Garmin 705 Quick Start Manual
Read Online
Read the Garmin 705 Quick Start Manual online using the built-in PDF viewer.
Text of the manual
Your nüvi unit
See the Important Safety and Product Information guide in the product box for product warnings and
other important information.
Speaker
GPS antenna
Mini-USB
connector
Serial number (remove cradle
to view serial number)
External antenna
connector
SD™ card slot
Headphone/audio
out jack
Microphone
Power key:
slide to the left to turn on/off the unit;
slide to the right to lock the screen
Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the vehicle
when exiting or store it out of direct sunlight.
Before mounting the nüvi, see the Important Safety and Product Information for information about laws
pertaining to windshield mounting.
Garmin® and nüvi® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries.
These trademarks may not be used without the express permission of Garmin. The Bluetooth® word mark and
logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. SD™ is a
trademark of the SD Card Association.
Step 1: Mount the nüvi
1. Remove the clear plastic from the suction
cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.
2. Place the suction cup on the windshield.
3. Plug the vehicle power cable into the
power connector on the right side of the
cradle.
Cradle
Power cable
4. Snap the cradle onto the suction cup
arm.
Suction cup mount
5. Flip the lever back, toward the
windshield.
6. Fit the bottom of your nüvi into the
cradle.
7. Tilt the nüvi back until it snaps into place.
8. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it
is plugged in and your vehicle is running.
9. If you are using a traffic receiver in
Europe, secure the antenna on the
traffic receiver to the windshield using
the suction cups. (The traffic receiver is
included in some nüvi packages.)
Step 2: Configure the nüvi
To turn on your nüvi, slide the
Power
key to the left. Follow the on-screen
instructions.
Step 3: Acquire Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the nüvi.
Acquiring satellite signals may take a few
minutes. The
bars indicate GPS
satellite strength. When one bar is green, the
nüvi has acquired satellite signals. Now you
can select a destination and navigate to it.
Step 4: Use the nüvi
➊
➋
➌
➍
➏
➒
➑
➐
➎
➊ GPS satellite strength.
➋ Bluetooth® technology status.
➌ Battery status.
➍ Current time.
➎ Touch to find a destination.
➏ Touch to view the map.
➐ Touch to make a call when connected
to a compatible mobile phone (not
available on nüvi 755).
➑ Touch to adjust the volume.
➒ Touch to use the tools such as media
players, settings, and Help.
Finding Points of Interest
1. Touch Where to? > Points of Interest.
2. Select a category and a subcategory.
3. Select a destination, and touch Go!.
To enter letters contained in the name, touch
Where to? > Points of Interest > Spell
Name.
To search for a location in a different area,
touch Where to? > Near.
Adding a Stop
1. With a route active, touch Menu > Where
to?.
2. Search for the extra stop.
3. Touch Go!.
4. Touch Add as via point to add this stop
before your destination.
Tip: To add more than one stop, edit the
current route. Touch Where to? > Custom
Routes.
Following Your Route
Your route is marked with a magenta line.
As you travel, your nüvi guides you to your
destination with voice prompts, arrows on
the map, and directions at the top of the
map. If you depart from the original route,
your nüvi recalculates the route and provides
new directions.
Touch and drag the map to view a different
area of the map. A speed limit icon could
appear as you travel on major roadways.
➍
➌
➋
➊
➐
➏
➎
➊ Touch to view the Next Turn page or the
Lane Assist page (if available).
➋ Touch to view the Turn List page.
➌ Touch to zoom in and out.
➍ Touch to view the Where Am I? page.
➎ Touch to view the Trip Computer page.
➏ Touch to return to the Menu page.
➐ Touch to change the data displayed here.
Using FM TMC Traffic
Note: Garmin is not responsible for the
accuracy of the traffic information.
The FM traffic receiver, which is integrated
in the vehicle power cable, is included in
some nüvi packages.
The traffic receiver and the nüvi must be
in data range of an FM station transmitting
TMC (Traffic Message Channel) data to
receive traffic information. For information
about traffic receivers and coverage areas,
go to www.garmin.com/traffic.
Note: Heated (metallized) windows
could degrade the performance of the
traffic receiver.
Note: You do not need to activate the
subscription included with your FM
traffic receiver (if it came with one). The
subscription activates automatically after
your nüvi receives traffic signals from the
pay service provider.
When calculating your route, the
nüvi examines the current traffic and
automatically optimizes the route for the
shortest time. You might still be routed
through traffic if no alternative roads exist.
If a severe traffic delay occurs on your
route while you are navigating, the nüvi
automatically recalculates the route.
When you receive traffic information, a
traffic icon appears in the top left corner of
the Map page. The traffic icon changes color
to indicate the severity of traffic conditions
on your route or the road you are currently
traveling. Touch the icon to view the Traffic
menu.
Viewing Advertisements
In North America, if your nüvi package
includes a traffic receiver, you will receive
advertisements and coupons. Touch the
advertisement on the screen to search
for the nearest location related to that
advertisement.
caution: Do not attempt to write down
the coupon codes while driving.
Making Hands-Free Phone
Calls
Bluetooth wireless technology is not
available on nüvi 755 models. Using
Bluetooth wireless technology, your nüvi
can wirelessly connect to your mobile phone
to become a hands-free device. To pair and
connect, your phone and your nüvi must be
turned on and be within 10 meters of each
other.
Pairing the nüvi with Your
Mobile Phone
1. Confirm that your phone is supported by
the nüvi. (Go to www.garmin.com
/bluetooth.)
2. From the Menu page, touch Tools >
Settings > Bluetooth > Add.
3. Enable the Bluetooth component on your
phone and enable Find Me/Discoverable/
Visible mode. These settings might be in
a Bluetooth, a Connections, or a Hands-
free menu.
4. Touch OK on the nüvi.
5. Select your phone, and touch OK.
6. Enter the nüvi Bluetooth PIN (1234) in
your phone.
Receiving a Call
When you get a call, the Incoming Call
window opens. Touch Answer to answer the
call. The internal microphone is in the front
of the nüvi. Speak normally.
Making a Call
When your phone is connected to your nüvi,
you are ready to make phone calls. Touch
Phone to access the Phone menu.
Note: Not all phones support all features
of the nüvi Phone menu.
Calling a Number
1. Touch Phone > Dial.
2. Enter the number, and touch Dial.
3. To end the call, touch
> End Call.
Using the FM Transmitter
Before using the FM transmitter in your area, see
the FM transmitter legal notice in the owner’s
manual.
You can listen to your nüvi through the
speakers in your vehicle. From the Menu
page, select Volume > Audio Output > FM
Transmitter > OK. Select an FM channel
with a lot of static, and select the same
channel on the nüvi.
Loading Files on Your nüvi
1. Insert a SD card (optional).
2. Connect the USB cable.
3. Transfer files to the nüvi.
4. Eject and unplug the USB cable.
Listening to MP3 Files
1. Touch Tools > Media Player.
2. Touch Source to open the MP3 player.
3. Touch Browse.
4. Touch a category.
5. Touch Play All.
Locking Your nüvi
1. Touch Tools > Settings > Security.
2. Touch the button below Garmin Lock.
3. Enter a 4-digit PIN and drive to a security
location.
NOTE: If you forget your PIN and your
security location, you must send your nüvi
and valid product registration or proof
of purchase to Garmin to get your nüvi
unlocked.
Resetting the nüvi
If the nüvi screen stops functioning, turn the
nüvi off and on again. If this does not help,
slide the
Power key to the left and hold
it for 8 seconds. Turn the nüvi back on. The
nüvi should operate normally.
More Information
For more information about your nüvi, touch
Tools > Help. Download the latest version
of the owner’s manual from www.garmin
.com. For information about accessories,
go to http://buy.garmin.com or contact your
Garmin dealer.
August 2008
Part Number 190-00955-01 Rev. A
Printed in Taiwan