Sanyo PLC-XW250 - 2600 Lumens Manual 

30 / 64 8.10 Setting Command 8.10.1 CF_LANG Command Command “CF_LANG_%1”[CR] %1 “ENG” --------------------------- Select English “DEU” --------------------------- Select German “FRA” --------------------------- Select French “ITA” ----------------------------- Select Italian “ESP” ---------------------------- Select Spanish “POR” --------------------------- Select Portuguese “NED” --------------------------- Select Dutch “SVE” --------------------------- Select Swedish “RUS” ------------------ ...

44 / 64 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC”[CR] Details Get Fine Sync value Response Acceptable “000_%a”[CR] %a “0000”~“0031” Unacceptable “Error Code”[CR] ----- When the command is invalid due to condition such as Input source 9.5.2 CR_TDOTS Command Command “CR_TDOTS”[CR] Details Get Total Dots value Response Acceptable “000_%a”[CR] %a “nnnn”~“mmmm” (nnnn = Display Dots + Horizontal Position) (mmmm= Maximum value depends on input signal) Unacceptable “Error ...

9 / 64 5. Functional Execution Command Table 5.1 Image Command Table Execute command Item CF_BRIGHT_%1[CR] Set Brightness value CF_CONT_%1[CR] Set Contrast value CF_COLOR_%1[CR] Set Color value CF_TINT_%1[CR] Set Tint value CF_SHARP_%1[CR] Set Sharpness value CF_GAMMA_%1[CR] Set Gamma value CF_WBAL-R_%1[CR] Set White Balance Red value CF_WBAL-G_%1[CR] Set White Balance Green value CF_WBAL-B_%1[CR] Set White Balance Blue value CF_COLTEMP_%1[CR] Set Color Temp. value CF_PROGV_%1[CR] Set /Cancel Progressive Scan CF_NZRED_%1[CR] Set/Can ...

51 / 64 9.8.6 CR_HPOS Command Command “CR_HPOS”[CR] Details Get setting status of Horizontal Position Store Mode Response Acceptable “000_%1”[CR] %1 “-15” ~ “015” Unacceptable “Error Code”[CR] ...

21 / 64 8.5.8 CF_PCSTORE Command Command “CF_PCSTORE_%1”[CR] %1 “MODE1” ---- Store current PC Adjust status to Mode1 “MODE2” ---- Store current PC Adjust status to Mode2 “MODE3” ---- Store current PC Adjust status to Mode3 “MODE4” ---- Store current PC Adjust status to Mode4 “MODE5” ---- Store current PC Adjust status to Mode5 Details Store current PC Adjust status (each parameter status such as Total dots) to Mode1~Mode5. This command operates the same way as storing to Mode1-Mode5 in PC Adjust MENU. This co ...

12 / 64 6.6 Lamp Status Read Command Table Status read command Item CR_LAMPREPL[CR] Get the information for Lamp replacement time CR_LAMPH[CR] Get lamp total running time CR_LAMPCORRESPH[CR] Get corresponding lamp use time CR_LAMPMODE[CR] Get Lamp Mode status CR_LAMPSTS[CR] Get lamp lighting status CR_PROJH[CR] Get projector total running time CR_HMLAMP[CR] Get lamp number CR_LAMPLIFECONTRL[CR] Get lamp life mode 6.7 Sound Status Read Command Table Status read command Item CR_VOLUME[CR] Get Volume value CR_MUTE[CR] Get Sound Mute se ...

58 / 64 9.11.15 CR_RCODE Command Command “CR_RCODE”[CR] Details Get selected Remote Control Code Response Acceptable “000_%a”[CR] %a “001” --------------------------- Code1 is selected “002” --------------------------- Code2 is selected Unacceptable “Error Code” [CR] 9.11.16 CR_SECURITY Command Command “CR_SECURITY” [CR] Details Get Security Mode setting status Response Acceptable “000_%1[CR] %1 “ON” ------------- PJ Lock setting on Menu is ON-1 or ON-2 “OFF” ------------PJ Lock setting on Menu is ...

14 / 64 8. Functional Execution Command 8.1 Format 1. PC issues commands in format as below: Pattern1 : “CF_COMMAND” [CR] Pattern2 : “CF_COMMAND_”%1 [CR] CF_ : Header COMMAND : Character line %1 : Parameter (Character line) _ : Space (To separate COMMAND and Parameter) 2. The projector decodes the received command and when it is ready to receive the next command, it returns the response. “000” [CR] : (0x06, 0x0D) When receiving Functional Execution Command “nnn” [CR] : Except “000” , when it is unable to execute ...