR OUT This terminal is switchable and can be used for input from a computer or output to the other monitor. Set the terminal up as either Computer input or Monitor output properly. [Used for Monitor out, this terminal outputs only incoming signal from COMPUTER IN 1/COMPONENT IN terminal (pp. 16, 45)]. u AUDIO OUT(VARIABLE) Connect an external audio amplifier to this jack (pp.16 – 18). This terminal outputs sound from AUDIO IN terminal (y or i). q USB (Series B) In order to operate the computer with the remote control during a presentation, connect the USB port of the computer to the projector with a USB cable (not supplied) (p.16). w SERVICE PORT This jack is used to service the projector. ✽ e COMPUTER IN 1/COMPONENT IN Connect output signal from a computer, RGB scart 21-pin video output, or component video output to this terminal (pp.16, 18). When the cable is of the longer variety, it is advisable to use this terminal and not COMPUTER IN 2/MONITOR OUT. o

Top Control ON - OFF POWER KEYSTONE INPUT WARNING LAMP REPLACE MENU - VOLUME + VOLUME SELECT q w e t u i o u LAMP REPLACE indicator Turn yellow when the life of the projection lamp draws to an end (pp.56, 62). y WARNING indicator –Lights red light when the projector detects an abnormal condition. –Blinks red when the internal temperature of the projector exceeds the operating range (pp.53, 62). w POWER ON–OFF button Turn the projector on or off (pp.19–20). r POWER indicator –Lights red when the projector is in stand-by mode. –Lights green during operations. –Blinks green in the Power management mode (pp.45, 62). t INPUT button Select input source (pp.26, 35, 36). e MENU button Open or close the On-Screen Menu (p.21). o POINT (ed7 8 ) buttons –Select an item or adjust the value in the On- Screen Menu (p.21). –Pan the image in Digital zoom + mode (p.34). –Adjust the volume level (Point 7 8 buttons) (p.24). q SELECT button –Execute the selected item (p.21). –Expand or compress the image in Digital zoom mode (p.34). i KEYSTONE button Correct the keystone distortion (pp.23, 42). r y

q e w w Button 1–3 Used for the Antitheft alarm setting. e ALARM indicator Blinks red to indicate the battery condition or key operation. q F button Used for the Antitheft alarm setting. Antitheft Alarm Setting Buttons These buttons are used for the Antitheft alarm function (pp.50 – 52).

Remote Control To ensure safe operation, observe the following precautions: – Do not bend, drop, or expose the remote control to moisture or heat. – For cleaning, use a soft dry cloth. Do not apply benzene, thinner, splay, or any other chemicals. t e !0 i !4 r !5 !3 q POWER ON-OFF button Turn the projector on or off (pp.18, 19). w VIDEO button Select VIDEO input source (pp.24, 35). e COMPUTER button Select COMPUTER input source (pp.24, 26, 36). r MENU button Open or close the On-Screen Menu (p.21). i PAGE ed buttons Scroll back and forth pages on the screen when giving a presentation. Connect the projector and your computer with a USB cable (not supplied) to use these buttons (pp.9, 16). !1 u D.ZOOM ed buttons Zoom in and out the images (pp.25, 34). !5 AUTO PC button Automatically adjust the computer image to its optimum setting (pp.25, 28). !4 IMAGE button Select the image level (pp.25, 31, 38). o FREEZE button Freeze the picture (p.24). !2 MUTE button Mute the sound (p.24). !3 P-TIMER button Operate the P-timer function (p.25). !0 NO SHOW button Temporarily turn off the image on the screen (p.25). !6 KEYSTONE button Correct the keystone distortion (pp.23, 42). t Point ed 7 8 (VOLUME + / –) buttons –Select an item or adjust the value in the On-Screen Menu. (p.21) –Pan the image in Digital zoom + mode (p.34). –Adjust the volume level (Point 7 8 buttons) (p.24). y SELECT button –Execute the selected item (p.21). –Expand or compress the image in Digital zoom mode. (p.34). q w y u o !6 !2 !1 LAMP CONTROL button Select the lamp mode (pp.25, 46).

1 2 3 To insure safe operation, please observe the following precautions: ●Use two (2) AA or LR6 type alkaline batteries. ●Always replace batteries in sets. ●Do not use a new battery with a used battery. ●Avoid contact with water or liquid matter. ●Do not expose the remote control to moisture or heat. ●Do not drop the remote control. ●If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries. ●Risk of explosion if a battery is replaced by an incorrect type. ●Dispose of used batteries according to the instructions. Open the battery compartment lid. Install new batteries into the compartment. Replace the compartment lid. Two AA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. Point the remote control toward the projector (Infrared Remote Receiver) when pressing any button. Maximum operating range for the remote control is about 16.4’ (5 m) and 60 degrees in front of the projector. Operating Range 30° 30° Remote Control Battery Installation 16.4’ (5 m)

•The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient lighting in order to get the best image. •All measurements are approximate and may vary from the actual sizes. 65” 70” 75” 80” 60” A B 3.38’ (1.03 m) 3.15’ (0.96 m) 2.92’ (0.89 m) 2.72’ (0.83 m) A : B = 10 : 1.2 Screen Size (W x H) mm 4:3 aspect ratio Throw distance 60” 1219 x 914 2.49’ (0.76 m) 65” 1321 x 991 2.72’ (0.83 m) 70” 1422 x 1067 2.92’ (0.89 m) 75” 1524 x 1143 3.15’ (0.96 m) 80” 1626 x 1219 3.38’ (1.03 m) (Inch Diagonal) 2.49’ (0.76 m) For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (Center) Projection angle can be adjusted up to 10.0 degrees with the adjustable feet. Lift the front of the projector and pull the feet lock latches on both sides of the projector upward. 1 Adjustable Feet Feet Lock Latches Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 2 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be corrected by menu operation (pp.23, 42). 3 Adjustable Feet Positioning the Projector Installation

AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer. To power cord connector on your projector. Projector side AC outlet side Ground To the AC outlet. (120 V AC) For Continental Europe For the U.S.A. and Canada This projector uses nominal input voltages of 100–120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning it on. CAUTION For safety, unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet with the AC power cord, it is in stand-by mode and consumes a little electric power. Connecting the AC Power Cord Connect the AC power cord (supplied) to the projector. The AC outlet must be near this equipment and must be easily accessible. For the U.K. To the AC outlet. (200–240 V AC) To the AC outlet. (200–240 V AC) Installation

ON ON S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTER / COMPONENT AUDIO IN R VIDEO IN L (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 / COMPONENT IN USB SERVICE PORT RESET Cables used for connection • VGA Cables (Mini D-sub 15 pin)* • USB Cable • Audio Cables (Mini Plug: stereo) (*One cable is supplied; other cables are not supplied with the projector.) External Audio Equipment VGA cable USB cable Audio cable (stereo) Audio cable (stereo) Monitor Output or Monitor Input USB port Audio Output USB COMPUTER/ COMPONENT AUDIO IN AUDIO OUT (stereo) Audio Input COMPUTER IN 2/ MONITOR OUT Unplug the power cords of both the projector and external equipment from the AC outlet before connecting the cables. ✔Notes: •Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the COMPUTER IN 1/COMPONENT IN and the COMPUTER IN 2/MONITOR OUT terminal as input. •When connecting the AUDIO OUT to external audio equipment, the projector’s built-in speaker is disconnected. •When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1/COMPONENT IN and not the COMPUTER IN 2 /MONITOR OUT. •See page 65 for ordering optional cables. Monitor Output COMPUTER IN 1/ COMPONENT IN VGA cable This terminal is switchable. Set up the terminal as either Computer input or Monitor output (see page 45).

COMPUTER / COMPONENT AUDIO IN R VIDEO IN L (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 / COMPONENT IN USB SERVICE PORT RESET Installation Connecting to Video Equipment Cables used for connection • Video and Audio Cable (RCA x 3) • S-VIDEO Cable • Audio Cable (Mini Plug: stereo) (Cables are not supplied with the projector.) ✔Notes: •When connecting AUDIO OUT to external audio equipment, the projector’s built-in speaker is disconnected. •The S-VIDEO jack connection overrides the VIDEO jack connection when selecting AUTO in the Input Menu (p.35). •See page 65 for ordering optional cables. External Audio Equipment Audio cable (stereo) VIDEO S-VIDEO S-Video cable Video and audio cable Composite Video and Audio Output S-Video Output AUDIO IN Audio Input AUDIO OUT (stereo) (R) (L) (R) (L) (Video) (Video) Unplug the power cords of both the projector and external equipment from the AC outlet before connecting the cables.

S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTER / COMPONENT AUDIO IN R VIDEO IN L (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 / COMPONENT IN USB SERVICE PORT RESET Cables used for connection • Audio Cables (Mini Plug: stereo) • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cables are not supplied with the projector.) ✔Notes: •When connecting AUDIO OUT to external audio equipment, the projector’s built-in speaker is disconnected. •See page 65 for ordering optional cables. External Audio Equipment COMPUTER IN 1/COMPONENT IN COMPUTER/ COMPONENT AUDIO IN Audio cable (stereo) Audio cable (stereo) Audio Input Component Video Output (Y, Pb/Cb, Pr/Cr) RGB Scart 21- pin Output Audio Output Scart-VGA cable Component-VGA cable AUDIO OUT (stereo) Component cable Unplug the power cords of both the projector and external equipment from the AC outlet before connecting the cables.

outlet. The POWER indicator turns red. Press the POWER ON-OFF button on the top control or on the remote control. The POWER indicator becomes green and the cooling fans start to operate. The preparation display appears on the screen and the count down starts. 2 3 1 16 The preparation display disappears after 30 seconds. 4 After the countdown, the input source that was selected the last time and the Lamp mode status icon (see page 46) will appear on the screen. If the projector is locked with a PIN code, a PIN code Input Dialog Box appears. Enter the PIN code as instructed below. See page 46 for the Lamp mode. Selected Input Source and Lamp Mode Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. Lamp mode Pointer After the OK icon disappears, you can operate the projector. PIN Code Input Dialog Box Turning On the Projector Basic Operation Enter a PIN code Use the Point 7 8 buttons to select a number and press the SELECT button to fix the number; the number changes to “✳.” If you fixed an incorrect number, move the pointer to “Set” or “Clear” once with the Point d button, then return to “PIN code.” Enter the correct number. Repeat this step to complete entering a four-digit number. “1234” is set as the initial PIN code at the factory. When the four-digit number is fixed, the pointer automatically moves to “Set.” Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, “PIN code” and the number (✳✳✳✳) will turn red and disappear. Enter the PIN code all over again. What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting the PIN code prevents unauthorized use of the projector. A PIN code consists of a four-digit number. Refer to PIN code lock function in the Setting Menu on pages 47–48 for locking operation of the projector with your PIN code. ✔Notes: •When the Logo select function is "Off,” the logo will not be displayed on the screen (p.43). •When the "Countdown off" or "Off" is selected in the Display function, the countdown will not be shown on the screen (p.42). •During the countdown period, all operations are invalid. •If the correct PIN code number is not entered for 3 minutes after the PIN code dialog box appeared, the projector will be turned off automatically. CAUTION ON HANDLING THE PIN CODE If you forget your PIN code, the projector can no longer be started. Take special care in setting a new PIN code; write down the number and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

or on the remote control, and “Power off?” appears on the screen. Press the POWER ON-OFF button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running. (You can select the level of the fans’ quietness and running speed. See page 49.) At this time you can disconnect the AC power cord even if the fans are still running. 1 2 TO MAINTAIN THE LAMP LIFE, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF. 3 When the projector has cooled down enough to be turned on again, the POWER indicator stops blinking. “Power off” disappears after 4 seconds. ✔Notes: •When the On start function is “On,” this projector is turned on automatically by connecting the AC power cord to an AC outlet (p. 46). •Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and let stand for about an hour in every 24 hours. •The running speed of cooling fans is changed according to the temperature inside the projector. •Do not put the projector in a case before the projector is cooled enough. •If the WARNING indicator blinks or emits a red light, see “Warning Indicator” on page 53. Turning Off the Projector

buttons to adjust the value. SELECT button Pointer (red frame) Press the Point ed buttons to move the pointer. Item How to Operate the On-Screen Menu On-Screen Menu Quit Exit this menu. The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. Use the Point 7 8 buttons to select a Menu icon; use the Point ed buttons to select an item. Press the SELECT button to show the item data. To adjust the data, use the Point 7 8 buttons. Refer to the relevant pages for more details about each adjustment. To close the On-Screen Menu, press the MENU button again. Press the MENU button on the top control or on the remote control to display the On-Screen Menu. ✔Note: •The selected item is not active until the SELECT button is pressed. 1 2 3 SELECT button POINT buttons Remote Control MENU button ON - OFF POWER KEYSTONE INPUT WARNING LAMP REPLA MENU - VOLUME + VOLUME SELECT Top Control MENU button SELECT button POINT button

Used to select the computer system (p.27). Image Adjust Menu Used to adjust the computer image from Contrast, Brightness, Color temp., White balance (R/G/B), Sharpness, and Gamma (pp.32–33) Setting Menu Used to set the projector’s operating configurations (pp.42–49). Sound Menu Used to adjust the volume or mute the sound (p.24). Image Select Menu Used to select an image level from Dynamic, Standard, Real, Blackboard (Green), and Image 1–4 (p.31). For computer source AV System Menu Used to select the system of selected video source (p.37). Image Adjust Menu Used to adjust the picture image from Contrast, Brightness, Color, Tint, Color temp., White balance (R/G/B), Sharpness, Gamma, Noise reduction, and Progressive (pp.39–40). For video source Same function as computer menu. Input Menu Used to select input source, Video or Computer (pp.35–36). PC Adjust Menu Used to adjust parameters to match with input signal format (pp.28–30). Image Select Menu Used to select an image level from Dynamic, Standard, Cinema, Blackboard (Green), and Image 1–4 (p.38). Screen Menu Used to set the size of image to Normal, Wide, or Custom (p.41). Guide Window Shows the selected Menu of the On- Screen Menu. Same function as menu for computer source. Input Menu Used to select the input source, Computer or Video (p.26). Screen Menu Used to adjust the size of image from Normal, True, Wide, Full screen, Custom, and Digital zoom +/– (pp.33–34). For detailed functions, see Menu Tree on pages 60–61.

Focus Lever • The arrows are white when there is no correction. • The direction of the arrow which are being corrected turns red. • The arrows disappear at the maximum correction. • If you press the KEYSTONE button on the top control or on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment is canceled. • The adjustable range can be limited depending on the input signal. • The projected picture may fluctuate momently depending on the keystone adjustment. • “Keystone” dissappears after 4 seconds. If a projected picture has keystone distortion, correct the image with the Keystone function. Press the KEYSTONE button on the top control or on the remote control. The keystone dialog box appears. Correct keystone distortion with the Point ed buttons. Keystone adjustment can be stored (p.42). Reduce the upper width with the Point e button. Reduce the lower width with the Point d button. Keystone Correction Remote Control KEYSTONE button POINT ed buttons Focus Adjustment Top Control KEYSTONE button ON - OFF POWER KEYSTONE INPUT WARNING LAMP REPLACE MENU - VOLUME + VOLUME SELECT POINT ed buttons

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER/VIDEO button ✔Note: •See the next page for the description of other buttons. Press the FREEZE button to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. FREEZE button Press the COMPUTER or VIDEO button to select an input source. See pages 26, 35–36 for more details. COMPUTER/VIDEO button FREEZE button 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Sound Menu icon. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Press the MUTE button on the remote control to turn off the sound. To restore the sound to its previous level, press the MUTE button again or press the VOLUME+/– buttons. Mute function is also effective for AUDIO OUT jack. Press the Point 7 8 buttons to turn off the sound. The mute dialog box display is changed to “On” and the sound is turned off. To restore the sound to its previous level, press the Point 7 8 buttons again. Press the Point ed buttons to move the red frame pointer to the desired item, and then press the SELECT button. Approximate level of the volume. Exit the Sound Menu. Approximate level of the volume. Press the MUTE button to set the Mute function On or Off. The display disappears after 4 seconds. Sound Menu Sound Menu icon Volume Remote Control VOLUME+ button VOLUME- button MUTE button Volume Mute Press the Point 8 button to turn up the volume; press the Point 7 button to turn down the volume. Mute Direct Operation Menu Operation Sound Adjustment Top Control VOLUME+/- buttons - VOLUME + VOLUME SELECT

other buttons. KEYSTONE button (See page 23.) POINT ed buttons black out ➜the captured image ➜normal ➜ • • • • • Press the NO SHOW button to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as “User” in the Logo selection (p.43), the screen changes each time you press the NO SHOW button as follows. “No show” disappears after 4 seconds. NO SHOW button Press the AUTO PC button to operate the Auto PC function. See page 28 for more details. AUTO PC button Press the D.ZOOM buttons to zoom in and zoom out the images. See page 34 for more details. D.ZOOM buttons Press the P-TIMER button. The timer display “00:00” appears on the screen and the timer starts to count time (00:00–59:59). To stop the P-Timer, press the P-TIMER button. Press the P-TIMER button again, then the P-timer display disappears. P-TIMER button LAMP CONTROL button P-Timer display Press the IMAGE button to select an image level of the screen. See pages 31, 38 for more details. IMAGE button LAMP CONTROL button P-TIMER button IMAGE button VOLUME +/- buttons (See page 24.) Press the LAMP CONTROL button to select the lamp mode for changing the brightness of the screen. Normal ....Normal brightness Auto ........Brightness according with the input signal Eco ..........Lower brightness reduces the lamp power consumption and extends the lamp life. For details, see page 23. KEYSTONE button

COMPUTER button on the remote control to select either Computer 1 or Computer 2. Before using the INPUT or COMPUTER buttons, select the correct input source through Menu operation as described below. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. 1 Input Menu Use the Point ed buttons to move the red arrow pointer to either Computer 1 or Computer 2, and then press the SELECT button. 2 After the Source Select Menu appeared for Computer 1, move the pointer to RGB and then press the SELECT button. 3 Input Menu COMPUTER button Computer 1 Computer 2* Input Source Selection Direct Operation Menu Operation Computer Input Move the pointer (red arrow) to Computer 1 and press the SELECT button. Input Menu icon Move the pointer (red arrow) to Computer 2 and press the SELECT button. Move the pointer to RGB and press the SELECT button. Source Select Menu Remote Control COMPUTER button ✔Notes: •Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is set as Monitor out (p.45). •Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only the RGB signal. Computer 1 Video Computer 2* INPUT button Top Control INPUT button ON - OFF POWER KE INPUT WARNING LA MENU SELECT Computer 1 *See Notes at the bottom of this page.

function operates to adjust the projector. PC System Menu The PC System Menu icon The selected system is displayed. Available system selection. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC System Menu icon. Use the Point ed buttons to move the red arrow pointer to the desired system, and then press the SELECT button. 1 2 PC System Menu Custom Mode (1–5) set in the PC Adjust Menu (pp.29–30). PC system can also be selected manually. Computer System Selection The projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If computer is selected as a signal source, the projector automatically detects the signal format and tunes to project proper images without any additional setting. (Signal formats provided in this projector is shown on page 63.) One of the following messages may appear when: The projector cannot recognize the connected signal conforming to the provided PC Systems. “Auto” is displayed on the PC System Menu icon and the Auto PC Adjustment function works to display proper images. If images are not projected properly, adjust manually. (pp.29–30) There is no signal input from computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 58.) Auto ----- The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1–5 (pp.29–30). Mode 1 A PC System provided in the projector is selected. The projector selects a proper system provided in the projector and displays it. SVGA 1 Selecting Computer System Manually *Mode 1 and SVGA 1 are examples.

positions to conform to your computer. Move the red frame pointer to the Auto PC Adj. item and press the SELECT button. “Please wait...” appears while Auto PC adjustment is in process. PC Adjust Menu PC Adjust Menu icon To store the adjusted parameters The system parameters adjusted in the Auto PC Adjustment can be stored in the projector. Once parameters are stored, the setting can be done just by selecting a Mode in the PC System Menu (p.27). See “Store” on page 30, for details. ✔Notes: •Fine sync, Total dots, Horizontal, and Vertical positions of some computers cannot be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.29–30). •The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu (p.27). Auto PC Adjustment Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to PC Adjust Menu. 1 2 Use the Point ed buttons to move the red frame pointer to Auto PC Adj. and then press the SELECT button twice. Auto PC Adj. Menu Operation The Auto PC adjustment function can be operated directly with the AUTO PC button on the remote control. Remote Control AUTO PC button Direct Operation

Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Press the Point 7 8 buttons to adjust the value. Move the red frame pointer to the desired item and press the SELECT button. PC Adjust Menu PC Adjust Menu icon Use the Point 7 8 buttons to adjust the value to cut off flicker from the image displayed (from 0 to 31). Fine sync Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image. Total dots Use the Point 7 8 buttons to adjust the horizontal picture position. Horizontal Use the Point 7 8 buttons to adjust the vertical picture position. Vertical Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer. Current mode Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment. Clamp Press the SELECT button here to move on to other items. Use the Point 7 8 buttons to adjust the value. Status (Stored/Free) of the selected Mode. Selected Mode Press the SELECT button at “Current mode” to show the information of the connected computer. Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas (Mode 1–5) to store those parameters manually adjusted, which allows you to recall the setting for a specific computer.

displayed by this projector. Display area H Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Display area V Reset Store Exit the PC Adjust Menu. Quit To store the adjusted data, select “Store” and then press the SELECT button. Move the red arrow pointer to one of the Mode 1 to 5 in which you want to store, and then press the SELECT button. To reset the adjusted data, select “Reset” and press the SELECT button. A confirmation box appears and then select “Yes.” All adjustments return to their previous figures. Mode free Vacant Mode Values of “Total dots,” “Horizontal,” “Vertical,” “Display area H,” and “Display area V.” Close this dialog box. To store adjusted data To clear adjusted data To clear the stored data, select “Mode free” and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. ✔Note: •Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.27). This Mode has stored parameters. Move the red frame pointer to an item and press the SELECT button.

Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired level and then press the SELECT button. Move the red frame pointer to the desired level and press the SELECT button. The image level being selected. Image Select Menu Normal picture level preset on this projector. Standard Picture level with improved halftone for graphics. Real For viewing the image projected on a blackboard. See above for further description. Blackboard(Green) Image Select Menu icon Select an image level from among Dynamic, Standard, Real, Blackboard (Green), Image 1, Image 2, Image 3, and Image 4 with the IMAGE button on the remote control. IMAGE button Dynamic Real Image 1 Image 2 Image 3 Normal picture level preset on the projector. Picture level with improved halftone for graphics. Standard Real Image 1–4 Image Level Selection Direct Operation Menu Operation Image 4 User preset image in the Image Adjust Menu (p.33). Image 1–4 Blackboard (Green) For viewing the image projected on a blackboard. This mode assists to enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Blackboard(Green) For viewing pictures in a bright room. Dynamic For viewing pictures in a bright room. Dynamic User preset image in the Image Adjust Menu (p.33). Standard Remote Control IMAGE button

adjust the value. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item, and then press the SELECT button. The level of each item is displayed. Use the Point 7 8 buttons to adjust each level. Move the red frame pointer to the desired item and then press the SELECT button. Image Adjust Menu Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63). Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Contrast Brightness Image Adjust Menu icon Press the Point 7 button to lighten the red tone; press the Point 8 button to deepen the red tone (from 0 to 63). White balance (Red) Press the Point 7 button to lighten the green tone; press the Point 8 button to deepen the green tone (from 0 to 63). White balance (Green) Press the Point 7 button to lighten the blue tone; press the Point 8 button to deepen the blue tone (from 0 to 63). White balance (Blue) Selected Image level Use the Point 7 8 buttons to select the desired Color temp. level (XLow, Low, Mid, or High). Color temp. Image Level Adjustment ✔Note: •After adjusting the White balance Red, Green, or Blue, the Color temp. level will change to “Adj.”. Use the Point 7 8 buttons to adjust the gamma value to get better balance of contrast (from 0 to 15). Gamma Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness the image (from 0 to 15). Sharpness To reset the adjusted data, select “Reset” and press the SELECT button. A confirmation box appears and then select “Yes.” All adjustments return to their previous figures. Reset

Quit To store the adjusted data, select “Store” and press the SELECT button. The Image Level Menu appears. Use the Point ed buttons to choose one of the four image level and press the SELECT button. A confirmation box appears and then select “Yes.” The stored data can be called up by selecting “Image” in the Image Level Selection on page 31. Move the red frame pointer to the desired image level (from Image 1 to 4) and then press the SELECT button. A confirmation box appears, then select “Yes.” Store item Press the SELECT button at this item to store the adjusted data. This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. 1 Move the red frame pointer to the function and press the SELECT button. Use the Point ed buttons and move the red frame pointer to the desired function and then press the SELECT button. 2 Screen Menu Screen Menu icon Screen Size Adjustment Wide Provide the image to fit the screen size. Normal True Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector automatically switches to the panning mode. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows turn red. When reached to the correction limit, the arrows disappear. Provide the image to fit wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9. Full screen Provide the full screen image. ✔Notes: •This projector cannot display any resolution higher than 1600 x 1200. If your computer’s resolution is higher than that, lower the resolution before connecting to the projector. •The image data other than 1024 x 768 is modified to fit the screen size in initial mode. •True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.27).

disappears and “D. zoom +” is displayed. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM e button on the remote control. Digital zoom + When Digital zoom – is selected, the On-Screen Menu disappears and “D. zoom –” is displayed. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM d button on the remote control. To exit the Digital zoom +/– mode, press any button except the D.ZOOM ed, SELECT, and Point buttons. To return to the previous screen size, select a screen size in the Screen Size Adjustment or select an input source from the Input Source Selection (p.26) again, or adjust the screen size with the D.ZOOM ed buttons. Digital zoom – Remote Control D.ZOOM + button POINT buttons SELECT button D.ZOOM - button For zooming in and out the images ✔Notes: •The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p.30). •The minimum compression ratio is limited depending on the input signal or when the Keystone function is working. •True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.27). •Digital zoom +/– cannot be selected when Full screen or True is selected. Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds and then the Aspect dialog box appears. Scale H/V............ Adjust the Horizontal/Vertical screen scale. H&V.................... When set to “On,” the aspect ratio is fixed. “Scale V” appears dimmed and becomes unavailable. Adjust “Scale H,” then the screen scale is automatically modified based on the aspect ratio. Position H/V ....... Adjust the Horizontal/Vertical screen position. Common ............ Save the adjusted scale. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset.................. Reset the Common data. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.” Custom ✔Notes: •When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears. •The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. Press the SELECT button at Common or Reset, to display a confirmation box.

on the remote control to select “Video.” Before using INPUT or VIDEO buttons, select the correct input source through menu operation as described below. Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. Use the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu . 1 2 Move the pointer to Video and press the SELECT button. VIDEO Move the pointer to the desired source and press the SELECT button. Source Select Menu (VIDEO) Input Menu Move the pointer to the desired source that and then press the SELECT button. 3 When selecting “Auto,” the projector automatically detects the incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1. S-Video 2. Video Auto When the video input signal is connected to the VIDEO jack, select Video. Video When the video input signal is connected to the S-VIDEO jack, select S-Video. S-Video Input Source Selection (Video, S-Video) Direct Operation Menu Operation Input Menu icon Video Input Remote Control VIDEO button INPUT button Top Control INPUT button ON - OFF POWER KEYSTON INPUT WARNING LAMP RE MENU - VO + VO SELECT Video Computer 2* Computer 1 ✔Note: •Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is set as Monitor out (p.45). *See Note at the bottom of this page.

on the remote control to select Computer 1. Before using INPUT or COMPUTER buttons, select the correct input source through Menu operation as described below. Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. 1 Computer 1 Input Menu Use the Point ed buttons to move the red arrow pointer to Computer 1 and then press the SELECT button. 2 After the Source Select Menu appeared for Computer 1, move the pointer to Component or RGB (Scart) and then press the SELECT button. 3 COMPUTER button Computer 1 Computer 2* Input Source Selection (Component, RGB Scart 21-pin) Direct Operation Menu Operation Move the pointer (red arrow) to Computer 1 and press the SELECT button. Input Menu icon Move the pointer to Component or RGB (Scart) and press the SELECT button. Source Select Menu Remote Control COMPUTER button When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Component-VGA Cable, select Component. Component When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart). RGB (Scart) ✔Notes: •Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is set as Monitor out (p.45). •Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only RGB signal. Computer 1 Video Computer 2* INPUT button Top Control INPUT button ON - OFF POWER KEYSTO INPUT WARNING LAMP R MENU - VO + V SELECT *See Note at the bottom of this page.

Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. 1 Video System Selection AV System Menu (Video or S-Video) AV System Menu (Component) Use the Point ed buttons to move the red arrow pointer to the desired system and then press the SELECT button. 2 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Move the pointer to the desired system and press the SELECT button. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. Auto COMPONENT VIDEO SIGNAL FORMAT Video or S-Video Component The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. Auto AV System Menu icon The selected system is displayed. Move the pointer to the desired system and press the SELECT button. AV System Menu icon The selected system is displayed. ✔Note: •The AV System Menu cannot be selected when selecting RGB (Scart).

Press the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired level and then press the SELECT button. Move the red frame pointer to the desired image level and press the SELECT button. The image level being selected. Image Select Menu Normal picture level preset on this projector. Standard Picture level adjusted for the picture with fine tone. Cinema Blackboard (Green) User preset image in the Image Adjust Menu (pp.39–40). Image1–4 Image Select Menu icon Select an image level from among Dynamic, Standard, Cinema, Blackboard (Green), Image 1, Image 2, Image 3, and Image 4 with the IMAGE button on the remote control. Normal picture level preset on this projector. Standard Picture level adjusted for the picture with fine tone. Cinema Blackboard(Green) User preset image in the Image Adjust Menu (pp.39–40). Image 1–4 IMAGE button Dynamic Cinema Image 1 Image 2 Image 3 Image 4 Image Level Selection Direct Operation Menu Operation For viewing the image projected on a blackboard. This mode assists to enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. For viewing the image projected on a Blackboard. See above for further description. Blackboard (Green) For viewing picture in a bright room. Dynamic For viewing pictures in a bright room. Dynamic Standard Remote Control IMAGE button

to adjust the value. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button. The level of each item is displayed. Adjust each level by pressing the Point 7 8 buttons. Move the red frame pointer to the desired item and then press the SELECT button. Image Adjust Menu Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63). Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Contrast Brightness Press the SELECT button here to display other items. Image Adjust Menu icon Press the Point 7 button decrease the intensity of the color; press the Point 8 button increase the intensity of the color (from 0 to 63). Use the Point 7 8 buttons to adjust the tint value to get a proper color balance (from 0 to 63). Color Tint Press the Point 7 button to lighten the red tone; press the Point 8 button to deepen the red tone (from 0 to 63). White balance (Red) Press the Point 7 button to lighten the green tone; press the Point 8 button to deepen the green tone (from 0 to 63). White balance (Green) Press the Point 7 button to lighten the blue tone; press the Point 8 button to deepen the blue tone (from 0 to 63). White balance (Blue) Press the SELECT button here to display previous items. ✔Notes: •The Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N. •After adjusting the White balance Red, Green or Blue, the Color temp. level will change to “Adj.”. Image Level Adjustment Use the Point 7 8 buttons to select the desired Color temp. level (XLow, Low, Mid, or High). Color temp.

SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select “Yes.” Stored data can be called up by selecting “Image” in the Image Level Selection on page 38. Image Level Menu Move the red frame pointer to an image item to be set and then press the SELECT button. To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select “Yes.” All adjustments return to their previous figures. Reset Store Exit the Image Adjust Menu. Quit ✔Note: • Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.37). Store item An interlaced video signal can be displayed in a progressive picture. Select one of the following options. Off.......... Disabled. L1........... For an active picture. L2........... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Progressive Noise reduction Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off.......... disabled. L1........... lower reduction L2........... higher reduction A confirmation box appears and then select “Yes.” Use the Point 7 8 buttons to adjust the gamma value to get better balance of contrast (from 0 to 15). Gamma Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15). Sharpness

Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. Use the Point ed buttons and move the red frame pointer to the desired function and then press the SELECT button. 1 2 Move the red frame pointer to the desired function and press the SELECT button. Screen Menu Screen Menu icon Provide the image at a wide screen ratio of 16:9. Wide Provide the image at a normal video aspect ratio of 4:3. Normal Screen Size Adjustment Adjust the screen scale and position manually. Press the SELECT button at Custom icon. “Custom” is displayed on the screen for a few seconds and then the Aspect dialog box appears. Scale H/V............ Adjust the Horizontal/Vertical screen scale. H&V.................... When selecting “On,” the aspect ratio is fixed. “Scale V” appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V ....... Adjust the Horizontal/Vertical screen position. Common ............ Save the adjusted scale. Press the SELECT button at Common to display the confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset.................. Reset the Common data. Press the SELECT button at Reset to display the confirmation box. To reset, press the SELECT button at “Yes.” Custom ✔Notes: • Wide is not available when 720p, 1035i, or 1080i is selected in the AV System Menu (p.37). • When no signal is detected, Normal is set automatically and “Aspect”screen disappears. • The adjustable range of Scale H/V and Position H/V can be limited depending on the input signal. Press the SELECT button at Common or Reset, to display the confirmation box.

function is “On,” a blue image is displayed while the input signal is not detected. Keystone Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, or Japanese. Set the red framed pointer to the item and press the SELECT button. Use the Point ed buttons to move the red frame pointer to the item that you want to set and then press the SELECT button. The Setting dialog box appears. SELECT button Press the SELECT button at Language item, the Language Menu appears. Setting Menu (Language) Setting Menu icon This function corrects distortion of a projected image. Select either Store or Reset with the Point 7 8 buttons, and then press the SELECT button. The keystone dialog box appears. Correct keystone with the Point ed buttons (p.23). Store ........ Store the keystone correction even when the AC power cord is unplugged. Reset ....... Reset the keystone correction when the AC power cord is unplugged. Setting Setting This projector has Setting menu that allows you to set up the other various functions described as follows: Press the SELECT button at this item to display the other languages. Press the Point 7 8 buttons to switch on/off. This function decides to display On-Screen Displays. On ...................... Display all the On-Screen Displays. Use this function when you want to project images after the lamp becomes bright enough. This mode is set as a default.. Countdown off... Display the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off...................... Do not show On-Screen Displays. except: ● On-Screen Menu ●“Power off?” ● P-Timer ●“No signal” for Power management item (p.45) ● ”Please wait...” ● White arrows for panning mode (pp.33–34) Press the SELECT button at this item to close the dialog box.

projected and use it for a start-up display or interval of presentations. After capturing the projected image, go to the Logo select function and set it to “User.” Then the captured image is displayed when turning on the projector next time or pressing the NO SHOW button (p 25). To capture the image, select “Yes.” To cancel the Capture function, select “No.” Select "Yes" to capture the projected image. Select "Yes" to stop capturing. Capture Logo select This function decides the start-up display as follows: User ......... The image you captured Default ..... The factory-set logo Off............ Countdown only Logo (Logo and Logo PIN code lock settings) This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions. Logo select ✔Note: • When “On” is selected in Logo PIN code lock function, Logo select and Capture functions cannot be selected. ✔Notes: •Before capturing an image, select "Standard" in the Image Select Menu to capture a proper image (pp.31, 38.). •A signal from a computer can be captured up to XGA(1024x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. •When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone adjustment. •When the Logo PIN code lock function is “On,” Capture menu cannot be selected. •When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.

Quit Pointer Enter a Logo PIN code Use the Point 7 8 buttons to select a number and press the SELECT button to fix the number; the number changes to “✳.” If you fixed an incorrect number, move the pointer to “Set” or “Clear” once by pressing the Point d button, then return to “Logo PIN code.” Enter the correct number. Repeat this step to complete entering a four-digit number. When the four-digit number is fixed, the pointer automatically moves to “Set.” Press the SELECT button so that you can change the Logo PIN code lock setting. If you entered an incorrect Logo PIN code, “Logo PIN code,” the numbers (✳✳✳✳) will turn red and disappear. Enter the Logo PIN code all over again. After a correct Logo PIN code is entered, the following dialog box appears. Select On/Off by pressing the Point 7 8 buttons or change the Logo PIN code. Change the Logo PIN code Logo PIN code can be changed to your desired four-digit number. Select “Logo PIN code change” with the Point d button and press the SELECT button. Set a new Logo PIN code. Be sure to note the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN code lock function on pages 47–48. Logo PIN code lock This function prevents an unauthorized person from changing the screen logo. Off.......the screen logo can be changed freely from the Logo select menu (p.43). On .......the screen logo cannot be changed without the Logo PIN code. If you want to change the Logo PIN code lock setting, enter a Logo PIN code along the following steps. The initial Logo PIN code is set “4321” at the factory. Logo PIN code lock Setting CAUTION: WHEN YOU HAVE CHANGED THE LOGO PIN CODE, TAKE A MEMO AND KEEP IT SECURELY. SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED.

and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen. Terminal The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.9). Select Computer 2 or Monitor Out with the Point 7 8 buttons. Computer 2 .......... computer input Monitor Out ......... monitor out Terminal function is not available when selecting Computer 2 to the input source. Change the input source to the others (Computer1 or Video) so that the Terminal function is available (pp.26, 35–36). Power management Time left before Lamp is off. Press the SELECT button at Power management and this box appears. Select one of three settings with the Point 7 8 buttons, and go to the timer with the Point ed buttons and set time with the Point 7 8 buttons. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the input signal is interrupted and no button is pressed for a certain period. When the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal”appears. The countdown starts to turn off the lamp. Select one of the operations. Ready................. When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp is turned on if the input signal is reconnected or any button on the top control or on the remote control is pressed. Shut down.......... When the lamp has been fully cooled down, the power is turned off. Off...................... Power management function is off. Then set the countdown timer with the Point 7 8 buttons.

automatically turned on just by connecting the AC power cord to an outlet. ✔Note: •Be sure to turn the projector off properly (see “Turning Off the Projector” on page 20). If the projector is turned off in the incorrect sequence, the On start function does not operate properly. Lamp control Remote control This projector provides two different remote control codes; the factory-set, initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in “Code 2,” both the projector and the remote control must be switched to “Code 2.” To change the code for the projector: Select either “Code 1” or “Code 2” in this Setting Menu. To change the code for the remote control: Press and hold both the MENU and IMAGE buttons together for more than 10 seconds. After changing the code, make sure the remote control operates properly. Remote control Press and hold MENU and IMAGE buttons for more than 10 seconds. You can change the brightness of the screen. Normal .... Normal brightness Auto ........ Brightness according with the input signal Eco .......... Lower brightness reduces the lamp power consumption and extends the lamp life. On start ✔Notes: •When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector. •When the batteries of the remote control are replaced, the remote control code automatically returns to the initial code (Code 1).

This function allows you to use Key lock, PIN code lock, and Alarm functions to set the security for the projector operation. PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off..........The projector is not locked with the PIN code. On1.......Requires to enter a PIN code every time turning on the projector. On2........Requires to enter a PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code. Whenever you change the PIN code lock setting or the PIN code (a four-digit number), you are required to enter the PIN code. “1234” is set as the initial PIN code at the factory. When the projector is locked with the PIN code, the PIN code lock symbol appears on the menu bar. PIN code lock This function locks operation of the top control and remote control. It helps to prevent operation by an unauthorized person. ........ Unlocked. ........ Locks operation of the top control. To unlock, use the remote control. ........ Locks operation of the remote control. To unlock, use the top control. If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. Key lock Select Key lock and this dialog box appears. Use the Point ed buttons to choose one of the options and select “Yes” to activate it. Key lock

number. Select “PIN code change” with the Point d button, and press the SELECT button to display the New PIN code input dialog box. Select a number with the Point 7 8 buttons and fix the number with the SELECT button. Repeat it to complete entering a four-digit number. When the four-digit number is fixed, the pointer automatically moves to “Set.” Then press the SELECT button. Change the PIN code Change the PIN code Select PIN code change and press the SELECT button. The New PIN code input dialog box appears. The entered numbers are displayed for confirmation. Change the PIN code lock setting Select a desired setting with the Point 7 8 buttons. CAUTION: WHEN YOU HAVE CHANGED THE PIN CODE, TAKE A MEMO AND KEEP IT SECURELY. IF YOU FORGET YOUR PIN CODE, THE PROJECTOR CAN NO LONGER BE STARTED. Alarm This function allows you to configure the Alarm operation. See pages 50–52 for the Antitheft alarm function. Select Off, On1, or On2 with the Point 7 8 buttons and then move the red frame pointer to “Quit” with the Point d button. Press the SELECT button to close the dialog box. Change the PIN code lock setting Enter a PIN code Use the Point 7 8 buttons to select a number and press the SELECT button to fix the number; the number changes to “✳.” If you fixed an incorrect number, move the pointer to “Set” or “Clear” once by pressing the Point d button, then return to “PIN code.” Enter the correct number. Repeat this step to complete entering a four-digit number. When the four-digit number is fixed, the pointer automatically moves to “Set.” Press the SELECT button so that you can change the following PIN code lock settings. If you entered an incorrect PIN code, “PIN code” and the number (✳✳✳✳) turn red and disappear. Enter the PIN code all over again. Enter a PIN code Pointer The input numbers change to “✳” for security reasons. When the pointer automatically moves to “Set,” press the SELECT button. Quit

counter. When replacing the projection lamp, reset the lamp replacement counter by using this function. See page 57 for operation. Lamp counter Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock and the lamp counter to the factory default settings. Select Factory default and this box appears. Select “Yes,” and the next box appears. Factory default Select “Yes” to activate it. This function provides the following options in the cooling fans’ operation after turning off the projector (p.20). L1........... Normal operation L2........... Slower and lower-sound than the normal operation (L1), but it takes longer to cool down the projector. Fan Setting Exit the Setting Menu. Quit

Antitheft Alarm Function The Antitheft alarm function is provided to prevent the projector from being stolen. When this function is set to “On,” the alarm rings as an unauthorized person tries to move the projector. Press the F button twice to turn the alarm function on. The ALARM indicator blinks for a few seconds and the projector enters the warning mode. While the Antitheft alarm function is on, the projector emits a low-pitched sound when detecting a vibration. When the projector does not detect a vibration for a few seconds after the sound, it goes back to the warning mode. When the projector detects more vibrations after the low- pitched sound, the alarm starts ringing. The Alarm operation configuration (Alarm volume, Sensitivity, and Ringing time) can be selected in the Alarm function on page 51. Set the alarm Release the alarm setting ✔Notes: •This function is not a guarantee against stealing. •The alarm does not ring while the AC power cord is connected to an outlet even if the projector detects vibrations. •Pressing the buttons is always accompanied by a sound. If no sound is produced after pressing a button, you need to press it again. Side Control ALARM indicator F button button 1, 2, 3 Set and release the Antitheft alarm function ✔Notes: •You can test the alarming sound without setting the alarm. Press and hold the F button, then the alarm starts ringing. •If you want to stop the alarm while it is ringing, insert the AC power cord to an outlet or press the F button and enter the four- digit PIN code number. Before operating the Antitheft alarm function, install a battery in the projector (see page 52 for installation). Install a battery Press the F button and enter the four-digit PIN code number within about 10 seconds. (The default PIN code is set to “1111.”) When the alarm is released, you will hear a high- pitched confirmation sound. When entering an incorrect PIN code, you will hear a low- pitched sound. If you enter an incorrect PIN code three times in a row, the alarm starts ringing.

CAUTION: WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE AND KEEP IT SECURELY. IF YOU FORGET YOUR PIN CODE, SOME SETTINGS OF THE ANTITHEFT ALARM FUNCTION CAN NO LONGER BE CHANGED. Change the PIN code Press the F button and enter the four-digit PIN code number within about 10 seconds. The ALARM indicator blinks red for a few seconds and a high- pitched confirmation sound is produced. Other settings Reset the settings Select Factory default in the Setting menu to reset the settings for the Antitheft alarm function. Side Control 1 2 While the indicator is blinking, enter a new PIN code, then you will hear a high-pitched confirmation sound and the ALARM indicator is turned off. When entering an incorrect PIN code, you will hear a low-pitched sound. If you enter incorrect PIN code three times in a row, the alarm starts ringing. The PIN code for the Antitheft alarm function is a combination of 1, 2, or 3. Use the buttons 1, 2, and 3 to enter the PIN code. The default PIN code is set to “1111.” ✔Note: •This is effective only when the Antitheft alarm setting is released. ALARM indicator F button button 1, 2, 3 The Alarm operating configuration can be changed when the Antitheft alarm function is set to “Off.” See page 50 to set or release this function. Press the SELECT button at Alarm icon in the Setting Menu to display the Alarm setting dialog box. Use the Point ed buttons to select Alarm volume, Sensitivity, or Ringing time, and set each item with the Point 7 8 buttons. Alarm volume Small, Medium, Large Sensitivity Low .....................Less sensitive Medium ..............Normal sensitivity High ....................Highly sensitive (default) Ringing time 10 seconds .........Rings about 10 seconds (default). 60 seconds .........Rings about 60 seconds. Long time............Rings until the end of the battery life. Alarm Press the SELECT button at the Alarm icon to display the Alarm setting dialog box. ✔Notes: •The Alarm icon appears dimmed and can be unavailable when the Antitheft alarm function is set to “On” or if the battery is not installed or it is coming to the end of its life. •While the Alarm icon is selected, the Antitheft alarm setting buttons on the side panel can be unavailable. •When selecting “Long time” option in the Ringing time, the duration of alarm sounding differs depending on the battery life. Set the Alarm volume, Sensitivity, or Ringing time with the Point 7 8 buttons. Alarm operating configuration

How to install the battery To use the Antitheft alarm function, you need to install a battery into the projector. (Use a SANYO Electric Co., Ltd. CR2 3V lithium battery.) Unplug the AC power cord from a wall outlet before installing the battery. Remove the screw and open the battery cover on the bottom of the projector. When the battery is installed properly, the ALARM indicator blinks for about 10 seconds. After placing the battery, put the cover back and secure it with the screw. When the battery comes to the end of its life, the ALARM indicator flashes and the warning sound is produced at some intervals. Replace the battery by following the procedures above. ✔Notes: •The PIN code and settings you have changed are effective even after the battery is changed. •When changing the battery, set the Antitheft alarm function to “Off.” Otherwise the alarm starts ringing as you try to open the battery cover. Loosen the screw and open the battery cover. Install the battery, then put back the battery cover and secure it with the screw. Screw To insure safe operation, please observe the following precautions: ●Do not keep the battery mixing with wire or metal products to avoid causing a short. ●Keep the battery away from babies and children to prevent them from swallowing it. ●Do not charge the battery. ●Do not disassemble or apply pressure to transform the battery. ●Avoid contact with water or liquid matter. ●Do not expose to moisture or heat. ●If the battery has leaked, carefully wipe the battery compartment clean and install new battery. ●Do not replace the battery with an incorrect type or in an incorrect direction. ●Dispose of used battery after insulating the battery by putting an insulating tape on either or both sides of the top/bottom of the battery. ●Dispose of used battery by following the local regulations.

WARNING indicator and the POWER indicator to take proper maintenance. Top Control Warning Indicator The projector is shut down and the WARNING indicator is blinking red. When the temperature inside the projector reaches a certain level, the projector is automatically shut down to avoid overheating. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the POWER ON-OFF button. ✔Note: •The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the projector is turned on again, the WARNING indicator stops blinking. Then check the matters below: – Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if ventilation slots are not blocked. – Has the projector been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. – Are the air filters clean? Clean the air filters periodically. (p.54) Top Control The projector is shut down and the WARNING indicator lights red. When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the WARNING indicator lights red. In this case, unplug the AC power cord and plug it, and then turn on the projector once again to verify operation. If the projector cannot be turned on and the WARNING indicator lights red, unplug the AC power cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. Maintenance and Cleaning ON - OFF POWER KEYSTONE INPUT WARNING LAMP REPLACE MENU SELECT ON - OFF POWER KEYSTONE INPUT WARNING LAMP REPLACE MENU SELECT WARNING blinking red WARNING emit a red light

Turn off the projector, and unplug the AC power cord from the AC outlet. Turn over the projector and remove the air filters by pulling the latches upward. 1 2 Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters become clogged with dust particles, they will reduce cooling fans’ effectiveness and may result in a buildup of internal heat and adversely affect the life of the projector. Clean the air filters by following the steps below. Clean the air filters with a brush or rinse them softly. When rinsing the air filters, dry them well. 3 Replace the air filters properly. Make sure that the air filters are fully inserted. 4 CAUTION Do not operate the projector with the air filters removed. Dust may accumulate on the optical elements degrading picture quality. Do not put anything into the air intake vents. Otherwise it may result in malfunction of the projector. RECOMMENDATION We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality. When using the projector under dusty or smoky conditions, dust may accumulate on the lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. ✔Note: •When reinserting the air filters, be sure that the slit part is facing the outer side. Air filters Pull up and remove. Attaching the Lens Cover When moving the projector or while it is not in use, replace the lens cover. 1 2 Thread the string through the hole on the lens cover and then tie a knot in the string to secure it in place. Thread the other end of the string through the hole on the bottom of the projector. Then pass the lens cover through the resulting loop of the string and pull it to tighten the knot. 2 1 Cleaning the Air Filters

Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When it is heavily soiled, use a small amount of mild detergent and finish with the cleaning cloth. Avoid excessive use of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet. When the projector is not in use, put the projector in an appropriate case to avoid dust and being scratched. Unplug the AC power cord before cleaning. First, remove the dust with a blower. Then gently wipe the lens surface. Use a lens cleaning paper moistened with methyl alcohol (methanol). Avoid excessive use of cleaner. Do not use abrasive cleaners, solvents, or other harsh chemical cleaners to avoid damages the lens. When the projector is not in use, replace the lens cover. Cleaning the Projection Lens CAUTION This projector is equipped with a plastic lens. Do not rub the lens with a hard fiber cloth or hit it with a something hard to prevent the lens from scratching. Do not use a chemical cleaner (liquid and solid) to avoid deteriorating the lens.

Follow these steps to replace the lamp. Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ●Model No. of your projector : PLC-XL40 ●Replacement Lamp Type No. : POA-LMP90 (Service Parts No. 610 323 0726) For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury. Allow the projector to cool for at least 45 minutes before you open the Lamp cover. The inside of the projector can become very hot. CAUTION Screw Turn off the projector and unplug the AC power cord. Let the projector cool for at least 45 minutes. Remove the two screws that secures the lamp. Lift the lamp out of the projector by using the built in handle. 1 3 Replace the lamp with a new one and secure it with the two screws. Make sure that the lamp is set properly. Put the lamp cover back and secure it with the screw. 4 Turn the projector over. Remove the screw that secure the lamp cover, and then open the lamp cover. 2 Connect the AC power cord to the projector and turn on the projector. 6 Reset the lamp replacement counter. See “Lamp Replacement Counter” on the next page. 5 Handle Screw CAUTION Screw Lamp Cover When the projection lamp of the projector reaches the end of its life, the LAMP REPLACE indicator emits a yellow light. If this indicator lights yellow, replace the lamp with a new one promptly. Top Control Lamp Replacement WARNING: TURN OFF THE UV LAMP BEFORE OPENING THE LAMP COVER REPLACE POWER WARNING LAMP This indicator turns yellow when the projection lamp reaches the end of its life.

Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp replacement counter is reset, the LAMP REPLACE indicator stops lighting. Turn the projector on and press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. Use the Point ed buttons to move the red frame pointer to Lamp counter and then press the SELECT button. The first dialog box appears showing the total accumulated lamp time and reset option. If you select Reset, “Lamp replacement counter Reset?” appears. Select “Yes” to continue. 1 2 Another confirmation dialog box appears, and select “Yes” to reset the Lamp replacement counter. 3 This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ●Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps. ●If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion. ●A Lamp may explode as a result of vibration, shock, or degradation as a result of hours of use, as it comes to the end of life. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used. IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN. If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass. LAMP HANDLING PRECAUTIONS Lamp Replacement Counter ✔Note: •Do not reset the Lamp replacement counter without implementing lamp replacement. Be sure to reset the Lamp replacement counter only after replacing the lamp. Select “Yes,” then another confirmation box appears. Select “Yes” again to reset the lamp counter. To reset the lamp counter, move the pointer to Reset and then press the SELECT button. the “Lamp replacement counter Reset?” dialog box appears.

– Make sure you have properly connected the projector to peripheral equipment as described on pages16–18. – Make sure all equipment is connected to an AC outlet and the power is turned on. – When you operate the projector with a computer and it does not project an image, restart the computer. Appendix Problem: – Solutions No power – Plug the power cord of the projector into an AC outlet. – See if the POWER indicator lights red. – Wait 90–120 seconds after the projector is turned off when turning the projector back on. The projector can be turned on after the POWER indicator turns red (see page 20). – Check the WARNING indicator. If the WARNING indicator lights red, the projector cannot be turned on (see on page 53). – Check the projection lamp (see page 56). Image is out of focus. – Adjust focus of the projector (see page 23). – Provide proper distance between the projector and the projection screen (see page 14). – Check the projection lens to see if it needs cleaning (see page 55). – Moving the projector from a cool to warm place may result in moisture condensation on the projection lens. If this occurs, leave the projector off and wait until condensation evaporates. No image – Check the connection between your computer or video equipment and the projector (see pages 16–18). – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to the projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after turning on the projector. – See if the selected system is corresponding with your computer or video equipment (see pages 27, 37). – Select correct input source once again through menu operation (see pages 26 ,35–36). – Make sure the temperature is not out of the specified operating temperature (41 ˚F–95 ˚F [5 ˚C–35 ˚C]). Image is Left/Right reversed. – Check the Ceiling/Rear function (see page 45). Image is Top/Bottom reversed. – Check the Ceiling function (see page 45). No sound – Check the audio cable connection from audio input source. – Adjust the audio source. – Press the Volume + button (see page 24). – Press the Mute button (see page 24).

conformity mark of the European Community (EC). Some displays are not seen – Check the Display function (see page 42). during the operation. PIN code dialog box appears – PIN code lock is being set. Enter a PIN code; the “1234” or numbers at start-up. you have set (see pages 19, 47–48). Computer 2 cannot be selected. – Select Computer 2 in the Terminal function (see page 45). The Terminal function cannot be – The Terminal function cannot be selected after Computer 2 is selected. selected. Select other input source such as Computer 1 or Video with the COMPUTER button or the VIDEO button on the remote control so that the Terminal function can be selected. The Remote Control does not – Check the batteries. work. – Make sure no obstruction is between the projector and the remote control. – Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4’ (5 m). – Make sure the code of the remote control is conformed to that of the projector (see page 46). – Unlock the Key lock function for the remote control (see page 47). Cooling fans are still running after – This is a normal condition. The fans keep running for a certain time the AC plug is disconnected. even after disconnecting the AC plug. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service. Pixelworks ICs used. This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

Computer Input ✽Systems displayed in the System Menu vary depending on an input signal. Computer Input/Video Input Sound Volume Mute Quit On / Off Sound 0 - 63 Input Computer 2 Video Auto Go to System (3) Go to System (3) Video Go to System (3) ✽N/A - - - not applicable Go to System (1) Go to System (2) N/A S-Video RGB( Scart ) Quit Quit System (1) RGB Computer 1 Component Auto PC Adj. Total dots Horizontal Vertical Display area H Display area V Reset Dynamic Real Blackboard (Green) Image 1 Image 2 Image 3 Image Adjust Contrast Brightness Color temp. Red Gamma Store Quit Normal True Wide Full screen Digital zoom + 0 - 63 0 - 63 PC Adjust Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Image Select High 0 - 63 0 - 15 Image 1 Image 2 Image 3 Image 4 Screen Quit Yes / No Reset Yes / No Sharpness 0 - 15 Image 4 Standard Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Quit H-sync freq. V-sync freq. Quit Clamp Current mode Digital zoom – Green Blue 0 - 63 0 - 63 Store Mode free Quit Mid Low XLow Quit Adj. Fine sync. 0 - 31 Custom Scale H / V H&V Position H / V Common Reset Quit Yes / No Yes / No On / Off

On / Countdown off / Off Logo select On / Off On / Off Off On / Off Normal / Auto / Eco Code 1 / Code 2 Keystone Blue back Display Logo Ceiling Rear Power management On start Lamp control Remote control Quit Russian Ready Shut down Quit Timer(1-30 Min) Quit Factory default L1 / L2 Fan Quit Standard Finnish Hungarian Romanian Polish Yes / No Store / Reset Quit Off User Capture Yes / No Off On PIN code change Logo PIN code lock Logo PIN code entry Quit PIN code entry On1 / On2 / Off PIN code change Quit Alarm Default Sensitivity Ringing time Quit Off On Computer 2 /Monitor out Terminal Reset Quit PIN code lock Security Quit Normal Wide 0 - 63 0 - 63 Off Image Adjust Contrast Brightness Color Tint Red Green Blue Sharpness Reset Store Gamma Progressive 0 - 63 0 - 63 0 - 63 0 - 15 0 - 15 Image 1 Screen Yes / No Quit Color temp. Off Noise reduction L1 L2 High Mid Low XLow 0 - 63 0 - 63 Image 2 Image 3 Image 4 L2 L1 Adj. Film Custom Scale H / V H&V Position H / V Common Reset Quit Yes / No Yes / No On / Off Alarm volume Lamp counter Hour(s) Small / Medium / Large Low / Medium / High 10seconds / 60seconds / Long time Key lock Remote control Quit Off Projector

• • • green. • • • red • • • off • • • blinks green. *When the projection lamp reaches the end of its life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 56–57. Indicators and Projector Condition • • • blinks red. The projector is off. (The AC power cord is unplugged.) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator emits a red light and the projector can be turned on. (The WARNING indicator keeps blinking.) Check and clean the air filters. Projector Condition The projector is ready to be turned on with the POWER ON-OFF button. POWER red/green Indicators LAMP REPLACE yellow WARNING red The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. ✽ ✽ ✽ ✽ ✽ The projector is operating normally. The projector is in the Power management mode. ✽ ✽ The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. Check and clean the air filters.

Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.86 74.38 VGA 5 640 x 480 37.86 72.81 VGA 6 640 x 480 37.50 75.00 MAC LC13 640 x 480 34.97 66.60 MAC 13 640 x 480 35.00 66.67 MAC 16 832 x 624 49.72 74.55 MAC 19 1024 x 768 60.24 75.08 SXGA 1 1152 x 864 64.20 70.40 SVGA 1 800 x 600 35.156 56.25 SVGA 2 800 x 600 37.88 60.32 SVGA 3 800 x 600 46.875 75.00 SVGA 4 800 x 600 53.674 85.06 SVGA 5 800 x 600 48.08 72.19 SVGA 6 800 x 600 37.90 61.03 SVGA 7 800 x 600 34.50 55.38 SVGA 8 800 x 600 38.00 60.51 SVGA 9 800 x 600 38.60 60.31 SVGA 11 800 x 600 38.00 60.51 ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) XGA 10 1024 x 768 XGA 11 1024 x 768 XGA 12 1024 x 768 XGA 13 1024 x 768 62.04 77.07 XGA 14 1024 x 768 61.00 75.70 XGA 15 1024 x 768 35.522 86.96 (Interlace) 46.90 58.20 XGA 8 1024 x 768 47.00 58.30 XGA 9 1024 x 768 58.03 72.00 SXGA 4 1280 x 1024 63.48 79.35 36.00 87.17 (Interlace) 63.34 59.98 SXGA 5 1280 x 1024 SXGA 6 1280 x 1024 SXGA 7 1280 x 1024 63.74 60.01 71.69 67.19 SXGA 10 1280 x 960 81.13 76.107 60.00 60.00 XGA 1 1024 x 768 XGA 4 1024 x 768 48.36 60.00 XGA 6 1024 x 768 XGA 7 1024 x 768 56.476 70.07 48.50 60.02 44.00 54.58 SXGA 8 1280 x 1024 SXGA 9 1280 x 1024 63.98 60.02 79.976 75.025 XGA 5 1024 x 768 60.31 74.92 VGA 7 640 x 480 43.269 85.00 575i –––––––– 15.625 50.00 (Interlace) 480i –––––––– 15.734 60.00 (Interlace) SXGA 12 1152 x 900 71.40 75.60 SXGA 11 1152 x 900 61.20 65.20 SVGA 10 800 x 600 32.70 51.09 SXGA 13 1280 x 1024 50.00 86.00 (Interlace) SXGA 2 1280 x 1024 62.50 58.60 SXGA 3 1280 x 1024 63.90 60.00 XGA 2 1024 x 768 68.677 84.997 XGA 3 1024 x 768 60.023 75.03 SXGA 18 1280 x 1024 46.43 86.70 (Interlace) SXGA 19 1280 x 1024 63.79 60.18 SXGA 14 1280 x 1024 SXGA 15 1280 x 1024 SXGA 16 1280 x 1024 SXGA 17 1152 x 900 50.00 94.00 (Interlace) 63.37 60.01 76.97 72.00 61.85 66.00 MAC 1280 x 960 75.00 75.08 MAC 1280 x 1024 80.00 75.08 SXGA 21 1400 x 1050 63.979 60.190 MAC21 1152 x 870 68.68 75.06 UXGA 4 1600 x 1200 93.75 75.00 WXGA 2 1360 x 768 WXGA 3 1376 x 768 WXGA 4 1360 x 768 UXGA 1 1600 x 1200 47.70 60.00 UXGA 2 1600 x 1200 48.36 60.00 UXGA 3 1600 x 1200 56.16 72.00 75.00 60.00 81.25 65.00 WXGA 1 1366 x 768 87.5 70.00 48.36 60.00 SXGA 22 1400 x 1050 65.346 60.116 SXGA 23 1400 x 1050 65.121 59.902 SXGA 20 1280 x 1024 91.146 85.024 WXGA 7 1280 x 768 WXGA 8 1280 x 768 60.289 74.893 68.633 84.837 WXGA 6 1280 x 768 47.776 59.87 1080i/60 1920 x 1080 33.75 60.00 (Interlace) 720p 1280 x 720 1035i 1920 x 1035 45.00 60.00 33.75 60.00 (Interlace) 1080i/50 1920 x 1080 28.12 50.00 (Interlace) 575p 768 x 575 31.25 50.00 480p 640 x 480 31.47 59.88 WXGA 9 1280 x 800 49.600 60.050

10.50” x 4.86” x 9.58” (320 mm x 148 mm x 292 mm) (Not including adjustable feet) Net Weight 7.3 lbs (3.3 kg) Feet Adjustment 0˚ to 10.0˚ Panel Resolution LCD Panel System 0.6” TFT Active Matrix type, 3 panels Panel Resolution 1,024 x 768 dots Number of Pixels 2,359,296 (1,024 x 768 x 3 panels) Signal Compatibility Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N High Definition TV Signal 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i Scanning Frequency H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz Optical Information Projection Image Size (Diagonal) Adjustable from 60” to 80” Projection Lens F 1.85 lens with f 8.1 mm with manual focus Throw Distance 2.49’–3.38’ (0.76 m–1.03 m) Projection Lamp 200 W Interface Video Input Jack RCA Type x 1 S-Video Input Jack Mini DIN 4 pin x 1 Audio Input Jacks RCA Type x 2 Computer Input 1 / Component Input Terminal Analog RGB (Mini D-sub 15 pin) Terminal x 1 Computer Input 2 / Monitor Output Terminal Analog RGB (Mini D-sub 15 pin) Terminal x 1 (In/Out switchable) Computer/ Component Audio Input Jack Mini Jack (stereo) x 1 Service Port Connector Mini DIN 8 pin x 1 USB Connector USB Series B receptacle x 1 Audio Output Jack Mini Jack (stereo) x 1 (Variable) Audio Internal Audio Amp 1.0 W RMS Built-in Speaker 1 speaker, ø1.1” (28 mm) Power Voltage and Power Consumption AC 100–120 V (2.9A Max. Ampere), 50/60 Hz (The U.S.A and Canada) AC 200–240 V (1.4 A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.) Operating Environment Operating Temperature 41˚F–95˚F (5˚C–35˚C) Storage Temperature 14˚F–140˚F (-10˚C–60˚C) Remote Control Battery AA or LR6 1.5V ALKALINE TYPE x 2 Operating Range 16.4’ (5 m)/±30˚ Dimensions 1.9” (W) x 0.87” (H) x 5.7” (D) (49 mm x 22 mm x 145.3 mm) Net Weight 3.53 oz (100 g) (including batteries) Antitheft Alarm Battery CR2 3V LITHIUM BATTERY x 1

: KA-MC-DB10 Presentation Remote Control : POA-RCKIT-03 Presentation Remote Control : POA-RCKIT-04 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. Optional Parts Accessories Owner’s Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries Battery for Antitheft alarm function VGA Cable Lens Cover with String PIN Code Label Alarm Label ●The specifications are subject to change without notice. ●LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.

1 2 3 4 5 8 7 6 SERVICE PORT CONNECTOR Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Series B) 2 3 4 1 R X D ----- ----- GND RTS / CTS GND GND Serial 1 2 3 4 5 6 7 8 COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) Terminal : Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of Terminals Red (R/Cr) Input / Output Ground (Horiz.sync.) Green (G/Y) Input / Output ----- Blue (B/Cb) Input / Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 ----- Horiz. sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) ----- Ground / ----- Vert. sync. ----- 9 13 10 12 11 14 15 T X D

Put on the label below (supplied) to a prominent place of the projector’s body while it is locked with a PIN code. While the projector is locked with the PIN code... Put on the label below (supplied) to a prominent place of the projector’s body while the Antitheft alarm function is set. While the Antitheft alarm function is set...