Sharp AR-M237 - B/W Laser - Copier Key Operator's Manual

This chapter explains key operator programs that are used for the printer function. These programs can only be configured on models that have the printer function. PRINT SETTINGS DEFAULT SETTINGS These programs allow you to change certain default settings for the printer function. The "DEFAULT SETTINGS" consist of the following programs: G PROHIBIT NOTICE PAGE PRINTING G PRINT DENSITY LEVEL G PROHIBIT TEST PAGE PRINTING G ROTATED PRINT G FORCED OUTPUT OF PRINT G EXCLUDE BYPASS-TRAY FROM ATS G DISABLE DEFAULT SETTING CHANGES PROHIBIT NOTICE PAGE PRINTING This program ...

This chapter explains the key operator programs that are used for copy mode. COPY SETTINGS "COPY SETTINGS" consists of the following programs: G INITIAL STATUS SETTINGS G ROTATION COPY SETTING G EXPOSURE ADJUSTMENT G AUTO PAPER SELECTION SETTING G SETTING A MAXIMUM NUMBER OF COPIES G SORT AUTO SELECT G DISABLING DELETION OF JOB PROGRAMS INITIAL STATUS SETTINGS The copy settings revert to the default settings when the power switch is turned on, when the [CLEAR ALL] key ( ) is pressed, or when the auto clear time elapses. This program is used to change the default setti ...

GENERAL PROGRAMS PROGRAMS FOR COPY MODE The key operator programs that can be accessed depend on the optional equipment that is installed. Note Program name Factory default settings Page ACCOUNT CONTROL AUDITING MODE Disabled 8 TOTAL PAGES PER ACCOUNT — 8 RESETTING ACCOUNT — 8 ACCOUNT NUMBER CONTROL — 9 ACCOUNT LIMIT SETTING — 9 ACCOUNT NUMBER SECURITY Disabled 9 CANCEL JOBS OF INVALID ACCOUNTS Disabled 9 ENERGY SAVE AUTO POWER SHUT-OFF Enabled 10 AUTO POWER SHUT-OFF TIMER 60 (min.) 10 PREHEAT MODE SETTING 15 (min.) 10 TONER SAVE MODE Disabled 10 OPERATION S ...

KEYS USED IN KEY OPERATOR PROGRAMS Example: Auditing mode When a checkbox ( ) appears in front of a setting, a checkmark ( ) will appear when the checkbox is touched. This indicates that the setting is enabled. If a checkbox with a checkmark ( ) is touched, the checkmark is cleared ( ) and the setting is disabled. When a key that appears in the form is touched, the setting screen of that key will appear. If the settings continue on the following screen(s), touch the and keys to move back and forth through the screens. To return to the category selection scr ...

SCANNER MODE This chapter explains key operator programs that are used for the network scanner function. These programs can only be configured on models that have the network scanner function. SCANNER SETTINGS The "SCANNER SETTINGS" consist of the following programs: G INITIAL FILE FORMAT SETTING G INITIAL QUALITY SETTING G INITIAL RESOLUTION SETTING G DEFAULT DISPLAY SETTINGS G THE NUMBER OF DIRECT ADDRESS / SENDER KEYS DISPLAYED SETTING INITIAL FILE FORMAT SETTING Use this program to change the default file format (file type, compression mode, and number of pages per ...

to reduce your power costs. From an environmental perspective, this also helps conserve natural resources and reduce pollution. G AUTO POWER SHUT-OFF G AUTO POWER SHUT-OFF TIMER G PREHEAT MODE SETTING G TONER SAVE MODE AUTO POWER SHUT-OFF If the machine is not used for the amount of time set in "AUTO POWER SHUT-OFF TIMER", AUTO POWER SHUT-OFF will activate and switch the machine to a standby state that conserves the maximum amount of energy. This program can be used to prevent AUTO POWER SHUT-OFF from operating. ...