Furuno FI-50 Brochure & Specs

Depth/Speed/Temp Sensor DST-800 (Option) 0.9 kg 2.0 lb Junction Box FI-5002 (Option) 0.3 kg 0.7 lb Wind Transducer FI-5001 0.3 kg 0.7 lb FI-5001L 0.4 kg 0.9 lb ø290 ø130 4–ø5 7.5 0.3" 517 20.4" (30 1.2") 237 9.3" 76 3.0" 97 3.8" 372 14.6" 70 2.8" 55 2.2" 40 1.6" 50 2.0" 80 3.1" 2–ø5 52 2.0" 200 7.9" 220 8.7" 84 3.3" ø75 2.94" 124 4.87" 14 0.57" 5 0.19" ø75 2.94" www.furuno.com Port CAN bus ×2 WIND ×1 Depth Current depth Shallow alarm threshold Deep alarm threshold Anchor shallow alarm threshold Anchor deep alarm threshold Speed STW (Speed through water) SOG (Speed over ground) Maximum speed Average speed VMG to windward Log (0 – 99999nm) Trip (0.01 – 999nm) Wind Apparent wind speed Apparent wind angle True wind speed True wind angle Beaufort scale angle Maximum wind speed Maximum true wind speed alarm Low true wind speed alarm High apparent wind angle alarm Low apparent wind angle alarm Ground wind direction Heading Heading Average heading Locked heading Heading on next tack COG (Course over ground) CMG (Course made good) DMG (Distance made good) ROT (Rate of turn) Navigation Bearing to waypoint Distance to waypoint Cross Track Error and error steer bar Target waypoint name Target waypoint number Latitude Longitude GPS satellite status Roll Pitching SOG Environment Battery voltage Battery voltage alarm Date and time Water temperature (two decimal points) Air temperature Pressure Humidity Wind chill temperature Dew point Timer Count up timer Count down timer Autopilot Rudder angle Engine Fuel information Fuel consumption Engine RPM FI-507 0.5 kg 1.1 lb Flush mount Flush mount 111 4.3" ø89 39 1.5" 17 0.7" 10 0.4" 125 4.9" 60 2.4" 194 7.6" 4- ø3.5 183 7.2" 113 4.4" 60 2.4" 173 6.8" 183 7.2" 4- R5 CAN bus connector Surface mount 115 4.5" 42.5 1.7" 51.5 2.0" 175 6.9" 4- ø3.5 145 5.7" 160 6.3" ø89 23 0.9" 26 1.0" 90 3.5" 45 1.8" 60 2.4" ø90 CAN bus connector 108 4.3" 118 4.6" 113 4.4" 60 2.4" 115 4.5" 110 4.3" 49 1.9" 26 1.0" 24 0.9" ø89 2–ø3.5 45 1.8" 44.6 1.8" 60 2.4" ø90 Hole Saw CAN bus connector Wind sensor connector (FI-501/502 only) CAN bus connector Wind sensor connector (FI-501/502 only) Surface mount 125 4.9" 129 5.1" 49 1.9" 10 0.4" 17 0.7" 111 4.4" ø89 Cutout for flush mount Cutout for surface mount Cutout for flush mount Cutout for surface mount (30 1.2") 865 34.1" ø290 7.5 0.3" 55 2.2" 80 3.1" 50 2.0" 40 1.6" 350 13.8" 76 3.0" 210 8.3" 720 28.3" 145 5.7" 70 2.8" ø130 4–ø5 TRADEMARK REGISTERED SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 09025U Printed in Japan Catalogue No. M-1542d FURUNO U.S.A., INC. Camas, Washington, U.S.A. Phone: +1 360-834-9300 Fax: +1 360-834-9400 FURUNO ELECTRIC CO., LTD. Nishinomiya, Hyogo, Japan Phone: +81 (0)798 65-2111 Fax: +81 (0)798 65-4200, 66-4622 FURUNO (UK) LIMITED Havant, Hampshire, U.K. Phone: +44 23 9244 1000 Fax: +44 23 9248 4316 FURUNO FRANCE S.A.S. Bordeaux-Mérignac, France Phone: +33 5 56 13 48 00 Fax: +33 5 56 13 48 01 FURUNO ESPAÑA S.A. Madrid, Spain Phone: +34 91-725-90-88 Fax: +34 91-725-98-97 FURUNO DANMARK AS Hvidovre, Denmark Phone: +45 36 77 45 00 Fax: +45 36 77 45 01 FURUNO NORGE A/S Ålesund, Norway Phone: +47 70 102950 Fax: +47 70 102951 FURUNO SVERIGE AB Västra Frölunda, Sweden Phone: +46 31-7098940 Fax: +46 31-497093 FURUNO FINLAND OY Espoo, Finland Phone: +358 9 4355 670 Fax: +358 9 4355 6710 FURUNO POLSKA Sp. Z o.o. Gdynia, Poland Phone: +48 58 669 02 20 Fax: +48 58 669 02 21 FURUNO DEUTSCHLAND GmbH Rellingen, Germany Phone: +49 4101 838 0 Fax: +49 4101 838 111 FURUNO EURUS LLC St. Petersburg, Russian Federation Phone: +7 812 767 15 92 Fax: +7 812 766 55 52

Data displayed •Apparent and true wind speed •Apparent and true wind angle •Maximum true wind speed •MAX/LOW true wind speed alarm •High/Low apparent wind angle alarm •Beaufort wind speed •VMG to windward The FI-503 displays critical digital navigation data such as depth, speed, temp, and weather data on a 3-way split screen. Data displayed 1 •Current depth •Shallow/deep alarm •Shallow/deep anchor alarm •Wind angle •High/Low apparent wind angle 2 •Boat speed •MAX/AVG STW •SOG •MAX/AVG SOG •VMG to windward •Wind speed •MAX true wind •MAX/LOW true wind speed alarm •Beaufort wind speed 3 •LOG •Trip •Count up/down timer •Water temperature •Air temperature •Air pressure •Humidity •Wind chill temperature •Dew point Apparent and True Wind Angle are displayed in both analog and digital format when connected to the FI-5001/5001L or other CAN bus wind measurement devices. The FI-502 provides detailed and precise wind bearing measurements from 60 Port to 60 Starboard, an important range for Close Hauled (CH) points of sail. The FI-504 and FI-507 feature large digital displays with easy-to-read characters presenting all of the information available in the CAN bus network*. Alternating data display mode switches the user-selected information in 3-second intervals. Data displayed •Displays all information on the FI-50 series* •NAVIGATION (Bearing/distance to WPT, XTE, WPT number/name, L/L, Satellites tracked, Roll & Pitch) •ENVIRONMENT (Battery voltage, Time & Date) •ENGINE (Trip fuel used, Fuel consumption, Engine RPM) * Except ROT. ROT can be displayed on FI-505. The FI-505 provides a digital compass readout with an analog “Off Course” needle that greatly assists the helmsman in maintaining a desired course. When connected to satellite compass, smooth and precise ROT (Rate Of Turn) of the boat is shown with the analog needle. The needle can also be used to verify autopilot steering performance. Data displayed •Current heading •Locked heading •Average heading •Course over ground •ROT When connected to an autopilo the analog FI-506 Rudder Angle Display shows precise rudder angle information. Data displayed •Rudder angle FI-503 FI-504 FI-507 FI-505 FI-506 FI-501 Depth/Speed/Temp Sensor DST-800 Frequency: 235 kHz Cable: 6 m Wind Transducer FI-5001/FI-5001L Power supply: 12 VDC, less than 40 mA Transducer cable: 30/50 m Junction Box FI-5002 CAN bus backbone x 2 ports CAN bus x 6 ports Power supply: 12 VDC, less than 2A FI-502 DIGITAL MULTI / MULTI XL COURSE PILOT RUDDER WIND CH WIND Specifications of FI-50 series Display: Analog and digital LCD (FI-501, 502, 505) Digital LCD (FI-503, 504, 507) Analog (FI-506) Power supply: 12 VDC, less than 0.1 A Temperature: –15°C to +55°C Waterproofing: IP56 1 DIN type 1.5 DIN type FI-5001 FI-5001L and Comfortable Boating sBright backlit displays with wide viewing angles sAuto-Backlighting feature minimizes power consumptio sCAN bus interface offers “Plug and Play” networking sEasy installation with hole-saw flush-mount design sIdeal for mast or bulkhead mounting configurations sWhite face “F1 Style” gauges provide maximum contras and visibility sLatest Organic Light Emitting Diode (OLED) Backlightin Technology reduces power consumption Precision Instrumentation for Safe The FURUNO FI-50 Navigation Instrument Series are professionally designed to meet the needs of all sailing and power boat vessels. These instruments provide a wide variety of precise information, even under the harshest conditions, enhancing your safety at sea. Each easy-to-use display unit utilizes standard CAN bus network connectors and cabling. Data from each component may be fully integrated with any NavNet 3D or other CAN bus system providing an easy “Plug and Play” installation.

•MAX/LOW true wind speed alarm •High/Low apparent wind angle alarm •Beaufort wind speed •VMG to windward The FI-503 displays critical digital navigatio data such as depth, speed, temp, and weather data on a 3-way split screen. Data displayed 1 •Current depth •Shallow/deep alarm •Shallow/deep anchor alarm •Wind angle •High/Low apparent wind angle 2 •Boat speed •MAX/AVG STW •SOG •MAX/AVG SOG •VMG to windward •Wind speed •MAX true wind •MAX/LOW true wind speed alarm •Beaufort wind speed 3 •LOG •Trip •Count up/down timer •Water temperature •Air temperature •Air pressure •Humidity •Wind chill temperature •Dew po Apparent and True Wind Angle are displayed in both analog and digital format when connected to the FI-5001/5001L or other CAN bus wind measurement devices. The FI-502 provides detailed and precise wind bearing measurements from 60 Port to 60 Starboard, an important range for Close Hauled (CH) points of sail. FI-503 FI-501 FI-502 DIGITAL WIND CH WIND Wind Transducer Wind Transducer 12 V Basic Configurations Sail Boat Power Boat System Configurations Wind Transducer 12 V Digital Wind Multi 12 V Depth/Speed/Temp Sensor Depth/Speed/Temp Sensor Depth/Speed/Temp Sensor WAAS/GPS Antenna Wind Multi Multi XL Multi XL Digital Network Radar Sensor Navnet 3D Multi Function Display Wind Transducer Transducer Depth/Speed/Temp Sensor Wind Multi Digital Network Radar Sensor Navnet 3D Multi Function Display Digital Wind CAN bus Ethernet others DFF1 HUB * 12V power supplied from NavNet 3D * 12V power supplied from NavNet 3D Satellite Compass Weather Station Junction Box WAAS/GPS Antenna Junction Box Weather Station

The units are designed to match the NavNet 3D series and other navigation equipment. The “Plug and Play” system utilizes CAN bus interface protocol, which gives the system exceptional interface ability. The FI-50 Series utilize high-contrast, backlit LCD displays for superior viewing even in direct sunlight. Each unit features an easy-to-read display and 4 simple programming buttons for operation. The function for each key and combination are printed directly on the front panel. The FI-50 series of instruments minimize power consumption by turning off the backlight during the daytime. Sensors on the front panel measure ambient lighting conditions and adjust the on/off condition of the display backlighting accordingly. The FI-504 and FI-507 feature large digital displays with easy-to-read characters presenting all of the information available in the CAN bus network*. Alternating data display mode switches the user-selected information in 3-second intervals. Data displayed •Displays all information on the FI-50 series* •NAVIGATION (Bearing/distance to WPT, XTE, WPT number/name, L/L, Satellites tracked, Roll & Pitch) •ENVIRONMENT (Battery voltage, Time & Date) •ENGINE (Trip fuel used, Fuel consumption, Engine RPM) * Except ROT. ROT can be displayed on FI-505. The FI-505 provides a digital compass readout with an analog “Off Course” needle that greatly assists the helmsman in maintaining a desired course. When connected to satellite compass, smooth and precise ROT (Rate Of Turn) of the boat is shown with the analog needle. The needle can also be used to verify autopilot steering performance. Data displayed •Current heading •Locked heading •Average heading •Course over ground •ROT When connected to an autopilot, the analog FI-506 Rudder Angle Display shows precise rudder angle information. Data displayed •Rudder angle FI-504 FI-507 FI-505 FI-506 Depth/Speed/Temp Sensor DST-800 Frequency: 235 kHz Cable: 6 m Wind Transducer FI-5001/FI-5001L Power supply: 12 VDC, less than 40 mA Transducer cable: 30/50 m Junction Box FI-5002 CAN bus backbone x 2 ports CAN bus x 6 ports Power supply: 12 VDC, less than 2A MULTI / MULTI XL COURSE PILOT RUDDER Specifications of FI-50 series Easy to install Easy to Read with Silver Bright LCD Display FI-503 DIGITAL FI-504 MULTI Operational guide description on the front panel 22mm 41mm 22mm Daytime Sunset or after Back Light Turns On Back Light Turns Off Automatic Backlight Adjustment Automatic Detection Display: Analog and digital LCD (FI-501, 502, 505) Digital LCD (FI-503, 504, 507) Analog (FI-506) Power supply: 12 VDC, less than 0.1 A Temperature: –15°C to +55°C Waterproofing: IP56 Surface mount installation Flush mount installation with optional front panel Surface Mount the displays with a hole saw and install 4 screws under the front bezel. Installations are easy and clean with a finished appearance (1"(26mm)bulkhead protrusion) Optional “Low Profile” Flush Mounting front panels provid a cosmetic match to NN3D Displays and a custom console appearance (0.4"(10mm)bulkhead protrusion) 1 DIN type 1.5 DIN type FI-5001 FI-5001L Wind Transducer FI-501 FI-503 JUNCTION BOX MULTI FUNCTION DISPLAY