Sharp AR-M237 - B/W Laser - Copier Copier Manual

Client settings (part 3) Settings in Windows NT 4.0 If your operating system is Windows NT 4.0, establish settings as follows in the printer properties after installing the printer driver. For the procedure for installing the printer driver, see "INSTALLING THE SOFTWARE" in the Software Setup Guide. 1 Click the "Start" button, select "Settings", and then click "Printers". 2 Click the "SHARP AR-XXXX" printer driver icon and select "Properties" from the "File" menu. The printer properties will appear. 3 Click the "Ports" tab, and click the "Add Port" butto ...

The online manual provides detailed instructions for operating the machine as a printer. View the online manual when you use the printer function after the initial setup is completed. Contents of the online manual The contents of the online manual are as follows. How to use the online manual: Explains how to use the online manual. Print: Provides information on how to print a document. Printer sharing: Explains how to configure the machine for use as a shared printer. Troubleshooting: Provides instructions on how to solve driver or software problems. 1 Insert th ...

correctly installed by Plug and Play (Windows 2000/XP) In Windows 2000/XP, if the printer driver cannot be correctly installed by Plug and Play (for example, Plug and Play takes place without copying the required files for the printer driver installation), follow these steps to remove unneeded devices and then install the printer driver as explained in "INSTALLING THE SOFTWARE" (p. 3). 1 Click the "start" button, click "Control Panel", and then click "Performance and Maintenance". In Windows 2000, click the "Start" button, select "Settings", and ...

number. • To insert a pause between digits of the number, touch the [PAUSE] key. The pause appears as a hyphen "-". See page 97 to set the duration of the pause. • If you make a mistake, press the [CLEAR] key ( ) to clear one digit at a time, and then enter the correct digit(s). • If you are not going to enter a sub-address and password after the fax number, go to step 12. 10 If you need to enter a sub-address, touch the [SUB ADDRESS] key and then enter the sub-address with the numeric keys. When you touch the [SUB ADDRESS] key, a sl ...

11 When the interface selection screen appears, select "Parallel" and click the "Next" button. 12 Select the printer port and click the "Next" button. Select "LPT1" for the printer port. 13 When the model selection window appears, select model name of your machine and click the "Next" button. For the model name of your machine, see "PART NAMES AND FUNCTIONS" in the operation manual for copier. 14 Click the "Yes" button. 15 When "The installation of the SHARP software is complete" appears, click the "OK" button. 16 Begin the installation of the PC-FAX driver (if "PC-FA ...

COVER COPY Cover copy mode is used to add a cover to the front or back, or both the front and back, of a multipage document. To use cover copy mode, the RSPF must be used. Copying onto a cover Not copying onto a cover One-sided originals Back cover (no copying) Front cover (can copy onto front side) One-sided copies (copying onto a cover) Two-sided originals SHARP SHARP Cover original 1 2 3 4 1 2 3 4 3 4 5 1 2 Cover original SHARP Back cover (no copying) Front cover (can copy onto front side) SHARP 1 2 3 4 5 One-sided originals Two-sided copies (copying onto a cov ...