SecurityMan 76001C Operation & User’s Manual

terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan. The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by SecurityMan. SecurityMan assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. All other product names, trademarks and registered trademarks in this document are the proper- ties of their respective holders. FCC Information Notes on FCC’s “Consistent Statement of Information” This product meet the requirements speci- fied in Part 15 of FCC Regulation. Operation rests with the following two conditions: (1) The equipment should not cause any harmful interference. (2) The equipment must receive and process any interference, including any possible interference caused by operation mistakes. After testing the product, we confirm that the camera complies with the provision for class C digital equipment in the 15th part in FCC regulations; and the receiver complies with the limitations for class B digital equipment in Part 15 of FCC regulation. The product generates, applies and emits radio waves. It might cause harmful interferences to wireless communication if not be installed and used following the description of the manual. The product may cause interference in residential area, and the customer should take remedies to eliminate the interference on their own costs. If the product causes any harmful interference to wireless equipment or disturbs the receiving of TV signals (it can be identified by turning on and off the product), you can solve the trouble by fol- lowing methods: - Readjust the product or put it in another place. - Extend the distance between the equipment interfered and the product. - Refer to dealers or experienced radio electrician for help.

period of time specified on the product packaging. This limited warranty shall commence from the date of purchase. SecurityMan Products warranty is not transferable and is limited to the original purchaser. If the product is found to be defective then, as your sole remedy and as the manufac- turer's only obligation, SecurityMan will repair or replace the product . This warranty shall not apply to products that have been subjected to abuse, misuse, abnormal electrical or environmental con- ditions, normal wear and tear or any condition other than what can be considered normal use. Limitation of Liability The liability of SecurityMan arising from this warranty and sale shall be limited to a refund of the purchase price. In no event shall SecurityMan be liable for costs of procurement of substitute prod- ucts or services, or for any lost profits, or for any consequential, incidental, direct or indirect dam- ages, however caused and on any theory of liability, arising from this warranty and sale. These limitations shall apply not with standing any failure of essential purpose of any limited remedy. SecurityMan 15861 Tapia Street, Irwindale, CA 91706, USA Tel: 888-977-3777 Fax: 626-338-3585 Email: [email protected] Website: http://www.securitymaninc.com Copyright 2004 by SecurityMan v2.0

other wireless equipment that operates at the same band. Please turn off one of the equipment to eliminate the interference. Product Assurance 2.4Ghz wireless camera will emit electromagnetic wave, just like other wire- less products. But the output power of the products is lesser than other wire- less products such as mobile phones. The 2.4Ghz wireless camera meets wireless frequency security standards and recommend indexes while work- ing. These standards and indexes are certificated by academic organization and represent the cogitative research of the scientific workers who continu- ously explore and annotate the involved fields. So we believe that our prod- ucts are safe for customers. Operating Restrictions DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for these purposes. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. This product should be placed at least 1 feet away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance. DO NOT use this product for any illegal activities. SecurityMan shall not be responsible for any consequences of illegal conducts by users.

ronment is suitable. • Ensure there is enough space around the receiver for ventilation. • The temperature should be kept between –20˚C and 50˚C (-4F – 122˚F). The relative humidity should remain from 20% to 80%. • Avoid putting the product in places where occur might change rapidly in temperature or humidity • Keep it dry, dustless and avoid exposure in it directly in sunlight • Keep product away from heat sources such as electric heater • Do not use the camera near aggressive chemicals • Do not place product near any magnetic objects Maintenance It might influence the normal operation of the product if used at the fringe range of normal temperature. Please turn off the power when not in use Do not disassemble the product. Do not shake or stricken the product. Do not use this camera near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool; and the like. Please obey the local government’s environment protection policy

away from exposure to rain or moist, and it shall not be put in or near bath- rooms, washing pools, washhouses, moist basements, or swimming pools. • In use of sockets set on walls or extension wires, attention should be paid not to exceed their load capabilities to avoid inflammation or electric shock; • Casings are not allowed to open, otherwise the internal precision parts may get damaged, or personal injury caused. • Switch off the power supply in thunder and lightning or when not in use for long periods of time. • Do not attempt to service the product yourself as opening or removing cov- ers may expose you to dangerous voltage or other hazards. Refer all serv- icing to qualified service personnel. Important Information The user’s manual provides important information for customers to use their products properly, and avoid possible injuries and damages. Something that should not be done Information about a particular subject A notification or communication of a fact, claim, demand, or proceeding A careful attention to the probable effects of an act, in order that failure or harm may be avoided The condition of being susceptible to harm or injury

where water might splash or where rain- water and mist might erode. *This place might cause fire, shock, short cir- cuit, etc. DO NOT use it on airplanes. Please abide by the airways provision. *It might influence the communication aboard and the flying apparatus if departing from the airways regulation. This will result in accident, possible death and severe physical hurt. DO NOT cover the AC adapter when it is connected to power socket, place the adapter near heaters, and put it on the floor that is equipped with a heater. *The above-mentioned operation might cause fire or incidents. DO NOT plug the AC adapter into the out- let in improper situation. *Plugging AC adapter with wet hand might cause electric shock. Plugging AC adapter unsteadily might cause fire or electric shock. DO NOT put the package plastic bags in reach of children or babies. *It might cause asphyxia if children or babies putting the bags into their mouths.

boring frequency closely at the same time *The electromagnetic wave signal of the neighboring frequency might cause slight interferences and influence the receiving effect. DO NOT touch, shake or hold the aerial. *Touching, shaking or holding the aerial might influence the receiving of electromagnetic wave, and thereby influence the receiving effect. DO NOT place or use the AC adapter on temperature sensitive materials. *The above practice might cause the plastic distortion, fading or sticking on the surface. DO NOT use the receiver on the surface of thermo labile material. *Please embed thermal insulating material when using on the surface of the thermo labile material. DO NOT disassemble or repair the cam- era, the receiver and other relevant periph- eral equipment. *Improper disassembly might cause damages to the product or the peripheral equipment.

avoid impact *The above-mentioned operation will cause explosion DO NOT use the camera in the places that are covered by metal. *Places surrounded by metal, such as eleva- tor and cabinet, might shield the electromag- netic wave resulting in signal lost. DO NOT use the camera in complex envi- ronment. The obstruction of stumbling block will affect the electromagnetic wave and influence the receiving range. *Wall, tree and other stumbling block might absorb, reflect the electromagnetic wave and influence the receiving range. Please adjust the brightness on TV or on monitor to achieve optimum efficiency. *There are slight differences of brightness among cameras which can be adjusted DO NOT let several cameras with same frequency work at the same time. *The overlap of the electromagnetic wave sig- nal of the same frequency might cause severe interferences and unable to receive signals.

14 B) Setting up the Receiver with TV/Monitor 14 C) Setting up the Camera 15 D) Setting up the Receiver to match camera’s frequency 15 E) Adjust the camera’s focal length 16 Specification 17 Troubleshooting 19

of a Color Video Camera with built-in 2.4GHz Video Transmitter, and a Video Receiver unit which you connect to a TV anywhere in your home (up to 100ft. away from the camera). The Camera converts the video and audio signals into radio signals and transmits them to the Video Receiver. The Receiver converts the signals back to video and audio sig- nals which are fed through a cable to your TV’s or VCR’s A/V input jacks. Note: Please read the manual entirely before using the product. Package contents: 1 x Wireless AV Camera (ZT-809T) 1 x Remote Wireless AV Receiver (ZT-707) 1 x AV Cable 1 x 8V power adapter for Camera 1 x 12V power adapter for Receiver 1 x Focus Adjustment Tool 1 x Bracket 1 x 9V Battery Technical Support In U.S.A, please call 1-626-214-2770 or in other areas, E-mail us at: [email protected]

Channel Switch Audio Output Video Output Antenna Power On/Off Switch Power Jack DC 12V A D J U S T F O C U S Antenna 1 ZT-809T CMOS DC8V 2.4GHz NTSC Power Jack Camera Frequency Holes for Focus Adjustment Tool Adjustable lens Bracket Focus Adjustment Tool Camera Back

tions on the adapters are compatible to the devices to avoid potential damages for incorrect usage of power. A / V Cable TV/ Monitor 9V battery or 8V AC adapter CH4 CH3 CH2 CH1 SET To Camera Power Jack 9V Battery Connector (battery included)

Connect the antenna to the receiver. B) Setting up the Receiver with TV/Monitor 1) Connect one end of the A/V cable to the A/V out jacks of the Receiver. Connect the other end to your TV/Monitor A/V jacks. 2) Plug the Receiver’s Power Supply (12V DC Adapter) into any wall out- let and plug its jack into the Receiver. 3) Turn the Receiver power switch on. 4) Position the Receiver in a convenient location such as top of a TV and adjust the antenna. AUDIO VIDEO TV/ Monitor Connect to 12V DC Adapter A/V Cable POWER DC12V AUDIO VIDEO CH4 CH3 CH2 CH1 SET

1) Place the camera at desired location. 2) Plug the power adapter or battery clip jack into the power jack at the back of the camera. 3) Plug the power adapter to any DC outlet or plug a 9V battery to the battery clip. 4) Check the Camera Frequency number of each camera at the back. (The receiver will receive signal from camera’s corresponding fre- quency and display in different channels. For example, Channel 1 on the TV/Monitor will display the picture from Camera 1 only). D) Setting up the Receiver to match camera’s frequency Press the Channel Switch button until the LED channel indicator light match to the camera’s frequency (Camera frequency can be found at the back of the camera). CH4 CH3 CH2 CH1 SET LED channel Indicator Channel Switch

Adjust the camera’s focal length to make the picture more clear. You can also adjust the TV/Monitor brightness, contrast, color to get the best picture. A D J U S T F O C U S Holes for Focus Adjustment Tool Adjustable lens Focus Adjustment Tool

Image Sensor CMOS Total Pixels Horizontal Resolution View Angle Minimum Illumination Video Gain Control Frequency Focus Transmission Power Modulation Mode Bandwidth Microphone Power Supply Consumption Current Operation Temperature Storage Temperature Operation Humidity Dimensions (W x L x H) Weight Mounting Bracket

CH1 = 2,414Mhz CH2 = 2,432Mhz CH3 = 2,450Mhz CH4 = 2,468Mhz Actual transmission range may vary according to weather, location, interfer- ence & building construction. Specifications of Receiver (ZT-707) Receiving Frequency Intermediate Frequency Demodulation Mode Antenna Local Leakage at Input Teminal Receiving Sensitivity Video Output Level Audio Output Level Power Supply Consumption Current Operating Temperature Storage Temperature Operating Humidity Dimensions (WxLxH) Weight

connected to power supplies, and power on. *Check if the channel of receiver is corresponding to camera; *Check the distance and blocks. *Interfered by other sources; *Check the distance and blocks. *Mismatching system of PAL TV and NTSC cameras or vice versa.