Scag Power Equipment SWZ Operator's Manual

ADJUSTMENT -NOTE- This adjustment is made to allow the steering control levers to be moved out of the neutral latch without engaging reverse. 1. Connect the steering control rods into the steer- ing control levers on the handle. Do not install the hair pin at this time. 2. Turn the swivel joint on the steering control rods until the swivel joint is centered in the slot in the bellcrank. 3. Remove the steering control rods from the machine. Install the speed control spring onto the swivel joint. Reinstall the steering control rods onto the machine and secure using the ...

14KA 15KH 17KA 20CVE 1 48842 Engine 14KA Kawasaki x 1 48844 Engine 15KH Kohler x 1 481066 Engine 17KA Kawasaki x 1 48971 Engine 20CVE Kohler Command x 2 04050-10 Retaining Ring, 1/2" Ext. "E" x x x x 3 04020-02 Hex Nut, 1/4-20 x x x x 4 04010-10 Screw, 1/4-20 x 2" Rnd. Hd. Phil. x x x x 5 421239 Strap, Fuel Tank x x x x 6 481603 Cap, Fuel Tank x x x x 7 48292 Pad, Rubber-Fuel Tank - Upper x x x x 8 46846 Fuel Tank Assy. (incl. 9, 10) x x x x 9 48309 Bushing x x x x 10 48308 Valve, Fuel Shut-off x x x x 11 48059-01 Clamp, Fuel Hose x x x 11A ...

1 HG 2513017 Housing Kit (Incl. Housing, Journal Bearing) 2 HG 2513016 End Cap 3 HG 9004800-2506 Straight Headless Pin 4 HG 9007314-0810 Socket Head Screw 5 HG 2003067 End Cap Gasket 6 HG 2513027 Charge Pump Kit (Incl. Charge Cover, Gerotor Assy., O-Ring) 7 HG 50273 Gerotor Assembly 8 HG 9004101-1340 O-Ring 9 HG 2510064 Charge Relief Valve Kit 10 HG 50095 Socket Head Screw 11 HG 2510027 Check Valve Kit (Incl. Check Plug, Spring, O-Ring, Orifice Check Valve) 12 HG 2513030 Bypass Valve Kit (Incl. Bypass Valve, O-Ring, Back-up R ...

PRINTED1/99 PRINTED IN USA © 1999 SCAG POWER EQUIPMENT DIVISION OF METALCRAFT OF MAYVILLE, INC. ...

19 20 21 7 21 20 24 23 18 25 37 26 27 28 29 30 31 33 83 34 32 31 35 79 14 80 53 1 39 41 49 52 50 55 54 45 11 43 4 44 45 43 47 44 11 48 11 44 45 43 42 46 46A 46B 51 64 65 9 61 14 60 7 56, 56A 61 59 51 62, 62A 40 74 63 76 67 7 77 78 77 57 68 64 51 40 51 35 35 50 14 41 63 40 58 2 SW-SWZ99CD48" 8 66 5 7 70 72 71 6 69 81 3 5 11 10 16 15 15A 12 11 17 36 82 37 13 38 A A 41 73 40 75 14 36A 42B 42A 22 ...

a squealing sound from the underside of the machine is normal. It is caused by the electric clutch plates meshing as the mower comes up to speed. For best equipment life, engage the clutch with the engine at 1/2 throttle, not under full load. If you are not familiar with the operation of the hydrostatic drive and zero turn feature, practice turning and maneuvering with the hand controls before engaging the blades. 5. Release the parking brake. Move the speed adjustment lever to the desired mowing speed. -NOTE- Top speed is suggested on ...