Garmin c340 Quick Reference Manual

Text of the manual

quick reference guide

guide de référence rapide © 2007 Garmin Ltd. or its subsidiaries July 2007 190-00437-50 Rev. B

Warning: This product contains a non-user-

replaceable lithium-ion battery. Do not remove or attempt to remove the battery. Doing so could result in risk of battery fire or damage and injury. To prevent damage and risk of fire due to high temperatures, remove the unit from the vehicle or store it out of direct sunlight. For more information, see www.garmin.com\safety. Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or friction mounting options should be used. Step 1: Mount Your c340 To ensure a tight grip, clean and dry your windshield before mounting the suction cup. 4. Fit the bottom of your c340 into the cradle of the suction cup mount. 5. Tilt your c340 back until it snaps in place. 4 Tension knob 5 1. Plug the small end of the cable into the mount and the other end in a 12-Volt receptacle in your vehicle. 2. Place the suction cup on the windshield. 3. Flip the lever back, toward the windshield. 2 3 1 If necessary, use the tension knob to loosen or tighten the tension in the mount to improve your viewing angle.

Step 2: Configure Your c340

To manually turn on your c340, press and hold the Power button on the side of the unit. The first time you turn on the unit, follow the on-screen instructions to set up your c340. You only have to do this once. Step 3: Find Your Destination Tip: Touch and to see more choices. Touch Where to. Select a category. Select a destination. Touch Go. Enjoy the route!

Step 4: Follow Your Route

Follow the route to your destination using the Map page. As you travel, your c340 guides you to your destination with voice prompts, arrows on the map, and directions at the top of the Map page. If you depart from the original route, your c340 recalculates the route and provides new route instructions. A checkered flag marks your destination. Follow the arrows as you take turns. Your route is marked with a magenta line. You can add a stop (via point) to your route. The c340 gives you directions to the via point and then to your final destination. Search for the extra stop. Touch Go. Touch an option.

Viewing the �Map Pa��

Map Page From the Menu page, touch View map to open the Map page. The position icon shows your current location. Touch buttons on the Map page to see additional information. Trip Information Page Current Route Page Next Turn Page Map Page while Navigating a Route Touch Arrival or Speed to open the Trip Information page. Touch Turn In to open the Next Turn page. Touch the text bar to open the Current Route page. Touch to zoom out. Touch to zoom in. Touch Menu to return to the Menu page.

Saving Places You Find

After you have found a place you want to save, touch Save. Touch OK. The place is save in My Locations > Favorites. Finding Saved Places From the Menu page, touch Where to > My Locations > Favorites. Select a place. Touch Go.

Setting a Home Location

Touch Where to > My Locations. Touch Set Home. Touch an option. Traffic Information with an FM TMC Traffic Receiver Using a Garmin FM TMC Traffic Receiver, your c340 can receive and use traffic information broadcast over the FM Radio Data System. For more information about Garmin Traffic Receivers, visit www.garmin.com/fmtraffic. Connecting the GTM 10 to Your c340 Place your c340 in the mount and plug it into the 12-volt adapter. Plug the USB cable from the GTM 10 into the USB connector on the side of the c340. Viewing Traffic Events From the Menu page, touch to display a list of traffic events. The traffic symbols appear on the Map as well.

Adjusting the Backlight

Brightness From the Menu page, touch to adjust the level of the backlight. When you are finished, touch OK. Adjusting the Volume To adjust the volume, turn the volume knob, located above the power button. Resetting Your c340 If your c340 stops responding, turn it off and back on. If this does not help, reset the c340. 1. Disconnect the power and USB cables to remove external power. 2. Place your thumbnail in the groove located under the Garmin logo on the faceplate and gently pull off the faceplate. 3. Press the Reset button for about 3 seconds. 4. Connect the c340 to a power source using the power cable. The c340 should automatically turn back on and operate normally. More Information For more information about your c340, refer to the English owner’s manual located at www.garmin.com/products/sp340. Click Manuals > Download. Contact your Garmin dealer for a French owner’s manual. Garmin®, StreetPilot®, and c340™ are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Volume knob Power button USB cable connector

avertissement: Ce produit contient une

batterie au lithium-ion non remplaçable par l’utilisateur. Ne retirez pas la batterie et n’essayez pas non plus de la retirer, au risque de provoquer des blessures, un incendie ou autre dommage. Pour prévenir tout dommage et risque d’incendie résultant de températures élevées, sortez l’appareil du véhicule ou rangez-le dans un endroit non exposé aux rayons du soleil. Pour plus d’informations, consultez la page www.garmin.com\safety. Vérifiez les lois en vigueur dans votre état avant d’installer ce produit. Actuellement, les états de Californie et du Minnesota interdisent aux automobilistes d’utiliser des supports à ventouse sur leur pare-brise pendant qu’ils conduisent. Dans ce cas, utiliser les autres options de montage sur tableau de bord ou par friction de Garmin. Etape 1 : Installation de votre navigateur c340 Afin de garantir une adhérence maximale, nettoyez et séchez soigneusement votre parebrise avant d’installer la ventouse. Si nécessaire, utilisez le bouton de réglage de tension pour serrer ou desserrer la tension du support afin d’améliorer votre angle de vision. 4. Insérez la base de votre navigateur c340 dans le logement du support à ventouse. 5. Inclinez votre navigateur c340 vers l’arrière jusqu’à ce qu’il s’enclenche. 4 Bouton de réglage de tension 5 1. Branchez le câble sur une prise de votre véhicule. 2. Positionnez la ventouse sur votre pare- brise. 3. Faites basculer le levier vers l’arrière, en direction du pare-brise. 2 3 1

Etape 2 : Configuration de votre navigateur c340

Pour allumer votre navigateur c340 manuellement, appuyez sur le bouton d’Alimentation situé sur le côté de l’appareil et maintenez-le enfoncé. Lorsque que vous mettez votre appareil en marche pour la première fois, suivez les informations affichées à l’écran pour procéder à l’installation de votre navigateur c340. Vous ne devrez accomplir cette étape qu’une seule fois. Etape 3 : Recherche de votre destination Truc: Touchez et pour afficher davantage d’options.. Touchez sur Where to (Où trouver). Sélectionnez une catégorie. Sélectionnez une destination. Touchez sur Go (Allez). Bonne route !

Etape 4 : Parcours de votre itinéraire

Pendant le trajet, votre navigateur c340 vous guide vers votre destination en vous fournissant des instructions vocales, en insérant des flèches représentant les virages sur la carte et en affichant des indications au début de la page de la carte. Si vous vous écartez de votre itinéraire initial, un message vocal vous informe que vous évoluez hors itinéraire ; le navigateur c340 crée ensuite un nouvel itinéraire. Vous pouvez ajouter un point intermédiaire à l’itinéraire. Le c340 indique comment vous rendre jusqu’au point intermédiaire, puis jusqu’à la destination finale. Votre itinéraire est représenté par une ligne rouge. Suivez les flèches représentant les virages. Un drapeau à damiers identifie votre destination. Recherchez l’arrêt supplémentaire. Touchez sur Go (Allez). Touchez an option.

Affichage de la page de la carte

Sur la page Menu, appuyez sur View map (Afficher la carte) pour ouvrir la page de la carte. L’icône Position affiche votre position actuelle. Appuyez sur les boutons de la page de la carte pour obtenir des informations supplémentaires. Page Trip Information (Informations sur le trajet) Page Current Route (Itinéraire actuel) Page Next Turn (Prochain virage) Page de la carte lors du parcours d’un itinéraire Touchez stur Arrival (Arrivée) ou Speed (Vitesse) pour ouvrir la page Trip Information (Informations sur le trajet). Touchez sur Turn In (Prochain virage) pour ouvrir la page Next Turn (Prochain virage). Touchez sur la barre de texte pour ouvrir la page Current Route (Itinéraire actuel). Touchez sur pour effectuer un zoom arrière. Touchez sur pour effectuer un zoom avant. Touchez sur Menu pour revenir à la page Menu.

Enregistrement de lieux recherchés

Lorsque vous avez trouvé un lieu que vous souhaitez enregistrer, appuyez sur Save (Enregistrer). Appuyez sur OK dans la fenêtre. Le lieu est enregistré dans My Locations (Emplacements favoris) > Favorites (Favoris). Recherche de lieux enregistrés Sur la page Menu, touchez sur Where to (Où trouver) > My Locations (Emplacements) > Favorites (Favoris). Sélectionnez un lieu. Touchez sur Go (Allez).

Définition du domicile

Touchez sur Where to (Destination) > My Locations (Emplacements favoris). Touchez Set Home (Définir le domicile). Touchez une option. Informations routières avec un récepteur TMC FM À l’aide d’un récepteur TMC FM, le c340 peut recevoir et utiliser les informations routières diffusées sur le système de radiocommunication de données (RDS) FM. Pour plus d’informations sur le récepteur FM, visitez le site www.garmin.com/fmtraffic. Connexion du GTM 10 à votre c340 Connectez le récepteur FM à votre c340. Branchez le câble mini-USB dans le connecteur mini-USB situé sur le côté du c340. Affichage des événements d’informations routiéres Dans la page Menu, touchez sur pour afficher une liste des événements d’informations routières.

Réglage de la luminosité du

rétroéclairage Sur la page Menu, touchez sur to adjust the level of the backlight. Lorsque vous avez terminé, touchez sur OK. Réglage du volume Pour régler le volume, tournez le bouton de réglage du volume situé au dessus du bouton d’Alimentation. Réinitialisation du navigateur c340 Si le navigateur c340 ne répond plus, mettez-le hors tension, puis de nouveau sous tension. Si le blocage de l’appareil persiste, réinitialisez-le. 1. Déconnectez la source d’alimentation ainsi que les câbles USB. 2. Insérez l’ongle de votre pouce dans la rainure située sous le logo Garmin de la façade de l’appareil, puis retirez la façade. 3. Appuyez sur le bouton Reset pendant environ 3 secondes. 4. Branchez le navigateur c340 à une source d’alimentation à l’aide du câble prévu à cet effet. Le navigateur c340 doit automatiquement se remettre sous tension et fonctionner normalement. Informations supplémentaires Pour plus d’informations, reportez-vous au manuel d’utilisation disponible chez votre revendeur Garmin. Garmin®, StreetPilot®, et c340® sont des marques commerciales de Garmin Ltd. ou de ses filiales, déposées aux Etats-Unis et dans d’autres pays. Bouton de réglage du volume Bouton d’Alimentation Connecteur de câble USB

Pour obtenir les dernières mises à jour gratuites des logiciels (à l’exclusion

des données cartographiques) tout au long de la vie de vos produits Garmin, visitez le site Web de Garmin à l’adresse www.garmin.com. For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9RB UK Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00437-50 Rev. B

Other GPS Manuals