Sennheiser HME 26 (4) Specification Sheet

for clear speech transmission condenseR microphone Professional headphone with The lightweight headsets in the HME 26 series, with their closed supra-aural design, have been developed for use in radio and television applications. The headphones are dimensioned for particularly high sound pressure levels. The headsets are exceptionally comfortable to wear while providing a high degree of noise attenuation. With all versions in this series, Active- Gard protects the user from extreme volume peaks. The condenser microphone with a cardiod pick-up pattern features excellent acoustic performance, with linear frequency response over a broad frequency range up to 20 kHz. Another important feature is its high feedback rejection. The gooseneck microphone boom can be used on either the left or right side. Both allow users to make exact adjustments to their individual requirements. Lightweight Extremely comfortable to wear due to the two-piece padded headband and soft earpads Single-sided cable Headphones allow for high sound pressure levels ActiveGard™ (can be switched off) Volume peaks above 105 dB are eliminated “Flip-away” headphone allows single-sided listening Pre-polarized condenser microphone (cardioid character) with linear frequency response Flexible microphone boom can be worn on the left or right-hand side Microphone mutes by positioning the microphone boom vertically Cable, microphone boom and earpads can be replaced easily 2 year warranty

high frequencies low frequencies Headphones frequency response Microphone frequency response Far field Near field Technical Data Headphones HME 26-100 (4) HME 26-600 (4) Transducer principle dynamic, closed dynamic, closed Ear coupling supra-aural supra-aural Frequency response 20 – 18,000 Hz 20 – 18,000 Hz Impedance 50 O mono/100 O stereo 300 O mono/600 O stereo THD < 0,5 % at 1 kHz < 0,5 % at 1 kHz Nominal SPL 105 dB SPL at 1 kHz, 1 mW 115 dB SPL at 1 kHz, 1 V (ActiveGard™ switched off) 105 dB SPL at 1 kHz, 1 mW 107 dB SPL at 1 kHz, 1 V (ActiveGard™ switched off) Max. SPL 105 dB SPL at 1 kHz 128 dB SPL at 1 kHz, 200 mW (ActiveGard™ switched off) 105 dB SPL at 1 kHz 127 dB SPL at 1 kHz, 200 mW (ActiveGard™ switched off) Contact pressure approx. 3.6 N approx. 3.6 N Microphone Type BKE 4-4 cardioid BKE 4-4 cardioid Transducer principle pre-polarized condenser microphone pre-polarized condenser microphone Frequency response 40 – 20,000 Hz 40 – 20,000 Hz Output voltage 4 mV/Pa ± 2.5 dB 4 mV/Pa ± 2.5 dB Terminating impedance min. 4,7 kO min. 4,7 kO Supply voltage 5 V – 15 V DC 5 V – 15 V DC General Data Weight without cable approx. 200 g approx. 200 g Packaging Individual package dimensions 194 mm x 84 mm x 249 mm 194 mm x 84 mm x 249 mm Master carton dimensions 512 mm x 252 mm x 382 mm 512 mm x 252 mm x 382 mm Units per master carton 12 12 Languages German, English, French, Italian, Spanish, Dutch, Russian German, English, French, Italian, Spanish, Dutch, Russian Product versions Model Item no. Description Cable, length 2 m HME 26-100 (4) 504203 100 O per system, condenser microphone cardioid – HME 26-600 (4) 504204 600 O per system, condenser microphone cardioid – HME 26-100 502454 100 O per system, condenser microphone omni-directional – HME 26-100-7 502455 100 O per system, condenser microphone omni-directional steel wire cable with open ends HME 26-600 502467 600 O per system, condenser microphone omni-directional – HME 26-600-7 502468 600 O per system, condenser microphone omni-directional steel wire cable with open ends HME 26-600 S 502469 600 O, one side, condenser microphone omni-directional – Model Item no. Description Cable, length 2 m HMD 26-100 502451 100 O per system, dynamic microphone cardioid – HMD 26-100-7 502452 100 O per system, dynamic microphone cardioid steel wire cable with open ends HMD 26-600 502463 600 O per system, dynamic microphone cardioid – HMD 26-600-7 502464 600 O per system, dynamic microphone cardioid steel wire cable with open ends HMD 26-600 S 502465 600 O, one side, dynamic microphone cardioid – HMD 26-600-X3K1 502466 600 O per system, dynamic microphone cardioid steel wire cable with XLR-3 connector and 6.3 mm jack plug HMDC 26-600 502453 NoiseGard™, 600 O per system, dynamic microphone cardioid – HME 26 (4) 538370  03/10  Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com