Universal Remote Control RF10 Owner's Manual

WELCOME CONTNETS The RF10 Remote LOCATION OF CONTROLS Keypad Layout 3 GETTING STARTED Overview 4 Battery Installation 4 Activating Component Commands 5 The SHIFT Button 6 The LIGHT Button 6 BASIC SETUP Overview 7 Pre-Programmed Code Method 7 Pre-Programmed Auto-Search Method 11 Learning Method 13 Transmitting (Busy Signal) Icon 16 Child Lock Feature 16 ADVANCED SETUP Customizing Component Names on the LCD Screen 17 MacroPowerTM Setup 19 SimpleSoundTM Setup & Other ‘Punch Throughs’ 21 AUX Function: Programming an 8th Component 23 Recalling Pre-programmed Setup Code Numbers 25 ERASING COMMANDS Erasing Learned Button, Macro or Favorite Channel Commands 27 Re-setting RF10 to Original Factory Default Settings 33 THE OPTIONAL POWERBLASTERTM PowerBlasterTM 35 PRE- PROGRAMMED CODE TABLES TV 39 CABLE 42 DVD 44 VCR 47 AUDIO 49 SAT 52 CD 54 AUX 56 Pre-Programmed Code Tables 38 COMMAND LOCATIONS Location of commands 58 PRE-PROGRAMMED CODE NOTES Pre-Programmed Code Notes 37 OTHER INFO Frequently Asked Questions 67 Specifications/Warranty 68 Congratulations on purchasing Universal Remote Control’s MASTERCONTROLTM RF10 Pre-programmed and Learning Remote Control! You now have the power to control your entire home entertainment system with one easy-to-use remote. The RF10 can be used with thousands of audio/video Components because of the extensive code library pre-programmed into the remote. And, the RF10’s impressive lineup of special advanced features can automate and customize the operation of your system in many ways. So... get ready to sit back, relax and simplify your home entertainment experience. The Quick Setup DVD Program Guide supplied with the RF10 will assist you in programming your remote by guiding you through an easy step-by-step process. This Owner’s Manual is designed as a companion reference source to the DVD Guide, should you need to refer back to a particular section, or review certain instruction detail not covered in the DVD. However, if you are unable to watch the DVD Guide for some reason, everything you need to know about programming the RF10 is contained in this Manual. Congratulations! MASTERCONTROL™ RF10 Owner’s Manual © 2006 Universal Remote Control, Inc. 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS / OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. MASTERCONTROL, PowerBlaster, MacroPower, and SimpleSound are trademarks of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.

Getting Started-Overview This is what MASTERCONTROL™ RF10 is all about! The RF10 is designed to operate up to 8 different Audio/Video Components and is pre-programmed to operate virtually all brands of TV, VCR, DVD and CD Players, Cable Set Top Boxes, Satellite Receivers, TiVo and other DVRs, Audio Components, Tape Decks, Multimedia PCs, XM Radio, Ipod, X-Box, Lighting Controls and other custom installation products. It also offers an impressive lineup of special features designed to provide you with many time-saving conveniences and enhance your overall entertainment experience. However, we strongly recommend that you fully complete all of the Basic Setup steps before proceeding to customize your RF10 with any of the special advanced features. Battery Installation The very first step is to insert the four AAA batteries that are included in the package into the battery compartment located in the back of the remote. Just press the tab and lift off the cover. Please be sure to insert the batteries correctly as you see in the diagram. Remember, there is a positive and negative end to each battery and you can tell by the + (positive) and – (negative) symbols. Once the batteries are correctly installed, replace the cover. Now you’re ready to start! + + + + - - - -

Press SHIFT to access a second command for each COMPONENT button. While RF10 is in SHIFT mode, the display on the LCD screen will blink. The buttons labeled with white text on the case, indicate just some of the sec- ondary commands available when you are in SHIFT mode. Note: If you don’t press a button within 10 seconds, the RF10 will exit SHIFT mode and return to normal operation. NOTE: The AUDIO COMPONENT has a unique SHIFT functionality. It can send input commands to you’re A/V Surround Sound receiver by pressing the COMPONENT buttons after SHIFT is selected. The LIGHT Button The fully backlit keypad makes the RF10 easy to use in the dark or dim lighting conditions. Simply press the LIGHT button to backlight all the keypad buttons and LCD screen. To turn off the backlight, press the LIGHT button again, or just wait ten seconds (the backlight automatically shuts itself off). Lights out! Try it out! Activating Component Commands – Simple, Easy, Intuitive Once you’ve programmed RF10 for your Components, all you have to do to operate a specific Component is press the desired COMPONENT button. For example, press the TV COMPONENT Button. The top of the screen changes to TV. Now all of the buttons on the RF10 will work your TV. To operate another Component, simply press one of the other eight COMPONENT buttons. TV COMPONENT SHIFT BUTTON LIGHT BUTTON 5 6 Activating Component Commands GETTING STARTED GETTING STARTED SHIFT Button/LIGHT Button

BASIC SETUP BASIC SETUP Pre-Programmed Code Method COMPONENT BUTTON SELECT BUTTON Basic Setup - Overview There are three ways to program the RF10: > The Pre-Programmed Code Method > The Pre-Programmed Auto-Search Method > The Learning Method The Pre-Programmed Code Method allows you to setup all the buttons at once, so it’s the fastest and easiest of the three methods. The Auto-Search Method scans through all the codes in the RF10, one at a time. The Learning Method allows you to transfer functions from other remotes (old or new), one button at a time. Pre-Programmed Code Method STEP 1: The pre-programmed 3-digit codes are found in the back of this Manual on page 38. The codes are listed by Component category (i.e., TV, VCR, DVD, etc.), then by brand name. For instance, if you want to locate a code for a Sony TV, first locate the TV category, and then look for the Sony brand. Once you have located the 3-digit code (or in some cases, several code numbers) for the Component that you want to operate with your RF10, write them ALL down on a piece of note paper. It’s important that you write down all the codes because only one code is going to work for you. STEP 2: Now, turn on the Component you want to program… let’s say your TV to start. Look up your TV’s manufacturer setup code from your reference list. STEP 3: Press and hold the COMPONENT button (in this case TV) and SELECT button at the same time for approximately 3 seconds. The LCD screen will display “SET” signaling that you are now in Setup mode and ready to program your TV. IMPORTANT:You now have 30 seconds to perform the next step while you are in SETUP mode. If you don’t press a button within 30 seconds, SET will disappear from the screen, signaling that you have exited setup mode and you will need to start over.

BASIC SETUP BASIC SETUP Pre-Programmed Code Method NOTE: If the Component fails to turn off after you have entered all the code numbers listed for your brand, you can use either the Auto-Search Method on Page 11 or the Learning Method on Page 13. STEP 4: Point the RF10 toward the Component you want to program, (in this example, TV), and punch in the 3-digit code that you wrote down for that specific Component. Use the Number buttons 0-9 on the remote to punch in the code. If the 3-digit code number that you just punched in is correct, the Component will turn off. If the Component does not turn off, continue entering code numbers from your list until the Component turns off. Some brands have several possible code numbers. STEP 5: When the Component turns off, press the ON button to turn the Component back on. Now you can test the Volume and Channel buttons (for TV), or PLAY and STOP (for VCR and DVD) to make sure they all work. If any of the buttons do not work properly, you need to find a new correct code. For example, maybe your Sony TV turned off with code number 147, but the volume controls did not work properly. If this is the case, try the next code number listed for that Component until you find a perfect match. STEP 6: Once you have found the right code, save the code number by pressing the Component button you just programmed (in this case TV) one more time. The LCD screen will blink “SAVED” two times, signaling that the code number has been successfully saved, and then return to normal operating mode (in this case TV). NOW, PROGRAM THE REST OF YOUR COMPONENTS BY REPEATING STEPS 2 THROUGH 6. IN MOST SYSTEMS, YOU CAN FINISH BASIC SETUP IN JUST A FEW MINUTES AND PUT ALL YOUR OLD REMOTES AWAY. CODE DISPLAY ON BUTTON VOLUME BUTTON STOP BUTTON PLAY BUTTON

BASIC SETUP BASIC SETUP Pre-Programmed Auto-Search Method STEP 1: Turn on the Component you want to program... let’s say your TV to start. STEP 3: Press the UP ARROW Cursor button once. Each time the UP ARROW button is pressed, the code will count up one code number and send a POWER OFF signal. When the correct code is sent out, the component will turn off. sure they all work. If any of the buttons do not work properly, you need to find a new correct code. So, continue pressing the UP ARROW button until you find a code that makes the VOLUME and PLAY buttons work properly. STEP 5: Once you have found the right code, save the code number by pressing the Component button you just programmed (in this case TV) one more time. The LCD screen will blink “SAVED” two times, signaling that the code number has been successfully saved, and then return to normal operating mode. STEP 4: When the Component turns off, press the ON button to turn the Component back on. Now you can test the Volume and Channel buttons (for TV), or PLAY and STOP (for VCR and DVD) to make STEP 2: Press and hold both the COMPONENT (in this case TV) and SELECT buttons for approximately three seconds. The LCD screen will display "SET" signaling that you are now in Setup mode and ready to program your TV. Pre-Programmed Auto-Search Method The Auto-Search Method is a way you can scan through other codes in the table to find the right code for your component. TV COMPONENT SELECT BUTTON UP ARROW BUTTON ON BUTTON IMPORTANT:You now have 30 seconds to perform the next step while you are in SETUP mode. If you don't press a button within 30 seconds, SET will disappear from the screen, signaling that you have exited setup mode and you will need to start over. NOTE: If you can’t find the right code after trying the UP ARROW button for 5 minutes, please try the Learning Method on Page 13.

controls (old or new), one-button-at-a-time, so it will never become obsolete. RF10 is the last remote you’ll ever need! Just follow these simple steps: STEP 1: Line-up the RF10 with the other remote control, head-to-head, one or two inches apart. STEP 2: Press and hold both the desired Component button (in this case TV) and the ENT (Enter) button for approximately 3 seconds. The display on the LCD screen will show LEARN, signaling that you are now in LEARN mode and ready to ‘teach’ your RF10. IMPORTANT:You now have 30 seconds to perform the next step while you are in SETUP mode. If you don’t press a button within 30 seconds, SETUP will disappear from the screen, signaling that you have exited LEARN mode and you will need to start over. STEP 3: Press any button on the RF10 that you want to teach a com- mand to. Once you press a but- ton, the top of the screen display will change from “LEARN” to “READY”. NOTE REGARDING SHIFT FUNCTIONS: You can teach a second additional command to a button by pressing the SHIFT button, then pressing the button you want to teach. Additionally, using the SHIFT button, you may teach commands to the COMPONENT buttons themselves at the AUDIO mode. Simply select the AUDIO component in STEP 2, press SHIFT, and then the component buttons you want to teach. STEP 4: Press and hold the button on the other remote control that you want to ‘teach’ to the RF10 until the LCD display on the RF10 changes to either “GOOD” or “FAIL”. It will then change to “READY”. If the “GOOD” label appears on top of the display, you were successful. Now, continue to teach the RF10 any other commands from your other remotes by repeating STEPS 3 and 4 until the RF10 has learned all the buttons you want. If the “FAIL” label appears on top of the display, try ‘teaching’ the same button to the RF10 once again by repeating STEPS 3 and 4. 13 14 Learning Method BASIC SETUP BASIC SETUP Learning Method

STEP 5: Once you have completed teaching all the button commands to the RF10, save your work and return to normal operation by pressing both the COMPONENT button you pressed in STEP 2 and the ENT (Enter) button at the same time. The remote will respond by flashing SAVED on the display twice, then return to normal operating mode. NOTE: Test all your new commands. If any of them don’t work, try the Learning Method again, following these suggestions: • Move to another room. Plasma TVs, sunlight, halogen or quartz lighting can interfere with the learning process. • Even though the old remote seems to be working fine, put in fresh alkaline batteries. • Gradually vary the distance between the remote controls. Try 1”, 2” and so on, up to 4 feet. • Try tapping the button on your old remote instead of pressing and holding it during the learning process. Some additional Information regarding the Learning Process: • Learned functions override any existing pre-programmed functions on the remote control. • All buttons can be learned except for the PAGE, MAIN and LIGHT buttons. • Learned functions are automatically erased when a new function is learned on the same button. • Learned functions are retained even after a different Setup Code Number is programmed into the remote. • To return to an original pre-programmed function, a learned function must be erased. CHILD LOCK FEATURE This ‘child-lock’ feature prevents the unauthorized use of the remote control by children. It blocks all operations of the remote control. To Activate: Press the +10 and ENT (Enter) buttons simultaneously for 3 seconds. The LCD will blink “LOCK” three times and then display “LOCK”. To Return to Normal Operation: Press the +10 and ENT (Enter) buttons simultaneously again for 3 seconds. The LCD will display the last use mode. Transmitting (Busy Signal) Icon When a command is being transmitted, an icon will appear in the far right side of the LCD screen. This indicates that a signal is being sent.This is particularly useful when setting up Macros, since it flashes with every step of a sequence of commands.

Special Advanced Features Customizing Your RF10 with Special Advanced Features After you’ve finished all your basic setup, you can choose to make operation easier by customizing the RF10 just the way you want, using the Special Advanced Setup Features described in this section. Customizing Component Names on the LCD Screen You can easily edit or change the name of any of the eight COMPONENT buttons on the LCD screen. For example, you can rename AUX to “LIGHTS” or SAT to “DISH”, etc. Here’s how: STEP 1: Press and hold both the COMPONENT button you want to rename and the MENU button at the same time for approximately 3 seconds, until the word “EDIT” is displayed on the LCD screen. This signals that you are now in EDIT mode. IMPORTANT:You now have 30 seconds to perform the next step while you are in EDIT mode. If you don’t press a button within 30 seconds, EDIT will disappear from the screen, signaling that you have exited EDIT mode and you will need to start over. STEP 2: The current COMPONENT name will then appear on the screen, with the first space/character blinking on and off. Change the character by using any of the NUMBER buttons. Each press of the same NUMBER button selects the next character of that number’s group, as shown in the diagram below: STEP 3: Once the character you want appears, move to the next space by pressing the Right ( ) cursor button. Use the Left ( ) cursor button to move the blinking character to the left. Use the Down ( ) cursor button to delete the currently blinking character. STEP 4: When you are finished editing the COMPONENT name, press the COMPONENT button you pressed in STEP 1 to save the changes. The RF10 will respond by flashing “SAVED” twice, then automatically return to normal operating mode. Customizing Y our RF10 with Special Advanced Features

all of your Components ON or OFF, at the same time, simply with the press of one button. We call that a “Macro”. What would normally take multiple remotes and button pushes, the RF10 can accomplish with the press of one button. In addition to the Power ON or OFF buttons, any of the Component buttons can be set to be Macro buttons as well. Feel the power! To setup a Power ON macro button that will turn ON several components at the same time (for example, TV, VCR and CABLE), follow these easy steps: STEP 1: Press and hold both the ON button and the MUTE buttons at the same time for approximately 3 seconds, until the word “MACRO” is displayed on the LCD screen. This signals that you are now in MACRO Setup mode. IMPORTANT:You now have 30 seconds to perform the next step while you are in MACRO mode. If you don’t press a button within 30 seconds, MACRO will disappear from the screen, signaling that you have exited MACRO Setup mode and you will need to start over. STEP 2: Press the first COMPONENT button you want to turn on (in this example, TV) and then confirm the command by pressing the ON button. Repeat this step for all the other components in the order you want them to turn on (in this example, VCR followed by CABLE). The LCD screen changes to the MACRO step display for each command. (NOTE: Whenever a button is pressed, another Macro step is counted and displayed on the screen.) NOTE: Don’t worry about the number of steps. Each macro button can store up to 50 steps, so you are not likely to run out of steps! You can also program delays in between com- mands by pressing the (II) PAUSE button. Each press adds half a second to the delay. STEP 3: Once you have entered all the desired Power On commands, press the CHANNEL ( ) UP button to save your MacroPower commands. The RF10 will respond by flashing “SAVED” twice, then automatically return to normal operating mode. SETTING UP A POWER OFF OR A COMPONENT BUTTON AS MACRO: If you want to program macro commands for the OFF or one of the 8 component buttons, in STEP 1, simply press the button you want to be a macro instead of the ON button. For example, you can setup an AUDIO button to be a macro by pressing AUD (Audio) and MUTE for 3 seconds. Once the screen displays “MACRO”, press the button with the command you want. Then complete and save the Macro by following STEP 3 as outlined above. PROGRAMMING A “PRESS & HOLD” MACRO: Another option for macro buttons is to only send the macro commands if the button is pressed and held. This is setup by entering a delay as the first step of the macro. The amount of delay determines how long the user must press the button before the macro is sent. The advantage of this option is that a normal press of the COMPONENT button will simply switch Components without sending the macro command.

‘Punch Throughs’ ADVANCED SETUP ADVANCED SETUP SimpleSoundTM Setup & Other ‘Punch Throughs’ SimpleSoundTM Setup & Other ‘Punch Throughs’ STEP 1: In a basic home entertainment system, the sound may come from your TV. In a more advanced system, the sound may come from your audio Component such as a Surround Sound Receiver or Home Theatre system. So, first, you need to identify which Component you want to use in your system for sound. STEP 1: In a basic home entertainment system, the sound may come from your TV. In a more advanced system, the sound may come from your audio Component such as a Surround Sound Receiver or Home Theatre system. So, first, you need to identify which Component you want to use in your system for sound. STEP 2: Press and hold both the COMPONENT button you want to add volume control to, such as DVD or VCR, and the SEL (Select) button for approximately 3 seconds, until the word “SET” is displayed on the LCD screen. This signals that you are now in SimpleSound Setup mode. STEP 3: Press the VOL+ button. The screen will alternately blink PUNCH and FROM in the display. Now, let’s setup SimpleSoundTM. Here’s how: STEP 4: Now, press the COMPONENT button for the component that has the Volume control you want (i.e., TV for systems using the TV speakers, AUDIO for systems using Surround Sound receivers). The screen display will flash “SAVED” twice to confirm the command is saved, and the RF10 will automatically return to normal operating mode. This sets up a group of three buttons (Volume Up, Volume Down, and MUTE) in one action! • VOL - Volume Up, Volume Down and Mute • CH - Channel Up, Channel Down, Previous Ch and Channel (0-9) buttons. • PLAY - Play, Stop, Pause, Rewind and Fast Forward • VOD - Menu, Guide, Info, Exit, Up, Down,Left, Right, Select Simply perform the steps above and for step 3, press the first button listed in the group and all buttons will be programmed. STEP 5: Repeat STEPS 2-4 until all your other components (VCR, CABLE, CD, etc.) operate the volume perfectly. SimpleSoundTM is a dynamic feature that gives you total volume control over all the Components in your system, even those without their own built-in volume control, such as TiVo, DVD and VCR... saving you the hassle and inconvenience of constantly needing to switch between Component modes on the remote. With SimpleSoundTM, you can set the RF10’s volume control buttons to always control the sound in your system, even when you’re in VCR or DVD mode, without switching back to AUDIO or TV. Even more exciting, SimpleSound¢‚ is what is called a ‘Punch Through’ feature and is not limited strictly to volume control. Click and enjoy! IMPORTANT: You now have 30 seconds to per- form the next step while you are in Setup mode. If you don’t press a button within 30 seconds, “SET” will disappear from the screen, signaling that you have exited Setup mode and you will need to start over. NOTE: The Punch Through feature is not limited to volume and can also be applied to other groups of buttons and functions. If you find yourself switching to a particular component frequently to use a group of controls, consider using Punch Through for another group, as listed here:

ADVANCED SETUP AUX Function: Programming an 8th Component ADVANCED SETUP AUX Function: Programming an 8th Component STEP 1: Turn on the component you wish to setup (a second TV for example). STEP 2: Press and hold both the AUX and SEL (Select) buttons at the same time for approximately 3 seconds, until the word “SET” displays on the LCD screen. STEP 3: Press the component button you want to setup (in this case TV). Channel buttons (for TV), or PLAY and STOP (for VCR and DVD) to make sure they all work. If any of the buttons do not work properly, you need to find a new correct code. For example, maybe your Sony TV turned off with code number 147, but the volume con- trols did not work properly. If this is the case, try the next code number listed for that Component until you find a perfect match. STEP 4: Point the RF10 toward the Component you want to program, (in this example, TV), and punch in the 3-digit code that you wrote down for that specific Component. Use the Number buttons 0-9 on the remote to punch in the code. If the 3-digit code number that you just punched in is correct, the Component will turn off. If the Component does not turn off, continue entering code numbers from your list until the Component turns off. Some brands have several possible code numbers. STEP 6: Once you have found the right code, save the code number by pressing the Component button you pressed in STEP 2 (in this case AUX) one more time. The LCD screen will blink "SAVED" two times, signaling that the code number has been successfully saved, and then return to normal operating mode. STEP 5: When the Component turns off, press the ON button to turn the Component back on. Now you can test the Volume and After you’ve finished customizing the RF10’s programming for seven primary components, and you did not use AUX, you can take advantage of the AUX function to program an 8th component, such as a second TV, VCR, or any other audio/video component that you may have in your system. AUX BUTTON NUMBER BUTTONS NOTE: Any component button can be setup to operate any type of component by following these same steps. Simply substitute the desired component button in place of AUX in STEP 2. IMPORTANT: You now have 30 seconds to perform the next step while you are in Setup mode. If you don’t press a button within 30 seconds, ”SET” will disappear from the screen, signaling that you have exited Setup mode and you will need to start over.

ADVANCED SETUP ADVANCED SETUP Recalling Pre-Programmed Setup Code Numbers In case you didn’t write down the Pre-Programmed Code Numbers that you used to setup your RF10, you can easily recall them using this simple process: STEP 1: Press and hold both the COMPONENT you want to iden- tify and the SEL (Select) buttons at the same time for approximately 3 seconds, until the word “SET” is displayed on the LCD screen. This signals that you are now in setup mode. IMPORTANT:You now have 30 seconds to perform the next step while you are in SETUP mode. If you don’t press a button within 30 seconds, SETUP will disappear from the screen, signaling that you have exited setup mode and you will need to start over. STEP 2: Press the INFO button. The name of the selected component will blink twice on the LCD screen, followed by the 3-digit code. Write down the code numbers as they appear for future reference. Pages 37 of this manual provides a convenient space for you to record your code numbers. The RF10 will then automatically return to normal operating mode.

ERASING COMMANDS ERASING COMMANDS Erasing Commands Erasing Commands – Overview You can erase a single command, all learned commands in each component mode, SimpleSound™commands or MacroPower™commands. If you really want a fresh start, it is possible to reset the RF10 to its original factory default settings. Erasing One Learned Command STEP 1: Press and hold both the COMPONENT button where the command is stored and the ENT (Enter) button at the same time for approximately 3 seconds, until the word “LEARN” is displayed on the LCD screen. IMPORTANT:You now have 30 seconds to perform the next step while you are in LEARN mode. If you don’t press a button within 30 seconds, LEARN will disappear from the screen, signaling that you have exited erase mode and you will need to start over. STEP 2: Press and hold the button you want to erase for 2 seconds. The display will flash ERASE twice, then display LEARN. Repeat this step to erase any other buttons in the same mode. STEP 3: To save, press and hold the COMPONENT button and the ENT button until the word “SAVED” flashes twice on the LCD screen. The RF10 will then automatically return to normal operating mode. ENT BUTTONS COMPONENT BUTTON COMPONENT BUTTONS ENT BUTTON

STEP 1: Press and hold both the COMPONENT button where the command is stored and the ENT (Enter) button at the same time for approximately 3 seconds, until the word “LEARN” is displayed on the LCD screen. IMPORTANT:You now have 30 seconds to perform the next step while you are in LEARN mode. If you don’t press a button within 30 seconds, LEARN will disappear from the screen, signaling that you have exited erase mode and you will need to start over. STEP 2: Press and hold both the COMPONENT button you want to erase and the PAUSE button until the display flashes ERASE eight times, followed by SAVED. Release the buttons and the RF10 will then automatically return to normal operating mode.

Erasing Macro Commands STEP 1: Press and hold both the POWER ON and the STOP buttons for 10 seconds, until the display flashes ERASE ten times STEP 2: Release the buttons and the display will flash SAVED twice and the RF10 will automatically return to normal operating mode STEP 1: Press and hold one of the MACRO buttons (ON, OFF or one of the 8 COMPONENT buttons) and the MUTE button, until the word “MACRO” is displayed on the LCD screen. IMPORTANT: You now have 30 seconds to perform the next step while you are in MACRO mode. If you don’t press a button within 30 seconds, MACRO will disappear from the screen, signaling that you have exited erase mode and you will need to start over. STEP 2: Press the CHANNEL ( ) UP button to save. The display will flash CLEAR and then SAVED two times. STOP BUTTON POWER ON BUTTON MACRO BUTTONS

Factory Default Settings ERASING COMMANDS ERASING COMMANDS Re-setting RF10 to Original Factory Default Settings If you want to start with a clean slate, you can re-set the RF10 its original factory default settings by performing the following steps. STEP 1: Press and hold both the POWER OFF button and the STOP button for 10 seconds. Continue to hold both buttons as the display flashes ERASE ten times, then RESET. The RF10 will then display a self-testing routine for a few seconds, then automatically return to normal operating mode. NOTE: This process will essentially erase EVERYTHING you have programmed into the RF10. STOP BUTTON POWER OFF BUTTON

POWERBLASTERTM POWERBLASTERTM The Optional PowerBlasterTM The Optional PowerBlaster™ (for ‘barrier-free’ RF control) [Sold separately] Of all the fabulous RF10 features, this is probably the most exciting. When used in combination with the optional PowerBlaster™, the RF10 becomes an amazing remote control powerhouse that sends multi-directional RF (Radio Frequency) signals that pass through walls, doors and floors – both indoors and outdoors. This changes everything! It enables you to control Components that are completely out-of-sight, up to 100’ away. The PowerBlaster™ picks up RF10’s radio frequency signals from any direction, regardless of distance, so RF10 doesn’t need to be pointed directly at any Component. Just imagine – no more pointing! Now you can close your entertainment center doors, hide your Components, and still control them with ease. Control outdoor speakers on your patio. Control your Components anywhere! One of the best things about this is — nothing has to be done to the RF10 for this feature to work. Every time you press a button on the RF10, it sends both a standard IR (Infrared Command) AND an RF (Radio Frequency) signal. If you install the PowerBlaster™ kit, it will automatically receive RF10’s radio signals and translate them into the infrared commands that control your Components. NOTE:The RF10's radio signals will not control Components directly.You must have a PowerBlaster™ to receive the RF10's radio signals. Components that came with "no pointing" radio remote controls cannot be operated by the RF10 unless the Component can be switched to standard IR (Infrared Control) via its internal menus. Some remote control ceiling fans are radio only and cannot be operated by the RF10. The RF10 sends radio signal to the PowerBlaster™, which is a radio receiver. The PowerBlaster™ converts radio signals to standard infrared commands and sends them out via a built-in front blaster to Components in the same cabinet space. Self-adhesive “flashers” (included in the PowerBlaster™ kit) affix to the front panels of your Components. The flash- ers relay infrared commands to Components out-of-sight of the PowerBlaster’s front blaster. The flashers plug into PowerBlaster’s rear flasher line output jacks. Each flasher has a 10’ cable to easily reach Components on nearby shelves.

Record the three digit codes for your system here: Pre-Programmed Code Tables The RF10's Pre-Programmed code library is divided into categories (TV, VCR, AUX, etc.). Each category actually includes many types of Components. For example, the VCR category includes TV/VCR combo units. Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three digit code for you to try. Just circle the correct row and refer to it while you setup (step by step instructions for using Pre-Programmed codes are found on page 7). TV TVs, Plasmas, Projectors and Monitors CABLE Cable TVs and Web TVs DVD DVD Players and TV/DVD Combos VCR VCRs and TV/VCR Combos AUDIO Amps, Preamps, A/V Receivers and XM Radios SAT Satellite Receivers, TiVo, Replay and other DVR’s CD CD Players and CD Changers AUX Tape Decks, Lighting Controls, Multimedia PCs, Xbox, iPod and Custom Installation Products NOTE: Following the Code Tables are Command Locators. Use the Command Locators to locate the additional commands that are accessed via the SHIFT button. AUDIO DVD CD SAT TV VCR CABLE AUX LIGHT TAPE PHONO TV2 VCR2 DVR LDP XM RADIO IPOD X-BOX Pre-Programmed Code Notes PRE-PROGRAMMED CODE NOTES Pre-Programmed Code Tables PRE-PROGRAMMED CODE TABLES

LG 113 116 102 004 106 112 119 127 143 243 284 363 365 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 004 LXI 166 007 015 052 081 160 164 MAGNAVOX 164 059 197 003 060 061 004 063 064 127 022 160 094 239 226 273 MARANTZ 197 164 184 MATSUI 164 MAXENT 242 MEMOREX 007 072 004 METZ 088 MGA 197 004 024 028 042 MINERVA 088 MITSUBISHI 109 124 024 004 028 040 042 146 191 MTC 197 004 062 101 NAD 015 025 NEC 132 130 134 197 040 016 024 056 019 236 237 262 272 NIKEI 043 NUVISION 351 ONKING 043 ONWA 043 OPTOMA 265 270 OPTONICA 019 081 ORION 096 PANASONIC 034 056 080 092 164 208 PHILCO 197 003 059 060 064 164 004 024 056 063 PHILIPS 164 005 093 038 197 003 004 059 127 184 206 239 259 PIONEER 135 025 197 018 023 116 190 234 335 POLAROID 138 268 328 353 354 356 388 PORTLAND 004 143 PROSCAN 144 160 161 165 167 PROTON 004 131 058 143 171 173 193 QUASAR 034 056 092 RADIO SHACK 019 004 143 043 127 RCA 160 165 065 156 144 161 197 004 024 056 152 023 074 333 REALISTIC 007 019 043 047 ROCTEC 186 RUNCO 168 169 178 179 180 181 182 183 073 157 340 SAMPO 197 058 004 202 SAMSUNG 050 089 101 105 004 127 143 160 228 229 258 SANYO 166 007 020 053 057 082 187 SCEPTRE 276 SCOTT 028 043 004 048 143 SEARS 015 030 004 007 028 057 143 094 160 082 165 166 SELECO 189 200 205 227 SHARP 081 019 014 170 028 029 004 022 143 175 251 SIEMENS 088 SIM2 189 200 205 227 SIGNATURE 072 SOLE 231 232 SONY 070 139 147 126 185 194 085 213 277 279 SOUNDESIGN 028 004 003 043 SPECTRICON 112 SSS 004 043 ADMIRAL 072 081 161 160 ADVENT 247 AKAI 197 146 248 A MARK 112 143 AMPRO 167 073 157 183 AMSTRAD 052 ANAM 043 054 056 080 112 131 AOC 197 004 112 058 APEX DIGITAL 006 310 AUDIOVOX 076 273 BARCO 233 BLAUPUNKT 088 BROKSONIC 238 CAIRN 201 CANDLE 197 002 003 004 CAPEHART 058 CETRONIC 043 CITIZEN 197 002 003 004 043 101 103 143 CLASSIC 043 CONCERTO 004 CONTEC 043 050 051 CORONADO 143 CRAIG 043 054 CROWN 043 143 CURTIS MATHES 197 101 004 143 CXC 043 DAEWOO 004 016 043 044 076 103 114 125 127 143 DAYTRON 004 143 DELL 319 320 321 DREAMVISION 235 345 DWIN 177 257 DYNASTY 043 DYNATECH 062 EIKI 187 ELECTROHOME 143 024 076 196 EMERSON 028 048 043 155 005 197 004 047 050 051 076 096 143 151 153 154 EPSON 324 ESA 323 FISHER 007 057 FUJITSU 198 246 346 FUNAI 028 043 FUTURETECH 043 GATEWAY 242 268 GE 160 144 165 073 197 008 009 034 056 074 130 155 161 004 091 157 183 GOLDSTAR 113 116 102 004 106 112 119 127 143 HALL MARK 004 HANNSPREE 381 HITACHI 011 163 166 004 009 010 012 023 075 143 158 072 HP 316 327 378 HYUNDAI 337 338 INFINITY 164 INFOCUS 230 330 333 INSIGNIA 350 JBL 164 JCPENNEY 004 024 197 008 009 030 065 101 143 156 160 JENSEN 013 JVC 038 034 070 083 145 199 210 240 241 KEC 043

SYNTAX OLEVIA 376 TANDY 081 TATUNG 056 062 TECHNICS 034 080 TECHWOOD 004 TEKNIKA 002 003 004 024 028 043 072 101 143 TELEFUNKEN 037 046 086 087 TELERENT 072 TERA 172 TMK 004 TOSHIBA 015 138 030 007 040 062 101 325 TOTEVISION 143 UNIVERSAL 008 009 VIDEO CONCEPTS 146 VIDIKRON 174 184 188 192 340 VIDTECH 004 VIZIO 386 387 VIEWSONIC 242 WARDS 004 008 009 019 028 060 061 063 064 072 074 143 164 034 WESTING HOUSE 076 280 WINBOOK 339 YAMAHA 197 004 YORK 004 YUPITERU 043 ZENITH 073 072 095 103 157 183 243 284 ZONDA 112 ABC 004 103 003 039 042 046 053 ADELPHIA 043 074 ADVANCED NEWHOUSE 043 ALTRIO 043 AMERICAST 099 ARCHER 005 007 014 ARMSTONG 074 AT&T BROADBAND 074 ATLANTIC BROADBAND 043 074 BELL SOUTH 099 BLUE RIDGE 043 074 BRESNAN 074 BRIGHT HOUSE 043 110 BUCKEYE COMM 074 CABLEVISION 043 074 108 CENTURION 092 CENTURY 007 CHARTER 043 074 CITIZEN 007 COGECO 074 COMBANO 080 081 COMCAST 043 074 110 COMSAT 074 COX DIGITAL 043 074 DIGICABLE 101 EAGLE 020 030 040 EASTERN 057 066 ECHOSTAR 106 ELECTRICORD 032 GEMINI 008 054 GENERAL ELECTRIC 072 GENERAL INSTRUMENT 074 103 104 GNC 099 GOLDEN CHANNEL 030 HAMLIN 049 050 055 HITACHI 103 055 INSIGHT 074 JERROLD 074 004 103 002 003 008 009 010 069 MAGNAVOX 010 012 064 079 095 094 MASSILLON 074 MEDIA ONE 107 MEDICOM 074 MEMOREX 052 MITSUBISHI 102 MOTOROLA 074 110 109 111 MOVIE TIME 028 032 MOXI 111 NCTC 074 NSC 015 028 038 071 OAK 031 037 053 PACE 043 074 PANASONIC 044 047 PARAGON 052 PHILIPS 006 012 013 020 085 095 PIONEER 043 103 034 051 063 076 105 PRUCER 059 PULSAR 052 RCA 047 RCN 074 RECOTON 098 CABLE/WEBTV

SEREN 043 SERVICE ELECTRIC 074 SHAW 074 SIGECOM 043 SONY 096 108 SPRUCER 047 078 STARCOM 002 004 008 009 STARGATE 008 030 097 104 SUSQUEHANNA 043 074 TIME WARNER 043 074 TOCOM 039 040 056 TOSHIBA 052 UNITED CABLE 004 053 UNIVERSAL 005 007 014 032 035 VIDEOTRON 043 VIEWSTAR 012 015 018 086 087 088 089 WIDE OPEN WEST 043 099 ZENITH 052 060 093 100 AIWA 146 ALPINE 098 APEX DIGITAL 087 111 115 112 116 ARCAM 122 CAMBRIDGE AUDIO 215 CARY AUDIO DESIGN 174 CLASSE 167 COBY 258 DENON 007 080 173 FUNAI 143 GATEWAT 175 GE 026 027 GOVIDEO 137 218 220 221 222 HARMAN KARDON 084 140 HITACHI 101 ILO 268 INTEGRA 142 180 JVC 012 KENWOOD 151 KLH 135 KISS 179 279 KRELL 104 LEXICON 148 LG 091 057 074 LITEON 264 265 MAGNAVOX 066 096 MALATA 267 MARANTZ 083 095 MERIDIAN 153 MITSUBISHI 017 MYRYAD 102 134 NAD 088 155 NAKAMICHI 103 ONKYO 076 035 180 OPPO 266 PANASONIC 021 042 138 139 144 150 PHILIPS 066 083 095 105 166 PIONEER 023 092 099 107 108 131 POLAROID 233 234 237 PRIMARE 193 194 PROCEED 086 PROSCAN 026 027 RCA 026 027 RJTECH 269 ROTEL 204 SAMSUNG 056 070 119 165 170 137 159 SANSUI 154 SANYO 147 SENSORY SCIENCE 222 223 SHARP 094 SONY 033 118 145 126 191 SYLVANIA 143 SYMPHONIC 143 TAG MCLAREN 156 TATUNG 102 TEAC 270 THOMPSON 026 027 THULE 177 TOSHIBA 035 034 130 141 164 188 VENTURER 149 DVD

ZENITH 057 074 091 DVD-TV/DVD Combos AIWA 146 FUNAI 143 SAMSUNG 165 SYLVANIA 143 SYMPHONIC 143 TOSHIBA 130 DVD-TV/DVD/VCR Combos MAGNAVOX 143 PANASONIC 144 SYLVANIA 143 TOSHIBA 164 DVD-DVD/VCR Combos GO VIDEO 137 218 PANASONIC 150 PHILIPS 105 (VCR Functions for VCR 067) POLAROID 234 SAMSUNG 137 159 SANSUI 154 SONY 145 191 TOSHIBA 141 ZENITH 091 (VCR Functions for VCR171) DVD-DVD Recorder GATEWAY 175 GO VIDEO 220 221 222 ILO 268 KISS 279 LITEON 265 PANASONIC 139 SENSORY SCIENCE 222 SONY 191 TOSHIBA 188 DVD-LD DENON 206 207 FUNAI 120 KENWOOD 152 013 MAGNAVOX 032 121 MARANTZ 211 MITSUBISHI 121 NAD 121 OPTIMUS 049 013 PANASONIC 113 PHILIPS 032 PIONEER 106 117 121 RADIO SHACK 120 RCA 002 REALISTIC 049 RUNCO 127 SANYO 075 SHARP 152 013 SONY 053 110 TECHNICS 113 THETA DIGITAL 032 TOSHIBA 152 106 YAMAHA 043 129 DVD

AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 023 039 043 BROOKSONIC 035 037 129 CANON 028 031 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 041 DAEWOO 111 116 117 119 005 007 010 065 108 110 112 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 EMERSON 006 029 035 017 025 027 031 034 036 037 046 101 129 131 138 153 162 116 FISHER 003 010 008 009 FUNAI 034 GE 031 072 147 063 107 109 144 GO VIDEO 132 136 155 040 115 GOLDSTAR 101 106 114 013 020 012 123 HARMAN KARDON 012 045 HITACHI 004 026 150 018 034 043 063 137 160 013 INSTANTREPLAY 031 JCL 031 JCPENNEY 012 013 015 040 066 101 JENSEN 043 JVC 048 043 130 150 055 060 012 031 050 152 166 KENWOOD 014 048 034 047 LG 101 106 114 013 020 012 123 LLOYD 034 LXI 034 003 009 017 106 MAGIN 040 MAGNAVOX 067 031 034 068 041 156 164 MARANTZ 067 069 012 031 156 MARTA 101 MATSUI 027 030 MEI 031 MEMOREX 101 003 010 014 031 034 053 072 102 134 139 MGA 045 046 059 MINOLTA 013 020 MITSUBISHI 059 061 151 013 020 045 046 051 142 049 168 MTC 034 040 MULTITECH 024 034 NEC 012 023 039 043 048 NORDMENDE 043 OPTONICA 053 054 ORION 025 PANASONIC 066 070 145 083 133 140 157 163 074 167 PENTAX 013 020 031 063 PHILCO 031 034 067 PHILIPS 031 067 034 101 054 071 156 PILOT 101 PIONEER 021 013 048 PORTLAND 108 PULSAR 072 QUARTZ 002 014 QUASAR 066 145 075 RADIO SHACK 123 RCA 107 109 144 147 158 041 145 013 020 140 034 040 REALISTIC 003 008 010 014 031 034 040 053 054 101 RICO 058 RUNCO 148 SALORA 014 SAMSUNG 102 104 113 115 112 120 032 040 066 107 109 122 125 SANSUI 022 043 048 135 SANYO 003 010 007 014 134 102 SCOTT 017 037 112 129 131 SEARS 003 008 010 014 081 013 101 009 017 073 112 SHARP 149 054 031 159 165 SHINTOM 024 SIGNATURE 034 SONY 056 057 058 077 052 003 078 076 031 149 154 SOUNDESIGN 034 STS 013 SYLVANIA 031 034 059 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 TEAC 034 039 043 TECHNICS 031 070 TEKNIKA 031 019 034 101 THOMAS 034 TMK 006 TOSHIBA 112 131 079 008 059 047 082 013 042 081 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 141 VIDEOSONIC 040 WARDS 003 013 017 024 031 034 040 053 054 131 YAMAHA 012 034 039 043 ZENITH 072 080 056 048 101 034 058 VCR-TV/VCR Combos DAEWOO 005 117 EMERSON 153 FUNAI 034 GOLDSTAR 101 123 HITACHI 034 JCPENNEY 101 LG 101 123 LLOYD 034 MAGNAVOX 034 067 MEMOREX 101 PANASONIC 070 167 PHILIPS 034 067 RADIO SHACK 123 RCA 034 SEARS 101 SONY 057 154 SYLVANIA 067 SYMPHONIC 034 THOMAS 034 ZENITH 034 VCR

AIWA 170 018 104 202 203 213 211 188 AKAI 138 189 AMC 125 126 127 128 258 281 282 038 AMEND 054 AMX 196 ANGSTROM 142 ANTHEM 335 336 337 338 339 ARCAM 141 418 419 ATLANTIC TECHNOLOGY 342 AUDIO ACCESS 147 AUDIO ALCHEMY 135 AUDIO DESIGN 194 221 011 AUDIO EASE 021 196 207 AUDIO FILE 071 AUDIO MATRIX 167 AUDIO SOURCE 273 AUDIO TECHNICA 134 B & K 096 097 BOSE 070 170 224 347 409 459 460 532 BOSTON ACOUSTICS 447 BRYSTON 023 CAMBRIDGE AUDIO 522 CARVER 006 028 061 071 201 214 226 180 185 022 029 077 284 CASIO 076 CHIRO 140 CINEMA SOUND 034 134 CITATION 148 272 CLARION 026 CLASSE 537 COMPAQ 382 CURTIS MATHES 076 DELPHI 415 515 DENON 002 034 109 215 229 230 027 037 234 259 330 340 341 349 350 400 401 402 444 564 EAD 466 EIGER 149 ELAN 057 290 ENLIGHTENED AUDIO 099 098 ESCIENT 368 381 451 452 453 454 FANFARE 352 FISHER 047 214 180 182 297 FLEXTRONICS 378 FOSGATE 062 231 FOSGATE AUDIONICS 342 GE 056 260 GOLDSTAR 008 HAFLER 174 HARMAN KARDON 231 233 254 153 154 118 121 227 277 317 318 365 HITACHI 020 IMERGE 371 INKEL 197 INTEGRA 354 438 JAMO 398 JBL 263 JCPENNEY 076 216 JEFF ROWLAND 206 JENSEN 058 JVC 240 163 191 114 266 279 291 KENWOOD 026 066 145 146 181 190 197 192 182 199 151 222 180 005 280 374 550 KINERGETICS 220 140 KLH 331 KOSS 216 573 KRELL 150 072 376 384 KYOCERA 007 LEXICON 120 235 236 237 357 358 359 360 361 362 363 364 LINN 124 377 LUXMAN 137 139 052 165 115 004 009 LXI 076 056 MAGNAVOX 086 164 152 208 MARANTZ 006 028 031 040 063 185 186 251 265 119 289 296 492 MCINTOSH 238 286 MCS 076 MERIDIAN 100 012 013 MITSUBISHI 242 243 204 MONDIAL 157 158 042 043 081 112 MYRYAD 276 293 NAD 186 113 283 478 479 NAKAMICHI 111 244 245 172 183 287 NEC 176 NILES 403 NIRO 343 ONKYO 017 046 064 107 108 187 079 080 090 179 209 270 275 438 OPTIMUS 026 041 138 OUTLAW 342 PANASONIC 032 195 219 177 292 383 516 PARASOUND 129 130 132 261 294 295 333 334 PHAST 196 PHILIPS 249 250 251 063 119 PIONEER 014 033 039 044 045 050 069 159 168 116 035 078 198 480 POLKAUDIO 029 515 PRIMARE 464 PROCEED 144 268 RCA 010 048 117 156 067 288 REALISTIC 019 056 073 075 095 REQUEST 351 REVOX 162 ROTEL 074 083 085 RUSSOUND 379 391 392 SAMSUNG 016 571 SANSUI 040 048 110 119 065 228 SANYO 047 059 SCOTT 019 091 SEARS 076 SHARP 026 094 131 175 181 SHERWOOD 024 038 055 102 103 105 106 051 030 447 SONY 018 093 223 247 248 160 166 015 101 184 218 271 353 369 372 380 417 421 SOUNDESIGN 036 SOUNDMATTERS 375 SOUNDSTREAM 084 088 SSI 068 SUMO 171 SUNFIRE 344 345 346 494 TAEKWANG 138 TEAC 005 019 049 111 212 217 TECHNICS 122 176 193 219 178 177 200 257 262 THETA DIGITAL 136

WARDS 180 YAMAHA 026 253 169 067 173 205 264 232 089 264 274 285 332 373 432 433 ZENITH 143 210 AUDIO-XM Radios & Tuners BOSE 170 532 DELPHI 415 515 FANFARE 352 KENWOOD 550 POLKAUDIO 515 SONY 380 ALPHASTAR 123 AMPLICA 050 BIRDVIEW 129 113 051 126 BSR 053 CABLEVISION / VOOM 148 CAPETRONICS 053 CHANNEL MASTER 013 014 015 018 036 055 CHAPARRAL 008 009 012 077 CITOH 054 CURTIS MATHES 050 DIRECTV 173 DRAKE 005 006 007 010 011 112 116 141 052 DX ANTENNA 056 024 046 076 ECHOSTAR / DISH 122 038 040 057 058 093 094 095 096 097 098 099 100 167 168 ELECTROHOME 089 EUROSAT 114 EXPRESSVU 122 FUJITSU 017 021 022 027 133 134 GENERAL ELECTRIC 151 106 150 GENERAL INSTRUMENT 003 004 016 029 031 059 101 148 GOI 122 HITACHI 139 140 HOME CABLE 080 044 029 HOUSTON TRACKER 033 037 039 104 057 051 HTS 122 HUGHES 161 162 068 154 165 166 HYTEK 053 HYUNDAI 149 ICR 023 JANIEL 147 JVC 122 KATHREIN 108 LEGEND 057 LG 170 LUTRON 132 LUXOR 144 062 MACOM 059 010 063 064 065 MAGNAVOX 136 MARANTZ 152 153 MEMOREX 057 136 MITSUBISHI 068 154 MOTOROLA 148 NEXT LEVEL 148 NEXTWAVE 028 124 125 NORSAT 069 070 PACE 143 PANASONIC 142 160 PANSAT 121 172 PAYSAT 136 PERSONAL CABLE 117 PHILIPS 152 153 156 068 154 136 PL 023 026 PRESIDENT 019 102 PRIMESTAR 110 030 PROSAT 072 PROSCAN 151 106 150 RADIOSHACK 148 RCA 151 106 150 REALISTIC 043 074 SAT

SATELLITE SERVICE 028 035 047 085 SKY 164 SONY 103 STARCAST 041 STAR CHOICE 148 SUPERGUIDE 020 124 125 TEECOM 023 026 075 087 088 090 107 130 137 TOSHIBA 127 068 154 157 158 TOWN & COUNTRY 023 026 UNIDEN 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 VIEWSTAR 115 WINEGARD 128 146 ZENITH 159 SAT-DVR, TIVO DISH 122 ECHOSTAR 122 HUGHES 205 207 JVC 122 PHILIPS 205 202 207 RCA 206 REPLAY NETWORKS 201 SONY 203 204 TIVO 202 207 TOSHIBA 207 ADCOM 062 042 AIWA 059 065 088 089 105 122 170 187 AKAI 085 195 202 AMC 231 232 AMEND 118 ARCAM 238 AUDIO ACCESS 119 147 AUDIO EASE 165 AUDIO TECHNICA 046 BSR 037 057 CALIFORNIA AUDIO 103 008 CAPETRONIC 063 CARRERA 057 080 CARVER 185 041 044 050 086 107 130 134 135 138 139 203 204 167 CASIO 111 182 CLARINETTE 182 CREEK 159 CROWN 035 DENON 002 123 EMERSON 042 069 102 FISHER 050 185 134 008 FRABA 111 GENEXXA 010 069 102 GOLDSTAR 080 HAITAI 093 HARMAN KARDON 018 033 047 208 HITACHI 042 175 INKEL 130 143 144 JCPENNEY 014 061 092 141 JENSEN 158 JVC 004 022 136 163 213 214 242 243 KENWOOD 185 007 023 055 071 072 142 137 254 KOSS 061 KRELL 241 KYOCERA 005 LOTTE 102 LUXMAN 011 028 070 076 249 252 LXI 059 MAGNAVOX 044 107 MARANTZ 027 041 044 051 077 107 209 246 MCINTOSH 212 247 MCS 014 073 092 MEMOREX 010 MISSION 044 107 MITSUBISHI 179 MITSUMI 153 MODULAIRE 182 MONDIAL 147 MYRYAD 244 155 NAD 006 005 067 178 NAKAMICHI 217 218 219 095 NEC 014 062 NIKKO 046 NSM 044 107 ONKYO 030 038 039 168 169 OPTIMUS 010 050 057 058 081 082 083 085 093 195 PANASONIC 103 201 172 008 068 248 PARASOUND 233 240 PHILIPS 041 044 107 246 253 PIONEER 010 020 025 056 174 175 176

QUASAR 103 008 RADIO SHACK 182 RCA 017 042 150 REALISTIC 042 050 051 102 181 182 187 ROTEL 044 107 161 178 250 SAE 044 107 SANSUI 044 069 107 128 171 190 125 SANYO 050 SCOTT 069 102 SHARP 026 031 051 066 SHERWOOD 003 019 051 096 112 115 119 166 SIGNATURE 033 SONY 048 081 097 126 133 177 225 226 164 SOUNDESIGN 251 SUMO 155 SYLVANIA 044 107 SYMPHONIC 052 181 TAEKWANG 195 085 TANDY 010 TEAC 015 034 036 051 052 101 131 140 079 TECHNICS 060 103 200 172 184 008 068 TECHWOOD 076 THETA DIGITAL 234 235 TOSHIBA 006 067 091 160 148 VECTOR RESEARCH 080 VICTOR 004 022 114 124 WARDS 185 033 YAMAHA 024 046 054 186 183 245 YORX 182 3M 152 AIWA 164 APPLE/iPod 401 ARCHER 155 AURORA MULTIMEDIA 220 AUTON 191 BOSE 409 CELADON 221 CRESTRON 213 214 215 216 217 218 DELL 261 262 DMX 156 DRAPER SCREEN 204 DREAMVISION 097 DWIN 080 253 EVERQUEST 206 EXTRON 151 FAROUDJA 184 FUJI 209 GATEWAY 261 262 HAUPPAUGE 294 295 HP 261 262 HUNTERDOUGLAS 219 JERROLD 153 JVC 185 KENWOOD 185 KENSINGTON 406 KEYSPAN 297 LITE-TOUCH 208 257 LUTRON 158 159 077 MAKITA 186 201 MICROSOFT/XBOX 408 107 MINDPATH 205 NILES 160 187 NSM 161 PIANO DISC PLUS 085 POLKAUDIO 162 RUSSOUND 081 SCIENTIFIC ATLANTA 163 156 SIMA 082 SOLO ELECTRONICS 207 SOMFY 078 079 SONY 164 165 166 261 262 STARCOM 153 TURBOSCAN 167 VELODYNE 203 X-10 183 093 XANTECH 168 169 170 171 172 188 189 AUX-TAPE AIWA 015 071 100 114 CARVER 006 008 027 024 036 DENON 105 227 229 FISHER 064 GOLDSTAR 011 HARMAN KARDON 233 JVC 106 116 239 240 KENWOOD 005 013 023 026 064 145 146 181 190 LINN 124 LUXMAN 035 137 139 MAGNAVOX 027 AUX

MCINTOSH 238 MITSUBISHI 242 243 NAD 029 048 NAKAMICHI 244 245 025 ONKYO 002 012 016 017 018 019 115 OPTIMUS 026 054 055 PANASONIC 007 010 032 088 195 PHILIPS 027 087 PIONEER 003 039 047 050 066 098 222 QUASAR 007 088 SANSUI 027 113 119 224 SHARP 026 057 131 175 181 SHERWOOD 038 004 028 030 033 034 SONY 020 022 052 084 089 TEAC 009 059 212 TECHNICS 007 010 076 088 109 122 193 TOSHIBA 112 VICTOR 106 YAMAHA 021 026 031 067 040 AUX-Media PC Controls DELL 261 262 GATEWAY 261 262 HAUPPAUGE 294 295 HP 261 262 KEYSPAN 297 SONY 261 262 TOSHIBA 261 262 WINBOOK 261 262 AUX - XBox Controls MICROSOFT/XBOX 408 107 AUX-iPod Controls APPLE/iPod 401 BOSE 409 KENSINGTON 406 POWER/OFF OFF POWER/ON ON VOL+ VOL+ VOL- VOL- MUTE MUTE CH+ CH+ CH- CH- PREV CH PREV CH TV/VCR TV/VCR MENU MENU CH GUIDE GUIDE DISPLAY INFO CANCEL EXIT UP UP DOWN DOWN SELECT SELECT LEFT LEFT RIGHT RIGHT 1 1 / SLEEP 2 2 / 6.7 CH 3 3 / TEST 4 4/ THX 5 5 / DD 6 6 / DTS 7 7 / LOGIC 8 8 / ST 9 9 / SURR 0 0 / TAPE 2 10 +10 / VCR 4 ENTER ENT / PH PIP ON/OFF MODE+ PIP SWAP SUB+ PIP POSITION CENTER+ PIP CH+ REAR+ PIP OFF MODE- PIP SIZE SUB- PIP FREEZE CENTER- PIP CH- REAR- INPUT/ANT Press SHIFT first, then press TV/VCR button. CAPTION Press SHIFT first, then press MENU button. AUTO CH Press SHIFT first, then press GUIDE button. SOUND Press SHIFT first, then press INFO button. RESET Press SHIFT first, then press EXIT button. ADD Press SHIFT first, then press UP button. DELETE Press SHIFT first, then press DOWN button. SLEEP Press SHIFT first, then press 1/SLEEP button. RATIO Press SHIFT first, then press 2/6.7CH button. RGB INPUT Press SHIFT first, then press 3/TEST button. COMPONENT Press SHIFT first, then press 4/THX button. MODE Press SHIFT first, then press 5/DD button. WIDE Press SHIFT first, then press 6/DTS button. S-VIDEO INPUT Press SHIFT first, then press 7/LOGIC button. VIDEO1 INPUT Press SHIFT first, then press 8/ST button. VIDEO2 INPUT Press SHIFT first, then press 9/SURR button. TV Locations BUTTON LOCATION COMMAND

2 2 / 6.7 CH 3 3 / TEST 4 4/ THX 5 5 / DD 6 6 / DTS 7 7 / LOGIC 8 8 / ST 9 9 / SURR 0 0 / TAPE 2 10 +10 / VCR 4 ENTER/MUSIC ENT / PH FAV MODE+ DAY+ SUB+ PAGE+ CENTER+ HELP REAR+ LOCK/PPV MODE- DAY- SUB- PAGE- CENTER- SETTINGS REAR- RECORD Press SHIFT first, then press STOP/REC button. A Press SHIFT first, then press 1/SLEEP button. B Press SHIFT first, then press 2/6.7CH button. C Press SHIFT first, then press 3/TEST button. POWER/OFF OFF POWER/ON ON SKIP+ CH+ SKIP- CH- EJECT PREV CH MENU MENU PROGRAM GUIDE DISPLAY INFO CLEAR EXIT UP UP DOWN DOWN SELECT SELECT LEFT LEFT RIGHT RIGHT SCAN- / REW REW SCAN+ / FF FF STOP STOP/REC PLAY PLAY PAUSE PAUSE 1 1 / SLEEP 2 2 / 6.7 CH 3 3 / TEST 4 4/ THX 5 5 / DD 6 6 / DTS 7 7 / LOGIC 8 8 / ST 9 9 / SURR 0 0 / TAPE 2 10 +10 / VCR 4 ENTER ENT / PH REPEAT MODE+ A/B REPEAT SUB+ RANDOM CENTER+ RETURN REAR+ TITLE MODE- TIME SUB- MEMO CENTER- AUDIO REAR- STEP+ Press SHIFT first, then press CH+ button. STEP- Press SHIFT first, then press CH- button. TOP MENU Press SHIFT first, then press MENU button. SETUP Press SHIFT first, then press GUIDE button. SEARCH Press SHIFT first, then press INFO button. SLOW- Press SHIFT first, then press REW button. SLOW+ Press SHIFT first, then press FF button. REC Press SHIFT first, then press STOP/REC button. ANGLE Press SHIFT first, then press 1/SLEEP button. SUB ON/OFF Press SHIFT first, then press 2/6.7CH button. SUBTITLE Press SHIFT first, then press 3/TEST button. PICTURE Press SHIFT first, then press 4/THX button. SURR Press SHIFT first, then press 5/DD button. ZOOM Press SHIFT first, then press 6/DTS button. DVD Locations BUTTON LOCATION

2 2 / 6.7 CH 3 3 / TEST 4 4/ THX 5 5 / DD 6 6 / DTS 7 7 / LOGIC 8 8 / ST 9 9 / SURR 0 0 / TAPE 2 10 +10 / VCR 4 SLOW MODE+ SLOW+ SUB+ TRK+ CENTER+ PROGRAM REAR+ AUTO TRK MODE- SLOW- SUB- TRK- CENTER- RESET REAR- INPUT Press SHIFT first, then press TV/VCR button. RECORD Press SHIFT first, then press STOP/REC button. X2 PLAY Press SHIFT first, then press PLAY button. EJECT Press SHIFT first, then press PAUSE button. SLEEP/TIMER Press SHIFT first, then press 1/SLEEP button. CLOCK/COUNT Press SHIFT first, then press 2/6.7CH button. COUNT RESET Press SHIFT first, then press 3/TEST button. AUTO CH Press SHIFT first, then press 4/THX button. F.ADV Press SHIFT first, then press 5/DD button. VCR PLUS Press SHIFT first, then press 6/DTS button. INDEX Press SHIFT first, then press 7/LOGIC button. ADD Press SHIFT first, then press 8/ST button. DELETE Press SHIFT first, then press 9/SURR button. TAPE SPEED Press SHIFT first, then press 0/TAPE2 button. POWER/OFF OFF POWER/ON ON VOL+ VOL+ VOL- VOL- MUTE MUTE PRESET+ CH+ PRESET- CH- SCAN PREV CH BAND,FM/AM TV/VCR MODE MENU DISPLAY GUIDE OSD INFO CLEAR EXIT UP UP DOWN DOWN SELECT SELECT LEFT LEFT RIGHT RIGHT SCAN- / REW REW SCAN+ / FF FF STOP STOP/REC PLAY PLAY PAUSE PAUSE 1 1 / SLEEP 2 2 / 6.7 CH 3 3 / TEST 4 4/ THX 5 5 / DD 6 6 / DTS 7 7 / LOGIC 8 8 / ST 9 9 / SURR 0 0 / TAPE 2 10 +10 / VCR 4 ENTER ENT / PH MODE+ MODE+ SUB+ SUB+ CENTER+ CENTER+ REAR+ REAR+ MODE- MODE- SUB- SUB- CENTER- CENTER- REAR- REAR- TUNER Input Press SHIFT first, then press AUD button. CD Input Press SHIFT first, then press CD button. DVD Input Press SHIFT first, then press DVD button. AUX Input Press SHIFT first, then press AUX button. Video 3 Input Press SHIFT first, then press SAT button. Video 2 Input Press SHIFT first, then press TV button. Video 1 Input Press SHIFT first, then press VCR button. TAPE Input Press SHIFT first, then press CBL button. HALL Press SHIFT first, then press MENU button. THEATER Press SHIFT first, then press GUIDE button. CATHEDRAL Press SHIFT first, then press INFO button. PARTY Press SHIFT first, then press EXIT button. NIGHT CLUB Press SHIFT first, then press UP button. CHURCH Press SHIFT first, then press DOWN button. JAZZ Press SHIFT first, then press SELECT button. DISCO Press SHIFT first, then press LEFT button. OPERA/ARENA Press SHIFT first, then press RIGHT button. AUDIO Locations COMMAND BUTTON LOCATION

SLEEP Press SHIFT first, then press 1/SLEEP button. 5/6/7 CH Press SHIFT first, then press 2/6.7CH button. TEST Press SHIFT first, then press 3/TEST button. THX Press SHIFT first, then press 4/THX button. DOLBY DIGITAL Press SHIFT first, then press 5/DD button. DTS Press SHIFT first, then press 6/DTS button. LOGIC 7 Press SHIFT first, then press 7/LOGIC button. STEREO Press SHIFT first, then press 8/ST button. SURR Press SHIFT first, then press 9/SURR button. TAPE2 Input Press SHIFT first, then press 0/TAPE2 button. Video 4 Input Press SHIFT first, then press +10/VCR4 button. PHONO Input Press SHIFT first, then press ENT/PH button. BASS+ Press SHIFT first, then press MODE+ button. TREBLE+ Press SHIFT first, then press SUB+ button. SURR+ Press SHIFT first, then press CENTER+ button. DELAY+ Press SHIFT first, then press REAR+ button. BASS- Press SHIFT first, then press MODE- button. TREBLE- Press SHIFT first, then press SUB- button. SURR- Press SHIFT first, then press CENTER- button. DELAY- Press SHIFT first, then press REAR- button. SAT Locations POWER/OFF OFF POWER/ON ON VOL+ VOL+ VOL- VOL- MUTE MUTE CH+ CH+ CH- CH- PREV CH PREV CH INPUT/ANT TV/VCR MENU MENU GUIDE GUIDE INFO INFO EXIT EXIT UP UP DOWN DOWN SELECT SELECT LEFT LEFT RIGHT RIGHT REW REW FF FF STOP STOP/REC PLAY PLAY PAUSE PAUSE 1 1 / SLEEP 2 2 / 6.7 CH 3 3 / TEST 4 4/ THX 5 5 / DD 6 6 / DTS 7 7 / LOGIC 8 8 / ST 9 9 / SURR 0 0 / TAPE 2 10 +10 / VCR 4 ENTER ENT / PH FAV MODE+ SEARCH SUB+ FETCH CENTER+ VIDEO REAR+ ALT AUDIO MODE- PROGRAM SUB- HELP CENTER- INTERACTIVE REAR- RECORD Press SHIFT first, then press STOP/REC button. COMMAND BUTTON LOCATION

REW SCAN+/ FF FF STOP STOP/REC PLAY PLAY PAUSE PAUSE 1 1 / SLEEP 2 2 / 6.7 CH 3 3 / TEST 4 4/ THX 5 5 / DD 6 6 / DTS 7 7 / LOGIC 8 8 / ST 9 9 / SURR 0 0 / TAPE 2 10 +10 / VCR 4 ENTER ENT / PH DISC1 MODE+ DISC2 SUB+ DISC3 CENTER+ DISC SKIP+ REAR+ DISC4 MODE- DISC5 SUB- DISC6 CENTER- DISC SKIP- REAR- REPEAT Press SHIFT first, then press 1/SLEEP button. INTRO Press SHIFT first, then press 2/6.7CH button. DISC Press SHIFT first, then press 3/TEST button. TIME Press SHIFT first, then press 4/THX button. POWER/OFF OFF POWER/ON ON VOL+ VOL+ VOL- VOL- MUTE MUTE (A)REW REW (A)FF FF (A)STOP STOP/REC (A)PLAY PLAY (A)PAUSE PAUSE 1 1 / SLEEP 2 2 / 6.7 CH 3 3 / TEST 4 4/ THX 5 5 / DD 6 6 / DTS 7 7 / LOGIC 8 8 / ST 9 9 / SURR 0 0 / TAPE 2 10 +10 / VCR 4 ENTER ENT / PH (B)FF MODE+ (B)PLAY SUB+ (B)PLAY BACK CENTER+ DECK A REAR+ (B)REW MODE- (B)STOP SUB- (B)REC CENTER- DECK B REAR- (A)REC Press SHIFT first, then press STOP/REC button. (A)PLAY BACK Press SHIFT first, then press PLAY button. DIRECTION A Press SHIFT first, then press REAR+ button. DIRECTION B Press SHIFT first, then press REAR- button. AUX Locations COMMAND BUTTON LOCATION

Warranty/Specifications Frequently Asked Questions Why does the display change whenever you press the buttons at the top of the remote? The RF10 is actually eight remote controls in one. The LCD display shows you which of your components it is currently set to control. When you press one of the eight COMPONENT buttons (those labeled AUDIO, CD, DVD, etc.), the RF10 changes the functions of all of other buttons to control that component. Why does the display flash at me sometimes? The RF10 has an extra “hidden” command (usually a power user or hobbyist feature) on some of your buttons. This command is issued instead of the normal command if you press the SHIFT button first. Once you have pressed the SHIFT button, the display will flash for ten seconds. If you press it by accident, you can stop the SHIFT flashing by pressing the SHIFT button or the LIGHT button. Can I program the RF10 on a computer? No, the RF10 is only programmed by the methods explained in this manual and the Quick Setup DVD Guide. What is a “macro” button? A “macro” is a button on the RF10 that you setup to make a lot of things happen when you press it. For example, to watch a DVD in most home theaters requires several remote controls and many button presses (power up the TV, power up the surround sound, power up the DVD player, set the TV to the correct video input, set the surround sound to the correct audio input and finally; press play on the DVD player remote control). Instead of pressing all of those buttons one at a time, the RF10 enables you to setup one button that does all those steps automatically with one press. For more information on how and why you should setup macro buttons, watch the Quick Setup DVD Program Guide or refer to pages 19 - 20 in this Manual. If the batteries run out, will I lose my settings? No. The RF10 stores all of your settings in non-volatile FLASH memo- ry. You could remove the batteries for months, replace them at your convenience, and the RF10 would still remember your settings. Who can I call for more answers? The Universal Remote Control Technical Support and Customer Service staff are ready to answer any questions you might have. Call us at 1-914-835-4484 Monday - Friday, 9AM to 6PM (EST) Warranty Universal Remote Control’s MastercontrolTM RF10 is cov- ered against any manufacturers defects or workmanship for a period of one year from the date of purchase if pur- chased from an authorized Universal Remote Control deal- er. Units purchased from online auction sites or other unauthorized resellers have no warranty. This warranty does not cover the following items: - Damage from misuse, neglect, or acts of nature - Products that have been modified or incorporated into other products - Products purchased more than 12 months ago - Units purchased from unauthorized dealers or companies Specifications Learning Capability - 704 IR commands at standard frequencies (15kHz to 100kHz) Macro Capability - 10 Macros of up to 50 steps each IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment RF Range (radio frequency): 50 to 100 feet, depending upon the environment RF Frequency: 418MHz Weight: 7.1 oz. (with batteries) Size: 8.5” x 2.5” x 1” Batteries: Four AAA Alkaline batteries included LCD Size: 1.25” x 0.5”

Harrison, NY 10528 Phone: 1-914-835-4484 FAX: 1-914-835-4532 www.universalremote.com OCE-0046A_rev01